Potential constants of nitric acid.
Valence force constants for nitric acid evaluated from fundamental mode vibration spectra by matrix method
Alexander, C., Jr.↗
SEARCH · Search NASA
Results for “NITRIC ACID”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Growth of nitric acid hydrates on thin sulfuric acid films
Type I polar stratospheric clouds (PSCs) are thought to nucleate and grow on stratospheric sulfate aerosols (SSAs). To model this system, thin sulfuric acid films were exposed to water and nitric acid vapors (1-3 x 10(exp -4) Torr H2O and 1-2.5 x 10(exp -6) Torr HNO3) and subjected to cooling and heating cycles. Fourier Transform Infrared (FTIR) spectroscopy was used to probe the phase of the sulfuric acid and to identify the HNO3/H2O films that condensed. Nitric acid trihydrate (NAT) was observed to grow on crystalline sulfuric acid tetrahydrate (SAT) films. NAT also condensed in/on supercooled H2SO4 films without causing crystallization of the sulfuric acid. This growth is consistent with NAT nucleation from ternary solutions as the first step in PSC formation.
Iraci, Laura T.↗
Ignition Delay Experiments with Small-scale Rocket Engine at Simulated Altitude Conditions Using Various Fuels with Nitric Acid Oxidants / Dezso J. Ladanyi
Ignition delay determinations of several fuels with nitric oxidants were made at simulated altitude conditions utilizing a small-scale rocket engine of approximately 50 pounds thrust. Included in the fuels were aniline, hydrazine hydrate, furfuryl alcohol, furfuryl mercaptan, turpentine, and mixtures of triethylamine with mixed xylidines and diallyaniline. Red fuming, white fuming, and anhydrous nitric acids were used with and without additives. A diallylaniline - triethylamine mixture and a red fuming nitric acid analyzing 3.5 percent water and 16 percent NO2 by weight was found to have a wide temperature-pressure ignition range, yielding average delays from 13 milliseconds at 110 degrees F to 55 milliseconds at -95 degrees F regardless of the initial ambient pressure that ranged from sea-level pressure altitude of 94,000 feet.
XYLIDINE↗
NASA and ESA Collaboration on Alternative to Nitric Acid Passivation: Parameter Optimization of Citric Acid Passivation for Stainless Steel Alloys
National Aeronautics and Space Administration (NASA) Headquarters chartered the Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM) to coordinate agency activities affecting pollution prevention issues identified during system and component acquisition and sustainment processes. The primary objectives of NASA TEERM are to: Reduce or eliminate the use of hazardous materials or hazardous processes at manufacturing, remanufacturing, and sustainment locations. Avoid duplication of effort in actions required to reduce or eliminate hazardous materials through joint center cooperation and technology sharing. Corrosion is an extensive problem that affects the National Aeronautics and Space Administration (NASA) and the European Space Agency (ESA). The damaging effects of corrosion result in steep costs, asset downtime affecting mission readiness, and safety risks to personnel. Consequently, it is vital to reduce corrosion costs and risks in a sustainable manner. NASA and ESA have numerous structures and equipment that are fabricated from stainless steel. The standard practice for protection of stainless steel is a process called passivation. Passivation is defined by The American Heritage Dictionary of the English Language as to treat or coat (a metal) in order to reduce the chemical reactivity of its surface. Passivation works by forming a shielding outer (metal oxide) layer that reduces the impact of destructive environmental factors such as air or water. Consequently, this process necessitates a final product that is very clean and free of iron and other contaminants. Typical passivation procedures call for the use of nitric acid; however, there are a number of environmental, worker safety, and operational issues associated with its use. Citric acid is an alternative to nitric acid for the passivation of stainless steels. Citric acid offers a variety of benefits including increased safety for personnel, reduced environmental impact, and reduced operational cost. The primary objective of this effort is to qualify citric acid as an environmentally-preferable alternative to nitric acid for the passivation of stainless steel alloys. While citric acid use has become more prominent in industry, there is little evidence that citric acid is a technically sound passivation agent, especially for the unique and critical applications encountered by NASA and ESA.
