Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nuclear level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

RIPL - Reference Input Parameter Library for Calculation of Nuclear Reactions and Nuclear Data Evaluations

We describe the physics and data included in the Reference Input Parameter Library, which is devoted to input parameters needed in calculations of nuclear reactions and nuclear data evaluations. Advanced modelling codes require substantial numerical input, therefore the International Atomic Energy Agency (IAEA) has worked extensively since 1993 on a library of validated nuclear-model input parameters, referred to as the Reference Input Parameter Library (RIPL). A final RIPL coordinated research project (RIPL-3) was brought to a successful conclusion in December 2008, after 15 years of challenging work carried out through three consecutive IAEA projects. The RIPL-3 library was released in January 2009, and is available on the Web through (http://www-nds.iaea.org/RIPL-3/). This work and the resulting database are extremely important to theoreticians involved in the development and use of nuclear reaction modelling (ALICE, EMPIRE, GNASH, UNF, TALYS) both for theoretical research and nuclear data evaluations. The numerical data and computer codes included in RIPL-3 are arranged in seven segments: MASSES contains ground-state properties of nuclei for about 9000 nuclei, including three theoretical predictions of masses and the evaluated experimental masses of Audi et al. (2003). DISCRETE LEVELS contains 117 datasets (one for each element) with all known level schemes, electromagnetic and {gamma}-ray decay probabilities available from ENSDF in October 2007. NEUTRON RESONANCES contains average resonance parameters prepared on the basis of the evaluations performed by Ignatyuk and Mughabghab. OPTICAL MODEL contains 495 sets of phenomenological optical model parameters defined in a wide energy range. When there are insufficient experimental data, the evaluator has to resort to either global parameterizations or microscopic approaches. Radial density distributions to be used as input for microscopic calculations are stored in the MASSES segment. LEVEL DENSITIES contains phenomenological parameterizations based on the modified Fermi gas and superfluid models and microscopic calculations which are based on a realistic microscopic single-particle level scheme. Partial level densities formulae are also recommended. All tabulated total level densities are consistent with both the recommended average neutron resonance parameters and discrete levels. GAMMA contains parameters that quantify giant resonances, experimental gamma-ray strength functions and methods for calculating gamma emission in statistical model codes. The experimental GDR parameters are represented by Lorentzian fits to the photo-absorption cross sections for 102 nuclides ranging from {sup 51}V to {sup 239}Pu. FISSION includes global prescriptions for fission barriers and nuclear level densities at fission saddle points based on microscopic HFB calculations constrained by experimental fission cross sections.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Independent normalization for γ -ray strength functions: The shape method

Here, the shape method, a novel approach to obtain the functional form of the γ-ray strength function (γSF), is introduced. In connection with the Oslo method the slope of the nuclear level density (NLD) and γSF can be obtained simultaneously even in the absence of neutron resonance spacing data. The foundation of the shape method lies in the primary γ-ray transitions which preserve information on the functional form of the γSF. The shape method has been applied to 56 Fe, 92 Zr, and 164 Dy, which are representative cases for the variety of situations encountered in typical NLD and γSF studies. The comparisons of results from the shape method to those from the Oslo method demonstrate that the functional form of the γSF is retained regardless of nuclear structure details or J π values of the states fed by the primary transitions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear level-density parameters of nuclei in the Z{approx}70 and A{approx}180 mid-shell regions

{alpha}-particle evaporation energy spectra have been measured as a function of {gamma}-ray fold for various target-projectile systems leading to residual nuclei in the range of Z{approx}70 and A{approx}180 with excitation energy of 30-40 MeV. The inverse level-density parameter K was determined for various nuclei by comparing the high-energy part of the {alpha}-particle evaporation spectra with PACE2 predictions. It is observed that the inverse level-density parameter remains constant for all systems studied in this work within statistical errors in the angular momentum range of 15-30 ({Dirac_h}/2{pi}). The fold-gated {alpha}-particle energy spectra in these systems are well reproduced by the PACE2 code with a level-density parameter value of A/(8.2{+-}1.1) MeV{sup -1}.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

