Search NASA⌕ Search

SEARCH · Search NASA

Results for “Numerical diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Finite Element Method for Capturing Ultra-relativistic Shocks

While finite element methods are used extensively by researchers solving computational fluid dynamics in fields other than astrophysics, their use in astrophysical fluid simulations has been predominantly overlooked. Current simulations using other methods such as finite difference and finite volume (based on finite difference) have shown remarkable results, but these methods are limited by their fundamental properties in aspects that are important for simulations with complex geometries and widely varying spatial and temporal scale differences. We have explored the use of finite element methods for astrophysical fluids in order to establish the validity of using such methods in astrophysical environments. We present our numerical technique applied to solving ultra-relativistic (Lorentz Factor Gamma >> 1) shocks which are prevalent in astrophysical studies including relativistic jets and gamma-ray burst studies. We show our finite element formulation applied to simulations where the Lorentz factor ranges up to 2236 and demonstrate its stability in solving ultra-relativistic flows. Our numerical method is based on the Flowfield Dependent Variation (FDV) Method, unique in that numerical diffusion is derived from physical parameters rather than traditional artificial viscosity methods. Numerical instabilities account for most of the difficulties when capturing shocks in this regime. Our method results in stable solutions and accurate results as compared with other methods.

Richardson, G. A.↗
NASA NTRS1990

ULTRA-SHARP nonoscillatory convection schemes for high-speed steady multidimensional flow

For convection-dominated flows, classical second-order methods are notoriously oscillatory and often unstable. For this reason, many computational fluid dynamicists have adopted various forms of (inherently stable) first-order upwinding over the past few decades. Although it is now well known that first-order convection schemes suffer from serious inaccuracies attributable to artificial viscosity or numerical diffusion under high convection conditions, these methods continue to enjoy widespread popularity for numerical heat transfer calculations, apparently due to a perceived lack of viable high accuracy alternatives. But alternatives are available. For example, nonoscillatory methods used in gasdynamics, including currently popular TVD schemes, can be easily adapted to multidimensional incompressible flow and convective transport. This, in itself, would be a major advance for numerical convective heat transfer, for example. But, as is shown, second-order TVD schemes form only a small, overly restrictive, subclass of a much more universal, and extremely simple, nonoscillatory flux-limiting strategy which can be applied to convection schemes of arbitrarily high order accuracy, while requiring only a simple tridiagonal ADI line-solver, as used in the majority of general purpose iterative codes for incompressible flow and numerical heat transfer. The new universal limiter and associated solution procedures form the so-called ULTRA-SHARP alternative for high resolution nonoscillatory multidimensional steady state high speed convective modelling.

Leonard, B. P.↗
NASA NTRS1984

Multigrid techniques for the numerical solution of the diffusion equation

An accurate numerical solution of diffusion problems containing large local gradients can be obtained with a significant reduction in computational time by using a multigrid computational scheme. The spatial domain is covered with sets of uniform square grids of different sizes. The finer grid patterns overlap the coarse grid patterns. The finite-difference expressions for each grid pattern are solved independently by iterative techniques. Two interpolation methods were used to establish the values of the potential function on the fine grid boundaries with information obtained from the coarse grid solution. The accuracy and computational requirements for solving a test problem by a simple multigrid and a multilevel-multigrid method were compared. The multilevel-multigrid method combined with a Taylor series interpolation scheme was found to be best.

