Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHOSPHORUS COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Crystal-Physical Model of Ion Transport in Nonlinear Optical Crystals of KTiOPO{sub 4}

The ionic conductivity along the principal axes a, b, and c of the unit cell of the nonlinear-optical high-resistance KTiOPO{sub 4} single crystals (rhombic syngony, space group Pna2{sub 1}), which are as-grown and after thermal annealing in vacuum, has been investigated by the method of impedance spectroscopy. The crystals were grown from a solution-melt by the Czochralski method. The as-grown KTiOPO{sub 4} crystals possess a quasi-one-dimensional conductivity along the crystallographic c axis, which is caused by the migration of K{sup +} cations: σ{sub ║c} = 1.0 × 10{sup –5} S/cm at 573 K. Wherein the characteristics of the anisotropy of ionic conductivity of the crystals is equal to σ{sub ║c}/σ{sub ║a}= 3 and σ{sub ║c}/σ{sub ║b}= 24. The thermal annealing at 1000 K for 10 h in vacuum increases the magnitude of σ{sub ║c} of KTiOPO{sub 4} by a factor of 28 and leads to an increase in the ratio σ{sub ║c}/σ{sub ║b}= 2.1 × 10{sup 3} at 573 K. A crystal-physical model of ionic transport in KTiOPO{sub 4} crystals has been proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stimulated Emission at 1.3-μm Wavelength in Metamorphic InGaAs/InGaAsP Structure with Quantum Wells Grown on Ge/Si(001) Substrate

A laser structure comprising metamorphic InGaAsP layer and InGaAs quantum wells on a non-inclined Si(001) substrate with relaxed Ge buffer layer has been grown for the first time by metal-organic vapor phase epitaxy (MOVPE). The optically pumped lasers exhibit stimulated emission at a wavelength of 1.3 μm. At liquid-nitrogen temperature, the threshold power density of pumping at 0.8 μm amounted to 250 kW/cm{sup 2}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Algae Production from Wastewater Resources: An Engineering and Cost Analysis

Co-locating algae cultivation ponds near municipal wastewater (MWW) facilities provides the opportunity to make use of the nitrogen and phosphorus compounds in the wastewater as nutrient sources for the algae. This use benefits MWW facilities, the algae biomass and biofuel or bioproduct industry, and the users of streams where treated or untreated waste would be discharged. Nutrient compounds can lead to eutrophication, hypoxia, and adverse effects to some organisms if released downstream. This analysis presents an estimate of the cost savings made possible to cultivation facilities by using the nutrients from wastewater for algae growth rather than purchase of the nutrients. The analysis takes into consideration the cost of pipe transport from the wastewater facility to the algae ponds, a cost factor that has not been publicly documented in the past. The results show that the savings in nutrient costs can support a wastewater transport distance up to 10 miles for a 1000-acre-pond facility, with potential adjustments for different operating assumptions.

09 BIOMASS FUELS↗

Effects of Media Nutrient Variation on Microalgae Productivity and Economics During Semi-Continuous Cultivation

The development of large-scale microalgae growth for biofuel production is currently limited by the cost of biomass production. However, new approaches to infrastructure and cultivation practices are bringing the field closer to realization. Macronutrients in the cultivation media contribute significant costs, especially since their concentrations have not been optimized for specific strains and conditions. Environmental photobioreactors (ePBRs) were used to simulate cultivation under outdoor conditions, during which the nitrogen and phosphorus levels in the media were varied. The growth of two potential biofuel production strains, Picochlorum celeri and Tetraselmis striata, with varying nutrient inputs during summer and winter scripts, respectively, was studied. This study demonstrated that nitrogen and phosphorus in f/2 media could be reduced by more than 60% from the standard formulation, while maintaining growth rates in a semi-continuous harvesting approach. Experiments comparing the standard and reduced nutrient input concentrations were also conducted for both species in 820 L outdoor raceway ponds, in Mesa, AZ. P. celeri grown in these ponds in October had a growth rate of 10.6 ± 0.7 g/m 2 /day and 10.6 ± 0.3 g/m 2 /day for the standard and low-nutrient P. celeri ponds, respectively. T. striata grown in April–May had a growth rate of 16.6 ± 1.4 g/m 2 /day for the standard nutrient input ponds and 17.4 ± 1.1 g/m 2 /day for the low-nutrient input ponds, and in October 14.5 ± 0.6 g/m 2 /day for standard nutrient ponds and 14.4 ± 0.6 g/m 2 /day for low-nutrient ponds. These outdoor data therefore confirmed the indoor ePBR data. Techno-economic analysis shows that, if high growth rates can be attained at lower nutrient concentrations, a reduction of at least 60% in nutrient costs can be achieved. Such results highlight the importance of managing macronutrient media inputs, as these have a considerable contribution to biomass production costs in large-scale facilities. The analysis also points to the importance of maintaining high spent medium recycling rates in an industrial deployment, so as to minimize the losses of nitrogen and phosphorus compounds.