La 137 , 138 , 139 ( n , γ ) cross sections constrained with statistical decay properties of La 138 , 139 , 140 nuclei

The nuclear level densities and γ-ray strength functions of 138,139,140 La were measured using the 139 La( 3 He,α), 139 La( 3 He,' 3 He), and 139La(d,p) reactions. The particle-γ coincidences were recorded with the silicon particle telescope (SiRi) and NaI(Tl) (CACTUS) arrays. In the context of these experimental results, the low-energy enhancement in the A~140 region is discussed. The 137,138,139 La(n,γ) cross sections were calculated at s- and p-process temperatures using the experimentally measured nuclear level densities and γ-ray strength functions. As a result, good agreement is found between 139 La(n,γ) calculated cross sections and previous measurements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Level densities and gamma-ray strength functions in Sn isotopes

The nuclear level densities of {sup 118,119}Sn and the gamma-ray strength functions of {sup 116,118,119}Sn below the neutron separation energy are extracted with the Oslo method using the ({sup 3}He,alphagamma) and ({sup 3}He,{sup 3}He{sup '}gamma) reactions. The level-density function of {sup 119}Sn displays steplike structures. The microcanonical entropies are deduced from the level densities, and the single neutron entropy of {sup 119}Sn is determined to be 1.7 +- 0.2 k{sub B}. Results from a combinatorial model support the interpretation that some of the low-energy steps in the level density function are caused by neutron pair breaking. An enhancement in all the gamma-ray strength functions of {sup 116-119}Sn, compared to standard models for radiative strength, is observed for the gamma-ray energy region of approx =4-11 MeV. These small resonances all have a centroid energy of 8.0(1) MeV and an integrated strength corresponding to 1.7(9)% of the classical Thomas-Reiche-Kuhn sum rule. The Sn resonances may be due to electric dipole neutron skin oscillations or to an enhancement of the giant magnetic dipole resonance.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Experimental level densities of atomic nuclei

It is almost 80 years since Hans Bethe described the level density as a non-interacting gas of protons and neutrons. In all these years, experimental data were interpreted within this picture of a fermionic gas. However, the renewed interest of measuring level density using various techniques calls for a revision of this description. In particular, the wealth of nuclear level densities measured with the Oslo method favors the constant-temperature level density over the Fermi-gas picture. Furthermore, trom the basis of experimental data, we demonstrate that nuclei exhibit a constant-temperature level density behavior for all mass regions and at least up to the neutron threshold.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Photon strength and the low-energy enhancement

Several measurements in medium mass nuclei have reported a low-energy enhancement in the photon strength function. Although, much effort has been invested in unraveling the mysteries of this effect, its physical origin is still not conclusively understood. Here, a completely model-independent experimental approach to investigate the existence of this enhancement is presented. The experiment was designed to study statistical feeding from the quasi-continuum (below the neutron separation energy) to individual low-lying discrete levels in {sup 95}Mo produced in the (d, p) reaction. A key aspect to successfully study gamma decay from the region of high-level density is the detection and extraction of correlated particle-gamma-gamma events which was accomplished using an array of Clover HPGe detectors and large area annular silicon detectors. The entrance channel excitation energy into the residual nucleus produced in the reaction was inferred from the detected proton energies in the silicon detectors. Gating on gamma-transitions originating from low-lying discrete levels specifies the state fed by statistical gamma-rays. Any particle-gamma-gamma event in combination with specific energy sum requirements ensures a clean and unambiguous determination of the initial and final state of the observed gamma rays. With these requirements the statistical feeding to individual discrete levels is extracted on an event-by-event basis. The results are presented and compared to {sup 95}Mo photon strength function data measured at the University of Oslo.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Representation of radiative strength functions within a practical model of cascade gamma decay

A practical model developed at the Joint Institute for Nuclear Research (JINR, Dubna) in order to describe the cascade gamma decay of neutron resonances makes it possible to determine simultaneously, from an approximation of the intensities of two-step cascades, parameters of nuclear level densities and partial widths with respect to the emission of nuclear-reaction products. The number of the phenomenological ideas used isminimized in themodel version considered in the present study. An analysis of new results confirms what was obtained earlier for the dependence of dynamics of the interaction of fermion and boson nuclear states on the nuclear shape. From the ratio of the level densities for excitations of the vibrational and quasiparticle types, it also follows that this interaction manifests itself in the region around the neutron binding energy and is probably different in nuclei that have different parities of nucleons.

