Search NASA⌕ Search

SEARCH · Search NASA

Results for “NIR spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Heterovalent Substitution of K 2 SrP 2 O 7 :Cr 3+ to Achieve Anti-Thermal-Quenching Broadband Near-Infrared Luminescence

Broadband near-infrared (NIR) light sources based on phosphor-converted light-emitting diodes are highly desirable for biochemical analysis and medical diagnosis applications. However, thermal quenching remains a demanding challenge for developing efficient NIR phosphors. Herein, we report the enhancement of both quantum efficiency and thermal stability in Cr 3+ -activated K 2 SrP 2 O 7 phosphors through a heterovalent substitution strategy by replacing Sr 2+ with Al 3+ in K 2 Sr 1–x Al x P 2 O 7 (0.05 ≤ x ≤ 0.2) to obtain optimized broadband NIR emission. Structural modulation via Al 3+ substitution leads to the optimized composition, K 2 Sr 0.88 Al 0.1 P 2 O 7 :0.02Cr 3+ , which emits across a broad NIR range of 650–1100 nm peaking at 807 nm with a full width at half-maximum of ∼130 nm under 448 nm excitation. Remarkably, its emission intensity at 150 °C remains 120% of the initial value at room temperature, demonstrating a rare antithermal-quenching behavior. Temperature-dependent XRD studies further reveal that Al 3+ substitution effectively suppresses lattice expansion at elevated temperatures, indicating enhanced lattice stability under thermal excitation. Detailed structural and spectral analyses show that the substitution enhances local site symmetry, reduces electron–phonon coupling, increases thermally induced absorption probability, and fortifies energetic barriers against nonradiative transitions. These synergistic effects collectively endow this NIR phosphor with a superior thermal stability. Furthermore, NIR light-emitting diodes fabricated with this phosphor exhibit strong potential for applications in information identification, nondestructive detection, and night vision technologies. This study demonstrates a local structure engineering strategy for designing thermally robust Cr 3+ -activated NIR phosphors, offering valuable insights into material discovery and NIR spectroscopy device development.

Cr3+↗
DOE OSTI2025

Polaron Delocalization and Transport in Doped Graphene Nanoribbon Thin Films

Graphene nanoribbons (GNRs) are quantum-confined π-conjugated monolayer semiconductors with attractive properties for optoelectronic applications. However, the ground- and excited-state properties of charge carriers in GNRs are still poorly understood, particularly with regards to the coupling between charges and the GNR lattice and the degree to which this coupling impacts local and macroscopic charge transport. To address this issue, we systematically correlate carrier density-dependent charge transport with spectroscopic modulations in chemically doped thin films of armchair graphene nanoribbons (9-aGNRs). This study combines Fourier transform infrared (FTIR) and ultraviolet−visible−near-infrared (UV−vis−NIR) spectroscopy with both local and macroscopic conductivity measurements to arrive at a full and self-consistent picture of transport in doped GNR thin films. Using three different molecular p-type dopants (i.e., oxidants), we demonstrate that hole polarons are the dominant quasi-particle determining charge transport in GNRs and that the degree of polaron delocalization depends sensitively on the dopant and the hole density. For all three dopants, the local conductivity probed by microwave spectroscopy substantially exceeds the long-range conductivity obtained by four-point probe measurements. Interestingly, the dopant size substantially influences charge transport at high hole densities. We ascribe this effect to different propensities for forming bipolarons with lower mobilities than polarons. Comparison of GNR transport and spectral properties to other prototypical π-conjugated semiconductors (e.g., semiconducting polymers or carbon nanotubes) benchmark the charge transport properties of GNR thin films for optoelectronic devices and applications.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

USc 2 C 2 and USc 2 NC Clusters with U–C Triple Bond Character Stabilized Inside Fullerene Cages

