Search NASA⌕ Search

SEARCH · Search NASA

Results for “Os(OF)2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Infrared spectroscopy of the dwarf starburst galaxy Henize 2-10

Researchers present 1.2 to 2.2 micron spectra of the nucleus of Henize 2 to 10, taken at United Kingdom Infrared Telescope (UKIRT) with the cool grating spectrometer 2 (CGS 2). This galaxy displays strong line emission from interstellar H (+) (1.282 and 2.166 microns) and (Fe (+)) (1.256 and 1.644 microns), in common with other star-forming galaxy nuclei. However, the 1 to 0 S(1) line of molecular hydrogen at 2.122 micron is not detected - the upper limit of 0.15 (3 sigma) for the value of the flux ratio I sub 1-os(1)/I sub Br gamma is much lower than the typical values of 0.4 to 0.9 measured in a sample of 28 non-interacting starburst galaxies. From the Pa beta/Br gamma line ratio researchers derive a total extinction of A sub v approx. 4 mag. The de-reddened H (+) and (Fe (+) line fluxes are used to estimate the total ionizing luminosity and the average supernova rate in the central 150 pc of He 2 to 10. By comparison of these estimates with existing Infrared Astronomy Satellite (IRAS) and radio continuum data, researchers are able to set limits on the range of stellar masses present in this unevolved (less than 10(exp 7) year old) starburst nucleus. Possible reasons for the low H2/H+ line ratios observed in young starburst systems (He 2 to 10, NGC 7714, IIZw40; e.g., Moorwood and Oliva 1988) are briefly discussed.

Blanco, P. R.↗

NASIS data base management system - IBM 360/370 OS MVT implementation. 6: NASIS message file

The message file for the NASA Aerospace Safety Information System (NASIS) is discussed. The message file contains all the message and term explanations for the system. The data contained in the file can be broken down into three separate sections: (1) global terms, (2) local terms, and (3) system messages. The various terms are defined and their use within the system is explained.

Source record↗

Possible infrared signature of decaying particles

A scenario for massive decaying particles is proposed which accounts for the detection of the submillimeter isotropic radiation component of the IR background (Matsumoto et al., 1988). The peak of the decay photon spectrum in the scenario is at several microns. The observed spectrum of the IR background is compared to that of decay photons with degraded energy. Within the limits to the radiative decays of neutrinos from gamma-ray observations os SN 1987A, it is found that the observed spectrum of decay photons is consistent with the IR background spectrum for decaying particle masses in the range between 5 and 18 keV, lifetimes in the range 2-7 X 10 to the 10th s, and a photon branching range of 0.0004 and 0.0009.

Wang, Boqi↗

Erlichmanite /OsS sub 2/, a new mineral.

Natural osmium disulfide (termed erlichmanite) was recognized in two occurrences on the basis of electron probe and X-ray data. One occurrence is in grains of platinum-metal sand from California, the other in a platinum-metal nugget from Western Ethiopian laterites. California erlichmanite has Os 68.0, Ir 2.6, Rh 3.8, Ru 0.4, Pd 0.5, and S 25.2, summation of 100.5 wt. %, the number of metal atoms being 1.06 on the basis of 2.00 sulfurs. Ethiopian material has higher Rh and Ir and lower Os. Both are optically isotropic. Spotty X-ray reflections from a 15-micron particle of California erlichmanite give rise to d spacing which match those of synthetic cubic osmium disulfide. Erlichmanite is defined as a cubic disulfide in which osmium is the most abundant metal atom.

Snetsinger, K. G.↗

Meteoritic material in lunar highland samples from the Apollo 11 and 12 sites

Radiochemical neutron activation analyses for Ag, Au, Bi, Br, Cd, Cs, Ge, In, Ir, Ni, Os, Pd, Rb, Re, Sb, Te, Tl, U and Zn were carried out on 11 samples from the Apollo 11 and 12 sites (two samples of rock 12013, one granitic and one KREEPy; 4 KREEP fragments from 2-4 mm soil 12033,2; 4 anorthositic fragments from 1-3 mm soil 10085,104; 1 sample of 'Luny' rock-felsite-KREEP breccia 12013 10085,31 LR-1). Most Apollo 12 samples were found to have an Imbrium meteoritic component; others, typified by the Luny breccia, apparently contain a new meteoritic component of low Re content. Components of higher Ir/Au ratio (3L, 5L and 7) were found in Apollo 11 anorthositic samples; the fact that their enrichment in meteoritic siderophiles parallels that of Fe, Mg, REE and other KREEP elements is consistent with progressive contamination of an anorthositic crust. The Luny rock was tentatively classified Group 2, supporting the assignment of this group to Serenitatis.

