Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nuclear Reactor Thermal Hydraulics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Deterministic modelling of the SPERT IV reactor transients using the multi-physics capability of WIMS

The ANSWERS WIMS reactor physics code is being developed for whole core multi-physics modelling. The established neutronics capability for lattice calculations has recently been extended to be suitable for whole core modelling of Small Modular Reactors (SMRs). A whole core transport, SP3 or diffusion flux solution is combined with fuel assembly resonance shielding. An integrated thermal hydraulic solver permits temperature and density variations to feedback to the neutronics calculation. This capability can be applied to both steady state and time dependent transient problems. Nuclear reactor design and safety case development requires assessment of a range of reactor transients, to inform both normal operation limitations and accident scenario analysis. This paper presents new methodology developed in WIMS to couple the core neutronics to the integrated core thermal hydraulics solver for the simulation of reactor transients in whole core models. To support the validation of the multi-physics capability of WIMS, this capability has been applied to the reactivity insertion transient experiments performed in the plate fuelled SPERT-IV reactor. This study employs WIMS using the whole core solver MERLIN, which calculates the time-dependent flux distribution and magnitude, coupled to ARTHUR, which solves for the time-dependent thermal hydraulics solution, and provides thermal feedback via the cross sections generated by GEOM, which performs resonance shielding calculations and generates cross section data for the plate geometry. This spatial kinetics model, with dynamic cross section generation, allows for variations in the temperature and neutron flux profile with time.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Tabulated Fluid Properties Research Report

The Multiphysics Object-Oriented Simulation Environment (MOOSE) enables a wide range of advanced nuclear reactor simulations.[6] Under the guidance of MOOSE’s Thermal Hydraulics Team,I worked to expand the capabilities of Tabulated Fluid Properties (TFP) in the fluid properties module. The fluid properties module allows the user to determine a variety of fluid properties by interpolating points between tabulated data. I implemented the ability to use bilinear interpolation instead of bicubic interpolation for interpolating tabulated data. I also changed the method of variable set inversions to use a 2-dimensional Newton’s Method utility that I created. Variable set inversions are often done from (v,e) to (p,T), where v is specific volume, e is specific internal energy, p is pressure and T is temperature. New routines have also been added into TFP such that it can be used with more applications, such as the Navier Stokes and Thermal Hydraulics modules in MOOSE for Pronghorn[5] and RELAP-7[1] respectively. This work was spurred by interest from NASA in testing a Nuclear Thermal Propulsion (NTP) engine system. NTP engines have drastically different fluid properties throughout the engine and Tabulated Fluid Properties provides the flexibility needed to properly simulate and test these engines.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Review of recent activities with MOOSE, an open-source finite element & finite volume multi-fidelity simulation framework

Modeling and simulation are an increasing part of engineering. This is undoubtedly driven by the high costs of constructing experimental facilities, but also enabled by the exponential increase in computing powers over the last decades, which allows computational models to be closer than ever to reality. One of the main drivers for the development of MOOSE is supporting advanced nuclear reactor simulations. A challenging aspect of modeling advanced nuclear reactors is the plurality of physics involved, including neutronics, thermal hydraulics and fuel performance. These physics are all coupled to some extent and are generally solved in a sequential but iterative fashion. The United States (U.S.) national laboratories have been developing MOOSE, an open source multiphysics framework since its inception at the Idaho National Laboratory (INL) in 2008. This framework enables seamless coupling of multiphysics simulations and facilitates the implementation of new physics and material governing laws. It is continuously expanded with novel numerical methods and new pre-implemented physics module. Numerous applications, developed within the Department of Energy (DOE) laboratories, academia, and industry, including outside of nuclear engineering, have been developed to study specialized physics problems. International collaborations are welcome on this open-source modeling and simulation project.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