Phillips, R. E.↗
NASA NTRS1993

A numerical study of confined turbulent jets

A numerical investigation is reported of turbulent incompressible jets confined in two ducts, one cylindrical and the other conical with a 5 degree divergence. In each case, three Craya-Curtet numbers are considered which correspond, respectively, to flow situations with no moderate and strong recirculation. Turbulence closure is achieved by using the k-epsilon model and a recently proposed realizable Reynolds stress algebraic equation model that relates the Reynolds stresses explicitly to the quadratic terms of the mean velocity gradients and ensures the positiveness of each component of the turbulent kinetic energy. Calculations are carried out with a finite-volume procedure using boundary-fitted curvilinear coordinates. A second-order accurate, bounded convection scheme and sufficiently fine grids are used to prevent the solutions from being contaminated by numerical diffusion. The calculated results are compared extensively with the available experimental data. It is shown that the numerical methods presented are capable of capturing the essential flow features observed in the experiments and that the realizable Reynolds stress algebraic equation model performs much better than the k-epsilon model for this class of flows of great practical importance.

Zhu, J.↗
NASA NTRS1983

The treatment of convected vortices in compressible potential flow

A method is described for incorporating line vortices into the three dimensional compressible potential flow equation. A modified Biot-Savart law is used to compute a vortical velocity field, which is added to the gradient of the potential to form a total velocity. A rapidly converging approximate factorization (AFZ) scheme is then used to compute a potential such that the modified potential flow equation as well as the appropriate boundary conditions, based on total velocity, are satisfied. As part of a coupled iteration procedure, the positions of the line vortices are computed so that they convect with the total flow. The method is used to compute the field due to a single line vortex convecting past a wing. This represents an approximation of the effect of a canard or other lifting surface ahead of the wing, which sheds a tip vortex. It is seen that the flow field is substantially modified by the passage of the vortex. Unlike Euler equation schemes, which are also used to compute these flows, the solutions exhibit no numerical diffusion: The convected vortices retain their initial upstream width. Euler solutions, on the other hand, involve a vorticity which is numerically convected in an Eulerian frame and, unless extensive adaptive grid refinement is used they result in vortices with spread as they convect. Also, the potential flow method requires approximately two orders of magnitude less computing time and much less computer storage than the Euler methods.

Steinhoff, J.↗
DOE OSTI2023

Elastic Flow Modeling for Hydropower Digital Twins

This report details the elastic, unsteady, one-dimensional flow equations that are used to model flow through a penstock in a hydropower facility. The elastic flow model is accurate even in cases of fast transients, long penstock length, and high gravitation head. The compressibility of the water and elasticity of the pipe walls are explicitly accounted for in the developed models so that the water hammer phenomena can be accurately captured. The elastic flow model is coupled to a mechanistic turbine model to resolve the dynamic feedbacks between the elastic water column and the turbine rotation rate. A finite volume method is employed to solve the governing equations, and the method is shown to have low numerical diffusion in sharp gradient phenomena, such as those encountered when simulating water hammer. The method is applied to single dimensional linear advection benchmark problem and numerical results are compared with analytic results. This is followed on by an application to a full hydropower system with a coupled turbine. The elastic flow model results are compared against an inelastic model.

13 HYDRO ENERGY↗
NASA NTRS1989

An improvement of convection fidelity in Euler calculations

A new solution procedure is presented to solve the Euler equations for steady, compressible, rotational, inviscid flows. The approach is aimed at achieving real inviscid solutions in Euler calculations by eliminating numerical diffusion. The variables in the Euler equations are divided into elliptic and convective quantities, using the Clebsch velocity decomposition. The convective quantities are then transported without numerical contamination using an efficient convection operator, while the elliptic quantities are integrated with a relaxation procedure. This approach provides a generalization of the full potential formulation to rotation Euler physics by allowing variations of convective quantities. Results are demonstrated for several transonic flows in two dimensions.

