Search NASA⌕ Search

SEARCH · Search NASA

Results for “OPTICAL PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Optical Properties of Wigglers for EIC Ring Electron Cooler

Electron Ion Collider (EIC) requires cooling of protons at top energy (275 GeV) to achieve the average design luminosity. Such a cooler must be capable of counteracting an IBS-driven emittance growth in proton bunches. The Ring Electron Cooler (REC) is a candidate for the EIC top energy cooler. The REC is a non-magnetized RF-based 150 MeV electron cooler, in which electrons are kept in the storage ring and re-utilized for several million turns. The REC is equipped with 18 damping wigglers, which keep electrons’ emittance constant by counteracting both electrons’ IBS and a proton electron beam-beam scattering happening in the cooling section. These wigglers operate at a relatively low energy but must have a rather high field to provide the required radiation cooling of electrons. As a result of this unique range of parameters, the wigglers’ optics exhibits interesting features The actual design parameters of the wigglers will be finalized in the REC lattice optimization.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Flux-Assisted Boron Chalcogen Mixture (BCM) Method for Synthesizing Mixed Chalcogenide Semiconductors (AkRE 2 Si 2 Se x S 8– x and CaRE 2 Si 2 Se 8 ) ( Ak = Ca and Sr; RE = La, Ce, Pr, Nd, and Sm): Investigation of Their Magnetic and Optical Properties

We report a detailed structural analysis of a series of ten quaternary rare-earth-containing seleno-thiosilicates AkRE 2 Si 2 Se x S 8-x and selenosilicates, CaRE 2 Si 2 Se 8 (Ak = Ca and Sr; RE = La, Ce, Pr, Nd, and Sm). Single crystals were obtained by using the flux-assisted boron chalcogen mixture (BCM) method and single crystal X-ray diffraction was used to determine their structures. All members of the AkRE 2 Si 2 Se x S 8-x and CaRE 2 Si 2 Se 8 series crystallize in the space group R$\bar{3}$c (space group number 167) of the trigonal crystal system. The single-crystal X-ray diffraction analysis revealed a strong preference for Se/S atoms to occupy one vs. the other of the two available sites. Polycrystalline samples were used for magnetic susceptibility and UV–visible diffuse reflectance measurements. Magnetic measurements show that CaCe₂Si₂Se₁.₇₃S₆.₂₇ and CaNd₂Si₂Se₂.₅S₅.₅ are paramagnetic with negative Weiss constants (θ = –60.1 and –26.2). Diffuse reflectance analysis gives optical band gaps of 2.7(1) eV (CaLa₂Si₂Se₂.₃₈S₅.₆₂), 2.2(1) eV (CaCe₂Si₂Se₁.₇₃S₆.₂₇), 2.5(1) eV (CaNd₂Si₂Se₂.₅S₅.₅), and 2.0(1) eV (CaCe₂Si₂Se₈), consistent with density functional theory calculations. By partially or fully replacing S sites with Se it was possible to achieve band gap tuning. Photoluminescence behavior was also investigated for CaCe 2 Si 2 Se 1.73 S 6.27 via irradiation with 375 nm ultraviolet light.

BCM method↗
DOE OSTI2026

Effects of B 2 O 3 on the Growth, Structural, and Magneto-Optical Properties of Yttrium Iron Garnet Single-Crystal Fibers

This study explores the fabrication of yttrium iron garnet (YIG) single crystal fibers using the laser heated pedestal growth (LHPG) method with the experimental addition of B 2 O 3 . The incorporation of B 2 O 3 facilitates the fiber fabrication process by lowering the required growth temperatures and likely modifying melt viscosity behavior, consistent with the established fluxing behavior of B2O3 and the comparative viscosity trend observed in the TMA−VFT analysis, thereby improving process efficiency while maintaining fiber quality. Structural characterization using EBSD and SC-XRD reveals a transition from polycrystalline to single-crystal behavior, with improved alignment along the [111] direction without altering the garnet structure. Magnetic measurements show increases in saturation magnetization in B 2 O 3 -assisted fibers. Three-dimensional anisotropy energy modeling, based on EBSD-derived Euler angles, indicates that the enhanced crystallinity and orientation contribute to reorientation of MCA energy distribution due to improved crystallographic alignment. Faraday rotation measurements show that the B 2 O 3 -assisted sample exhibits a rotation angle closer to reported values for high-quality YIG, suggesting improved phase purity and crystallographic quality. These findings demonstrate that B 2 O 3 -assisted LHPG growth is a scalable and nontoxic approach to producing high-performance YIG fibers for integrated photonic and magnetic field sensing applications.

