Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nuclear waste”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Ablation and deceleration of mass-driver launched projectiles for space disposal of nuclear wastes

The energy cost of launching a projectile containing nuclear waste is two orders of magnitude lower with a mass driver than with a typical rocket system. A mass driver scheme will be feasible, however, only if ablation and deceleration are within certain tolerable limits. It is shown that if a hemisphere-cylinder-shaped projectile protected thermally with a graphite nose is launched vertically to attain a velocity of 17 km/sec at an altitude of 40 km, the mass loss from ablation during atmospheric flight will be less than 0.1 ton, provided the radius of the projectile is under 20 cm and the projectile's mass is of the order of 1 ton. The velocity loss from drag will vary from 0.4 to 30 km/sec, depending on the mass and radius of the projectile, the smaller velocity loss corresponding to large mass and small radius. Ablation is always within a tolerable range for schemes using a mass driver launcher to dispose of nuclear wastes outside the solar system. Deceleration can also be held in the tolerable range if the mass and diameter of the projectile are properly chosen.

Park, C.↗
DOE OSTI2023

Long-term sinking of nuclear waste canisters in salt formations by low-stress creep at high temperature

Abstract Rock salt has a self-sealing capacity, low permeability, and high thermal conductivity, making it a potential host for heat-generating nuclear waste. The feasibility of nuclear waste disposal within salt formations has been investigated mostly for small-sized canisters. Geologic disposal of larger-sized canisters originally designed for spent fuel storage and transportation has lately been examined as a cost-effective alternative. This raises questions about their long-term vertical movement due to their weight and high decay heat. Low-stress creep governs this movement; however, most salt constitutive models do not incorporate it. In this paper, the Norton and the WIPP creep models are compared with the Lux/Wolters/Lerche (LWL) model and a simpler model that combines linear and Norton creep laws (named combined creep model). The LWL and combined creep models consider pressure solution creep, though all incorporate dislocation creep. The models are first applied to creep tests under various stress levels. The LWL and the combined creep models results fit the experimental data well in both high and low stress ranges, whereas the Norton and WIPP models results only fit in higher-stress ranges. The different models are further applied for analyzing long-term canister movement. A sinking rate of $$-4.4\times 10^{-7}$$ - 4.4 × 10 - 7 mm/year was predicted using the Norton and WIPP models versus $$-2.1\times 10^{-2}$$ - 2.1 × 10 - 2 mm/year and $$-3.1\times 10^{-2}$$ - 3.1 × 10 - 2 mm/year using the LWL and the combined creep models, respectively. This comparative study confirms that creep models calibrated exclusively against high-deviatoric stress data might result in an inaccurate estimation of waste packages sinking rate in salt formations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

A novel defoamer for processing nuclear waste: Testing and performance

Abstract Legacy radioactive waste from nuclear weapons material processing is the biggest environmental challenge in the state of South Carolina, and one of the biggest in the United States. Although substantial progress has been made in processing and vitrifying high‐level radioactive waste at the Savannah River site, approximately 35 million gallons remains to be treated and dispositioned. In this article, we show the development of a new defoamer for use in the processing of high‐level radioactive waste. The application of the new defoamer is not only more effective at controlling foam but will shorten the batch processing time leading to safer and more efficient processing. This has the potential to help shorten the overall site mission lifetime, saving the federal government hundreds of millions of dollars. The novel aspect of the new defoamer is its effectiveness and stability in the harsh conditions needed for processing high‐level radioactive waste: high temperatures, pH 4–13, strong oxidizing and reducing agents, and numerous metal catalysts. The defoamer will replace an existing antifoam agent that decomposes to form multiple flammable gases. Because the existing antifoam agent decomposes quickly, processing changes increased processing time. Statement of novelty We demonstrate that a new defoamer has been developed for use in processing high‐level radioactive waste. This novel defoamer is effective and stable in the harsh processing conditions with no detectable flammable by‐products. Because the existing antifoam agent decomposes quickly, processing changes, including lowering acid addition rates and evaporation rates, increased processing time. The new defoamer is not only more effective at controlling foam but will shorten the batch processing time and lead to safer and more efficient processing by eliminating the production of flammable gases. Statement of industrial relevance Foaming is of great concern in many industrial processes involving three‐phase gas/liquid/fine‐solids systems, like in water evaporation, mineral floatation, air sparging in situ remediation techniques, and in those found in the paper industry.