Janssens, M.-J.↗

High Pressure and Temperature Core Formation as an Alternative to the "Late Veneer" Hypothesis

The highly siderophile elements (HSE; Re, Au and the Platinum Group Elements - Pd Pt, Rh, Ru, Ir, Os) are commonly utilized to constrain accretion processes in terrestrial differentiated bodies due to their affinity for FeNi metal [1]. These eight elements exhibit highly siderophile behavior, but nonetheless have highly diverse metal-silicate partition coefficients [2]. Therefore the near chondritic relative concentrations of HSEs in the terrestrial and lunar mantles, as well as some other bodies, are attributed to late accretion rather than core formation [1]. Evaluation of competing theories, such as high pressure metal-silicate partitioning or magma ocean hypotheses has been hindered by a lack of relevant partitioning data for this group of eight elements. In particular, systematic studies isolating the effect of one variable (e.g. temperature or melt compositions) are lacking. Here we undertake new experiments on all eight elements, using Fe metal and FeO-bearing silicate melts at fixed pressure, but variable temperatures. These experiments, as well as some additional planned experiments should allow partition coefficients to be more accurately calculated or estimated at the PT conditions and compositions at which core formation is thought to have occurred.

Righter, Kevin↗

Lunar and Planetary Science XXXV: Concerning Chondrites

The Lunar and Planetary Science XXXV session entitled "Concerning Chondrites" includes the following topics: 1) Petrology and Raman Spectroscopy of Shocked Phases in the Gujba CB Chondrite and the Shock History of the CB Parent Body; 2) The Relationship Between CK and CV Chondrites: A Single Parent Body Source? 3) Samples of Asteroid Surface Ponded Deposits in Chondritic Meteorites; 4) Composition and Origin of SiO2-rich Objects in Carbonaceous and Ordinary Chondrites; 5) Re-Os Systematics and HSE distribution in Tieschitz (H3.6); Two Isochrons for One Meteorite; 6) Loss of Chromium from Olivine During the Metamorphism of Chondrites; 7) Very Short Delivery Times of Meteorites After the L-Chondrite Parent Body Break-Up 480 Myr Ago; and 8) The Complex Exposure History of a Very Large L/LL5 Chondrite Shower: Queen Alexandra Range 90201.

Source record↗

Scientific Value of Including an Atmospheric Sample as Part of Mars Sample Return (MSR)

The Perseverance rover is meant to collect samples of the martian surface for eventual return to Earth. The headspace gas present over the solid samples within the sample tubes will be of significant scientific interest for what it reveals about the interactions of the solid samples with the trapped atmosphere and for what it will reveal about the martian atmosphere itself. However, establishing the composition of the martian atmosphere will require other dedicated samples. The headspace gas as the sole atmospheric sample is problematic for many reasons. The quantity of gas present within the sample tube volume is insufficient for many investigations, and there will be exchange between solid samples, headspace gas, and tube walls. Importantly, the sample tube materials and preparation were not designed for optimal Mars atmospheric gas collection and storage as they were not sent to Mars in a degassed evacuated state and have been exposed to both Earth's and Mars' atmospheres. Additionally, there is a risk of unconstrained seal leakage in transit back to Earth, which would allow fractionation of the sample (leak-out) and contamination (leak-in). The science return can be improved significantly (and, in some cases, dramatically) by adding one or more of several strategies listed here in increasing order of effectiveness and difficulty of implementation: (1) Having Perseverance collect a gas sample in an empty sample tube, (2) Collecting gas in a newly-designed, valved, sample-tube-sized vessel that is flown on either the Sample Fetch Rover (SFR) or the Sample Retrieval Lander (SRL), (3) Adding a larger (50-100 cc) dedicated gas sampling volume to the Orbiting Sample container (OS), (4) Adding a larger (50-100 cc) dedicated gas sampling volume to the OS that can be filled with compressed martian atmosphere.

