Search NASA⌕ Search

SEARCH · Search NASA

Results for “Neutron analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Unveiling mesoscopic structures in distorted lamellar phases through deep learning-based small angle neutron scattering analysis

Hypothesis: The formation of distorted lamellar phases, distinguished by their arrangement of crumpled, stacked layers, is frequently accompanied by the disruption of long-range order, leading to the formation of interconnected network structures commonly observed in the sponge phase. Nevertheless, traditional scattering functions grounded in deterministic modeling fall short of fully representing these intricate structural characteristics. Our hypothesis posits that a deep learning method, in conjunction with the generalized leveled wave approach used for describing structural features of distorted lamellar phases, can quantitatively unveil the inherent spatial correlations within these phases. Experiments and Simulations: This report outlines a novel strategy that integrates convolutional neural networks and variational autoencoders, supported by stochastically generated density fluctuations, into a regression analysis framework for extracting structural features of distorted lamellar phases from small angle neutron scattering data. To evaluate the efficacy of our proposed approach, we conducted computational accuracy assessments and applied it to the analysis of experimentally measured small angle neutron scattering spectra of AOT surfactant solutions, a frequently studied lamellar system. Findings: The findings unambiguously demonstrate that deep learning provides a dependable and quantitative approach for investigating the morphology of wide variations of distorted lamellar phases. It is adaptable for deciphering structures from the lamellar to sponge phase including intermediate structures exhibiting fused topological features. In conclusion, this research highlights the effectiveness of deep learning methods in tackling complex issues in the field of soft matter structural analysis and beyond.

36 MATERIALS SCIENCE↗

Probing Thermal Stability of Li-Ion Battery Ni-Rich Layered Oxide Cathodes by means of Operando Gas Analysis and Neutron Diffraction

Thermal stability is a crucial parameter that must be considered within the overall performance metrics of Ni-rich layered oxide cathodes. While the intrinsic structural stability of the cathode materials under thermal conditions is important, it is also critical to consider their reaction with electrolytes. In this study, operando gas analysis, ex situ neutron diffraction, and differential scanning calorimetry were combined to give a broader picture of the thermal stability of Ni-rich NMC cathodes. Li 1– x Ni 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) composite materials with four different states of charge were investigated with and without the presence of an electrolyte. It has been found that electrolyte can greatly accelerate both the structural and thermal decomposition of the cathode materials. A higher state of charge will also make cathode materials more susceptible to thermal shock. Without an electrolyte, O 2 release inducing a structural change from layered to rock salt was the major observation during thermal runaway. However, all samples retained some levels of layered structure after annealing up to 300 °C without the electrolyte. In comparison, almost all the O3-type layered phase transformed to the rock-salt phase for the cathode materials heated with the electrolyte at the same experimental conditions. Moreover, the amount of CO 2 increased by nearly two orders of magnitude when annealing cathode materials with electrolyte in operando gas analysis experiments. More delithiated NMC811 samples released larger amounts of CO 2 at earlier onset temperatures, resonating well with the differential scanning calorimetry (DSC) results showing that more delithiated samples release more heat during thermal shock.

25 ENERGY STORAGE↗

Isotope-Specific Analysis of Neutron-Irradiated Lithium Aluminate Ceramics by Nuclear Magnetic Resonance Spectroscopy

The effects of neutron irradiation on lithium aluminate targets and the permeation of tritium into surrounding components are primary concerns in the development of materials for use in tritium production. The high specific activity and volatility of the tritium in activated samples greatly increase the challenges of experimental analysis. This paper reports the determination of the chemical forms and quantities of H-3 and Li-6 in irradiated and non-irradiated LiAlO2 by nuclear magnetic resonance (NMR) spectroscopy, and demonstrates that measurements can be performed in a non-destructive, safe manner to obtain isotope-selective, quantitative information on highly hazardous materials.

Tritium, solid state nuclear magnetic resonance sp↗

Investigation of residual stress distribution in wire-arc directed energy deposited refractory molybdenum alloy utilizing numerical thermo-mechanical analysis and neutron diffraction method