Lambert, Dan P.↗
NASA NTRS1982

Preliminary risk benefit assessment for nuclear waste disposal in space

This paper describes the recent work of the authors on the evaluation of health risk benefits of space disposal of nuclear waste. The paper describes a risk model approach that has been developed to estimate the non-recoverable, cumulative, expected radionuclide release to the earth's biosphere for different options of nuclear waste disposal in space. Risk estimates for the disposal of nuclear waste in a mined geologic repository and the short- and long-term risk estimates for space disposal were developed. The results showed that the preliminary estimates of space disposal risks are low, even with the estimated uncertainty bounds. If calculated release risks for mined geologic repositories remain as low as given by the U.S. DOE, and U.S. EPA requirements continue to be met, then no additional space disposal study effort in the U.S. is warranted at this time. If risks perceived by the public are significant in the acceptance of mined geologic repositories, then consideration of space disposal as a complement to the mined geologic repository is warranted.

Rice, E. E.↗
DOE OSTI2025

Guiding Principles for Geochemical/Thermodynamic Model Development and Validation in Nuclear Waste Disposal: A Close Examination of Recent Thermodynamic Models for H + —Nd 3+ —NO 3 - (—Oxalate) Systems

Development of a defensible source-term model (STM), usually a thermodynamical model for radionuclide solubility calculations, is critical to a performance assessment (PA) of a geologic repository for nuclear waste disposal. Such a model is generally subjected to rigorous regulatory scrutiny. In this article, we highlight key guiding principles for STM model development and validation in nuclear waste management. We illustrate these principles by closely examining three recently developed thermodynamic models with the Pitzer formulism for aqueous H + —Nd 3+ —NO 3 - (—oxalate) systems in a reverse alphabetical order of the authors: the XW model developed by Xiong and Wang, the OWC model developed by Oakes et al., and the GLC model developed by Guignot et al., among which the XW model deals with trace activity coefficients for Nd(III), while the OWC and GLC models are for concentrated Nd(NO 3 ) 3 electrolyte solutions. The principles highlighted include the following: (1) Principle 1. Validation against independent experimental data: A model should be validated against experimental data or field observations that have not been used in the original model parameterization. We tested the XW model against multiple independent experimental data sets including electromotive force (EMF), solubility, water vapor, and water activity measurements. The results show that the XW model is accurate and valid for its intended use for predicting trace activity coefficients and therefore Nd solubility in repository environments. (2) Principle 2. Testing for relevant and sensitive variables: Solution pH is such a variable for an STM and easily acquirable. All three models are checked for their ability to predict pH conditions in Nd(NO 3 ) 3 electrolyte solutions. The OWC model fails to provide a reasonable estimate for solution pH conditions, thus casting serious doubt on its validity for a source-term calculation. In contrast, both the XW and GLC models predict close-to-neutral pH values, in agreement with experimental measurements. (3) Principle 3. Honoring physical constraints: Upon close examination, it is found that the Nd(III)-NO 3 association schema in the OWC model suffers from two shortcomings. Firstly, its second stepwise stability constant for Nd(NO 3 ) 2+ (log K 2 ) is much higher than the first stepwise stability constant for NdNO 3 2+ (log K 1 ), thus violating the general rule of (log K 2 –log K 1 ) < 0, or $\frac{K1}{K2}$>1. Secondly, the OWC model predicts abnormally high activity coefficients for Nd(NO 3 ) 2 + (up to ~900) as the concentration increases. (4) Principle 4. Minimizing degrees of freedom for model fitting: The OWC model with nine fitted parameters is compared with the GLC model with five fitted parameters, as both models apply to the concentrated region for Nd(NO 3 ) 3 electrolyte solutions. The latter appears superior to the former because the latter can fit osmotic coefficient data equally well with fewer model parameters. The work presented here thus illustrates the salient points of geochemical model development, selection, and validation in nuclear waste management.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

