Search NASA⌕ Search

SEARCH · Search NASA

Results for “PAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

STS-112 Mission Highlights Resource, Part 3 of 3

The STS-112 Mission begins with a view of the center radiator on the S(1) Truss. A good view of the International Space Station's (ISS) Destiny Laboratory, Soyuz Crew Return Vehicle and Quest Airlock are shown from a video camera located at the end of the S(1) Truss Segment. The ISS Canadarm 2 is shown getting in position for spacewalk three. Highlights of flight day eight begin with Pilot Pam Melroy and Mission Specialist Fyodur Yurchikhin shown inside of the Quest Airlock closing the hatch as spacewalkers David Wolf and Piers Sellers move in the outer compartment of the Airlock to begin Extravehicular Activity 3 (EVA 3). During EVA 3, Dave Wolf and Piers Sellers are installing spool positioning devices on ammonia lines located on the ISS. Robot Arm Operators Peggy Whitson and Sandy Magnus are shown reviewing procedures for operating the robot arm. A view of Piers Seller climbing back into the Quest Airlock is presented. During flight day nine, robot arm operators Pam Melroy, Jeff Ashby and Peggy Whitson are in the process of removing spacesuits worn by David Wolf and Piers Sellers. A final farewell of the nine crewmembers shown inside of the Destiny Laboratory is presented during flight day ten. The undocking of Space Shuttle Atlantis from the International Space Station is shown on flight day eleven. This presentation ends on flight day 12 with a view of head up displays and the actual landing of the Space Shuttle Atlantis.

Source record↗
NASA NTRS2019

Diurnal and Seasonal Solar Induced Chlorophyll Fluorescence and Photosynthesis in a Boreal Scots Pine Canopy

Solar induced chlorophyll fluorescence has been shown to be increasingly an useful proxy for the estimation of gross primary productivity (GPP), at a range of spatial scales. Here, we explore the seasonality in a continuous time series of canopy solar induced fluorescence (hereafter SiF) and its relation to canopy gross primary production (GPP), canopy light use efficiency (LUE), and direct estimates of leaf level photochemical efficiency in an evergreen canopy. SiF was calculated using infilling in two bands from the incoming and reflected radiance using a pair of Ocean Optics USB2000+ spectrometers operated in a dual field of view mode, sampling at a 30 min time step using custom written automated software, from early spring through until autumn in 2011. The optical system was mounted on a tower of 18 m height adjacent to an eddy covariance system, to observe a boreal forest ecosystem dominated by Scots pine. (Pinus sylvestris) A Walz MONITORING-PAM, multi fluorimeter system, was simultaneously mounted within the canopy adjacent to the footprint sampled by the optical system. Following correction of the SiF data for O2 and structural effects, SiF, SiF yield, LUE, the photochemicsl reflectance index (PRI), and the normalized difference vegetation index (NDVI) exhibited a seasonal pattern that followed GPP sampled by the eddy covariance system. Due to the complexities of solar azimuth and zenith angle (SZA) over the season on the SiF signal, correlations between SiF, SiF yield, GPP, and LUE were assessed on SZA <50° and under strictly clear sky conditions. Correlations found, even under these screened scenarios, resulted around ~r2 = 0.3. The diurnal responses of SiF, SiF yield, PAM estimates of effective quantum yield (ΔF/Fm′), and meteorological parameters demonstrated some agreement over the diurnal cycle. The challenges inherent in SiF retrievals in boreal evergreen ecosystems are discussed.

photosynthetic↗
NASA NTRS2020

Investigation Of Prandtl-Ishlinskii Hysteresis Compensation for Deep Space Optical Communications Pointing Control