RELAP5-3D Modeling in the OECD-NEA HTTF Benchmark

Prismatic gas-cooled reactors are a technologically mature reactor concept of interest for near- to mid-term deployment. To accelerate the deployment of these reactors, the DOE's Advanced Reactor Technologies Gas-Cooled Reactor campaign is spearheading a thermal hydraulics code validation benchmark based on the High Temperature Test Facility at Oregon State University. This presentation provides an introduction to that benchmark and an overview of some of the RELAP5-3D validation activities stemming from that benchmark.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Single Primary Heat Extraction and Removal Emulator (SPHERE) Long Duration Testing

For the development of heat-pipe cooled microreactors, it is crucial to thoroughly understand the characteristics and functioning of heat pipes across a wide spectrum of operating conditions. Passive heat removal and its long-term performance stability are critical factors in this context. Enhanced experimental data is vital for evaluating the operational lifespan of alkali metal heat pipes. Idaho National Laboratory (INL) has successfully conducted an extended duration test on a high-performance sodium-filled heat pipe, closely monitoring the axial temperature profile, power supplied by the heaters, and heat removed by a gas-gap calorimeter. The results from this testing provide valuable data that are instrumental in supporting heat pipe validation efforts. Specifically, this data aids in the development and validation of Sockeye, the Multiphysics Object-Oriented Simulation Environment (MOOSE) tool under the US-DOE NEAMS program designed for heat pipe modeling. By comparing experimental results with Sockeye’s predictions, the tool's accuracy and reliability can be assessed and improved, thereby enhancing its capability to simulate heat pipe operations under various conditions.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Current Status of Problem 2 in the HTGR T/H Benchmark

Problem 2 of the HTGR T/H Benchmark is for modeling the depressurized conduction cooldown (DCC) transient. This presentation shares the status of code-to-code and code-to-date comparisons (Exercises 1 and 2) of Problem 2 with results from several participants. A key factor in the discrepancy between results and data in Exercise 2 is the assumed power distribution that is used to model PG-29. This talk highlights both the similarities and differences in solutions and discusses areas where further investigation is merited.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS2008

Development and Testing of Space Fission Technology at NASA-MSFC

The Early Flight Fission Test Facility (EFF-TF) at NASA-Marshall Space Flight Center (MSFC) provides a capability to perform hardware-directed activities to support multiple inspace nuclear reactor concepts by using a non-nuclear test methodology. This includes fabrication and testing at both the module/component level and near prototypic reactor configurations allowing for realistic thermal-hydraulic evaluations of systems. The EFF-TF is currently performing non-nuclear testing of hardware to support a technology development effort related to an affordable fission surface power (AFSP) system that could be deployed on the Lunar surface. The AFSP system is presently based on a pumped liquid metal-cooled reactor design, which builds on US and Russian space reactor technology as well as extensive US and international terrestrial liquid metal reactor experience. An important aspect of the current hardware development effort is the information and insight that can be gained from experiments performed in a relevant environment using realistic materials. This testing can often deliver valuable data and insights with a confidence that is not otherwise available or attainable. While the project is currently focused on potential fission surface power for the lunar surface, many of the present advances, testing capabilities, and lessons learned can be applied to the future development of a low-cost in-space fission power system. The potential development of such systems would be useful in fulfilling the power requirements for certain electric propulsion systems (magnetoplasmadynamic thruster, high-power Hall and ion thrusters). In addition, inspace fission power could be applied towards meeting spacecraft and propulsion needs on missions further from the Sun, where the usefulness of solar power is diminished. The affordable nature of the fission surface power system that NASA may decide to develop in the future might make derived systems generally attractive for powering spacecraft and propulsion systems in space. This presentation will discuss work on space nuclear systems that has been performed at MSFC's EFF-TF over the past 10 years. Emphasis will be place on both ongoing work related to FSP and historical work related to in-space systems potentially useful for powering electric propulsion systems.