citric acid passivation↗
Study on reduction and back extraction of Pu(IV) by urea derivatives in nitric acid conditions
The reduction kinetics of Pu(IV) by hydroxyl-semicarbazide (HSC), hydroxyurea (HU) and di-hydroxyurea (DHU) in nitric acid solutions were investigated separately with adequate kinetic equations. In addition, counter-current cascade experiments were conducted for Pu split from U in nitric acid media using three kinds of reductant, respectively. The results show that urea derivatives as a kind of novel salt-free reductant can reduce Pu(IV) to Pu(III) rapidly in the nitric acid solutions. The stripping experimental results showed that Pu(IV) in the organic phase can be stripped rapidly to the aqueous phase by the urea derivatives, and the separation factors of plutonium /uranium can reach more than 10{sup 4}. This indicates that urea derivatives is a kind of promising salt-free agent for uranium/plutonium separation. In addition, the complexing effect of HSC with Np(IV) was revealed, and Np(IV) can be back-extracted by HSC with a separation factor of about 20.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Corrosion property of 9Cr-ODS steel in nitric acid solution for spent nuclear fuel reprocessing
Corrosion tests of oxide dispersion strengthened with 9% Cr (9Cr-ODS) steel, which is one of the desirable materials for cladding tube of sodium-cooled fast reactors, in pure nitric acid solution, spent FBR fuel solution, and its simulated solution were performed to understand the corrosion behavior in a spent nuclear fuel reprocessing. In this study, the 9Cr-ODS steel with lower effective chromium content was evaluated to understand the corrosion behavior conservatively. As results, the tube-type specimens of the 9Cr-ODS steels suffered severe weight loss owing to active dissolution at the beginning of the immersion test in pure nitric acid solution in the range from 1 to 3.5 M. In contrast, the weight loss was decreased and they showed a stable corrosion in the higher nitric acid concentration, the dissolved FBR fuel solution, and its simulated solution by passivation. The corrosion rates of the 9Cr-ODS steel in the dissolved FBR fuel solution and its simulated solution were 1-2 mm/y and showed good agreement with each other. The passivation was caused by the shift of corrosion potential to noble side owing to increase in nitric acid concentration or oxidative ions in the dissolved FBR fuel solution and the simulated spent fuel solution. (authors)
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
LIMS Instrument Package (LIP) balloon experiment: Nimbus 7 satellite correlative temperature, ozone, water vapor, and nitric acid measurements
The Limb Infrared Monitor of the Stratosphere (LIMS) LIP balloon experiment was used to obtain correlative temperature, ozone, water vapor, and nitric acid data at altitudes between 10 and 36 kilometers. The performance of the LIMS sensor flown on the Nimbus 7 Satellite was assessed. The LIP consists of the modified electrochemical concentration cell ozonesonde, the ultraviolet absorption photometric of ozone, the water vapor infrared radiometer sonde, the chemical absorption filter instrument for nitric acid vapor, and the infrared radiometer for nitric acid vapor. The limb instrument package (LIP), its correlative sensors, and the resulting data obtained from an engineering and four correlative flights are described.