This paper studies the simulated performance of the Deep Space Optical Communication (DSOC) laser downlink pointing control system that has a pointing requirement at the sub-microradian scale. To achieve the required pointing precision, the DSOC Flight Laser Transceiver (FLT) point-ahead mirror (PAM) employs piezoelectric actuators, which are widely used in precision applications due to their high motion resolution, rapid response, and high output forces. However, a piezoelectric actuator's performance is often limited by nonlinearities in their response, most significantly hysteresis. To study the effect of hysteresis on our simulated pointing performance, an invertible hysteresis model is developed using the Classical Prantdl-Ishlinskii (CPI) method. The simulation includes models of DSOC hardware and electronic system components based on key parameters (bias, frequency response, noise), with the hysteresis modeled in the PAM piezo actuator dynamics. A Proportional-Integral controller provides feedback with measurements from two potential sources: strain gauge sensors or a photon-counting camera. To compensate for hysteresis behavior, a feedforward inverse CPI hysteresis model is implemented in the control system. Two CPI models are built using different sampling methods (uniform sampling and cosine spacing) and controller performance is compared. For the maximum command range of ±400 μrad at 1 mHz, results show that the feedforward combined with feedback control reduces output tracking error by 50% or 58% (to 0.20 or 0.38 μrad) compared to feedback control alone (from 0.40 or 0.90 μrad), corresponding to the uniform-sampled and cosine-sampled CPI models, respectively.

Marinello, Lindsey A.↗
NASA NTRS1978

A digital audio/video interleaving system

A method of interleaving an audio signal with its associated video signal for simultaneous transmission or recording, and the subsequent separation of the two signals, is described. Comparisons are made between the new audio signal interleaving system and the Skylab Pam audio/video interleaving system, pointing out improvements gained by using the digital audio/video interleaving system. It was found that the digital technique is the simplest, most effective and most reliable method for interleaving audio and/or other types of data into the video signal for the Shuttle Orbiter application. Details of the design of a multiplexer capable of accommodating two basic data channels, each consisting of a single 31.5-kb/s digital bit stream are given. An adaptive slope delta modulation system is introduced to digitize audio signals, producing a high immunity of work intelligibility to channel errors, primarily due to the robust nature of the delta-modulation algorithm.

Richards, R. W.↗
NASA NTRS1981

The estimation of genetic divergence

Consideration is given to the criticism of Nei and Tateno (1978) of the REH (random evolutionary hits) theory of genetic divergence in nucleic acids and proteins, and to their proposed alternative estimator of total fixed mutations designated X2. It is argued that the assumption of nonuniform amino acid or nucleotide substitution will necessarily increase REH estimates relative to those made for a model where each locus has an equal likelihood of fixing mutations, thus the resulting value will not be an overestimation. The relative values of X2 and measures calculated on the basis of the PAM and REH theories for the number of nucleotide substitutions necessary to explain a given number of observed amino acid differences between two homologous proteins are compared, and the smaller values of X2 are attributed to (1) a mathematical model based on the incorrect assumption that an entire structural gene is free to fix mutations and (2) the assumptions of different numbers of variable codons for the X2 and REH calculations. Results of a repeat of the computer simulations of Nei and Tateno are presented which, in contrast to the original results, confirm the REH theory. It is pointed out that while a negative correlation is observed between estimations of the fixation intensity per varion and the number of varions for a given pair of sequences, the correlation between the two fixation intensities and varion numbers of two different pairs of sequences need not be negative. Finally, REH theory is used to resolve a paradox concerning the high rate of covarion turnover and the nature of general function sites as permanent covarions.

Holmquist, R.↗
NASA NTRS1981

Low cost transfer into useful sun-synchronous orbits at Mars

Mars oblateness has been found to provide sun-synchronous orbits, including orbits with stationary apsides, similar to those used at earth. A low mass and low data rate complement of scientific instruments placed in such orbits can provide exciting planetary investigations such as the Mars Orbiter Water Mission described herein. Use of a modest Shuttle kickstage (PAM-A) and existing spacecraft hardware makes this mission low-cost. A preliminary mission and spacecraft design is described. The major emphasis of the paper is on the mechanics of heliocentric transfer for the 1986 and 1988 launch opportunities, Martian sun-synchronous orbit geometries, injectable mass capabilities, and methods of achieving these scientifically useful orbits.