09 BIOMASS FUELS↗

Induction of plasma acetylcholinesterase activity in mice challenged with organophosphorus poisons

The restoration of plasma acetylcholinesterase activity in mice following inhibition by organophosphorus pesticides and nerve agents has been attributed to synthesis of new enzyme. It is generally assumed that activity levels return to normal, are stable and do not exceed the normal level. We have observed over the past 10 years that recovery of acetylcholinesterase activity levels in mice treated with organophosphorus agents (OP) exceeds pretreatment levels and remains elevated for up to 2 months. The most dramatic case was in mice treated with tri-cresyl phosphate and tri-ortho-cresyl phosphate, where plasma acetylcholinesterase activity rebounded to a level 250% higher than the pretreatment activity. The present report summarizes our observations on plasma acetylcholinesterase activity in mice treated with chlorpyrifos, chlorpyrifos oxon, diazinon, tri-ortho-cresyl phosphate, tri-cresyl phosphate, tabun thiocholine, parathion, dichlorvos, and diisopropylfluorophosphate. We have developed a hypothesis to explain the excess acetylcholinesterase activity, based on published observations. We hypothesize that acetylcholinesterase activity is induced when cells undergo apoptosis and that consequently there is a rise in the level of plasma acetylcholinesterase. - Highlights: > Acetylcholinesterase activity is induced by organophosphorus agents. > AChE induction is related to apoptosis. > Induction of AChE activity by OP is independent of BChE.

60 APPLIED LIFE SCIENCES↗

EFFECT OF THE CLAY MODIFICATION ON THE THERMAL PROPERTIES OF PVC

The intercalation of organic compound is necessary to functionalize the montmorillonite surface. So, the intercalation of diethylene glycol and polyethylene glycol and the influence of plasticizer, namely tricresyl phosphate and isodecyldiphenyl phosphate as co-intercalating agents were studied. For the PVC/clay nanocomposites the suspension type of PVC was used and the compound was prepared by the melt intercalation method. Two kinds of MMT (Cloisite registered Na{sup +}, Cloisite registered 30B) and laboratory modified MMT by intercalation (diethylene glycol, polyethylene glycol) and co-intercalation (tricresyl phosphate and isodecildifenyl phosphate) agents were used for the set of nanocomposite samples. The thermal stability of nanocomposite specimens was tested using of thermo gravimetric analysis, DMA and pH method.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermoelectric Power (TEP) of Semiconducting Nickel-Phosphate Glasses

The TEP of binary NiO-P{sub 2}O{sub 5} bulk glasses of different compositions was measured. A specially design sample holder was used to measure the thermal EMF in the temperature range 303 to 530 K. The temperature difference between upper and lower surfaces maintained between 5 and 10 K. The investigations provide information on the polaron formation and the disorder energy due to random fields. The TEP found to be dependent on the NiO content and the temperature independent of TEP. Heikes' formula for the TEP can give an adequate explanation for the experimental data.

36 MATERIALS SCIENCE↗

The effect of interferon-{alpha} on the expression of cytochrome P450 3A4 in human hepatoma cells

Interferon {alpha} (IFN{alpha}) is used to treat malignancies and chronic viral infections. It has been found to decrease the rate of drug metabolism by acting on cytochrome P450 enzymes, but no studies have investigated the consequences of IFN{alpha} treatment on the CYP3A4 isoform, responsible for the metabolism of a majority of drugs. In this study, we have examined the effect of IFN{alpha} on CYP3A4 catalytic activity and expression in human hepatoma cells. We found that IFN{alpha} inhibits CYP3A4 activity and rapidly down-regulates the expression of CYP3A4, independent of de novo protein synthesis. Pharmacologic inhibitors and a dominant-negative mutant expression plasmid were used to dissect the molecular pathway required for CYP3A4 suppression, revealing roles for Jak1 and Stat1 and eliminating the involvement of the p38 mitogen-activated and extracellular regulated kinases. Treatment of hepatoma cells with IFN{alpha} did not affect the nuclear localization or relative abundance of Sp1 and Sp3 transcription factors, suggesting that the suppression of CYP3A4 by IFN{alpha} does not result from inhibitory Sp3 out-competing Sp1. To our knowledge, this is the first report that IFN{alpha} down-regulates CYP3A4 expression largely through the JAK-STAT pathway. Since IFN{alpha} suppresses CYP3A4 expression, caution is warranted when IFN{alpha} is administered in combination with CYP3A4 substrates to avoid the occurrence of adverse drug interactions.

