Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA EXPANSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Relativistic plasma expansion with Maxwell-Juettner distribution

A self-similar analytical solution is proposed to describe the relativistic ion acceleration with the local Maxwell-Juettner relativistic distribution electrons. It is an alternative to the existing static model [M. Passoni and M. Lontano, Phys. Rev. Lett. 101, 115001 (2008)], which exploits a limited solution for the acceleration potential. With our model, the potential is finite naturally and has an upper limitation proportional to the square root of the electron temperature. The divergent potential in the non-relativistic case is the linear items of the Taylor expansion of that obtained relativistic one here. The energy distribution of ions and the dependence of the ion momentum on the acceleration time are obtained analytically. Maximum ion energy has an upper limitation decided by the finite potential difference. In the ultra-relativistic region, the ion energy at the ion front is proportional to t{sup 4/5} and the energy of the ions behind the ion front is proportional to t{sup 2/3} since the field there is shielded by the ions beyond them and the field at the ion front is the most intense.

43 PARTICLE ACCELERATORS↗

Reducing wall plasma expansion with gold foam irradiated by laser

The experimental study on the expanding plasma movement of low-density gold foam (∼1% solid density) irradiated by a high power laser is reported in this paper. Experiments were conducted using the SG-III prototype laser. Compared to solid gold with 19.3 g/cc density, the velocities of X-ray emission fronts moving off the wall are much smaller for gold foam with 0.3 g/cc density. Theoretical analysis and MULTI 1D simulation results also show less plasma blow-off, and that the density contour movement velocities of gold foam are smaller than those of solid gold, agreeing with experimental results. These results indicate that foam walls have advantages in symmetry control and lowering plasma fill when used in ignition hohlraum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Off-harmonic optical probing of high intensity laser plasma expansion dynamics in solid density hydrogen jets

Due to the non-linear nature of relativistic laser induced plasma processes, the development of laser-plasma accelerators requires precise numerical modeling. Especially high intensity laser-solid interactions are sensitive to the temporal laser rising edge and the predictive capability of simulations suffers from incomplete information on the plasma state at the onset of the relativistic interaction. Experimental diagnostics utilizing ultra-fast optical backlighters can help to ease this challenge by providing temporally resolved inside into the plasma density evolution. We present the successful implementation of an off-harmonic optical probe laser setup to investigate the interaction of a high-intensity laser at 5.4 x 10 21 W/cm 2 peak intensity with a solid-density cylindrical cryogenic hydrogen jet target of 5μm diameter as a target test bed. The temporal synchronization of pump and probe laser, spectral filtering and spectrally resolved data of the parasitic plasma self-emission are discussed. The probing technique mitigates detector saturation by self-emission and allowed to record a temporal scan of shadowgraphy data revealing details of the target ionization and expansion dynamics that were so far not accessible for the given laser intensity. Plasma expansion speeds of up to (2.3 ± 0.4)x 10 7 m/s followed by full target transparency at 1.4ps after the high intensity laser peak are observed. A three dimensional particle-in-cell simulation initiated with the diagnosed target pre-expansion at -0.2ps and post processed by ray tracing simulations supports the experimental observations and demonstrates the capability of time resolved optical diagnostics to provide quantitative input and feedback to the numerical treatment within the time frame of the relativistic laser-plasma interaction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The role of radiative reabsorption on the electron energy distribution functions in H{sub 2}/He plasma expansion through a tapered nozzle

A collisional-radiative model for the H{sub 2}/He plasma, coupled to a Boltzmann solver for the free electron kinetics is used to investigate the non-equilibrium conditions created in the expansion of an high-temperature plasma flow through a converging-diverging nozzle, starting from the steady state composition at T{sub 0}=10 000 K and p{sub 0}=1 atm in the reservoir. It is shown that the plasma optical thickness plays a major role on the evolution of macroscopic quantities and internal distributions along the nozzle axis. Structured electron energy distribution functions, characterized by long plateaux and humps, are created due to superelastic collisions of cold electrons and electronically excited atomic hydrogen. The magnitudes of the plateaux are orders of magnitude higher in an optically thick plasma compared with a thin plasma, while the electron-electron collisions play a role in smoothing the peaks created by superelastic collisions between cold electrons and H(n>2)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma expansion and relativistic filamentation in intense laser-irradiated cone targets

We report that compound parabolic concentrator (CPC) cone targets have been shown to produce increased MeV photons on the NIF-ARC by 10× over flat targets. Multiple x-ray frames can potentially be generated by firing the NIF-ARC's beamlets into distinct cone targets at few nanosecond relative delays. This requires that the cone targets with delayed beams are not degraded by their proximity to previous targets. One concern is that the spatial wings of a beam fired into one target can fall on neighboring targets, producing a preformed plasma that may interfere with laser light reaching the tip of the cone. In this work, 3D hydra simulations of realistic targets and beam parameters show that hundreds of micrometer scale length preplasmas are produced in cones within 1 mm of the laser spot. 2D particle-in-cell simulations of the intense main pulse in this preplasma indicate a density threshold for the onset of relativistic filamentation in our conditions. Applying our modeling approach to a NIF-ARC shot with an intentional 15 J prepulse yields good agreement with experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Developing the model of laser ablation by considering the interplay between emission and expansion of aluminum plasma