The iodine-129 paradox in nuclear waste management strategies

Nuclear energy has an important role in the low-carbon energy transition, but the safety of spent nuclear fuel (SNF) management remains a public concern. Here, in this study, we investigate the interplay between waste management strategies and their environmental impacts with a particular focus on a highly mobile and persistent radionuclide, iodine-129 (I-129), which is the dominant risk contributor from SNF disposal and at existing groundwater contamination sites. The results show that the current recycling practice releases more than 90% of I-129 in SNF into the present-day biosphere using an isotropic dilution strategy, whereas the direct disposal of SNF in geological repositories is likely to delay and reduce the release by 8 orders of magnitude. In addition, our data synthesis of surface water concentrations near four nuclear facilities shows that the release-dilution strategy results in lower concentrations than regulatory standards, while insufficient waste isolation in the past has resulted in locally high concentrations within one site. Our analysis suggests that it is essential to consider effluents more explicitly as a part of the waste, that as society moves from dilution to isolation of waste, the potential risks of waste isolation to local regions should be carefully evaluated, and that excessive burdens of proof could hinder or discourage waste isolation. Comprehensive waste management strategies—considering not just volume but also mobility, isolation technologies and ultimate fates—are needed for persistent contaminants. This study offers valuable insights for optimizing the management of SNF and other persistent contaminants.

Wainwright, Haruko M. [Massachusetts Inst. of Tech↗
DOE OSTI2020

Structures of fluoride containing aluminosilicate low activity nuclear waste glasses: A molecular dynamics simulations study

Fluorine and other halides commonly exist in nuclear waste forms, and due to their volatile nature, halide retention poses an issue affecting waste loading during vitrification. The compositional effect on fluorine incorporation in aluminosilicate glasses is investigated through molecular dynamics simulations. Oxygen and fluorine coordination numbers around glass former and modifier cations, bond angle distributions, and medium range structure features such as Q n distributions, ring size distributions and neutron diffraction structure factors were calculated. It was found that fluorine has higher preference to bond to Ca 2+ than to Na + , both in the melt and the glass, and there is no Si-F bond formation in the glass but they do exist in the melt. Consequently, CaO for Na 2 O substitution can be an effective way to help fluorine retention without significantly changing the glass chemistry. Furthermore, these results thus provide insights on fluorine incorporation in the aluminosilicate nuclear waste glasses and the strategy on how to improve fluorine retention both in the glass and the melt.

36 MATERIALS SCIENCE↗
DOE OSTI2024

AI/ML-assisted Design of Phosphate Glass and Ceramic Nuclear Waste Forms

Borosilicate glass is the widely accepted waste form for immobilization of high and medium level nuclear wastes. Advances in nuclear energies and new reactor designs require the development of new waste forms. For example, wastes from molten salt reactors and reprocessing of nuclear fuels lead to salt-based wastes that are difficult to be immobilized by conventional borosilicate glasses due to limited solubility and waste loading. In designing new waste forms, machine learning (ML) and artificial intelligence (AI) based approaches are much needed and can be beneficial in enabling a more efficient design in large parameter spaces as compared to traditional Edisonian trial-and-error approaches. Here, we report in this paper the rationale and latest progress of our ML/AI-based design of phosphate-based waste forms.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

The Center for Performance and Design of Nuclear Waste Forms and Containers (WastePD) Energy Frontier Research Center (Final Report)