74 ATOMIC AND MOLECULAR PHYSICS↗

Using DAPPER to extract the photon strength function of 58 Fe using the inverse Oslo and shape methods

The photon strength function of 58 Fe has been extracted using both the Oslo and Shape methods from particle–γ coincidence data measured using the Detector Array for Photons, Protons, and Exotic Residues, which probes nuclei utilizing (d,p) reactions in inverse kinematics. Four particle–γ coincidence matrices, each constructed with different treatments of the γ–ray energies, are explored in order to observe the impact on the resulting nuclear level density and photon strength. The final photon strength function reported is found to agree well with previous Oslo measurements of other iron isotopes. Systematic uncertainties are included, using different model parameters and their reported errors to perform the Oslo method normalization. The model-independent Shape method is explored and the functional form of the photon strength function obtained is in agreement with the Oslo method results. A low-energy enhancement is not reported for 58 Fe in this work given possible subtraction issues originating from strongly populated states.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Level density inputs in nuclear reaction codes and the role of the spin cutoff parameter

Here, the proton spectrum from the 57 Fe(α,p) reaction has been measured and analyzed with the Hauser-Feshbach model of nuclear reactions. Different input level density models have been tested. It was found that the best description is achieved with either Fermi-gas or constant temperature model functions obtained by fitting them to neutron resonance spacing and to discrete levels and using the spin cutoff parameter with much weaker excitation energy dependence than it is predicted by the Fermi-gas model.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Mass-number and excitation-energy dependence of the spin cutoff parameter

Here, the spin cutoff parameter determining the nuclear level density spin distribution ρ(J) is defined through the spin projection as < J 2 z > 1/2 or equivalently for spherical nuclei, (< J(J+1) >/3) 1/2 . It is needed to divide the total level density into levels as a function of J. To obtain the total level density at the neutron binding energy from the s-wave resonance count, the spin cutoff parameter is also needed. The spin cutoff parameter has been calculated as a function of excitation energy and mass with a super-conducting Hamiltonian. Calculations have been compared with two commonly used semiempirical formulas. A need for further measurements is also observed. Some complications for deformed nuclei are discussed. The quality of spin cut off parameter data derived from isomeric ratio measurement is examined.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Experimentally constrained ( p , γ ) Y 89 and ( n , γ ) Y 89 reaction rates relevant to p -process nucleosynthesis

The nuclear level density and the g-ray strength function have been extracted for 89 Y, using the Oslo Method on 89 Y(p,p'γ) 89 Y coincidence data. The g-ray strength function displays a low-energy enhancement consistent with previous observations in this mass region ( 93-98 Mo). Shell-model calculations give support that the observed enhancement is due to strong, low-energy M1 transitions at high excitation energies. The data were further used as input for calculations of the 88 Sr(p,γ) 89 Y and 88 Y(n,γ) 89 Y cross sections with the TALYS reaction code. Lastly, comparison with cross-section data, where available, as well as with values from the BRUSLIB library, shows a satisfying agreement.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Statistical theory of deformation distributions in nuclear spectra