Timothy D. Swindle↗

Detection os X-rays from SN 1993J with ASCA

ASCA observed SN 1993J seven times between April 5 and October 24 in 1993. The 1-10 keV luminosity 10d after the explosion was (15 +/- 4) x 10(exp 39) erg/s and decreased monotonicly to (1.3 +/- 0.4) x 10(exp 39) erg/s 210 d after the explosion, when a distance of 3.6 Mpc was assumed. The hardness ratio (2-10 keV/0.5-2 keV) significantly decreased during the course of the observations. The spectrum obtained from a sky region including not only SN 1993J but also the nearby X-ray source clearly shows an iron emission line. The correlation between the iron line flux with the SN 1993J flux suggests that the iron line emission originated in SN 1993J. These observational results are discussed in the context of thermal X-ray emission from a hot region behind the shock due to the collision of the supernova ejecta with the pre-supernova stellar wind.

Kohmura, Yoshiki↗

Os, Sr, Nd, and Pb isotope systematics of southern African peridotite xenoliths - Implications for the chemical evolution of subcontinental mantle

Isotope analyses of Os, Sr, Nd, and Pb elements were caried out on twelve peridotite xenoliths from the Jagersfontein, Letseng-la-terae, Thaba Patsoa, Mothae, and Premier kimberlites of southern Africa, to investigate the timing and the nature of melt extraction from the continental lithosphere and its relation to the continent formation and stabilization. The distinct Os and Pb isotopic characteristics found in these samples suggested that both the low- and the high-temperature peridotites reside in an ancient stable lithospheric 'keel' to the craton that has been isolated from chemical exchange with the sublithospheric mantle for time periods in excess of 2 Ga.

Walker, R. J.↗

Sulfide Stability of Planetary Basalts

The isotopic system, 187Re 187Os, can be used to determine the role of crust and mantle in magma genesis. In order to apply the system to natural samples, we must understand variations in Re/Os concentrations. It is thought that low [Os] and [Re] in basalts can be attributed to sulfide (FeS) saturation, as Re behaves incompatibly to high degrees of evolution until sulfide saturation occurs [1]. Previous work has shown that lunar basalts are sulfide under-saturated, and mid-ocean ridge, ocean-island and Martian (shergottites) basalts are saturated [2,3]. However, little is known about arc basalts. In this study, basaltic rocks were analyzed across the Trans-Mexican Volcanic Belt.

Caiazza, C. M.↗

The Disposition of Pt, Pd, Ir, Os, and Ru in Marine Sediments and the K/T Boundary

The marine record of platinum group elements (PGEs) and Os isotopic compositions provides information on different inputs of PGEs into the oceans. Some studies based on a smaller subset of the PGEs suggest that the PGEs may suffer post-depositional mobility during diagenesis. In some K/T boundary clays, Kyte and others showed that the relative abundances of Pt, Pd, Ir, and Os can differ significantly from chondritic, which is the signature expected from fallout of the meteorite impact. In some K/T boundary sections, elevated Ir concentrations are observed as far as 1 meter from the cm-thick boundary clay containing the meteoritic ejecta. The purpose of this study was to characterize Pt, Pd, Ir, Os, and Ru abundances in zones including the K/T boundary. We determined PGE abundances of boundary clays at two hemipelagic sites (Stevns Klint, Denmark and Caravaca, Spain) in which previous studies by Kyte and others showed that the Ir anomaly is confined to within a few cm. We also analyzed two pelagic Pacific sites: a boundary clay from the north Pacific (Hole 465A) characterized by a 0.5 m thick Ir anomaly and a transect across the K/T boundary from the south Pacific (Hole 596) where the Ir anomaly spans 2 m. The Stevns Klint, Caravaca, and north Pacific sites are characterized by abundant marls and limestones in the section, whereas the south Pacific site is dominated by clays. Samples were spiked with isotopic tracers, mixed with a flux, S and Ni, and equilibrated by fusion. PGEs were extracted from the Ni and analyzed on a Finnigan Element ICP-MS. We find that the narrow Caravaca and Stevns Klint boundary clays have relative PGE abundance patterns indistinguishable from chondritic values. The two Pacific sites were found to have nearly identical PGE patterns but have ratios at the peak, which differ from chondritic values as found earlier by Evans et al. The Pacific sites were found to have nearly identical PGE patterns but are extremely depleted in OS (Os/Ir = 0.07-0.15) and slightly enriched in Pd and Pt relative to Ir.