Lee, R. B., III↗
Investigation of effect of fluoride on corrosion of 2S-0 aluminum and 347 stainless steel in fuming nitric acid at 170 F
The effect of small additions of fluoride on the corrosion of 2S-0 aluminum and 347 stainless steel by fuming nitric acid at 170 degrees F has been evaluated quantitatively by the determination of the weight loss of metal specimens immersed in the acid. The ratio of metal surface area to volume of acid was approximately 7.5 inch (superscript)-1 in all cases. It was found that for acids containing no fluorides the weight loss of aluminum was approximately 1/5 that of stainless steel. Addition of 1 percent fluoride ion to the acid reduced the weight loss of both metals to practically zero even after 26 days of exposure to the acid at 170 degrees F. The minimum quantity of fluoride ion required to inhibit corrosion was found to be approximately 0.25 and 0.5 percent for aluminum and stainless steel, respectively, in white fuming nitric acid and 0.5 and 1 percent in red fuming nitric acid (18 percent nitrogen dioxide). These fluoride percentages were based on the total weight of acid. Provided the concentration of fluoride ion was sufficient to inhibit corrosion, the source of these ions was immaterial. Additional information concerning the effect of fluorides on corrosion was obtained by measuring the electrode potentials of the metals against a platinum reference electrode.
Feiler, Charles E↗
Uranyl nitrate hexahydrate solubility in nitric acid and its crystallization selectivity in the presence of nitrate salts
The solubility of uranyl nitrate hexahydrate was determined as a function of nitric acid concentration and temperature, and the crystallization yield was calculated. Results showed an increase in crystal formation at lower initial nitric acid concentrations upon cooling a saturated solution of U(VI) from 50 °C to 2 °C, with over 70% recovery of U(VI) mass at all nitric acid concentrations and nearly quantitative recovery starting at 4 M HNO 3 . A direct correlation between the change in mother liquor volume percent and U mass removal percent was observed. By reducing the cooling rate from roughly 4.0 °C/min to 0.22 °C/min, the separation factor was increased from 3.88 to 15.7 to greater than 81 for the separation of U(VI) from Sr, Cs, and Nd. At the slower cooling rate, the separation factors were measured as a function of acidity for 2.0–4.3 M HNO 3 , showing a decrease in selectivity with a decrease in the acidity. There was also no indication that tetravalent metal double-salt precipitation occurred with either Zr 4+ or Ce 4+ . Here, these results indicate that a high-yield, high purity hexavalent actinide crystallization scheme may offer attractive benefits for nuclear-fuel recycle in that only a single very simple and well-understood technology is employed, and the use of organic compounds and solvents is avoided.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Mechanisms of Plutonium Redox Reactions in Nitric Acid Solutions
Plutonium (Pu) exhibits a complex redox behavior in acidic solutions due to its ability to adapt a wide range of oxidation states typically from +3 to +6 and the tendency for dynamic interconversion between the oxidation states that depends upon electrochemical potential, acid concentration and coordination environments. In particular, the accurate redox speciation of Pu in nitric acid solutions and mapping the interconversion between the various oxidation states mechanistically is challenging due to overlapping chemical and electrochemical reactions leading to significant experimental uncertainties. The last several decades have seen the extensive use of spectroscopic methods to identify and characterize Pu solution species in the various oxidation states. However, dynamic redox mobility of Pu has led to discrepancies among the relevant spectral databases for Pu in nitric acid solutions. This work utilizes a combination of voltammetry and controlled-potential in-situ vis–NIR spectroelectrochemistry to overcome these challenges, and map the interconversion between Pu species in +3, +4, and +6 oxidation states. This allowed elucidation of the mechanisms of the involved redox reactions and an in-depth understanding of the relative stability of the Pu oxidation states through mapping of the Pu redox processes as a function of redox potentials and nitric acid concentrations. The NIR-spectroelectrochemistry studies used to spectroscopically map the redox speciation of Pu as a function of oxidation potentials with varying HNO3 concentrations allows a new perspective into the plutonium redox transformations.
Chatterjee, Sayandev↗
Nitric acid aerosols at the tropical tropopause
It is thermodynamically possible for nitric acid aerosol particles to form in the lower stratosphere and upper troposphere in tropical latitudes. This aerosol would have essentially the same composition as the polar stratospheric clouds observed in the winter polar stratosphere. Calculations have been carried out, indicating that nitric acid aerosols may form at the same altitudes as layers observed in the tropics by the SAGE satellite system.