The dependence of the nuclear level density on intrinsic deformation is an important input to dynamical nuclear processes such as fission. The auxiliary-field Monte Carlo (AFMC) method is a powerful method for computing state densities. However, the statistical distribution of intrinsic shapes is not readily accessible due to the formulation of the AFMC method in a spherical configuration-interaction shell-model approach. Instead, the theory of deformation has largely relied on a mean-field approximation which breaks rotational symmetry. We show here how the distributions of the intrinsic quadrupole deformation parameters can be calculated within the AFMC method and present results for a chain of even-mass samarium nuclei ( 148 Sm, 150 Sm, 152 Sm, 154 Sm) which includes spherical, transitional, and strongly deformed isotopes. The method relies on a Landau-like expansion of the Helmholtz free energy in invariant polynomials of the quadrupole tensor. Here we find that an expansion to fourth order provides an excellent description of the AFMC results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of the Se 80 ( γ , n ) reaction with linearly polarized γ rays

This paper reports the results of the first measurements of the differential cross section of the 80 Se(γ , n) 79 Se reaction with a linearly polarized gamma-ray (γ-ray) beam. The cross section was measured at three incident γ-ray beam energies: 15.6, 15.8, and 16.0 MeV, with a beam energy spread of 3.0% full width at half-maximum (FWHM). The differential cross section for the excitation spectrum in 79Se was measured at two scattering angles in the plane of the beam polarization: θ = 90° and 135°, and at one angle in the plane perpendicular to the plane of polarization: θ = 90°. The total photoneutron cross sections determined from these data are between 0.8 and 1.3 standard deviations smaller than previously published results. Here, the excitation spectra measured in this work were fit with a Hauser-Feshbach model. Better fits to the data were obtained with a constant-temperature formulation of the nuclear level density (NLD) than with a Fermi-gas NLD model. The parameters for the constant-temperature NLD model obtained in this work are consistent with those obtained for medium-mass nuclei in previous studies.

59 ≤ A ≤ 89↗

Investigation of the Role of the Role of Nuclear Physics in Heavy Element Nucleosynthesis, through the Study of Key Reactions, and the Improvement of Theoretical Reaction Rates (Final Report)

Neutrino-driven winds in core-collapse supernovae have been identified as a possible site for the production of elements heavier than iron. Traditionally, these neutrino-driven winds have been proposed as the site of the main r-process. Recent simulations fail to reproduce the conditions required for the main r-process. while they remain a promising site for producing the lightest elements beyond iron, e.g., Sr, Y, and Zr through the νp process. The efficiency of the νp process depends on the hydrodynamical conditions, the electron fraction (which is related to the neutrino properties), and the nuclear reactions on many short-lived nuclei with limited (if at all) experimental information. The reaction rates on these nuclei are based on theoretical predictions using the Hauser-Feshbach model. Recent sensitivity studies have highlighted the importance of neutron-induced reactions on these nuclei along the νp process path. This work aimed to experimentally constrain reaction rates that are known to play a key role in the neutrino-p process nucleosynthesis. A secondary subsequently-added objective was to start the implementation of techniques that improve the description of nuclear properties in the Hauser-Feshbach model by extending the microscopic nuclear level density description offered via the shell model to high excitation energies without using experiment-based renormalizations. The main objective of this work was the experimental constraint of the 56 Ni(n,p) 56 Co reaction rate via a measurement of the inverse reaction 56 Co(p,n) 56 Ni at the National Superconducting Cyclotron Laboratory (NSCL) and later the Facility for Rare Isotope Beams (FRIB). This reaction is considered the key one for determining the yields possible by the neutrino-p process. A technique for this type of measurement in inverse kinematics at low energies did not exist before this work. The work also had two secondary objectives. First, to contribute to efforts to measure the same reaction in direct kinematics using a radioactive target at Los Alamos National Laboratory (LANL), and second, to advance work to implement shell-model-deduced microscopic level densities in Hauser-Feshbach calculations. The project has resulted in the development of the first technique to perform (p,n) cross-section measurements in relevant-for-astrophysics low energies in inverse kinematics using a magnetic spectrometer or separator, and neutron detectors for neutron tagging. It has also resulted in the precise measurement of the cross-section of the 40 Ar(p,n) 40 K reaction in a proof-of-principle experiment realized by using a beam-line quadrupole of the ReA3 accelerator of NSCL/FRIB. As part of this project the technique was successfully adapted to make use of the superior acceptance of the Separator for Capture Reactions (SECAR) at FRIB. In this project, the required experimental setup simulations and beam optics were developed and tested with the measurement of the 58 Fe(p,n) 58 Cu reaction cross-section. Additionally, this project contributed with simulation work to the development of a technique to measure (n,p) reactions with radioactive targets at LANL, and which resulted in the measurement of the key 56 Ni(n,p) 56 Co reaction cross-section at neutron energies above ≈1 MeV. Last, the project initiated work in the development of shell model based level densities using the moments method.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Time features of delayed neutrons and partial emissive-fission cross sections for the neutron-induced fission of {sup 232}Th nuclei in the energy range 3.2-17.9 MeV