Lee, K. D.↗
DOE OSTI2024

Massively parallel axisymmetric fluid model for streamer discharges

A highly parallelizable fluid plasma simulation tool based upon the first-order drift-diffusion equations is discussed. Atmospheric pressure plasmas have densities and gradients that require small element sizes in order to accurately simulate the plasm resulting in computational meshes on the order of millions to tens of millions of elements for realistic size plasma reactors. To enable simulations of this nature, parallel computing is required and must be optimized for the particular problem. Here, a finite-volume, electrostatic drift-diffusion implementation for low-temperature plasma is discussed. The implementation is built upon the Message Passing Interface (MPI) library in C++ using Object Oriented Programming. The underlying numerical method is outlined in detail and benchmarked against simple streamer formation from other streamer codes. Electron densities, electric field, and propagation speeds are compared with the reference case and show good agreement. Convergence studies are also performed showing a minimal space step of approximately 4 μm required to reduce relative error to below 1% during early streamer simulation times and even finer space steps are required for longer times. Additionally, strong and weak scaling of the implementation are studied and demonstrate the excellent performance behavior of the implementation up to 100 million elements on 1024 processors. Lastly, different advection schemes are compared for the simple streamer problem to analyze the influence of numerical diffusion on the resulting quantities of interest.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Parallel diffusion operator for magnetized plasmas with improved spectral fidelity

Diffusive transport processes in magnetized plasmas are highly anisotropic, with fast parallel transport along the magnetic field lines sometimes faster than perpendicular transport by orders of magnitude. This constitutes a major challenge for describing non-grid-aligned magnetic structures in Eulerian (grid-based) simulations. Here, the present paper describes and validates a new method for parallel diffusion in magnetized plasmas based on the anti-symmetry representation [Halpern and Waltz, Phys. Plasmas 25, 060703 (2018)]. In the anti-symmetry formalism, diffusion manifests as a flow operator involving the logarithmic derivative of the transported quantity. Qualitative plane wave analysis shows that the new operator naturally yields better discrete spectral resolution compared to its conventional counterpart. Numerical simulations comparing the new method against existing finite difference methods are carried out, showing significant improvement. In particular, we find that combining anti-symmetry with finite differences in diagonally staggered grids essentially eliminates the so-called “artificial numerical diffusion” that affects conventional finite difference and finite volume methods.

Anisotropic diffusion↗
NASA NTRS1999

Numerical Speed of Sound and its Application to Schemes for all Speeds

The concept of "numerical speed of sound" is proposed in the construction of numerical flux. It is shown that this variable is responsible for the accurate resolution of' discontinuities, such as contacts and shocks. Moreover, this concept can he readily extended to deal with low speed and multiphase flows. As a results, the numerical dissipation for low speed flows is scaled with the local fluid speed, rather than the sound speed. Hence, the accuracy is enhanced the correct solution recovered, and the convergence rate improved. We also emphasize the role of mass flux and analyze the behavior of this flux. Study of mass flux is important because the numerical diffusivity introduced in it can be identified. In addition, it is the term common to all conservation equations. We show calculated results for a wide variety of flows to validate the effectiveness of using the numerical speed of sound concept in constructing the numerical flux. We especially aim at achieving these two goals: (1) improving accuracy and (2) gaining convergence rates for all speed ranges. We find that while the performance at high speed range is maintained, the flux now has the capability of performing well even with the low: speed flows. Thanks to the new numerical speed of sound, the convergence is even enhanced for the flows outside of the low speed range. To realize the usefulness of the proposed method in engineering problems, we have also performed calculations for complex 3D turbulent flows and the results are in excellent agreement with data.

Liou, Meng-Sing↗
DOE OSTI2022

Verification of Bison fission product species conservation under TRISO reactor conditions

When assessing the reliability and predictive capabilities of a simulation tool, code verification is used to ensure that the implemented numerical algorithm is a faithful representation of its underlying mathematical model, including partial differential or integral equations, initial and boundary conditions, and auxiliary relationships. During this process, numerical results in a discrete solution are compared to the analytical solution of the mathematical model. Here, in this paper, the code verification process is applied to one-dimensional spatiotemporal problems that exercise partial differential equation governing the conservation of fission product species (or mass diffusion). Numerical experiments were performed in the Bison fuel performance code to evaluate its predictive capability under various TRISO reactor conditions such as base irradiation and safety heating test conditions for either short- or long-lived fission product species, as well as a case concerning evaporation from the outer surface of a particle. The code predictions were compared with the expected exact results obtained from the analytical expressions, and the fact that they demonstrate the correct analytical behavior provides strong evidence of proper numerical algorithm implementation.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2026