Directed energy deposition (DED), a metal additive manufacturing (AM) technique, offers higher deposition rates and energy efficiency, making it suitable for fabricating components from refractory molybdenum alloys, such as molybdenum-titanium-zirconium (TZM). However, large thermal gradients and non-equilibrium thermal cycles in DED could generate high residual stress in the component, potentially deteriorating quality and performance. Thus, this study aims to investigate residual stress generation and its distribution in wire-arc DED of TZM thin-wall, utilizing thermo-mechanical analysis and high-fidelity neutron diffraction (ND) method. Two interpass temperatures (50°C and 200°C) have been considered to investigate their impact on residual stress formation. During experiments, in-situ thermal data has been recorded using thermocouples, which have been utilized for calibrating the thermal model. Thermocouple data shows a good agreement with the simulation results, having a difference of less than 10 %. Post-deposition part deformation has been observed, which is measured using a coordinate measuring machine, showing maximum values of 0.93 mm and 0.78 mm for interpass temperatures of 50°C and 200°C, respectively. Numerical predictions of distortion deviated by less than 15% from the experimental results. ND measurement and simulation results indicate that residual stress magnitude and evolution vary across the TZM deposits, revealing microstructural anisotropy in both conditions. Notably, lower interpass temperatures resulted in higher residual stresses, confirmed by experimental and simulation data. Further, this study demonstrated that an integrated experimental and thermo-mechanical analysis can potentially reveal the temperature history, part deformation, and residual stress formation in wire-arc DED TZM alloy.

36 MATERIALS SCIENCE↗

AR reactor neutronics multi-code validation*

The affordable, robust, compact (ARC) reactor is a tokamak fusion reactor concept currently under development by Commonwealth Fusion Systems and Massachusetts Institute of Technology. There are three important neutronics considerations for the operation of the ARC reactor: (1) breeding of enough tritium in the blanket to sustain the D–T reaction in the plasma; (2) ensuring low fluence on the superconducting toroidal field coils; and (3) assessing neutron volumetric heating in structural components. Here, this work aims to perform a validation of the neutronics analysis approach by code-to-code comparison. State-of-the-art software stacks are employed for the neutronics analysis of the ARC reactor, and a computer-aided design (CAD) model is used directly for Monte Carlo (MC) neutron transport calculations. Three software stacks, Attila-MCNP, OpenMC-DAGMC, and Shift-DAGMC, are used to perform neutronic analyses of a 90° sector CAD model of the ARC reactor. In conclusion, results show that the flux tallies calculated by the three software stacks are very close. Also, the volumetric heating and tritium breeding values have less than 0.6% relative difference between codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Data-driven analysis of neutron diffraction line profiles: application to plastically deformed Ta

Abstract Non-destructive evaluation of plastically deformed metals, particularly diffraction line profile analysis (DLPA), is valuable both to estimate dislocation densities and arrangements and to validate microstructure-aware constitutive models. To date, the interpretation of whole line diffraction profiles relies on the use of semi-analytical models such as the extended convolutional multiple whole profile (eCMWP) method. This study introduces and validates two data-driven DLPA models to extract dislocation densities from experimentally gathered whole line diffraction profiles. Using two distinct virtual diffraction models accounting for both strain and instrument induced broadening, a database of virtual diffraction whole line profiles of Ta single crystals is generated using discrete dislocation dynamics. The databases are mined to create Gaussian process regression-based surrogate models, allowing dislocation densities to be extracted from experimental profiles. The method is validated against 11 experimentally gathered whole line diffraction profiles from plastically deformed Ta polycrystals. The newly proposed model predicts dislocation densities consistent with estimates from eCMWP. Advantageously, this data driven LPA model can distinguish broadening originating from the instrument and from the dislocation content even at low dislocation densities. Finally, the data-driven model is used to explore the effect of heterogeneous dislocation densities in microstructures containing grains, which may lead to more accurate data-driven predictions of dislocation density in plastically deformed polycrystals.

36 MATERIALS SCIENCE↗

Neutron-Resonance Transmission Analysis with a Compact Deuterium-Tritium Neutron Generator

Neutron Resonance Transmission Analysis (NRTA) is a spectroscopic technique which uses the resonant absorption of neutrons in the epithermal range to infer the isotopic composition of an object. This spectroscopic technique has relevance in many traditional fields of science and nuclear security. NRTA in the past made use of large, expensive accelerator facilities to achieve precise neutron beams, significantly limiting its applicability. Here, we describe a series of NRTA experiments where we use a compact, low-cost deuterium-tritium (DT) neutron generator to produce short neutron beams (2.6 m) along with a 6 Li-glass neutron detector. The time-of-flight spectral data from five elements – silver, cadmium, tungsten, indium, and 238 U – clearly show the corresponding absorption lines in the 1-30 eV range. The experiments show the applicability of NRTA in this simplified configuration, and prove the feasibility of this compact and low-cost approach. This could significantly broaden the applicability of NRTA, and make it practical and applicable in many fields, such as material science, nuclear engineering, and arms control.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutron Diffraction Analysis of Residual Strain in High-Pressure Die Cast A383 Engine Blocks