Polzin, Kurt↗
DOE OSTI2024

MARVEL microreactor thermalhydraulic design

This paper presents an overview of the MARVEL microreactor thermal hydraulic design. MARVEL is a microreactor testbed being built at Idaho National Laboratory under the sponsorship of U.S. DOE “Microreactor” research program. MARVEL main thermal hydraulic features are recalled, with the modeling strategy and its implications for reactor safety.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
DOE OSTI2025

Initial steady-state core simulation capability or thermal and pool-type molten salt reactors, coupling reactor physics, thermal-hydraulics, and evolving chemistry

This report presents the development and validation of an initial steady-state multiphysics capability for molten salt reactors (MSRs) under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program in Fiscal Year 2025. The framework integrates neutronics, thermal-hydraulics, species transport, and thermochemistry to capture the coupled dynamics of liquid-fueled systems. Implementation and testing were performed on two representative designs: the Molten Salt Reactor Experiment (MSRE), a thermal-spectrum, channeled-flow reactor, and the Lotus Molten Salt Reactor (L-MSR), a fast-spectrum, pool-type reactor. The modeling suite employs Griffin for reactor physics and depletion, Pronghorn and SAM for thermal-hydraulics, Thermochimica for chemistry, and Saline for thermophysical properties, with benchmarking and validation carried out against historical MSRE data, experimental flow-loop measurements, and reference depletion calculations from Monte Carlo codes. The framework demonstrated the ability to reproduce key reactor behaviors including temperature feedback, reactivity losses, delayed neutron precursor transport, xenon poisoning, and redox potential evolution. The results confirm the feasibility and accuracy of the coupled models in predicting steady-state and selected transient MSR behaviors. This latter ones are used in this report as a proxy indicating that the steady-state models from which the transient starts are accurate. For MSRE, validation showed good agreement with pump start-up and natural circulation tests, while for the L-MSR, benchmarking confirmed hydraulic calibration and consistency of neutronics–thermal coupling. The tools also provided new insights into species transport, noble metal deposition, and salt solidification dynamics. On the Xenon transport front, the code is validated against the steady state Xenon poisoining measurement and showed good agreement with the experimental value. Identified areas for future work include advanced void transport modeling, three-dimensional simulations, improved alloy corrosion models, and tighter integration with high-fidelity Monte Carlo codes. These developments provide a foundation for high-fidelity MSR simulations that can support reactor design optimization, safety assessments, and long-term operational strategies.

42 - ENGINEERING↗
NASA NTRSDate not supplied

Comparison of Convective Heat Transfer Correlations and Their Application to NTP Reactors

This study analyzes various Nusselt number and friction factor correlations and applies them to a Small Nuclear Rocket Engine model with a Sinusoidal power distribution profile to understand their effects on the temperatures and pressures inside the reactor. A nodal thermal hydraulic solver was used to determine the fluid and channel surface temperatures while also incorporating variable fluid properties and channel roughness. The results showed that the considered friction factors could essentially be used interchangeably given that their difference affected the pressure by less than 1%. However, large variations in the tube surface temperature were obtained for the different Nusselt numbers while the fluid temperature distribution was forced to remain the same. Supersonic flow conditions presented by Maynard Taylor are investigated to serve as a baseline for how experimental errors can lead to uncertainties in the reported empirical correlations. Detailed experimental investigation is necessary to determine the Nusselt number correlation that will provide the best prediction of the thermal hydraulic performance inside the reactor fluid flow channels.

Nuclear Thermal Propulsion↗
DOE OSTI2024

Analysis of AP1000 Small-Break Loss-of-Coolant Accident Using Reactor Transient Simulator