The DOE Office of Environmental Management is responsible for high level nuclear waste that must be safely isolated from humans and the environment for extremely long periods. The waste forms and containers are made of glass, ceramics, and metals. Verified safe disposal requires understanding the fundamental mechanisms of waste form degradation and the design of new waste forms with improved performance, which comprise the goals of the Energy Frontier Research Center known as the Center for the Performance and Design of Nuclear Waste Forms and Containers, WastePD. WastePD was constructed to develop innovative approaches and solutions to those goals through the synergistic interactions of individuals who are experts in the degradation behavior, modeling, and design of glasses, ceramics and metal alloys. WastePD is the first center ever created to address this diverse group of materials in a comprehensive and coordinated manner. The science goals are grouped into three common topics: corrosion mechanisms via advanced characterization, environmental impacts, and materials design. Synergistic interactions in these areas were a key component of WastePD. The fundamental understanding of the degradation mechanisms of the waste forms and containers as well as the development of new materials with improved properties will allow DOE to prevent environmental contamination and to explore totally new repository concepts. WastePD was operational from August 2016 through July 2022, but the DOE support was drastically reduced for the last two years. This final technical report covers the full period of performance. However, much of what was accomplished in the first four years is nicely summarized in a review paper published in 2021, which is appended to this report. Therefore, this final report focuses on the technical findings from the last two years of WastePD activities. Considerable progress was made in the areas of a) the environmental and compositional impacts on the corrosion of borosilicate and aluminosilicate glasses, b) the mechanism of glass corrosion and the structure and evolution of the surface alteration layer, c) the effects of environment and composition on the corrosion of pyrochlore, perovskite, hollandite, and other oxide ceramics, d) the corrosion mechanism of multi-principal element metallic alloys, and e) a new framework for understanding the pitting corrosion of metals.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Novel complex ceramic oxides, Ln 2 TiO 5 (Ln = La, Sm, Gd, Tb, Dy, Ho, Er, and Yb), for polyphase nuclear waste‐forms

Abstract As part of a broader study of ceramic nuclear waste‐forms, four different lanthanide titanates were fabricated; La 0.1 Sm 0.1 Gd 0.1 Tb 0.1 Dy 0.3 Ho 0.1 Er 0.2 YbTiO 5 , Sm 0.3 Gd 0.3 Dy 0.3 Yb 1.1 TiO 5 , Sm 0.1 Gd 0.4 Dy 0.4 Yb 1.1 TiO 5 , and Sm 0.2 Gd 0.2 Dy 0.2 Yb 1.4 TiO 5 . The aim was to produce single‐phase novel materials with cubic symmetry, capable of incorporating a wide variety of cations and with acceptable radiation tolerance. The chemistry flexibility and radiation tolerance are some of the major desirable properties for nuclear waste‐form materials. By using multiple lanthanides the average lanthanide radius can be controlled and consequently the structure, along with properties such as radiation tolerance. The radiation tolerance was assessed using in situ 1 MeV krypton irradiation and transmission electron microscopy characterization. Those materials for which cubic symmetry was achieved displayed better radiation tolerance; a greater critical fluence of ions ( F c ) was required for the crystalline to amorphous transition, and a lower temperature was required to maintain crystallinity ( T c ) during irradiation.

Aughterson, Robert D.↗
DOE OSTI2024

Comparing modelling approaches for a generic nuclear waste repository in salt

This paper contains a comparison of five modelling approaches for a simplified nuclear waste repository in a domal salt formation. It is the result of a four-year collaboration between five international teams on Task F of the DECOVALEX-2023 project on performance assessment modelling. The primary objectives of Task F are to build confidence in the models, methods, and software used for performance assessment (PA) of deep geologic nuclear waste repositories, and/or to bring to the fore additional research and development needed to improve PA methodologies. This work demonstrates how these objectives are accomplished through staged development and comparison of the models and methods used by participating teams in their PA frameworks. Participating teams made a wide range of model assumptions, ranging from compartmentalized networks to full 3D models of the salt formation and repository. Despite differences in the modelling strategies, all models indicate that salt compaction and diffusion of radionuclides in brine are key processes in the repository. For the isothermal spent nuclear fuel and vitrified waste scenario with multiple early failures considered, all models indicate little of the disposed radionuclides will migrate beyond the repository seal over the 100,000-year simulations. In general, the model output quantities have the largest differences over the short term and near the waste. Disparities between the models are believed to be due to differing simplifications from the conceptual model.