60 APPLIED LIFE SCIENCES↗

White light generation from Dy{sup 3+}-doped ZnO-B{sub 2}O{sub 3}-P{sub 2}O{sub 5} glasses

Dysprosium doped ZnO-B{sub 2}O{sub 3}-P{sub 2}O{sub 5} (ZBP) glasses were prepared by a conventional melt quenching technique in order to study the luminescent properties and their utility for white light emitting diodes (LEDs). X-ray diffraction spectra revealed the amorphous nature of the glass sample. The present glasses were characterized by infrared and Raman spectra to evaluate the vibrational features of the samples. The emission and excitation spectra were reported for the ZBP glasses. Strong blue (484 nm) and yellow (574 nm) emission bands were observed upon various excitations. These two emissions correspond to the {sup 4}F{sub 9/2}->{sup 6}H{sub 15/2} and {sup 4}F{sub 9/2}->{sup 6}H{sub 13/2} transitions of Dy{sup 3+} ions, respectively. Combination of these blue and yellow bands gives white light to the naked eye. First time, it was found that ZnO-B{sub 2}O{sub 3}-P{sub 2}O{sub 5} glasses efficiently emit white light under 400 and 454 nm excitations, which are nearly match with the emissions of commercial GaN blue LEDs and InGaN LED, respectively. CIE chromaticity coordinates also calculated for Dy{sup 3+}: ZBP glasses to evaluate the white light emission.

36 MATERIALS SCIENCE↗

Calculation of electron-impact rotationally elastic total cross sections for NH{sub 3}, H{sub 2}S, and PH{sub 3} over the energy range from 0.01 eV to 2 keV

This paper report results of calculation of the total cross section Q{sub T} for electron impact on NH{sub 3}, H{sub 2}S, and PH{sub 3} over a wide range of incident energies from 0.01 eV to 2 keV. Total cross sections Q{sub T} (elastic plus electronic excitation) for incident energies below the ionization threshold of the target were calculated using the UK molecular R-matrix code through the Quantemol-N software package and cross sections at higher energies were derived using the spherical complex optical potential formalism. The two methods are found to give self-consistent values where they overlap. The present results are, in general, found to be in good agreement with previous experimental and theoretical results.

74 ATOMIC AND MOLECULAR PHYSICS↗

Physical Properties of Potassium Phosphate Glass Prepared by Sol Gel Method

Series of glasses based on Al{sub 2}O{sub 3}-K{sub 2}O-P{sub 2}O{sub 5} have successfully been made by sol gel method. The amorphous state has been confirmed by X-ray diffraction (XRD) while the actual composition has been determined using Energy Dispersive X-ray (EDX) analysis. The glass density is determined using Archimedes method while the Vickers Micro hardness Test has been used to measure the hardness. It is found that all the samples are amorphous in nature with their actual composition contained phosphate in the range of 40-53% mol. It is also observed that the glass density is about 2.4 gcm{sup -3} while the hardness is in the range of 40-100 Hv, depending on composition.

36 MATERIALS SCIENCE↗

Interaction Studies Between Crofer-22APU Alloy And P{sub 2}O{sub 5} Containing Barium Calcium Alumino-borosilicate (BCABS) Sealant Glass-Ceramics

We present the effect of P{sub 2}O{sub 5} addition on barium calcium aluminum borosilicate BCABS glasses of composition (mol %)35BaO-15CaO-5Al{sub 2}O{sub 3}-(37-x)SiO{sub 2}-8B{sub 2}O{sub 3}-xP{sub 2}O{sub 5}(0{<=}x{<=}5). The incorporation of P{sub 2}O{sub 5} increased network polymerization and crystallization tendency. However, addition of P{sub 2}O{sub 5} leads to the formation of Cr{sub 2}O{sub 3} at the interface, saturating it in the ions of the metal. This improves glass-to-metal bonding.