The chemistry of f-block metal–carbon multiple bonds is underdeveloped compared to well-established carbene complexes of the d-block transition metals. Herein, we report two new actinide-rare earth mixed metal carbides and nitrogen carbide cluster fullerenes, USc 2 C 2 @D 5h (6)-C 80 and USc 2 NC@D 5h (6)-C 80 , which contain U–C bonds with triple bond character and were successfully synthesized and characterized by mass spectrometry, UV–vis–NIR spectroscopy, Fourier transform infrared spectroscopy, single crystal X-ray diffraction, and DFT calculations. Crystallographic studies show that the two previously unreported clusters, USc 2 C 2 and USc 2 NC, are stabilized in the D 5h (6)-C 80 carbon cage and adopt unique trifoliate configurations, in which C 2 /NC units are almost vertically inserted into the plane defined by the U and two Sc atoms. Combined experimental and theoretical studies further reveal the bonding structure of USc 2 C 2 and USc 2 NC, which contain C=U(VI)=C and C=U(V)=N bonding motifs. The electronic structures of the two compounds are determined as U 6+ (Sc 2 ) 6+ (C 4– ) 2 @D 5h (6)-C 80 4– and U 5+ (Sc 2 ) 6+ (N) 3– (C) 4– @D 5h (6)-C 80 4– , respectively. Quantum-chemical studies confirm that the U–C bonds in both molecules show unprecedented multicenter triple-bond character. Furthermore, the discovery of this unique U–C multiple bond offers a deeper understanding of the fundamentals of uranium chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

High-Pressure Effects on an Octa-Hydrated Curium Complex: An Experimental and Theoretical Investigation

An octa-hydrated curium compound [Cm(H 2 O) 8 ](Hdtp)(dtp)·H 2 O (Cm1,H 2 dtp = 2,3-di(tetrazol-5-yl)pyrazine) along with its lanthanide analogues [Ln(H 2 O) 8 ](Hdtp)-(dtp)·H 2 O (Ln1, Ln 3+ = La 3+ –Nd 3+ , Sm 3+ –Lu 3+ ) were synthesized and characterized using single crystal X-ray diffraction and spectroscopic methods. Bond length analysis of VIII Cm(III)–OH 2 (where VIII refers to the coordination number) was compared to VIII Ln(III)–OH 2 (Ln 3+ = Nd 3+ and Sm 3+ ), indicating similar VIII M(III)–OH 2 bond lengths owing to the similar eight-coordinate ionic radii of these VIII M(III) cations. Owing to the reduced coordination number, the VIII Cm(III)–OH 2 bond lengths were shorter than previously reported IX Cm(III)–OH 2 bonds in [Cm(H 2 O) 9 ](CF 3 SO 3 ) 3 . The octa-aquo complexes were also characterized by solid-state UV–vis–NIR spectroscopy in addition to variable-temperature and variable-pressure photoluminescence. Variable-pressure absorption spectra of Cm1 were compared with Ln1 and show that the Cm(III) f → f transitions have a stronger dependence on pressure than that observed in Ln1 (Ln 3+ = Nd 3+ and Sm 3+ ). The experimental and computational analyses reveal that the monotonic decrease in the computed energy difference between the ground state and the first excited state corresponds to the observed red shift of the photoluminescence peak. This is accompanied by a gradual reduction in the average Cm(III)–OH 2 bond length and a delocalization of spin densities, alongside an intensified interaction involving the 5f orbitals under increasing pressure. Furthermore, these changes accommodate the new geometry and collectively modify the energy landscape, resulting in peak broadening and quenching.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A Ce 4+ Aluminum Hydride Complex

Complexes of reducing hydride ligands by high-oxidation state cerium are unknown due to the fundamental mismatch in their redox chemistry. Herein we report the synthesis, characterization, and reactivity of the first example of a Ce 4+ aluminum hydride complex. Synthetic strategies adapted from the preparation of Ce 4+ alkyl complexes facilitated the isolation of [Ce 4+ (κ 2 -H 3 AlC(TMS) 3 )(NP( t Bu) 3 ) 3 ] (CeHAl). The bonding and structure of this complex is characterized by single-crystal XRD, NMR, and UV–vis–NIR spectroscopy, and DFT computations. The fundamental reactivity profile is evaluated by cyclic voltammetry and small-molecule reactions.

anions↗
DOE OSTI2021

Spectroscopic characterization of neptunium(VI), plutonium(VI), americium(VI) and neptunium(V) encapsulated in uranyl nitrate hexahydrate