Lee, Cin-Ty↗

Results of tests of advanced flexible insulation vortex and flow environments in the North American Aerodynamics Laboratory lowspeed wind tunnel using 0.0405-scale Space Shuttle Orbiter model 16-0 (test OA-309)

An experimental investigation (Test OA-309) was conducted using 0.0405-scale Space Shuttle Orbiter Model 16-0 in the North American Aerodynamics Laboratory 7.75 x 11.00-foot Lowspeed Wind Tunnel. The primary purpose was to locate and study any flow conditions or vortices that might have caused damage to the Advanced Flexible Reusable Surface Insulation (AFRSI) during the Space Transportation System STS-6 mission. A secondary objective was to evaluate vortex generators to be used for Wind Tunnel Test OS-314. Flowfield visualization was obtained by means of smoke, tufts, and oil flow. The test was conducted at Mach numbers between 0.07 and 0.23 and at dynamic pressures between 7 and 35 pounds per square foot. The angle-of-attack range of the model was -5 degrees through 35 degrees at 0 or 2 degrees of sideslip, while roll angle was held constant at zero degrees. The vortex generators were studied at angles of 0, 5, 10, and 15 degrees.

Marshall, B. A.↗

View factor computer program (program view) user's manual

The purpose of program VIEW is to compute view factors between specified surfaces and to be compatible with level 15.5 of the NASTRAN structural analysis program. Program VIEW is a modification of a (finite element) view factor computation program called RAVFAC. VIEW is designed to run on an IBM System/360 operating under OS (operating system), with a minimum region size of 110 K bytes. The actual computation of view factors is still performed exactly as it was in the original version of RAVFAC. In developing VIEW, RAVFAC was modified to satisfy the following compatibility requirements: (1) accept finite element input which can also be used as input to NASTRAN, (2) produce output (view factors) in a format which can be used as input to NASTRAN, and (3) follow NASTRAN program design so that in the future VIEW can be incorporated into NASTRAN as a subroutine. The VIEW program permits computation of the view factors between surfaces, taking into account the presence of any intermediate surfaces. VIEW also computes these view factors either by contour integration or by finite difference (double summation) methods.

Puccinelli, E. F.↗

Noble metal abundances in an early Archean impact deposit

Detailed analyses are reported on the concentrations of the noble metals Pd, Os, Ir, Pt, and Au in an early Archean spherule bed (S4) of probably impact origin from the lower Fig Tree Group, Barberton Greenstone Belt, South Africa. Compared to other sedimentary deposits of known or suspected impact origin, some noble metals are present in exceptionally high concentrations. Noble metal abundances are fractionated relative to abundances in chondrites with ratios of Os/Ir, Pt/Ir, Pd/Ir, and Au/Ir at only 80, 80, 41, and 2 percent of these values on CI chondrites. Although an extraterrestrial source is favored for the noble metal enrichment, the most plausible cause of the fractionation is by regional hydrothermal/metasomatic alteration.