DECOVALEX↗
DOE OSTI2020

Large Cemented Gibbsite Agglomerates in Alkaline Nuclear Waste at the Hanford Site and the Impacts to Remediation

Recent work with the remediation of legacy alkaline nuclear waste has focused on nanometer and micrometer particle sizes, emphasizing how these small particles can impact efforts to treat the waste. Building upon this work, we present here findings that show very large particles (several centimeters in size) also exist in these waste which likewise play an important role in the remediation process. While large cemented gibbsite nodules have been periodically reported in acid soils in the literature, this study found similar large gibbsite agglomerates (7 cm in diameter) in alkaline nuclear waste, the first time that such large agglomerates have been identified in an alkaline environment. The morphology of the gibbsite in the agglomerates that were grown over more than 40 years of storage in the waste tank were similar to the much smaller agglomerates that have been reported in previous shorter term studies. Fluid dynamics calculations indicate that these cemented particles would be difficult to mobilize with standard jet slurry technologies, which is consistent with their residence in the waste heel after jet sluicing of the tank.

agglomerates, alkaline nuclear waste↗
DOE OSTI2020

Airborne Release Fractions from Surrogate Nuclear Waste Fires Containing Lanthanide Nitrates and Depleted Uranium Nitrate in 30% Tributyl Phosphate in Kerosene

Airborne contaminants from fires containing nuclear waste represent significant health hazards and shape the design and operation of nuclear facilities. Much of the data used to formulate DOE-HDBK-3010-94, “Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities,” from the U.S. Department of Energy, were taken over 40 years ago. The objectives of this study were to reproduce experiments from Pacific Northwest Laboratories conducted in June 1973 employing current aerosol measurement methods and instrumentation, develop an enhanced understanding of particulate formation and transport from fires containing nuclear waste, and provide modeling and experimental capabilities for updating current standards and practices in nuclear facilities. A special chamber was designed to conduct small fires containing 25 mL of flammable waste containing lutetium nitrate, ytterbium nitrate, or depleted uranium nitrate. Carbon soot aerosols showed aggregates of primary particles ranging from 20 to 60 nm in diameter. In scanning electron microscopy, ~200-nm spheroidal particles were also observed dispersed among the fractal aggregates. The 200-nm spherical particles were composed of metal phosphates. Airborne release fractions (ARFs) were characterized by leaching filter deposits and quantifying metal concentrations with mass spectrometry. The average mass-based ARF for 238 U experiments was 1.0 × 10 -3 with a standard deviation of 7.5 × 10 -4 . For the original experiments, DOE-HDBK-3010-94 states, “Uranium ARFs range from 2 × 10 -4 to 3 × 10 -3 , an uncertainty of approximately an order of magnitude.” Therefore, current measurements were consistent with DOE-HDBK-3010-94 values. ARF values for lutetium and ytterbium were approximately one to two orders of magnitude lower than 238 U. Furthermore, metal nitrate solubility may have varied with elemental composition and temperature, thereby affecting ARF values for uranium surrogates (Yb and Lu). In addition to ARF data, solution boiling temperatures and evaporation rates can also be deduced from experimental data.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Effect of charge and anisotropic diffusivity on ion exchange kinetics in nuclear waste form materials

Motifs of radionuclide absorption particles (absorbers or fillers) for the nuclear waste treatment usually have crystal structures with nano-sized tunnels for fast ion diffusion. On the other hand, the accumulation of ions generates an electric field which affects the ion diffusion. Therefore, the strong anisotropic kinetic properties and the electric field affect ion exchange kinetics, especially in an assembly of these particles which may block the fast diffusion tunnels for each other. In this work, we developed a mesoscale model to describe the effect of anisotropic kinetic properties and electric field on ion exchange kinetics. With the model we simulated the effect of anisotropic diffusivity, electrochemical potential, particle morphology, size and aggregation on ion exchange kinetics during batch experiments. Here, tt is found that 1) ion exchange results in charge accumulation inside the particle because different ions have different diffusivities and different diffusion driving forces. The electric neutrality is not preserved; 2) the electric field speeds up the slower diffusion ions (either uptake or release) and slows down the faster diffusion ions to reduce charge accumulation and maintains charge neutrality; 3) the ion exchange becomes very slow at the later stages because a) diffusion driving force (electrochemical gradient, Cs + concentration in the solution and Na + inside the particle) continuously decreases, as observed in batch experiments; and b) the diffusivity decreases due to the Cs + concentration dependence of ion diffusivity. This can explain the observed experimental phenomena that the radionuclide capacity usually cannot be reached; 4) for needle-like particle and their clusters, both surface area and diffusion distance along the direction with the fastest diffusivities have significant impact on the ion exchange kinetics.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Conversion kinetics during melting of simulated nuclear waste glass feeds measured by dissolution of silica