The residual strains in three high-pressure die cast A383 engine blocks were measured using neutron diffraction. Residual strains and stresses can be generated during high-pressure die casting process due to high thermal gradients and may cause fatigue failure or dimensional distortion. Neutron diffraction can measure the residual strain distributions deep inside castings with complex geometries, because neutrons can penetrate substantially more material than x-rays. In this paper, the residual strains (in the axial and hoop directions) along the whole cylinder bridge of high-pressure die cast A383 engine blocks in as-cast and heat-treated conditions were measured by neutron diffraction methods. The effect of heat treatment on the distribution and magnitude of residual strains was also investigated. The results indicate that the residual strain in the cylinder bridge is tensile in both the axial and hoop components for both the as-cast and the heat-treated engine blocks. The residual strain in the hoop direction is bigger in magnitude than the residual strain in the axial direction. Heat treatment significantly relaxes the residual strain in the axial direction but only slightly relaxes the residual strain in the hoop direction.

36 MATERIALS SCIENCE↗

The Influence of Structural Dynamics in Two-Dimensional Hybrid Organic–Inorganic Perovskites on Their Photoluminescence Efficiency — Neutron Scattering Analysis

Two-dimensional hybrid organic–inorganic perovskites (HOIPs) have emerged as promising materials for light-emitting diode applications. In this study, by using time-of-flight neutron spectroscopy we identified and quantitatively separated the lattice vibrational and molecular rotational dynamics of two perovskites, butylammonium lead iodide (BA)2PbI4 and phenethyl-ammonium lead iodide (PEA) 2 PbI 4 . By examining the corresponding temperature dependence, we found that the lattice vibrations, as evidenced by neutron spectra, are consistent with the lattice dynamics obtained from Raman scattering. We revealed that the rotational dynamics of organic molecules in these materials tend to suppress their photoluminescence quantum yield (PLQY) while the vibrational dynamics did not show predominant correlations with the same. Additionally, we observed photoluminescence emission peak splitting for both systems, which becomes prominent above certain critical temperatures where the suppression of PLQY begins. This study suggests that the rotational motions of polarized molecules may lead to a reduction in exciton binding energy or the breaking of degeneracy in exciton binding energy levels, enhancing non-radiative recombination rates, and consequently reducing photoluminescence yield. These findings offer a deeper understanding of fundamental interactions in 2D HOIPs and could guide the design of more efficient light-emitting materials for advanced technological applications.

Rajeev, Haritha Sindhu [Univ. of Virginia, Charlot↗

Measurement of D-T Neutron Source Flux by SelfNeutron Activation Analysis with a LaBr3 Detector

Conclusions: • Decay of 78Br produced from the 79Br(n,2n) reaction in LaBr3 is present in the spectrum plotted in the time domain. • The neutron production rate reconstructed from preliminary LaBr3 estimate is smaller than the generator output. • Generator characterization may become more routine if a simple and robust method is made available for applications. Ongoing work: • Implementing bootstrapping to improve error estimates. • Examining threshold and edge effects of LaBr3

SMITH, MURRY↗

Development of a Real-Time Neutron Noise Analysis System for Fuel Debris Removal at Fukushima Daiichi

The decommissioning of Units 1, 2, and 3 at Fukushima Daiichi presents unique challenges, particularly in mitigating the risk of re-criticality during fuel debris removal. Disturbing previously stable debris configurations has the potential to cause changes in the multiplication of the system, necessitating real-time monitoring to ensure operational safety. Current neutron detection systems, primarily passive, are not optimized for continuous real-time analysis and are limited in their ability to detect rapid changes in system reactivity.

Neutron Detection Systems↗

Characterization of D-T Generator Neutron Flux Spectrum for Cyclic Neutron Activation Analysis Experiments

Improving nuclear data for short-lived fission product yields will further our fundamental understanding of fission, which is needed across various scientific fields and applications. One method of attaining the needed product yield data is through cyclic neutron activation, which allows a target to be irradiated in a neutron environment and then transported for counting of the radionuclides produced, typically via g spectroscopy. Recently, such a system has been constructed and commissioned at Pacific Northwest National Laboratory. Targets are shuttled between the head of a D-T neutron generator and a counting station with a transit time of 2 seconds. As part of the characterization of this system, the neutron flux was studied using two activation targets. The neutron flux from the deuterium-tritium fusion generator was determined to be 9.95(33) x10^8 n/cm2-s with a peak energy of 14.9 MeV and a spread of approximately 4 decades between the epithermal and 14 MeV peak group flux.

cyclic neutron activation, gamma-ray spectroscopy,↗

Sensitivity Analysis of Irradiated Fueled Experiments using the MOOSE Framework [Slides]

