Search NASA⌕ Search

SEARCH · Search NASA

Results for “NUSSELT NUMBER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Thermal shaft effects on load-carrying capacity of a fully coupled, variable-properties cryogenic journal bearing

The purpose of this work was to perform a rather complete analysis for a cryogenic (oxygen) journal bearing. The Reynolds equation required coupling and simultaneous solution with the fluid energy equation. To correctly account for the changes in the fluid viscosity, the fluid energy equation was coupled with the shaft and bearing heat conduction energy equations. The effects of pressure and temperature on the density, viscosity, and load-carrying capacity were further discussed as analysis parameters, with respect to relative eccentricity and the angular velocity. The isothermal fluid case and the adiabatic fluid case represented the limiting boundaries. The discussion was further extrapolated to study the Sommerfeld number dependency on the fluid Nusselt number and its consequence on possible total loss of load-carrying capacity and/or seizure (catastrophic failure).

Braun, M. J.↗
NASA NTRS1973

Local heat-transfer characteristics of a row of circular air jets impinging on a concave semicylindrical surface

An experimental study was made of the local heat-transfer characteristics of air jets impinging on the concave side of a right circular semicylinder. A correlation was developed for expressing individual and combined effects of a number of dimensionless variables on the normalized Nusselt number distributions. Results of the present study are in good agreement with those of other investigators.

Livingood, J. N. B.↗
NASA NTRS1982

Time-dependent solutions of multimode convection equations

Truncated modal equations are used to study the time evolution of thermal convection. In the Boussinesq approximation these nonlinear equations are obtained by expanding the fluctuating velocity and temperature fields in a finite set of planforms of the horizontal coordinates. Numerical studies dealing with two or three modes with triad interactions are discussed. Rich time dependence was found in these cases: periodic and aperiodic solutions can be obtained, along with various steady solutions. Three-mode solutions reproduce the qualitative appearance of spoke-pattern convection as observed in experiments at high Prandtl numbers. Though the values of the periods of the time-dependent solutions do not agree with those of the experiments, their variation with Rayleigh number compares favorably. Except at the highest Rayleigh number considered (10,000,000), the theoretical Nusselt numbers agree well with experiment.

Toomre, J.↗
NASA NTRS1983

Viscous thermocapillary convection at high Marangoni number

A liquid, contained in a quarter plane, undergoes steady motion due to thermocapillary forcing on its upper boundary, a free surface separating the liquid from a passive gas. The rigid vertical sidewall has a strip whose temperature is elevated compared with the liquid at infinity. A boudnary-layer analysis is performed that is valid for large Marangoni numbers M and Prandtl numbers P. It is found that the Nusselt number N for the horizontal heat transport satisfies N proportional to min (M to the 1 2/7/power, M to the 1 1/5/power, M to the 1 1/10/power) Generalizations are discussed.

Cowley, S. J.↗
NASA NTRS1973

Heat transfer characteristics of a single circular air jet impinging on a concave hemispherical shell

An experimental study was made of the local and average heat-transfer characteristics of a single turbulent air jet impinging on the concave surface of a hemisphere. Correlations were developed for expressing the effects of a number of dimensionless variables on the local and average Nusselt numbers. Results of the present study are compared with those from a similar study concerning a concave surface of a semicylindrical shell.

Livingood, J. N. B.↗
NASA NTRS2018

Heat Transfer Measurements on the Endwall of a Variable Speed Power Turbine Blade Cascade

Heat transfer measurements were obtained on the endwall of a 2-D section of a variable speed power turbine (VSPT) rotor blade linear cascade. Infrared thermography was used to help determine the transition of flow from laminar to turbulent as well as determine regions of flow separation. Steady state data was obtained for six incidence angles ranging from +15.8 deg to -51 deg, and at five flow conditions for each angle. Nusselt number was used as a method to visualize flow transition and separation on the endwall surface and showed the effects of secondary flows on the surface. Nusselt correlation with Reynolds number from multiple flow conditions was used to plot local values of the correlation exponent and indicated the state of the local boundary layer as the flow transitioned from laminar to turbulent as well as secondary flow features.

variable speed power turbine↗
NASA NTRS1979

Subsolidus convective cooling histories of terrestrial planets

The subsolidus convective cooling histories of terrestrial planets evolving from hot initial states are investigated quantitatively. A simple analytic model simulating average heat flux from a vigorously convecting mantle and incorporating a mantle viscosity proportional to mantle temperature and a lithosphere which thickens as the planet cools is employed. Heat flux from the convecting mantle is calculated on the basis of a power law relation between Nusselt number and Rayleigh number. The temperature distribution in the lithosphere is assumed to be linear throughout the cooling history of the planet. Cooling histories have been determined for the earth, Mars, Mercury and the moon and the mantle temperature decreases, mantle viscosity increases and decreases of heat flux to the surface and to the base of the lithosphere and of Nusselt and Rayleigh numbers are illustrated for each planet. It is found that primordial heat can contribute substantially to the present surface heat flux of a planet.