In this work, we experimentally investigated the batch-to-glass conversion kinetics of two low-activity and two high-level nuclear waste melter feeds that represent widely different behavior during melting; tests comprised thermogravimetric analysis, the feed expansion test, evolved gas analysis, and x-ray diffraction. Our study indicates that the conversion processes, which include gas-evolving reactions, dissolution of crystalline phases, and primary foam expansion and collapse, are interconnected and influenced by the feed’s thermal history. The fraction of dissolved silica was adopted as a measure of the extent of conversion inside the cold cap—the floating layer of feed material on the top surface of the melt in an electric melter. The interface between the cold cap and the free-flowing melt below was associated with a constant fraction of dissolved silica. The estimated viscosity of glass-forming melt at this interface lies within a narrow range for the feeds studied.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Harvesting uranium from nuclear waste streams

Nuclear-fuel-cycle wastewater contains a considerable amount of uranium that must be removed. Here, a new electron-buffering adsorbent provides an economically efficient means of recycling uranium to address remediation and fuel resource needs.

Wiechert, Alexander I. [Oak Ridge National Laborat↗
DOE OSTI2025

A low-temperature, one-step synthesis for monazite can transform monazite into a readily usable advanced nuclear waste form

It has been demonstrated that monazite-type materials are excellent candidates for nuclear waste forms, and hence, their facile synthesis is of great importance for the needed sequestration of existing nuclear waste. The synthesis of monazite, LaPO 4 , requires inconveniently high temperatures near 1000°C and generally involves the conversion of the presynthesized rhabdophane, LaPO 4 •nH 2 O, to the LaPO 4 monazite phase. During this structure transformation, the rhabdophane converts irreversibly to the thermodynamically stable monoclinic monazite structure. A low-temperature (185° to 260°C) mild hydrothermal acid-promoted synthesis of monazite is described that can both transform presynthesized rhabdophane or assemble reagents to the monoclinic monazite structure. The pH dependence of this reaction is detailed, and its applicability to the LnPO 4 (Ln = La, Ce, Pr, Nd, Sm-Gd), Ca 0.5 Th 0.5 PO 4 , and Sr 0.5 Th 0.5 PO 4 systems is discussed. The crystal growth of Ca 0.5 Th 0.5 PO 4 and Sr 0.5 Th 0.5 PO 4 is described, and their crystal structures were reported. In situ x-ray diffraction studies, performed as a function of temperature, provide insight into the structure transformation process.

Biogeochemistry↗
DOE OSTI2024

Glass Design Using Machine Learning Property Models with Prediction Uncertainties: Nuclear Waste Glass Formulation

The United States Department of Energy is responsible for managing the legacy nuclear waste stored in underground tanks at the Hanford Site. The waste will be separately vitrified as low-activity waste and high-level waste fractions. Waste glass formulation algorithms have been traditionally developed using partial quadratic mixture property-composition models. Recently, machine learning (ML) techniques have been used to predict glass properties and discover new glass materials for nuclear waste vitrification, and these advancements can be utilized to improve waste glass composition design. In this proof-of-principle study, ML algorithms such as Gaussian process regression (GPR) were used to interpolate glass properties (e.g., viscosity, electrical conductivity, chemical durability). After selecting appropriate sets of GPR hyper-parameters for each property, an optimization program was developed to formulate glass compositions to maximize waste loading while simultaneously satisfying property within constraints. The results of the ML-based waste loadings and glass compositions were compared to those obtained using the traditional methods. Comparing to the previous glass design framework, the ML-based optimization methods offer improved glass designs and a streamlined approach to generation of optimally designed data and near real-time updates.

glass formulation, machine learning, constraints, ↗