Lagrange-Remap strategy for multi-material fluid-solid simulations using compressive limiters

In the present work, the Lagrange-Remap strategy proposed in [1] is extended to multi-material fluid-solid simulations. Both hypo-elastic and hyper-elastic material models are considered to describe the mechanical behavior of the solids. In practice, the deviatoric stress tensor (for hypo-elastic materials) and the left Cauchy-Green tensor (for isotropic hyper-elastic materials) are remapped, while the use of compressive limiters effectively reduces numerical diffusion during the remapping step. The simplicity of this diffuse interface approach is emphasized in the context of multi-material fluid-solid simulations. A series of Lagrange-Remap test cases, involving both solids and fluids, are conducted and compared with reference Lagrangian simulations, demonstrating the robustness and accuracy of the overall numerical strategy.

Compressive limiters↗
NASA NTRS1995

A turbulence module for the NPARC code

A turbulence module is developed for the 2D version of the NPARC code which is currently restricted to planar or axisymmetric flows without swirling. Four turbulence models have been built into the module: Baldwin-Lomax, Chien, Shih-Lumley and CMOTT models. The first is a mixing-length eddy-viscosity model which is mainly used for initialization of computational fields and the last three are the low Reynolds number two-equation models. Unlike chien's model, both the Shih-Lumley and CMOTT models do not involve the dimensionless wall distance y(sup +), an advantage for separated flow calculations. Contrary to the NPARC and most other compressible codes, the non-delta form of transport equations is used which leads to a simpler linearization and is more effective than using the delta form in ensuring the positiveness of the turbulent kinetic energy and its dissipation rate. To reduce numerical diffusion while maintaining necessary stability, a second-order accurate and bounded scheme is used for the convective terms of the turbulent transport equations. This scheme is implemented in a deferred correction manner so that the main coefficients of the resulting difference equations are always positive, thus making the numerical solutions process unconditionally stable. The system of equations is solved via a decoupled method and by the alternating direction TDMA of Thomas. The module can be easily linked to the NPARC code for turbulent flow calculations.

Zhu, J.↗
NASA NTRS1985

Flux limiters

It is well known that first order accurate difference schemes for the numerical solution of conservation laws produce results which suffer from excessive numerical diffusion, classical second order schemes, although giving better resolution, suffer from spurious oscillations. Recently much effect has been put into achieving high resolution without these oscillations, using a variety of techniques. Here one class of such methods, that of flux limiting, is outlined together with the TVD constraint used to ensure oscillation free solutions. Brief numerical comparisons of different limiting functions are also presented.

Sweby, P. K.↗
DOE OSTI2022

Comparison of Lagrangian Superdroplet and Eulerian Double-Moment Spectral Microphysics Schemes in Large-Eddy Simulations of an Isolated Cumulus Congestus Cloud