The coordination of crystalline products resulting from the co-crystallization of Np(VI), Pu(VI), Am(VI), and Np(V) with uranyl nitrate hexahydrate (UNH) has been revealed through solid-state spectroscopic characterization via diffuse reflectance UV-Vis-NIR spectroscopy, SEM-EDS, and extended X-ray absorption fine structure (EXAFS) spectroscopy. Density functional and multireference wavefunction calculations were performed to analyze the An(VI/V)O 2 (NO 3 ) 2 ·2H 2 O electronic structures and to help assign the observed transitions in the absorption spectra. EXAFS show a similar coordination between the U(VI) in UNH and Np(VI) and Pu(VI); while Am resulted in a similar coordination to Am(III), as reduction of Am(VI) occurred prior to EXAFS data being obtained. Finally, the co-crystallization of the oxidized transuranic species—penta- and hexavalent—with UNH, represents a significant advance from not only a practical standpoint in providing an elegant solution for used nuclear fuel recycle, but also as an avenue to expand the fundamental understanding of the 5f electronic behavior in the solid-state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Isostructural σ-hydrocarbyl phospholide complexes of uranium, neptunium, and plutonium

σ-Hydrocarbyl complexes of the form [M(η 5 -PC 4 Me 4 ) 2 (μ-η 1 :η 6 -CH 2 Ph) 2 K(η 6 -arene)] (M = La, Ce, Pr, U, Np, Pu; arene = benzene or toluene) were synthesised in one-pot reactions from [MI 3 (THF) 4 ], or [U(BH 4 ) 3 (toluene)] (M = U). All complexes were examined by multinuclear ( 1 H, 13 C{ 1 H}, 31 P{ 1 H}) NMR and UV-vis-NIR spectroscopy, as well as single-crystal X-ray diffraction from which molecular metal–phosphorus bonds for Np and Pu, and a σ-hydrocarbyl metal–carbon bond for Pu, have been structurally authenticated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

ThC 2 @C 82 versus Th@C 84 : unexpected formation of triangular thorium carbide cluster inside fullerenes

Synthesis of the first thorium-containing clusterfullerenes, ThC 2 @C s (6)–C 82 and ThC 2 @C 2 (5)–C 82 , is reported. These two novel actinide fullerene compounds were characterized by mass spectrometry, single-crystal X-ray diffraction crystallography, UV–vis–NIR spectroscopy, and theoretical calculations. Crystallographic studies reveal that the encapsulated ThC 2 clusters in both C s (6)–C 82 and C 2 (5)–C 82 feature a novel bonding structure with one thorium metal center connected by a C≡C unit, forming an isosceles triangular configuration, which has not been hitherto observed for endohedral fullerenes or for solid phase thorium carbides. Electronic structure calculations assign a formal electronic structure of [Th 4+ (C 2 ) 2- ] 2+ @[C 82 ] 2- , with pronounced donation bonding from (C 2 ) 2- to Th 4+ , secondary backbonding from the fullerene to thorium and Th–C double bond character in both compounds. This work presents a new family of endohedral fullerenes, MC 2 @C 2n-2 , being unexpected isomers of MC 2n , and provides broader understanding of thorium bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Neptunium (V) Solubility in WIPP Brine: Presence and Absence of WIPP-Relevant Organic and Inorganic Ligands

The oxidation state and solubility of neptunium (Np) in 5 M NaCl and high ionic strength synthetic WIPP (Waste Isolation Pilot Plant) brines were systematically investigated as a function of pCH+ (7-11) in the presence and absence of WIPP-relevant organic ligands, including EDTA (Ethylenediaminetetraacetic acid), oxalate, citrate, and acetate, as well as inorganic ligands such as borate and carbonate at a temperature of 23 ± 2°C. This study was conducted through long-term batch solubility experiments spanning approximately 950 days, using an undersaturation approach. A comprehensive set of experimental and spectroscopic techniques, including UV-VIS-NIR spectroscopy and Np L III -edge X-ray Absorption Spectroscopy (XAS), was employed to identify the solubility-controlling Np solid phases and the predominant aqueous Np species present in the samples.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Artificial Linear Brush Abrasion of Coatings for Photovoltaic Module First Surfaces