36 MATERIALS SCIENCE↗

MAS-NMR investigations of the crystallization behaviour of lithium aluminum silicate (LAS) glasses containing P{sub 2}O{sub 5} and TiO{sub 2} nucleants

Lithium aluminum silicate (LAS) glass of composition (mol%) 20.4Li{sub 2}O-4.0Al{sub 2}O{sub 3}-68.6SiO{sub 2}-3.0K{sub 2}O-2.6B{sub 2}O{sub 3}-0.5P{sub 2}O{sub 5}-0.9TiO{sub 2} was prepared by melt quenching. The glass was then nucleated and crystallized based on differential thermal analysis (DTA) data and was characterized by {sup 29}Si, {sup 31}P, {sup 11}B and {sup 27}Al MAS-NMR. XRD and {sup 29}Si NMR showed that lithium metasilicate (Li{sub 2}SiO{sub 3}) is the first phase to c form followed by cristobalite (SiO{sub 2}) and lithium disilicate (Li{sub 2}Si{sub 2}O{sub 5}). {sup 29}Si MAS-NMR revealed a change in the network structure already for the glasses nucleated at 550 {sup o}C. Since crystalline Li{sub 3}PO{sub 4}, as observed by {sup 31}P MAS-NMR, forms concurrently with the silicate phases, we conclude that crystalline Li{sub 3}PO{sub 4} does not act as a nucleating agent for lithium silicate phases. Moreover, {sup 31}P NMR indicates the formation of M-PO{sub 4} (M=B, Al or Ti) complexes. The presence of BO{sub 3} and BO{sub 4} structural units in all the glass/glass-ceramic samples is revealed through {sup 11}B MAS-NMR. B remains in the residual glass and the crystallization of silicate phases causes a reduction in the number of alkali ions available for charge compensation. As a result, the number of trigonally coordinated B (BO{sub 3}) increases at the expense of tetrahedrally coordinated B (BO{sub 4}). The {sup 27}Al MAS-NMR spectra indicate the presence of tetrahedrally coordinated Al species, which are only slightly perturbed by the crystallization. - Graphical abstract: {sup 11}B MAS-NMR spectra of LAS glass heat treated at different temperatures, showing the evolution of the residual glass matrix during the crystallization treatment. High-field (18.8 T) NMR enables us to record high resolution spectra, from which the glass network modifications could be related to the formation of intermediate lithium silicate crystalline phases.

36 MATERIALS SCIENCE↗

Synthesis and characterization of phosphates in molten systems Cs{sub 2}O-P{sub 2}O{sub 5}-CaO-M{sup III}{sub 2}O{sub 3} (M{sup III}-Al, Fe, Cr)

The crystallization of complex phosphates from the melts of Cs{sub 2}O-P{sub 2}O{sub 5}-CaO-M{sup III}{sub 2}O{sub 3} (M{sup III}-Al, Fe, Cr) systems have been investigated at fixed value Cs/P molar ratios equal to 0.7, 1.0 and 1.3 and Sa/P=0.2 and Ca/M{sup III}=1. The fields of crystallization of CsCaP{sub 3}O{sub 9}, {beta}-Ca{sub 2}P{sub 2}O{sub 7}, Cs{sub 2}CaP{sub 2}O{sub 7}, Cs{sub 3}CaFe(P{sub 2}O{sub 7}){sub 2}, Ca{sub 9}M{sup III}(PO{sub 4}){sub 7} (M{sup III}-Fe, Cr), Cs{sub 0.63}Ca{sub 9.63}Fe{sub 0.37}(PO{sub 4}){sub 7} and CsCa{sub 10}(PO{sub 4}){sub 7} were determined. Obtained phosphates were investigated using powder X-ray diffraction and FTIR spectroscopy. Novel whitlockite-related phases CsCa{sub 10}(PO{sub 4}){sub 7} and Cs{sub 0.63}Ca{sub 9.63}Fe{sub 0.37}(PO{sub 4}){sub 7} have been characterized by single crystal X-ray diffraction: space group R3c, a=10.5536(5) and 10.5221(4) A, c=37.2283(19) and 37.2405(17) A, respectively. -- Graphical Abstract: Structural relationships between {beta}-Ca{sub 3}(PO{sub 4}){sub 2} and synthesized compounds is shown in terms aliovalent substitution of calcium atoms, which residue on three-fold axis, by other metals in {beta}-Ca{sub 3}(PO{sub 4}){sub 2} framework. Display Omitted Research highlights: {yields} Phase formation in the melts of Cs{sub 2}O-P{sub 2}O{sub 5}-CaO-M{sup III}{sub 2}O{sub 3} (M{sup III}-Al, Fe, Cr) systems were determined. {yields} The composition and structure of the compounds depend on the nature of M{sup III} and initial ratio of Cs/P. {yields} Obtained compounds have been characterized by powder X-ray diffraction and FTIR spectroscopy. {yields} Crystal structures of CsCa{sub 10}(PO{sub 4}){sub 7} and Cs{sub 0.63}Ca{sub 9.63}Fe{sub 0.37}(PO{sub 4}){sub 7} were determined by single crystal XRD.