Hamill, Patrick↗
The photolysis of nitrogen dioxide in the presence of nitric acid at 3660 angstrom units and 25 deg.
Nitric acid decomposition process by irradiation determined by photolysis of nitrogen dioxide
PHOTOLYSIS↗
Energetic particle-induced enhancements of stratospheric nitric acid
Inclusion of complete ion chemistry in the calculation of minor species production during energetic particle deposition events leads to significant enhancement in the calculated nitric acid concentration during precipitation. An ionization rate of 1.2 x 10(exp 3)/cu cm/s imposed for 1 day increases HNO3 from 3 x 10(exp 5) to 6 x 10(exp 7)/cu cm at 50 km. With an ionization rate of 600 cu cm/s, the maximum HNO3 is 3 x 10(exp 7)/cu cm. Calculations which neglect negative ions predict the nitric acid will fall during precipitation events. The decay time for converting HNO3 into odd nitrogen and hydrogen is more than 1 day for equinoctial periods at 70 deg latitude. Examination of nitric acid data should yield important information on the magnitude and frequency of charged particle events.
Aikin, Arthur C.↗
Aircraft measurements of ammonia and nitric acid in the lower troposphere
The first simultaneous measurements of ammonia and nitric acid in the troposphere have been made from an aircraft using a tungsten oxide denuder system. Vertical profiles of NH3 and HNO3 taken over coastal Virginia and Maryland in March and September, 1983, at altitudes from 150 m to 3000 m, show mixing ratios that decrease with altitude. Ammonia profiles show substantial seasonal variation, while nitric acid profiles do not. Using the measured profiles and a one-dimensional photochemical model, lifetimes due to heterogeneous loss of one day for HNO3 and ten days for NH3 are calculated. In contrast, NH3 profiles up to 5300 m over the North Atlantic Ocean during August 1982 show mixing ratios that increase slightly with altitude. These data represent the first ammonia profiles measured over the ocean. It is suggested that the increase in NH3 with altitude is a result of an ammonia-rich continental air mass advected over the ocean, followed by the dissolution of NH3 in the marine boundary layer on water-covered sea salt particles.
Lebel, P. J.↗
Reevaluation of Neptunium–Nitric Acid Radiation Chemistry by Multiscale Modeling
Here, multi-scale modelling has been used to quantitatively reevaluate the radiation chemistry of neptunium in a range of aerated nitric acid solutions (0.1 – 6.0 mol dm -3 ). Exact calculation of initial radiolytic yields accounting for changes in radiation track chemistry was found to be crucial for reproducing experimental data. The gamma irradiation induces changes in the Np(VI):Np(V) oxidation state distribution, predominantly driven by reactions involving HNO 2 , H 2 O 2 , NO 2 • , and NO 3 • from the radiolysis of aqueous nitric acid. Oxidation of Np(V) by NO 3 • ( k = 8.1 × 10 8 dm 3 mol -1 s -1 ) provides the initial increase in Np(VI) concentration, whilst also delaying net reduction of Np(VI) by consuming HNO 2 . Reduction of Np(VI) is dominated by thermal reactions with HNO 2 ( k = 0.7 – 73 dm 3 mol -1 s -1 ) and H 2 O 2 ( k = 1.9 dm 3 mol -1 s -1 ). A steady-state is eventually established once the concentration of Np(V) is sufficiently high enough to be oxidized by NO 2 • k = 2.4 × 10 2 – 3.1 × 10 4 dm 3 mol -1 s -1 ). An additional thermal oxidation reaction between Np(V) and HNO 3 ( k = 2.0 × 10 3 dm 3 mol -1 s -1 ) is required for nitric acid concentrations >4.0 mol dm -3 . For 0.1 mol dm -3 HNO 3 , the rate of Np(VI) reduction is in excess of that which can be accounted for by radiolytic product mass balance, suggesting the existence of a catalytic acid dependent reduction process.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Selective Partitioning of Ruthenium from Nitric Acid Media