Kyte, Frank T.↗

Carbon Dioxide Gas Sensors and Method of Manufacturing and Using Same

A gas sensor includes a substrate and a pair of interdigitated metal electrodes selected from the group consisting of Pt, Pd, Au, Ir, Ag, Ru, Rh, In, and Os. The electrodes each include an upper surface. A first solid electrolyte resides between the interdigitated electrodes and partially engages the upper surfaces of the electrodes. The first solid electrolyte is selected from the group consisting of NASICON, LISICON, KSICON, and .beta.''-Alumina (beta prime-prime alumina in which when prepared as an electrolyte is complexed with a mobile ion selected from the group consisting of Na.sup.+, K.sup.+, Li.sup.+, Ag.sup.+, H.sup.+, Pb.sup.2+, Sr.sup.2+ or Ba.sup.2+). A second electrolyte partially engages the upper surfaces of the electrodes and engages the first solid electrolyte in at least one point. The second electrolyte is selected from the group of compounds consisting of Na.sup.+, K.sup.+, Li.sup.+, Ag.sup.+, H.sup.+, Pb.sup.2+, Sr.sup.2+ or Ba.sup.2+ ions or combinations thereof.

Hunter, Gary W.↗

Carbon Dioxide Gas Sensors and Method of Manufacturing and Using Same

A gas sensor comprises a substrate layer; a pair of interdigitated metal electrodes, said electrodes include upper surfaces, the electrodes selected from the group consisting of Pt, Pd, Au, Ir, Ag, Ru, Rh, In, Os, and their alloys. A first layer of solid electrolyte staying in between electrode fingers and partially on said upper surfaces of said electrodes, said first layer selected from NASICON, LISICON, KSICON and.beta.''-Alumina. A second layer of metal carbonate(s) as an auxiliary electrolyte engaging said upper surfaces of the electrodes and the first solid electrolyte. The metal carbonates selected from the group consisting of the following ions Na.sup.+, K.sup.+, Li.sup.+, Ag.sup.+, H.sup.+, Pb.sup.2+, Sr.sup.2+, Ba.sup.2+, and any combination thereof. An extra layer of metal oxide selected from the group consisting of SnO.sub.2, In.sub.2O.sub.3, TiO.sub.2, WO.sub.3, ZnO, Fe.sub.2O.sub.3, ITO, CdO, U.sub.3O.sub.8, Ta.sub.2O.sub.5, BaO, MoO.sub.2, MoO.sub.3, V.sub.2O.sub.5, Nb.sub.2O.sub.5, CuO, Cr.sub.2O.sub.3, La.sub.2O.sub.3, RuO.sub.3, RuO.sub.2, ReO.sub.2, ReO.sub.3, Ag.sub.2O, CoO, Cu.sub.2O, SnO, NiO, Pr.sub.2O.sub.3, BaO, PdO.sub.2, HfO.sub.3, HfO.sub.3 or other metal oxide and their mixtures residing above and in engagement with the second electrolyte to improve sensor performance and/or to reduce sensor heating power consumption.

Hunter, Gary W.↗

Experimental Study of the Partitioning of Siderophile Elements in a Crystallizing Lunar Magma Ocean

The distributions of trace elements between the lunar interior and pristine crustal rocks were controlled by the composition of starting materials, lunar core formation, and crystallization of the lunar magma ocean (LMO) [1]. This study focuses on the partitioning of highly siderophile elements (HSE) including Re, Os, Ir, Ru, Pt, Rh, Pd and Au as well as the moderately siderophile elements Mo and W, and the lithophile elements of Hf and Sr. Our experiments also include Ga, which can be slightly siderophile, but is mostly considered to be chalcophile. Partitioning of these elements is not well known at the conditions of a crystallizing LMO. Previous studies of HSE partitioning in silicate systems have yielded highly variable results for differing oxygen fugacity (fO2) and pressure [2-4]. For example, under certain conditions Pt is compatible in clinopy-roxene [2] and Rh and Ru are compatible in olivine [3]. The silicate compositions used for these experiments were nominally basaltic. Ruthenium, Rh, and Pd are incompatible in plagioclase under these conditions[4]. However, this latter study was done at extremely oxidizing conditions and at atmospheric pressure, possibly limiting the applicability for consideration of conditions of a crystallizing LMO. In this study we address the effects of pressure and oxygen fugacity on the crystal/liquid partition coefficients of these trace elements. We are especially interested in the plagioclase/melt partition coefficients so that it may be possible to use reverse modeling to constrain the concentrations of these elements in the lunar mantle through their abundances in pristine crustal rocks.

Galenas, M.↗