Crystal structure↗
DOE OSTI2025

A-Cation-Dependent Structure–Optical Property Relationships of Halide Perovskite Heterostructures with Complex Interfaces

Halide perovskite heterostructures offer promising interfacial interactions for energy conversion, yet challenges in synthesizing structurally well-defined systems limit detailed investigations into structure–property relationships. In this article, we report the synthesis of compositionally controlled 3D/3D and 3D/2D halide perovskite heterostructures using evaporation crystallization-polymer pen lithography (EC-PPL) and a single-particle analysis of their properties. By systematically varying A-site cation combinations and crystal dimensions, we show that heterointerfaces induce local lattice distortions that modulate vibrational dynamics and electron-phonon coupling. These interfacial effects result in significantly extended carrier lifetimes compared to compositionally similar pure phases. Raman spectroscopy, temperature-dependent photoluminescence, and power-dependent emission analysis reveal that localized structural modulations at the interface govern exciton-phonon interactions. These effects are magnified in smaller crystals due to increased interfacial contributions. Our findings highlight the critical role of interface-driven lattice control in tuning the optoelectronic properties of halide perovskites and provide design principles for engineering heterostructures in next-generation optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Optical properties of a diamond NV color center from capped embedded multiconfigurational correlated wavefunction theory

Diamond defects are among the most promising qubits. Modeling their properties through accurate quantum mechanical simulations can further their development into robust units of information. We use the recently developed capped density functional embedding theory (capped-DFET) with the multiconfigurational n-electron valence second-order perturbation theory to characterize the electronic excitation energies for different spin manifolds of the well-characterized negatively charged substitutional N defect adjacent to a vacancy (V C ) in diamond (N C V C − ). We successfully reproduce vertical excitation energies for both triplet and singlet states of N C V C − with errors < 0.1 eV. Unlike other embedding methods, capped-DFET exhibits robust predictions that are approximately independent of the embedded cluster size: it only requires a cluster to contain the defect atoms and their nearest neighbors (as small as a 40-atom capped cluster). Furthermore, our method is free from slowly converging Coulomb interactions between charged defects, and thus also only weakly dependent on supercell size.

Chemistry↗
DOE OSTI2024

Strategically designed metal-free deep-ultraviolet birefringent crystals with superior optical properties

Finding new birefringent materials with deep-ultraviolet (DUV, λ < 200 nm) transparency is urgent, as current commercial materials cannot meet the rapidly growing demands in related application fields. Herein, three guanidinium-based compounds, C(NH 2 ) 3 CH 3 SO 3 , β-C(NH 2 ) 3 Cl, and γ-C(NH 2 ) 3 Cl, all featuring [C(NH 2 ) 3 ·X] ∞ (X = CH 3 SO 3 and Cl) pseudo layers, were designed through structural motif tailoring. Theoretical calculations indicate that these metal-free compounds all possess broad bandgaps (6.49–6.71 eV, HSE06) and remarkable birefringence (cal. 0.166–0.211 @ 1064 nm). Centimeter-sized C(NH 2 ) 3 CH 3 SO 3 crystals have been grown using a feasible aqua-solution method. Subsequently, to further optimize the properties, β/γ-C(NH 2 ) 3 Cl was remolded by further tailoring the [C(NH 2 ) 3 ] + cationic unit and the acceptor Cl - anion, and then the fourth compound NH 2 COF was theoretically constructed. Interestingly, NH 2 COF exhibits the desired coexistence of a wider bandgap (7.87 eV, HSE06) and giant birefringence (cal. 0.241 @ 1064 nm) attributed to its higher density of well-aligned birefringence-active groups (BAGs). Furthermore, among these four designed compounds, C(NH 2 ) 3 CH 3 SO 3 has been experimentally synthesized and exhibits a short UV cutoff edge. Centimeter-sized crystals have been grown using a feasible aqueous solution method. This study provides an effective strategy to optimize the density of BAGs for large birefringence and offers valuable insights into the strategic design of metal-free DUV birefringent crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Structural, Electrical, and Optical Properties of Single-Walled Carbon Nanotubes Synthesized through Floating Catalyst Chemical Vapor Deposition