Modeling and simulation (M&S) methods are able to predict uncertainties in experimental parameters (e.g., power and fission density) during irradiation. A shortfall exists in predicting how sensitive some of the parameters will behave during the experimental process. Sensitivity and Uncertainty Quantification (SUQ) is critical in support of qualification and licensing reactor fuels. The application of a method to quantify the uncertainty in these experiments is critical to the prediction of their performance. In this work, we propose the use of a polynomial chaos expansion (PCE) method to quantify the sensitive parameters in these simulations and, in an extension, their experimental surrogates. We propose to perform M&S using PCE uncertainty quantification on a previously irradiated fueled experiment in order to provide a validation case for Griffin and expand its use as a verification and validation (V&V) tool for experiments with a neutronics component. Griffin is an advanced, deterministic neutronics analysis code built using the MOOSE (multiphysics object-oriented simulation environment) framework which can provide state-of-the-art neutronic analysis on M&S of experiments. We will use the stochastic tools module (STM) in MOOSE to provide PCE uncertainty quantification on the proposed experimental setup. Idaho National Laboratory (INL) does not yet have an in-house developed code with V&V approval for experiments performed on-site; this work would provide a necessary addition of support for experiments performed at INL. The Nuclear Regulatory Commission (NRC) has explicitly requested uncertainties in calculated values such as fuel power and burnup, and the development of this capability would benefit the relationship between INL and the NRC.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

239 Pu R -matrix Analysis and Neutron Multiplicities in the Neutron Energy Region up to a few keVs [Abstract]

The evaluation of 239 Pu neutron resonance parameters coupled to neutron multiplicities $\overline{v}_p$ is of particular importance to investigate the ($\mathcal{n, γf}$) reaction in which a $\mathcal{γ}$-ray emission occurs before the scission of the compound nuclear. This reaction has offered one explanation for the fluctuations in the measured values of $\overline{v}_p$ In this regard, the competition between ($\mathcal{n, γf}$) reaction and the direct fission process can be also included in the R matrix analysis of fission and capture measured data. The goal of this work is the coupled evaluation of the $\mathcal{n}$+ 239 Pu resonance parameters and related neutron multiplicities by ensuring the adoption of thermal neutron constants recently evaluated at the International Atomic Nuclear Energy as well as the recommended (thermal-neutron) induced prompt neutron fission spectrum (PFNS). Moreover, this new set of physical evaluated quantities should also guarantee the agreement for high-leakage solution benchmarks while keeping the good performance of large thermal solution assemblies.

07 ISOTOPE AND RADIATION SOURCES↗

Neutron Noise Analysis of the Neptunium Subcritical Observation (NESO) Experiment

The Neptunium Subcritical Observation (NeSO) experiment was a subcritical integral benchmark experiment. This experiment was designed in 2017-2018 and was performed at the National Criticality Experiments Research Center (NCERC) in 2019. Eight different subcritical configurations were measured with varying Nickel reflector thickness. For all configurations, a 3 He detection system was used to record neutron events. The focus of this work is to share neutron noise results of the measured data.

3-Helium↗

Neutron Noise Analysis of the Neptunium Subcritical Observation (NESO) Experiment

The Neptunium Subcritical Observation (NeSO) experiment was a subcritical integral benchmark experiment. This experiment was designed in 2017-2018 and was performed at the National Criticality Experiments Research Center (NCERC) in 2019. Eight different subcritical configurations were measured with varying Nickel reflector thickness. For all configurations, a 3 He detection system was used to record neutron events. The focus of this work is to share neutron noise results of the measured data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Atmospheric neutrino oscillation analysis with neutron tagging and an expanded fiducial volume in Super-Kamiokande I–V

We present a measurement of neutrino oscillation parameters with the Super-Kamiokande detector using atmospheric neutrinos from the complete pure-water SK I–V (April 1996–July 2020) dataset, including events from an expanded fiducial volume. The dataset corresponds to 6511.3 live days and an exposure of 484.2 kiloton-years. Measurements of the neutrino oscillation parameters Δ⁢𝑚$^2_{3⁢2}$, sin 2 ⁡𝜃 2⁢3 , sin 2⁡ 𝜃 1⁢3 , 𝛿 CP , and the preference for the neutrino mass ordering are presented with atmospheric neutrino data alone, and with constraints on sin 2 ⁡𝜃 1⁢3 from reactor neutrino experiments. Our analysis including constraints on sin 2 ⁡𝜃 1⁢3 favors the normal mass ordering at the 92.3% level.

Cherenkov detectors↗