36 MATERIALS SCIENCE↗

Thermal Behavior and Structural Analysis of Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5}(LTP) System

This study focuses on the preparation of Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5}(LTP) by mechanical milling (MM) method at 600 rpm. The samples were milled for 40 hours using 5 mm size ball-mill. The samples underwent different heat treatment and its conductivity behavior was investigated. Thermal and structural analysis of the highest conducting LTP system was investigated by means of TGA-DSC, XRD, and laser particle sizer respectively. An increase in the crystallinity of the samples was observed with increase in sintering temperature. The particle sizes of the samples were also observed to increase with increase in crystallinity. The samples that underwent heat treatment exhibit higher conductivity values with a value of 5.59x10{sup -4} Scm{sup -1} at 800 deg. C.

36 MATERIALS SCIENCE↗

Structural investigation of Eu{sup 2+} emissions from alkaline earth zirconium phosphate

Eu{sup 2+} doped A{sub 0.5}Zr{sub 2}(PO{sub 4}){sub 3} (A=Ca, Sr, Ba) phosphors with the NASICON structure were synthesized by a co-precipitation method. Their photoluminescent and structural properties were investigated by photoluminescent spectroscopy and powder X-ray Rietveld analysis, which determined two sites for Eu{sup 2+} ions in the host structure, 3a and 3b. The Eu-O bond lengths were increased by changing alkaline earth ions from Ca to Ba, causing Eu{sup 2+} emission bands to shift from blue-green to blue. A correlation was observed between the peak wavelength positions and the Eu-O bond length. The photoluminescent properties are discussed in terms of crystal field strength and nephelauxetic effect, and a schematic diagram of Eu{sup 2+} emissions is proposed for the Eu{sup 2+} doped NASICON phosphor. - Graphical abstract: Eu{sup 2+} doped NASICON structured A{sub 0.5}Zr{sub 2}(PO{sub 4}){sub 3} (A=Ca, Sr, Ba) showed the blue and blue-green colored emissions attributed to 4f{sup 6}5d{sup 1}-4f{sup 7} transitions. The photoluminescent properties are discussed in terms of crystal field strength and nephelauxetic effect using powder X-ray Rietveld analysis.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis, crystal structure, and magnetic properties of a novel organo-templated iron(III) borophosphate: (C{sub 3}H{sub 12}N{sub 2})Fe{sup III} {sub 6}(H{sub 2}O){sub 4}[B{sub 4}P{sub 8}O{sub 32}(OH){sub 8}]

The organo-templated iron(III) borophosphate (C{sub 3}H{sub 12}N{sub 2})Fe{sup III} {sub 6}(H{sub 2}O){sub 4}[B{sub 4}P{sub 8}O{sub 32}(OH){sub 8}] was prepared under mild hydrothermal conditions (at 443 K) and the crystal structure was determined from single crystal X-ray data at 295 K (monoclinic, P2{sub 1}/c (No. 14), a=5.014(2) A, b=9.309(2) A, c=20.923(7) A, beta=110.29(2){sup o}, V=915.9(5) A{sup 3}, Z=2, R1=0.049, wR2=0.107 for all data, 2234 observed reflections with I>2sigma(I)). The title compound contains a complex inorganic framework of borophosphate trimers [BP{sub 2}O{sub 8}(OH){sub 2}]{sup 5-} together with FeO{sub 4}(OH)(H{sub 2}O)- and FeO{sub 4}(OH){sub 2}-octahedra forming channels with ten-membered ring apertures in which the diaminopropane cations are located. The magnetization measurements confirm the Fe(III)-state and show an antiferromagnetic ordering at T{sub N}{approx}14.0(1) K. - Graphical abstract: The complex inorganic open-framework of (C{sub 3}H{sub 12}N{sub 2})Fe{sup III} {sub 6}(H{sub 2}O){sub 4}[B{sub 4}P{sub 8}O{sub 32}(OH){sub 8}] consists of borophosphate trimers and iron(III) coordination octahedra arranged to form channels with ten-membered ring apertures in which the organic 1,3-diaminopropane cations are located.

36 MATERIALS SCIENCE↗