In the present study, the ablation behavior of aluminum target and its plasma radiation in noble ambient gases by a laser pulse with wavelength of 266 nm and pulse duration of 10 ns are numerically studied. A thermal model of laser ablation considering heat conduction, Euler equations, Saha-Eggert equations, Knudsen layer, mass and energy balance relations and optical shielding effects are used for calculation of plasma parameters. Effects of excitation energy on plasma expansion and its emissivity are investigated. Time and spatial-resolved plasma emission including bremsstrahlung, recombination and spectral emission at early delay times after laser irradiation is obtained. Effects of two ambient gases (He and Ar) as well as different gas pressures of 100, 300, 500, and 760 Torr on plasma expansion and its spectrum are studied. Results illustrate that at initial delay times, especially at high noble gas pressures, ionic lines have the maximum intensities, while at later times neutral lines dominate. When the pressure of ambient gas increases, a confinement of the plasma plume is predicted and the intensity of neutral lines decreases. Continuous emission increases with wavelength in both ambient gases. Spatially resolved analysis shows that an intense continuous emission is predicted next to the sample surface decreasing with distance from the latter.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectral–Dynamic Model of the Hot Plasma Layer Expansion

We propose a theoretical model describing the expansion of a plasma layer into vacuum for an arbitrary electron plasma component temperature. Comparison with the known limiting cases of the quasi-neutral outflow and the Coulomb explosion, as well as with the results of the 1D electrostatic simulation, has revealed a high accuracy of the proposed model in the description of the spectral–energy and spatial characteristics of ions accelerated during the plasma expansion. The procedure for obtaining the relations between the characteristics of accelerated ions and the laser pulse and target parameters is described with regard to qualitative predictions and the description of the results of numerical kinetic simulation and experiments on the laser and plasma acceleration of ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of laser polarization in the expansion of plasma waveguides

We experimentally demonstrate that a column of hydrogen plasma generated by an ultra-short (sub-picosecond), moderate intensity (∼10{sup 15–16} W.cm{sup –2}) laser, radially expands at a higher velocity when using a circularly polarized laser beam instead of a linearly polarized beam. Interferometry shows that after 1 ns there is a clear shock structure formed, that can be approximated to a cylindrical blast wave. The shock velocity was measured for plasmas created with linearly and circularly polarized laser beams, indicating an approximately 20% higher velocity for plasmas generated with a circularly polarized laser beam, thus implying a higher plasma electron temperature. The heating mechanism was determined to be the Above Threshold Ionization effect. The calculated electrum energy spectrum for a circularly polarized laser beam was broader when compared to the one generated by a linearly polarized laser beam, leading to a higher plasma temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Self-generation of megagauss magnetic fields during the expansion of a plasma

The expansion of a plasma slab into a vacuum is studied using one-dimensional and two-dimensional particle-in-cell simulations. As electrons transfer their longitudinal kinetic energy to ions during the expansion, the electron temperature becomes anisotropic. Once this anisotropy exceeds a threshold value, it drives the Weibel instability, leading to magnetic fields in the megagauss range. These fields induce energy transfer between the longitudinal and transverses directions, which influences the expansion. The impact of a cold electron population on this phenomenon is also investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Large quasineutral electron velocity oscillations in radial expansion of an ionizing plasma

Radial expansion of an ionizing gas or plasma cylinder into vacuum is investigated. An exact model for the evolution of the density and velocity fields of the electrons, ions, and neutrals, including the effect of photo and electron-impact ionization on the flow characteristics is developed and solutions obtained. A quasineutral nonlinear electrostatic mode involving rapid oscillations in the electron velocity but not in the density can occur in the expanding plasma. The mode turns out to be almost unaffected by weak ionization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Single And Double Pulse Irradiation And Comparison With Experimental Results

A theoretical model of laser ablation has been previously developed and applied to Laser Induced Breakdown Spectroscopy (LIBS) analysis of bronzes with the aim to improve quantitative results and to focus on problems arising in the interpretation of experimental data. The model describes laser-solid matter interaction, plume expansion, plasma formation and laser-plasma interaction. A two temperature approach has been also introduced to take into account the initial temperature dynamics of the alloy surface upon ultra-short laser irradiation. We examined various target compositions, typical of archaeological artworks, and different laser characteristics such as wavelength (355 nm, 530 nm, 1064 nm) and pulse duration (8 ns, 250 fs). In this work, the model has been extended to simulate double pulse LIBS configuration in order to clarify the mechanism involved in the process and for better interpreting the experimental data. Plasma composition, relevant parameters (temperature, electron density) and their kinetic evolutions have been measured. Results have been compared with the simulation obtained using the same irradiation conditions and set of targets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Feasibility of characterizing laser-ablated carbon plasmas via planar laser induced fluorescence

Planar laser induced fluorescence (PLIF) imaging can potentially assess ion distributions and coupling in the context of super-Alfvenic ablation plasma expansions into magnetized background plasmas. In this feasibility study, we consider the application of PLIF to rapidly expanding carbon plasmas generated via energetic laser ablation of graphite. By utilizing hydrodynamic and collisional-radiative simulations, we identify schemes accessible to commercially available tunable lasers for the C I atom, the C II ion, and the C V ion. We then estimate the signal-to-noise ratios yielded by the schemes under reasonable experimental configurations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