The Westinghouse Electric Company’s Advanced Passive Reactor (AP1000) is characterized by the incorporation of passive safety systems (PSSs) designed to ensure core cooling during transient events. The assessment of PSSs requires evaluation of their performance through a combination of experiments and simulations employing various thermal-hydraulic codes. In addition, detailed evaluation of PSSs for a specific reactor system transient analysis such as loss-of-coolant-accident analysis supports understanding representative integral effects test facility development and the further evolution model development and assessment process. Developing a reactor system code is a complex and time-consuming process that requires significant engineering expertise and effort. It can take several months to even years to complete in the early stages of reactor system design and analysis. However, this process can be expedited through the use of transient simulator models for similar reactor systems, which can be used for lesson learning and training purposes. This study uses the Personal Computer Transient Analyzer (PCTRAN) code. The main advantage of PCTRAN is its ease of use and ability to run faster than real time. This study presents the results obtained for a small-break loss-of-coolant accident (SBLOCA) for two breaks using the full version (licensed) of PCTRAN. The purpose of this investigation is to evaluate the overall system behavior during the postulated SBLOCA event as well as assess the capability of the PCTRAN code to reproduce the system response during transient events. The obtained results were compared with the Westinghouse NOTRUMP system code. The PCTRAN code proved to be reliable in predicting the qualitative behavior of the system in both transient cases. As for the system response, it was found that it is contingent on the activation time of the PSSs. The differences in reactor coolant system pressure between the two codes were attributed to the critical flow model and simplification of mass and energy balance. Despite PCTRAN’s limitations, it can still provide a reasonable prediction of various reactor parameters such as pressure, mass flow rate, and void fraction during a SBLOCA scenario. It is worth noting that PCTRAN currently employs a bulk approach similar to that of the Modular Accident Analysis Program (MAAP) and MELCOR codes. However, the upcoming version of PCTRAN will include an artificial intelligence–based detection and accident prevention system, as well as different models for different reactor components. Consequently, PCTRAN has the potential to be upgraded to match the system thermal-hydraulic codes of the U.S. Nuclear Regulatory Commission and become more widely used in cybersecurity to safeguard nuclear power plants from cyberattacks.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

High Temperature Gas-Cooled Reactor Thermal Hydraulics Benchmark Problem 2 Description: Depressurized Conduction Cooldown

Problem 2 of the HTGR T/H Benchmark represents the depressurized conduction cooldown transient and is based on HTTF experiment PG-29. The problem includes an exercise for code-to-code comparison, an exercise for code-to-data comparison, and an exercise for error scaling. This presentation provides an overview of the problem description and provides benchmark participants an opportunity to ask questions about the problem definition.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Solid-to-Fluid Radiative Heat Transfer Modeling for System Analysis Module

System Analysis Module (SAM) is a system-level thermal hydraulics code being developed at Argonne National Laboratory for advanced nuclear reactor analysis. In addition to a wide range of interests from the advanced reactor design community, SAM has also been adopted by the United States Nuclear Regulatory Commission's suite of codes purposed for advanced reactor licensing. Nevertheless, the code is still under active development and new capabilities are being added to address various modeling and simulation challenges for advanced reactor analysis. One such phenomenon important to the thermal behavior of some advanced reactor concepts is radiative heat transfer (radHT). Conditions, such as high temperatures and long optical paths, increase the radiative contributions from solids and coolants alike. This paper discusses the development of radHT modeling in SAM and describes the new capabilities provided for thermal analysis. Depending on the geometry and temperatures of the system at hand, as well as the coolant in question, thermal transfer due to thermal radiation will vary dramatically. Therefore, the ability to model variable radiative systems was maintained as a priority during development of SAM radHT modeling. This newly developed simulation feature provides a flexible solid-to-fluid radiative heat transfer framework necessary for SAM to perform accurate analysis for advanced reactor designs. Test cases are also presented and shown to match analytical solutions, which demonstrate the radHT model's efficacy.