Schubert, G.↗
NASA NTRS2008

Analysis of Thermal and Reaction Times for Hydrogen Reduction of Lunar Regolith

System analysis of oxygen production by hydrogen reduction of lunar regolith has shown the importance of the relative time scales for regolith heating and chemical reaction to overall performance. These values determine the sizing and power requirements of the system and also impact the number and operational phasing of reaction chambers. In this paper, a Nusselt number correlation analysis is performed to determine the heat transfer rates and regolith heat up times in a fluidized bed reactor heated by a central heating element (e.g., a resistively heated rod, or a solar concentrator heat pipe). A coupled chemical and transport model has also been developed for the chemical reduction of regolith by a continuous flow of hydrogen. The regolith conversion occurs on the surfaces of and within the regolith particles. Several important quantities are identified as a result of the above analyses. Reactor scale parameters include the void fraction (i.e., the fraction of the reactor volume not occupied by the regolith particles) and the residence time of hydrogen in the reactor. Particle scale quantities include the particle Reynolds number, the Archimedes number, and the time needed for hydrogen to diffuse into the pores of the regolith particles. The analysis is used to determine the heat up and reaction times and its application to NASA s oxygen production system modeling tool is noted.

Hegde, U.↗
NASA NTRS2009

Analysis of Thermal and Reaction Times for Hydrogen Reduction of Lunar Regolith

System analysis of oxygen production by hydrogen reduction of lunar regolith has shown the importance of the relative time scales for regolith heating and chemical reaction to overall performance. These values determine the sizing and power requirements of the system and also impact the number and operational phasing of reaction chambers. In this paper, a Nusselt number correlation analysis is performed to determine the heat transfer rates and regolith heat up times in a fluidized bed reactor heated by a central heating element (e.g., a resistively heated rod, or a solar concentrator heat pipe). A coupled chemical and transport model has also been developed for the chemical reduction of regolith by a continuous flow of hydrogen. The regolith conversion occurs on the surfaces of and within the regolith particles. Several important quantities are identified as a result of the above analyses. Reactor scale parameters include the void fraction (i.e., the fraction of the reactor volume not occupied by the regolith particles) and the residence time of hydrogen in the reactor. Particle scale quantities include the particle Reynolds number, the Archimedes number, and the time needed for hydrogen to diffuse into the pores of the regolith particles. The analysis is used to determine the heat up and reaction times and its application to NASA s oxygen production system modeling tool is noted.

Hegde, U.↗
NASA NTRS1985

Surface deformation and geoid anomalies over single and double-layered convective systems

Using a primitive variable formulation of the finite-element method, the differences in the surface observables, such as topography and geoid, produced by single- and double-layered thermal convection, were compared. Both constant and depth-dependent viscosities have been considered. For the same Rayleigh number, larger surface perturbations are produced by single-cell convection. For the same Nusselt number, the magnitudes of the surface observables are greater for double-layered convection. For the same surface heat-flux, surface topographies have similar magnitudes, but the relative amplitudes of geoid anomalies depend greatly on the style of viscosity stratification. This difference in the geoid between the two systems increases with greater surface heat-flow, regardless of viscosity structure.

Koch, M.↗
NASA NTRS1991

A numerical study of the direct contact condensation on a horizontal surface

The results of a numerical study of the direct contact condensation on a slowly moving horizontal liquid surface are presented. The geometrical configuration and the input conditions used to obtain numerical solutions are representative to those of experiments of Celata et al. The effects of Prandtl number (Pr), inflow Reynolds number, and Richardson number on the condensation rate are investigated. Numerical predictions of condensation rate for laminar flow are in good agreement with experimental data. The effect of buoyancy on the condensation rate is characterized by Richardson number. A correlation based on the numerical solutions is developed to predict the average condensation Nusselt number in terms of Richardson number, Peclet number, and inflow Reynolds number.

Hasan, M. M.↗
NASA NTRS1991

A numerical study of the direct contact condensation on a horizontal surface

The results of a numerical study of the direct contact condensation on a slowly moving horizontal liquid surface are presented. The geometrical configuration and the input conditions used to obtain numerical solutions are representative to those of experiments of Celata et al. The effects of Prandtl number (Pr), inflow Reynolds number, and Richardson number on the condensation rate are investigated. Numerical predictions of condensation rate for laminar flow are in good agreement with experimental data. The effect of buoyancy on the condensation rate is characterized by Richardson number. A correlation based on the numerical solutions is developed to predict the average condensation Nusselt number in terms of Richardson number, Peclet number, and inflow Reynolds number.