Abstract Advanced microphysics schemes (such as Eulerian bin and Lagrangian superdroplet) are becoming standard tools for cloud physics research and parameterization development. This study compares a double-moment bin scheme and a Lagrangian superdroplet scheme via large-eddy simulations of nonprecipitating and precipitating cumulus congestus clouds. Cloud water mixing ratio in the bin simulations is reduced compared to the Lagrangian simulations in the upper part of the cloud, likely from numerical diffusion, which is absent in the Lagrangian approach. Greater diffusion in the bin simulations is compensated by more secondary droplet activation (activation above cloud base), leading to similar or somewhat higher droplet number concentrations and smaller mean droplet radius than the Lagrangian simulations for the nonprecipitating case. The bin scheme also produces a significantly larger standard deviation of droplet radius than the superdroplet method, likely due to diffusion associated with the vertical advection of bin variables. However, the spectral width in the bin simulations is insensitive to the grid spacing between 50 and 100 m, suggesting other mechanisms may be compensating for diffusion as the grid spacing is modified. For the precipitating case, larger spectral width in the bin simulations initiates rain earlier and enhances rain development in a positive feedback loop. However, with time, rain formation in the superdroplet simulations catches up to the bin simulations. Offline calculations using the same drop size distributions in both schemes show that the different numerical methods for treating collision–coalescence also contribute to differences in rain formation. The stochastic collision–coalescence in the superdroplet method introduces more variability in drop growth for a given rain mixing ratio.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A block-spectral adaptive H-/$p$-refinement strategy for shock-dominated problems

An adaptive H-/p-refinement strategy using a novel sensor is devised and tested in a block-spectral compressible Euler code equipped with adaptive-mesh refinement (AMR) and high-order flux-reconstruction numerics. At each Gauss quadrature point (or solution point) within each spectral block (or mesh element) the discrete velocity jump ΔU = ∂U/∂y 1 Δy 1 + ∂V/∂y 2 Δy 2 + ∂W/∂y 3 Δy 3 is calculated and normalized by the local speed of sound, a. Here, the grid spacing, Δx i , is calculated in each direction as the distance between auxiliary Gauss-Lobatto points, staggered relative to the solution points. The polynomial order is increased from p = 0 to p = p max in regions of weak compression, (ΔU/a) crit < ΔU/a < 0 and kept at p = p max in regions of flow expansion ΔU/a ≥ 0, while staying at the H = 0 base mesh level. Regions experiencing strong compressions, i.e. ΔU/a < (ΔU/a) crit , are H-refined up to H = H max where H max is applied at the location of maximum compression, ΔU/a = min(ΔU/a) in the domain, while keeping p = 0 to guarantee robustness and monotonicity of the solution in the H refined region. The critical value of (ΔU/a) crit = -0.06 is found to effectively separate smooth and non-smooth solution regions, supported by a 1D detonation initiation test case in ideal gas and a shock-to-detonation transition in high explosives. Using this value, the Sod shock tube, Shu-Osher problem, double Mach reflection and a 2D detonation in a high-explosive are simulated with the proposed adaptive H-/p-refinement. In the Sod shock tube case, p-refinement resolves the (weak) contact discontinuity while H-refinement enhances the grid resolution in the shock exploiting the monotonicity of the p = 0 reconstruction. For the Shu-Osher problem, p-refinement captures the small-scale oscillations trailing the shock that would be otherwise attenuated, while H-refinement triggered by the ΔU-sensor appropriately tracks the shock. In the double Mach reflection problem, H-refinement confines the numerical diffusion around the reflected shock while p-refinement recaptures many physical features trailing the shock. Finally, in the 2D high-explosive detonation case, H-refinement follows the leading shock and resolves the curvature of the detonation wave, while p-refinement adds resolution to the trailing reaction zone. Finally, the proposed methodology is tested in a detonation-wave propagation test case in high-explosives with numerical predictions comparing favorably against experiments.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Consistent solutions of the radiation diffusion equation in spherical and cylindrical geometries

We have extended the radiation diffusion model of Hammer and Rosen [Phys. Plasmas 10, 1829 (2003)] to diverging spherical and cylindrical geometries. The effect of curvilinear geometry on the supersonic, expanding wavefront increases as the internal radius of a spherical or cylindrical shell approaches zero. Small spherical geometries are important for modeling systems at the size scale of inertial confinement fusion capsules, at these scales existing quasi-analytic models for planar geometry significantly disagree with the results of simulation. With this method, the benefits of rapid iteration can be applied to common spherical systems at much smaller length scales. We present comparisons between numerical diffusion solutions and the analytic model to give ranges of applicability for the model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