Natural soiling and the subsequent requisite cleaning of photovoltaic (PV) modules result in abrasion damage to the cover glass. The durability of the front glass has important economic consequences, including determining the use of anti-reflective and/or anti-soiling coatings as well as the method and frequency of operational maintenance (cleaning). Artificial linear brush abrasion using Nylon 6/12 bristles was therefore examined to explore the durability of representative PV first-surfaces, i.e., the surface of a module incident to direct solar radiation. Specimens examined include silane surface functionalized-, roughened (etched)-, porous silica-coated-, fluoropolymer-coated-, and ceramic (TiO2 or ZrO2/SiO2/ZrO2/SiO2)-coated-glass, which are compared to monolithic-poly(methyl methacrylate) and -glass coupons. Characterization methods used in this study include: optical microscopy, ultraviolet-visible-near-infrared (UV-VIS-NIR) spectroscopy, sessile drop goniometry, white-light interferometry, atomic force microscopy (AFM), and depth-profiling X-ray photoelectron spectroscopy (XPS). The corresponding characteristics examined include: surface morphology, transmittance (i.e., optical performance), surface energy (water contact angle), surface roughness, scratch width and depth, and chemical composition, respectively. The study here was performed to determine coating failure modes; identify characterization methods that can detect nascent failures; compare the durability of popular contemporary coating materials; identify their corresponding damage characteristics; and compare slurry and dry-dust abrasion. This study will also aid in developing an abrasion standard for the PV industry.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2025

Alkali Counterion-Dependent Crystallization of Uranium(IV)–Chloro Structural Units

The synthesis, structural characterization, and spectroscopic properties of five tetravalent uranium (U) phases including Li 6 [U 4 (μ 3 -O) 2 Cl 18 (H 2 O) 2 ]·10H 2 O (1), [U(H 2 O) 4 Cl 4 ] (2), [U(H 2 O) 4 Cl 4 ]·KCl (3), Rb 2 UCl 6 (4), and Cs 2 UCl 6 (5) are reported. Notably, a change in the U 4+ solid-state structural unit was observed based on the identity of the alkali counterion used in the synthesis. Li 1+ yielded a tetranuclear oxo-bridged cluster, [U 4 (μ 3 -O) 2 Cl 18 (H 2 O) 2 ] 6– , Na 1+ and K 1+ yielded two structurally distinct [U(H 2 O) 4 Cl 4 ] complexes, and Rb 1+ and Cs 1+ resulted in [UCl 6 ] 2– as the dominant phases. The spectroscopic properties of the compounds were analyzed using Raman and UV–vis–NIR absorption spectroscopy. The UV–vis–NIR spectra of compounds 1–5 exhibited transitions consistent with uranium in the +4 oxidation state. Clear differences in the absorption band splitting were observed and are likely attributed to differences in metal ion coordination, crystal field effects, and outer sphere interactions Overall, this work demonstrates the utility of noncovalent interactions in tuning the crystallization of various metal complexes from otherwise identical reaction solutions and provides further evidence that counterions impact the composition and structure of actinide complexes isolated in the solid state. In this way, this work affords important insight into directing and controlling the structure of actinide complexes and clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

NIR Dataset and Models (Near-Infrared Spectroscopy Calibration Dataset for Butanediol Fermentation and Multivariate Calibration Models) [SWR-22-60]