Single-walled carbon nanotube (SWCNT) thin films were synthesized by using a floating catalyst chemical vapor deposition (FCCVD) method with a low flow rate (200 sccm) of mixed gases (Ar and H 2 ). SWCNT thin films with different thicknesses can be prepared by controlling the collection time of the SWCNTs on membrane filters. Transmission electron microscopy (TEM) showed that the SWCNTs formed bundles and that they had an average diameter of 1.46 nm. The Raman spectra of the SWCNT films suggested that the synthesized SWCNTs were very well crystallized. Although the electrical properties of SWCNTs have been widely studied so far, the Hall effect of SWCNTs has not been fully studied to explore the electrical characteristics of SWCNT thin films. In this research, Hall effect measurements have been performed to investigate the important electrical characteristics of SWCNTs, such as their carrier mobility, carrier density, Hall coefficient, conductivity, and sheet resistance. The samples with transmittance between 95 and 43% showed a high carrier density of 10 21– 10 23 cm –3 . The SWCNTs were also treated using Brønsted acids (HCl, HNO 3 , H 2 SO 4 ) to enhance their electrical properties. After the acid treatments, the samples maintained their p-type nature. The carrier mobility and conductivity increased, and the sheet resistance decreased for all treated samples. The highest mobility of 1.5 cm 2 /Vs was obtained with the sulfuric acid treatment at 80 °C, while the highest conductivity (30,720 S/m) and lowest sheet resistance (43 ohm/square) were achieved with the nitric acid treatment at room temperature. Different functional groups were identified in our synthesized SWCNTs before and after the acid treatments using Fourier-Transform Infrared Spectroscopy (FTIR).

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tailoring optical response of MXene thin films

Due to their attractive optical properties, 2D MXenes have garnered interest in nanophotonic and optoelectronic applications. However, tuning their properties typically requires the iterative synthesis of MXenes with a specific set of properties, such as the absorption band position, electronic conductivity, and dielectric constant. We demonstrate how to tailor the optical properties of MXene thin films over a broad 1500-nm wavelength range by mixing different ratios of highly conductive Ti 3 C 2 T x with poorly conductive Nb 2 CT x . By changing the MXene film composition, the epsilon-near-zero (ENZ) point, where the optical properties transit from dielectric to metallic, was varied in the spectral range from 1.1 to 2.6 µm. Additionally, we observed a reduction in absorption in some compositions compared to the absorption of the pure MXene films. Compared to other methods, this approach enables simple and continual tuning of MXene optical properties without requiring multiple time-consuming synthesis steps.

2D materials↗
DOE OSTI2025

Spatio-spectral optical fission in time-varying subwavelength layers

Transparent conducting oxides are highly doped semiconductors that exhibit favourable optical features compared with metals, including reduced material losses, tuneable electronic and optical properties, and enhanced damage thresholds. Recently, the photonic community has renewed its attention towards these materials, recognizing their remarkable nonlinear optical properties in the near-infrared spectrum. The exceptionally large and ultrafast change in the refractive index, which can be optically induced in these compounds, extends beyond the boundaries of conventional perturbative analysis and makes this class of materials the closest approximation to a time-varying system. Here we report the spatio-spectral fission of an ultrafast pulse trespassing a thin film of aluminium zinc oxide with a non-stationary refractive index. By applying phase conservation to this time-varying layer, our model can account for both space and time refraction and explain, in quantitative terms, the spatial separation of both spectrum and energy. Our findings represent an example of extreme nonlinear phenomena on subwavelength propagation distances, which provides new insights into transparent conducting oxides’ transient optical properties. This can be critical for the ongoing research on photonic time crystals, on-chip generation of non-classical states of light, integrated optical neural networks, ultrafast beam steering and frequency-division multiplexing.