Hasan, M. M.↗
NASA NTRS1996

Acoustic Streaming and Heat and Mass Transfer Enhancement

A second order effect associated with high intensity sound field, acoustic streaming has been historically investigated to gain a fundamental understanding of its controlling mechanisms and to apply it to practical aspects of heat and mass transfer enhancement. The objectives of this new research project are to utilize a unique experimental technique implementing ultrasonic standing waves in closed cavities to study the details of the generation of the steady-state convective streaming flows and of their interaction with the boundary of ultrasonically levitated near-spherical solid objects. The goals are to further extend the existing theoretical studies of streaming flows and sample interactions to higher streaming Reynolds number values, for larger sample size relative to the wavelength, and for a Prandtl and Nusselt numbers parameter range characteristic of both gaseous and liquid host media. Experimental studies will be conducted in support to the theoretical developments, and the crucial impact of microgravity will be to allow the neglect of natural thermal buoyancy. The direct application to heat and mass transfer in the absence of gravity will be emphasized in order to investigate a space-based experiment, but both existing and novel ground-based scientific and technological relevance will also be pursued.

Trinh, E. H.↗
NASA NTRS1984

Effect of a rotor wake on heat transfer from a circular cylinder

The effect of a rotor wake on heat transfer to a downstream stator was investigated. The rotor was modeled with a spoked wheel of 24 circular pins 1.59 mm in diameter. One of the stator pins was electrically heated in the midspan region and circumferentially averaged heat transfer coefficients were obtained. The experiment was run in an annular flow wind tunnel using air at ambient temperature and pressure. Reynolds numbers based on stator cylinder diameter ranged from .001 to .00001. Rotor blade passing frequencies ranged from zero to 2500 Hz. Stationary grids were used to vary the rotor inlet turbulence from one to four percent. The rotor-stator spacings were one and two stator pin diameters. In addition to the heat transfer coefficients, turbulence spectra and ensemble averaged wake profiles were measured. At the higher Reynolds numbers, which is the primary range of interest for turbulent heat transfer, the rotor wakes increased Nusselt number from 10 to 45 percent depending on conditions. At lower Reynolds numbers the effect was as much as a factor of two.

Simoneau, R. J.↗
NASA NTRS2011

Analytical Approach in DeCoM

There are many papers on describing a LHP as an overall system, but few detail on the condenser section of a loop heat pipe. The DeCoM (Deepak Condenser Model) method utilizes user set initial parameters in-order to simulate a condenser by calculating the interactions between the fluid and the wall. Equations are derived for two sections of the condenser: a two-phase section and a subcooled (liquid) section. All Equations are based upon the conservation of energy theory, from which fluid temperature, and fluid quality values are solved. In order to solve for the heat transfer value, between fluid and the wall in two phase section, the Lockhart-Martinelli correlation method was implemented as a solution approach. For Liquid phase, the Reynolds number was used in-order to differentiate the flow state, from either turbulent or laminar, and Nusselt number was used to solve for the film coefficient. To represent these calculations for both sections a flow chart is presented in order to display the execution process of DeCoM. The benefit of DeCoM is that it is capable of performing preliminary analysis without requiring a license and without much of users knowledge on condensers.

Patel, Deepak↗
NASA NTRS1953

An analysis of laminar free-convection flow and heat transfer about a flat plate paralled to the direction of the generating body force

The free-convection flow and heat transfer (generated by a body force) about a flat plate parallel to the direction of the body force are formally analyzed and the type of flow is found to be dependent on the Grashof number alone. For large Grashof numbers (which are of interest in aeronautics), the flow is of the boundary-layer type and the problem is reduced in a formal manner, which is analogous to Prandtl's forced-flow boundary-layer theory, to the simultaneous solution of two ordinary differential equations subject to the proper boundary conditions. Velocity and temperature distributions for Prandtl numbers of 0.01, 0.72, 0.733, 1, 1, 10, 100, and 1000 are computed, and it is shown that velocities and Nusselt numbers of the order of magnitude of those encountered in forced-convection flows may be obtained in free-convection flows. The theoretical and experimental velocity and temperature distributions are in good agreement. A flow and a heat-transfer parameter, from which the important physical quantities such as shear stress and heat-transfer rate can be computed, are derived as functions of Prandtl number alone.

Ostrach, Simon↗