2,3-butanediol (2,3-BDO) is an economically important platform chemical that can be used in a variety of chemical feedstocks, liquid fuels, and biosynthetic building blocks. While 2,3-BDO can be efficiently produced by fermentation, the fermentation requires continuous monitoring and control to maximize 2,3-BDO yields and minimize inhibitory coproducts. Because of the time required for sampling and at-line measurement of fermentation samples with high pressure liquid chromatography (HPLC), the ability for operators to perform real-time modification to fermentation conditions is limited. To overcome this challenge, researchers from the National Renewable Energy Laboratory (NREL) have developed a calibration model which can predict the concentration of several analytes in real-time using near-infrared (NIR) spectra of the filtered fermentation broth. While significantly reducing the need for off-line sampling, NREL expects this technology to play a critical role in maximizing 2,3-BDO production. 2,3-butanediol (2,3-BDO) is a useful chemical platform that can be used to create a variety of products. For instance, 2,3-BDO can be (1) dehydrated and converted into methyl ethyl ketone, a liquid fuel additive or (2) deoxydehydrated into 1,3-butadiene for synthetic rubber, which can also be oligomerized in high yields to gasoline, diesel, and jet fuel. In order to maximize 2,3-BDO production, frequent measurement of fermentation samples is needed, as small changes in oxygen concentration can drive the fermentation to undesired products. For example, oxygen-deficient conditions result in glycerol production, while excess oxygen concentrations result in acetoin production. This results in the need for measuring dissolved oxygen, glucose, and xylose concentrations in order to optimize the aeration rate of the fermentation. Traditional monitoring methods occurs off-line and can take up to 30 minutes per sample. With multiple fermenters and high-pressure liquid chromatography (HPLC) injectors, resulting in the need for multiple samples, the sampling process can take hours to complete. NREL’s calibration model can predict the glucose, xylose, 2,3-BDO, acetoin, and glycerol concentrations from NIR spectra of filtered fermentation liquor samples. Using a partial least-squares (PLS) calibration model, NREL’s model can monitor the concentration of these analytes during subsequent fermentations at bench- and pilot-scale, demonstrating the utility of NIR spectroscopy combined with chemometrics for real-time, at-line monitoring of 2,3-BDO fermentations.

Wolfrum, Edward↗
DOE OSTI2020

The importance of sulfonate to the self-doping mechanism of the water-soluble conjugated polyelectrolyte PCPDTBT-SO 3 K

The conjugated polyelectrolyte poly[2,6-(4,4-bis-potassium butanylsulfonate-4H-cyclopenta-[2,1-b;3,4-b']-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBTSO 3 K, or CPE-K) is part of a unique class of organic semiconducting polymers that are soluble in water and become doped in the presence of a proton source. One of these proton sources is water, which CPE-K is exposed to during purification by dialysis, allowing for its immediate use without an additional doping step. Previous studies have suggested that the actual dopant is H + , and that the addition of sodium hydroxide to CPE-K reverses the process and de-dopes the polymer. Curiously, the majority of these water-soluble self-doped polymers in the literature contain a pendant sulfonate group. However, a detailed study to gain insight into the importance of the sulfonate group in water-soluble self-doped polymer systems is lacking, despite its widespread presence in the literature. In this work, using Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and ultraviolet-visible-near infrared (UV-vis-NIR) absorption spectroscopy, we are able to elucidate the role of the pendant sulfonate group with regards to the fundamental doping mechanism of CPE-K. Specifically, we found the CPDT unit can be protonated by water, which is due to both the stabilizing influence of the sulfonate group, and the relatively high oxidation potential of the CPDT unit, both of which are required for self-doped water soluble polymer systems. Furthermore, we estimate the doping efficiency of CPE-K using electrical measurements and X-ray reflectivity (XRR), and reveal several different methods for the doping and de-doping of this material, showcasing this particular material's superior versatility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Temperature and anion ligand field dependence of LnCl 3 (Ln = Nd, Dy, Sm) electronic absorption spectra in LiCl–KCl eutectic molten salt

A comprehensive knowledge of the coordination, bonding, and speciation of elements in molten salt mixtures is necessary to understand and predict the chemical and physical properties of the salt. Absorption spectroscopy can yield information about the chemistry of species of interest in alkali halide molten salt mixtures by revealing information about the electronic structure and transitions of those species. In this study, ultraviolet (UV), visible (vis), and near-infrared (NIR) absorption spectroscopy was used to examine changes to the electronic structure of trivalent Nd, Sm, and Dy in LiCl–KCl eutectic molten salt with changes in temperature and the anion composition of the melt. With increasing temperature, changes to spectral features suggest a distortion of the coordination complexes. Changes to lineshape with the substitution of alternative halide anions were examined and analyzed, revealing differences in the coordination for I – versus F – with the lanthanides. Gaussian peak fitting was used to show that the changes in lineshape with the progressive addition of F – anions can be explained by the superposition of a set of absorption bands from complexes with all Cl – anion ligands and a set of blueshifted absorption bands from complexes containing both F – and Cl – anion ligands. Finally, this work yields a new method to analyze and interpret change to electronic absorption spectra for f-block elements dissolved in alkali halide molten salts as well as new observations of the interactions of larger and smaller halide anions with lanthanides in Cl – -based molten salts.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