The energy dependence of the relative abundances of delayed neutrons and the energy dependence of the half-lives of their precursors in the neutron-induced fission of {sup 232}Th nuclei in the energy range 3.2-17.9 MeV were measured for the first time. A systematics of the time features of delayed neutrons is developed. This systematics makes it possible to estimate the half-life of delayed-neutron precursors as a function of the nucleonic composition of fissile nuclei by using a single parameter set for all nuclides. The energy dependence of the partial cross sections for emissive fission in the reaction {sup 232}Th(n, f) was analyzed on the basis of data obtained for the relative abundances of delayed neutrons and the aforementioned half-lives and on the basis of the created systematics of the time features of delayed neutrons. It was shown experimentally for the first time that the decrease in the cross section after the reaction threshold in the fission of {sup 232}Th nuclei (it has a pronounced first-chance plateau) is not an exclusion among the already studied uranium, plutonium, and curium isotopes and complies with theoretical predictions obtained for the respective nuclei with allowance for shell, superfluid, and collective effects in the nuclear-level density and with allowance for preequilibrium neutron emission

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modelling Neutron-induced Reactions on 232–237 U from 10 keV up to 30 MeV

Comprehensive calculations of cross sections for neutron-induced reactions on 232–237 U targets are performed in this paper in the 10 keV–30 MeV incident energy range with the code EMPIRE–3.2 Malta. The advanced modelling and consistent calculation scheme are aimed at improving our knowledge of the neutron scattering and emission cross sections, and to assess the consistency of available evaluated libraries for light uranium isotopes. The reaction model considers a dispersive optical potential (RIPL 2408) that couples from five (even targets) to nine (odd targets) levels of the ground-state rotational band, and a triple-humped fission barrier with absorption in the wells described within the optical model for fission. A modified Lorentzian model (MLO) of the radiative strength function and Enhanced Generalized Superfluid Model nuclear level densities are used in Hauser-Feschbach calculations of the compound-nuclear decay that include width fluctuation corrections. The starting values for the model parameters are retrieved from RIPL. Excellent agreement with available experimental data for neutron emission and fission is achieved, giving confidence that the quantities for which there is no experimental information are also accurately predicted. Finally, deficiencies in existing evaluated libraries are highlighted.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evaluation of the neutron induced reactions on 235 U from 2.25 keV up to 30 MeV

An evaluation of fast neutron induced reactions on 235 U is performed in the 2.25 keV–30 MeV incident energyrangewiththecodeEMPIRE–3.2Malta,combinedwithselectedexperimentaldata.Thereactionmodelincludes a dispersive optical model potential (RIPL 2408) that couples seven levels of the ground-state rotational band and a triple-humped fission barrier with absorption in the wells described within the optical model for fission. EGSM nuclear level densities are used in Hauser-Feshbach calculations of the compound-nuclear decay. The starting values for the modelparameters are retrievedfrom the RIPL-3 data-base. Excellentagreementis achievedwithavailable experimental data for neutron emission, neutron capture and fission, which gives confidence that the quantities for which there is no experimental information are also predicted accurately. In the fast neutron region of the evaluated file, the fission cross section is taken from Neutron Standards, and neutron capture includes fluctuations observed in recent experiments. Other channels are taken directly from model calculations. New evaluation is validated against ICSBEP criticality benchmarks with fast neutron spectra with excellent results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