Radiative heat transfer↗
DOE OSTI2023

Best-estimate Modeling of the High Temperature Test Facility with RELAP5-3D

Prismatic HTGRs are a concept of interest for near-term deployment. While plenty of validation data exist for standalone neutronics or multiphysics modeling, the availability of integral effects thermal hydraulics validation data is more limited. The High Temperature Test Facility provides such data and is used as the basis for the High-Temperature Gas-Cooled Reactor Thermal Hydraulics Benchmark. This presentation presents results of best-estimate modeling of HTTF experiments PG-27 and PG-29 using the RELAP5-3D ring model developed at Idaho National Laboratory.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Accurate and Efficient Parametric Model-Order Reduction for Turbulent Thermal Transport

This project produced new algorithms and software for low-cost exploration of turbulent thermal-fluids behavior under parametric variation by using reduced-order models (ROMs). The ROMs numerically solve the governing equations for fluid motion by using a small set of basis functions (typically, N=20-200 modes) to represent the solution. The base modes are computed as optimal combinations of solutions from expensive high-fidelity "anchor-point" solutions involving millions of unknowns, which are typically generated by solving the full Navier-Stokes equations on a supercomputer. The ROM solution is itself a combination of the base modes, where the basis coefficients are determined by evolving an NxN system of nonlinear equations. The overarching idea is to use the inexpensive ROM to predict solutions under conditions where the parameters differ from the anchor-point conditions. Several ingredients are required to make ROMs useful for thermal hydraulics analysis. These include: a stable and accurate ROM that is capable of reproducing the large-scale dynamics of turbulent flow, error indicators than can guide the choice of anchor points, and low-cost mechanisms for evaluating nonlinear terms in the reduced equations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS2006

Dynamic Response Testing in an Electrically Heated Reactor Test Facility

Non-nuclear testing can be a valuable tool in development of a space nuclear power or propulsion system. In a non-nuclear test bed, electric heaters are used to simulate the heat from nuclear fuel. Standard testing allows one to fully assess thermal, heat transfer, and stress related attributes of a given system, but fails to demonstrate the dynamic response that would be present in an integrated, fueled reactor system. The integration of thermal hydraulic hardware tests with simulated neutronic response provides a bridge between electrically heated testing and full nuclear testing. By implementing a neutronic response model to simulate the dynamic response that would be expected in a fueled reactor system, one can better understand system integration issues, characterize integrated system response times and response characteristics, and assess potential design improvements at a relatively small fiscal investment. Initial system dynamic response testing was demonstrated on the integrated SAFE-100a heat pipe cooled, electrically heated reactor and heat exchanger hardware, utilizing a one-group solution to the point kinetics equations to simulate the expected neutronic response of the system (Bragg-Sitton, 2005). The current paper applies the same testing methodology to a direct drive gas cooled reactor system, demonstrating the applicability of the testing methodology to any reactor type and demonstrating the variation in system response characteristics in different reactor concepts. In each testing application, core power transients were controlled by a point kinetics model with reactivity feedback based on core average temperature; the neutron generation time and the temperature feedback coefficient are provided as model inputs. Although both system designs utilize a fast spectrum reactor, the method of cooling the reactor differs significantly, leading to a variable system response that can be demonstrated and assessed in a non-nuclear test facility.

Bragg-Sitton, Shannon M.↗
NASA NTRS2007

Application of Simulated Reactivity Feedback in Nonnuclear Testing of a Direct-Drive Gas-Cooled Reactor

Nonnuclear testing can be a valuable tool in the development of an in-space nuclear power or propulsion system. In a nonnuclear test facility, electric heaters are used to simulate heat from nuclear fuel. Standard testing allows one to fully assess thermal, heat transfer, and stress related attributes of a given system but fails to demonstrate the dynamic response that would be present in an integrated, fueled reactor system. The integration of thermal hydraulic hardware tests with simulated neutronic response provides a bridge between electrically heated testing and full nuclear testing. By implementing a neutronic response model to simulate the dynamic response that would be expected in a fueled reactor system, one can better understand system integration issues, characterize integrated system response times and response and response characteristics, and assess potential design improvements with a relatively small fiscal investment. Initial system dynamic response testing was demonstrated on the integrated SAFE 100a heat pipe cooled, electrically heated reactor and heat exchanger hardware. This Technical Memorandum discusses the status of the planned dynamic test methodology for implementation in the direct-drive gas-cooled reactor testing and assesses the additional instrumentation needed to implement high-fidelity dynamic testing.

Bragg-Sitton, S. M.↗