integrated optics↗
DOE OSTI2025

NeuralMie (v1.0): an aerosol optics emulator

The direct interactions of atmospheric aerosols with radiation significantly impact the Earth's climate and weather and are important to represent accurately in simulations of the atmosphere. This work introduces two contributions to enable a more accurate representation of aerosol optics in atmosphere models: (1) NeuralMie, a neural network Mie scattering emulator that can directly compute the bulk optical properties of a diverse range of aerosol populations and is appropriate for use in atmosphere simulations where aerosol optical properties are parameterized, and (2) TAMie, a fast Python-based Mie scattering code based on the Toon and Ackerman (1981) Mie scattering algorithm that can represent both homogeneous and coated particles. TAMie achieves speed and accuracy comparable to established Fortran Mie codes and is used to produce training data for NeuralMie. NeuralMie is highly flexible and can be used for a wide range of particle types, wavelengths, and mixing assumptions. It can represent core-shell scattering and, by directly estimating bulk optical properties, is more efficient than existing Mie code and Mie code emulators while incurring negligible error compared to existing aerosol optics parameterization schemes (0.08 % mean absolute percentage error).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Highly Anisotropic Quasi‐Direct Organic Metal Halide Hybrids: A Platform for Polarization‐Sensitive Optoelectronics

Low-dimensional organic–inorganic metal halide hybrids (OMHHs) exhibit remarkable optical properties and enhanced environmental stability. We investigate a 1D OMHH with formula C 4 N 2 H 14 PbBr 4 , consisting of Pb–Br chains separated by organic cations, which shows a large Stokes shift (0.83 eV) and broadband emission. Through first-principles calculations and polarized Raman spectroscopy, we characterize the material's vibrational properties and identify the specific phonon modes that drive exciton self-trapping. Our novel GW/Bethe-Salpeter equation force formalism reveals that low-frequency phonons (∼ 100 cm −1 , primarily involving Pb–Br motions) couple strongly with excitons, with a remarkably high Huang-Rhys factor of 137 ± 4, and gives a pathway for ultrafast structural analysis during the absorption process. This phonon-exciton coupling mechanism explains the material's broadband emission and provides a pathway for controlling optical properties through vibrations and for tuning vibrations through optical excitations. The material also exhibits highly anisotropic optical properties and electronic transport, with bands that are dispersive along the Pb–Br chains but nearly flat in perpendicular directions, resulting in direction-dependent electrical conductivity that is calculated to be an order of magnitude higher along the chain direction and consistent with measurements. These combined properties make this system an excellent platform for polarization-sensitive optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Quaternary i-MAX Phases (Mo 2/3 RE 1/3 ) 2 AlC (RE: Dy, Tb, Er): Experimental Characterization and First-Principles Insights into their Fundamental Properties

Rare earth (RE)-based materials have unique electronic, magnetic, and optical properties, leading to the recent discovery of atomically layered solids with the chemical formula (M' 2/3 RE 1/3 ) 2 AlC, which have since garnered significant attention in the scientific community. This study aims to synthesize, characterize, and investigate the structural and thermal stability of the RE i-MAX phases. We prepared i-MAX phases using molybdenum (Mo) as M′ and RE elements as Dy, Tb, and Er, namely (Mo 2/3 Dy 1/3 ) 2 AlC, (Mo 2/3 Tb 1/3 ) 2 AlC, and (Mo 2/3 Er 1/3 ) 2 AlC. Structural characterization through x-ray diffraction (XRD) and Raman spectroscopy confirms the formation of the RE-based i-MAX phase, along with the presence of minor impurity phases in the alloys. Thermogravimetric analysis (TGA) conducted up to 1000°C under ambient conditions reveals that the i-MAX phases remain thermally stable up to approximately 450°C, beyond which oxidation leads to a noticeable weight gain in all samples. Differential scanning calorimetry (DSC) measurements during heating and cooling cycles show endothermic and exothermic peaks for (Mo 2/3 Dy 1/3 ) 2 AlC i-MAX in the 410–420°C range, indicating a temperature-induced minor atomic arrangement. In contrast, these peaks are absent in the Tb- and Er-based i-MAX phases. These findings offer valuable insights into the thermal behavior and stability of these i-MAX phases under thermal stress, contributing to a deeper understanding of their unique properties. Furthermore, first-principles density functional theory (DFT) calculations were performed to investigate the electronic and optical properties of the i-MAX phases. The results reveal their metallic nature, with pronounced contributions from Mo and RE elements near the Fermi level and within the conduction band.

Rare earth↗