In situ characterization of material extrusion printing by near-infrared spectroscopy

Material extrusion printing of reactive resins and inks present a unique challenge due to the time-dependent nature of the rheological and chemical properties they possess. As a result, careful print optimization or process control is important to obtain consistent, high quality prints via additive manufacturing. Here, we present the design and use of a near-infrared (NIR) flow through cell for in situ chemical monitoring of reactive resins during printing. Differences between in situ and off-line benchtop measurements are presented and highlight the need for in-line monitoring capability. Additionally, in-line extrusion force monitoring and off-line post inspection using machine vision is demonstrated. By combining NIR and extrusion force monitoring, it is possible to follow cure reaction kinetics and viscosity changes during printing. When combined with machine vision, the ability to automatically identify and quantify print artifacts can be incorporated on the printing line to enable real-time, artificial intelligence-assisted quality control of both process and product. Together, these techniques form the building blocks of an optimized closed-loop process control strategy when complex reactive inks must be used to produce printed hardware.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Near-infrared spectra and molar absorption coefficients of trivalent lanthanides dissolved in molten LiCl–KCl eutectic

Determining the concentration of the dissolved lanthanide species in LiCl–KCl eutectic salt is important to the development of pyrochemical reprocessing of used nuclear fuel. In this process, lanthanide fission products are found dissolved in the electrorefiner electrolyte in their trivalent oxidation state. The presence of dissolved trivalent lanthanides increases the liquidus temperature of the electrolyte mixture and can lead to the formation of insoluble oxide or oxychloride phases and must therefore be continuously monitored and controlled during the operation. Absorbance spectroscopy is a promising method for continuous measurement of the concentration of lanthanides and other elements dissolved in the electrolyte. The absorption of light by elements is linearly proportional to the concentration of the element for relatively dilute solutions according to the Beer-Lambert law. Although measurement of the absorption of ultraviolet and visible range light by lanthanides in LiCl–KCl eutectic molten salt have been explored previously, near infrared (NIR) absorption spectroscopy has received far less attention. It may, however, provide a better analytical signal when insoluble phases are present due to less Raleigh scattering compared to shorter wavelength radiation. Additionally, it may allow for concentration determination for certain elements using NIR absorption features where UV and visible range features are overlapping with features from other species. In this study, we report the UV–Vis–NIR spectra of the trivalent lanthanide chlorides of neodymium, samarium, and dysprosium in LiCl–KCl eutectic. Molar absorption coefficients are reported for analytically useful absorption maxima, with a focus on the molar absorption coefficients for NIR absorption maxima which have not been reported previously. Additionally, we observe a NIR-range absorption band of Nd3+ which was previously predicted but never experimentally observed. Here, we compare the calculated crystal field levels to the newly observed absorbance band and find them to be in good agreement with previous predictions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Robust and High Throughput Tools for Characterization of Wet Cellulosic Biogas Feedstocks and Co-Products: Cooperative Research and Development Final Report, CRADA Number CRD-21-21472

This project will develop standardized analytical procedures to support understanding of the chemical composition of wet manure feedstocks, and the digestate formed following anaerobic digestion of organic waste to produce renewable natural gas (RNG). The developed methods will be validated to improve component mass closure, eliminate ambiguities around key constituents, and document the precision and accuracy of the methods. Following validation of the analytical laboratory methods for characterization of wet organic waste feedstocks and digestate, NLR will use the same samples to build and validate near-infrared (NIR) models for high throughput analysis, potentially deployable at commercial facilities, enabling increased production of low carbon intensity RNG from wet organic wastes.

09 BIOMASS FUELS↗