Ruthenium removal from PUREX raffinate solutions is imperative for the application of some advanced actinide partitioning technologies, particularly partitioning of hexavalent americium. Ruthenium interferes with the oxidation of americium and suppresses its extraction. Selective extraction of ruthenium from these solutions is complicated by the existence of multiple ruthenium species in nitric acid. In this work, ruthenium is selectively extracted from nitric acid media through oxidation to ruthenium tetroxide and absorption into polymer beads. Extraction of ruthenium tetroxide into a variety of organic solvents is also explored. The use of UV-Visible spectroscopy to quantify extraction of ruthenium tetroxide was demonstrated. This method for extraction of ruthenium from nitric acid was applied to PUREX raffinate simulant solution and was found to simultaneously remove ruthenium (through oxidation and absorption) and zirconium (through precipitation). This method not only removes ruthenium and zirconium from solution but also separates ruthenium and zirconium from each other. Thus, the two most problematic fission product elements for the PUREX process are separated in a single step. Further, americium was not extracted or sorbed, which should allow it to be partitioned following ruthenium/zirconium removal using existing oxidative treatments.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Mechanism of astatine and bismuth sorption on extraction chromatography resins from nitric acid media
Systematic study of astatine (At) sorption on extraction chromatography resins from nitric acid media has been performed at Texas A&M University. This work covers commercially available resins such as LN, TK400, SR, TRU, and UTEVA. Acquiring an understanding of At behavior in up to 4 M HNO 3 solutions is a key step to develop a rapid and reliable system for At separation and purification. The determined distribution coefficients are greater than 20 for all the resins studied, reaching 400 for TRU and UTEVA resins. The sorption uptake decreases in the order: TRU ≳ UTEVA >TK400 ≳ SR >LN. For each resin a thermodynamic model has been developed to suggest a possible mechanism of At sorption and corresponding sorption constants have been estimated. Literature data along with new results on bismuth (Bi) sorption by studied resins in nitric acid media have been reviewed and a mathematical model to describe its behavior has been suggested. A ratio of corresponding fit functions of At and Bi assigned to the same resin and acidity has been used to estimate separation factors of these elements. Furthermore, only the TRU resin is not suitable for efficient At isolation from Bi, while the other four resins demonstrate promising results.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Mechanisms of neptunium redox reactions in nitric acid solutions
First transuranium element neptunium (Np) exhibits complicated behavior in acidic solutions because it can adopt wide range of oxidation states typically from +3 to +6 and coordinate large variety of ligands. In particular, accurate determination of Np redox potentials in nitric acid solutions is challenging due to overlapping chemical and electrochemical reactions leading to significant experimental uncertainties. Furthermore, over past decades spectrophotometry has been extensively applied to identify and characterize Np solution species in different oxidation states. However, relevant spectral database of Np in nitric acid solutions that can serve for the reference purposes has yet to be established due to the experimental difficulty to isolate and stabilize Np species in pure oxidation states without compromising solution optical properties. This work demonstrates that combination of voltammetry and controlled-potential in situ thin-layer spectropotentiometry overcomes these challenges so that Np species in pure +3, +4, +5, or +6 oxidation states were electrochemically generated in the systematically varied 0.1 – 5 M nitric acid solutions, and corresponding vis-NIR spectral signatures were obtained. In situ optical monitoring of the interconversion between adjacent Np oxidation states resulted in elucidation of the mechanisms of the involved redox reactions, in-depth understanding of the relative stability of the Np oxidation states, and allowed benchmarking of the redox potentials of the NpO22+/NpO2+, NpO2+/Np4+ and Np4+/Np3+ couples. Notably, the NpO2+/Np4+ couple was distinguished from the proximal Np4+/Np3+ process overcoming previous concerns and challenges encountered in accurate determination of the respective potentials.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