Glickman, R. E.↗
NASA NTRS1982

WESTAR-V launch on delta

The WESTAR-V, the second in a series of second-generation, large, 24-transponder communications satellites developed for the Space Communications Company is discussed. It is scheduled to be launched on a Delta vehicle from the Eastern Space and Missile Center no earlier than June 8, 1982. The launch support for this mission will be provided by NASA, on a reimbursable basis, to the Space Communications Company for a fixed price of $25.OM. The launch vehicle for the WESTAR-V mission will be the Delta 3910 configuration which incorporates an extended long tank Thor booster, nine Castor IV strap-on motors, a TR-201 second stage, and an 8-foot fairing. The Delta launch vehicle will place the spacecraft along a suborbital trajectory. The PAM-D stage will then thrust it to a synchronous transfer orbit. Three days after launch, the spacecraft apogee kick motor will be fired to circularize its orbit at geosynchronous altitude of 19,300 NM above the equator at approxmately 75 degrees west longitude.

Source record↗
NASA NTRS1982

The Delta improved second stage - First flight results

On July 16, 1982 the successful launch of the Landsat-D spacecraft marked a significant step in the evolutionary growth of the Delta launch vehicle. This growth is related to the development of the Improved Second Stage (ISS). The second utilization of the ISS occurred August 26, 1982 with the successful launch of the Canadian Telesat-F communications satellite. Used in conjunction with the PAM third stage, this spacecraft was placed in a geosynchronous transfer orbit with extremely high accuracy. The various steps in the 22-year history of the Delta launch vehicle are briefly examined. In mid-1979 it became apparent that the expendable-to-Shuttle transition time would increase over that previously planned. In connection with this development, it was decided to design the ISS. Attention is given to design details, a system description, the development schedule, aspects of performance capability, first flight results, and future performance improvements.

Grimes, D. W.↗
NASA NTRS1983

Telesat-G/Delta post launch report

The Canadiari Telesat-G (ANIK-D1) commercial communications satellite was launched successfully from the Eastern space and Missile Center (ESMC) at 7:10 p.m., EDT, on August 25, 1982, by a Delta 3920 Vehicle, Mission Number 164. Performance of the two stage Delta launch vehicle was nominal and placed the payload in a low circular orbit as planned. The Payload Assist Module (PAM-D), which is part of the payload, also performed nominally. The synchronous transfer orbital elements achieved by Delta/PAM, compared with the nominal expected, are provided. The satellite performed satisfactorily during the transfer orbit, and the ABM was fired successfully at 5:29 p.m., EDT, on August 29, 1982. The satellite was maneuvered to a position 104 degrees West Longitude above the equator. Satellite status is satisfactory and it has entered service.

Mahon, J. B.↗
NASA NTRS1983

Low-cost, focused-science Mars mission

The Mars Orbiter Water Mission (MOWM) is discussed as an example of a low-cost, low-risk focused-science Mars mission which might be implemented in the near term within recently imposed fiscal constraints. MOWM is designed to act as a follow-on to the Viking results in the areas of comparative climatology and water, carbon dioxide and dust inventories. The STS-compatible space vehicle would be based on proven earth-orbiting satellite hardware, fulfilling requirements for both spinning and despun components, operation with nonoptimum solar cell orientation, PAM-A upper stage compatibility, and data storage for delayed transmission. Study results have shown the technical and economic feasibility of missions based on any of four submitted designs which meet these requirements, and of low-cost, well-focused science objective Mars missions in general.

Stuart, J. R.↗
NASA NTRS1982

Space transportation

The physical laws governing launch vehicles are reviewed, together with the performance of launch vehicles thus far used and expected developments in space transportation systems. Launches are generally made in the direction of earth rotation to take advantage of the initial velocity in that direction, which can amount to about 0.46 km/sec at the equator. Spacecraft usually attain a parking orbit, where spacecraft conditions are assessed before moving on to final orbit or interplanetary trajectory. Rocket batteries were first used in a battle near Beijing in 1232, and manned space flight began with the Vostok flight in 1961, followed by the Apollo lunar landings in the later 1960s. Rocket thrust performance is analyzed, together with the thrust/mass ratio for ascent and descent. The Shuttle, capable of placing 29.5 t in LEO, will be or is equipped to also carry IUS and PAM engines for transferring payloads from LEO to GEO. Parallel burn boosters may be added to increase the payload capability, and Shuttle-derived launch vehicles may be developed to carry construction materials to space and return to earth for a runway landing. Alternatively, the Shuttle engines may be modularized in order to develop a heavy-lift launch vehicle for unmanned cargo ascents.

Davis, H.↗
NASA NTRS1983

Processing cargoes for the first two operational STS flights at KSC

Payload and spacecraft check-out procedures followed at Kennedy Space Center (KSC) are described, and examples are furnished of Shuttle missions STS-5 and -6. Reliability must be assured in order to account for isolated operation in GEO once the satellites are released from the Orbiter. The spacecraft processing is handled in distinct flows that depend on the type of boost engine attached, e.g., the PAM-A, -D, or the IUS. Interface verification occurs in the Vehicle Processing Facility (VPF), which is equipped to store the payloads until an Orbiter is ready. Spacecraft are assigned to their respective processing lines by the Launch Site Support Manager. The STS-5 Orbiter was fitted with Getaway Specials, the SBS-C satellite, and the Anik-C spacecraft, and STS-6 carried the TDRSS-A spacecraft, which was mated to an IUS, three Getaway Specials, and two experiments for the pressurized cabin. The time necessary for preparing payloads is intended eventually to be reduced to 3 weeks.

Neilon, J. J.↗
NASA NTRS1984

Space Aging of Solid Rocket Materials (P0005)

The objective of this experiment is to determine the effects of long-term orbital exposure on the materials used in solid-rocket space motors. Specifically, structural materials and propellants from the STAR/PAM-D series motors and the PAM DII/IPSM-II motors will be tested, as well as advanced composite case and nozzle materials planned for future use. The experiment approach is to expose samples of solid-rocket propellant, liner, insulation, case, and nozzle specimens to the space environment and to compare preflight and postflight measurements of various mechanical, chemical, and ballistic properties.

Leon L Jones↗
NASA NTRS1982

Delta capability for launch of communications satellites

The evolution of capabilities and the current performance levels of the Delta launch vehicle are outlined. The first payload was the Echo I passive communications satellite, weighing 179 lb, and placed in GEO in 1960. Emphasis since then has been to use off-the-shelf hardware where feasible. The latest version in the 3924 first stage, 3920 second stage, and Pam D apogee kick motor third stage. The Delta is presently equipped to place 2800 lb in GEO, as was proven with the 2717 lb Anik-D1 satellite. The GEO payload placement performance matches the Shuttle's, and work is therefore under way to enhance the Delta performance to handle more massive payloads. Installation of the Castor-IV solid motor separation system, thereby saving mass by utilizing compressed nitrogen, rather than mechanical thrusters to remove the strap-on boosters, is indicated, together with use of a higher performance propellant and a wider nose fairing.

Grimes, D. W.↗
NASA NTRS1984

Modular experimental platform for science and applications

A modularized, standardized spacecraft bus, known as MESA, suitable for a variety of science and applications missions is discussed. The basic bus consists of a simple structural arrangement housing attitude control, telemetry/command, electrical power, propulsion and thermal control subsystems. The general arrangement allows extensive subsystem adaptation to mission needs. Kits provide for the addition of tape recorders, increased power levels and propulsion growth. Both 3-axis and spin stabilized flight proven attitude control subsystems are available. The MESA bus can be launched on Ariane, as a secondary payload for low cost, or on the STS with a PAM-D or other suitable upper stage. Multi-spacecraft launches are possible with either booster. Launch vehicle integration is simple and cost-effective. The low cost of the MESA bus is achieved by the extensive utilization of existing subsystem design concepts and equipment, and efficient program management and test integration techniques.

Hill, A. S.↗