Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA FLUX MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Non-equilibrium ionization in Puppis A

High resolution X-ray spectroscopy of the brightest knot of emission in the Puppis A supernova remnant shows that it is made up of ionizing plasma, far from equilibrium. Flux measurements in several X-ray lines make it possible to determine the nonequilibrium conditions: electron temperature, ion populations, and time since the knot was heated by the supernova shock. Imaging and spectroscopic data from the Einstein Observatory together suggest that this knot is a cloud of density about 10 per cu cm which has recently been shocked to a temperature 7,000,000 K. Radio and optical data on the region appear consistent with this picture.

Winkler, P. F.↗
NASA NTRS1992

The effect of induced charges on low-energy particle trajectories near conducting and semiconducting plates

The effect of the induced charge was found on particles less than 1 eV as they passed through simulated parallel, grounded channels that are comparable in dimension to those that are presently in space plasma instruments which measure the flux of low-energy ions. Applications were made to both conducting and semiconducting channels that ranged in length from 0.1 to 50 mm and in aspect ratio from 1 to 100. The effect of the induced charge on particle trajectories from simple straight lines. Several configurations of channel aspect ratio and detector locations are considered. The effect is important only at very low energies with small dimensions.

Coffey, Victoria N.↗
NASA NTRS2004

Ion Flux Environments for Exposed Spacecraft Surfaces in Interplanetary Space

Spacecraft surfaces in interplanetary space are exposed to solar wind ions. The bulk of the ions exhibit energies of a few kilovolts and are important only to surface interactions while a fraction of the solar wind extends to greater energies and may penetrate below the material surface. The importance of including solar wind ions in analysis of space environment effects on spacecraft is becoming more important as new spacecraft designs are considered which include systems such as sunshades, solar sail propulsion systems, and other mission critical features based on very thin materials. This paper provides a status report on development of solar wind ion environments to support engineering analysis of materials exposed to the space environment including techniques for reconstructing ion environments from solar wind plasma moments and energetic flux measurements and comparison of statistical flux environments to integrated mission fluence.

Minow, Joseph I.↗
NASA NTRS1978

Anode power in quasisteady magnetoplasmadynamic accelerators

Anode heat flux in a quasi-steady MPD accelerator has been measured directly and locally by thermocouples attached to the inside surface of a shell anode. These measurements show that over a range of arc current from 5.5 to 44 kA, and argon mass flow from 1 to 48 g/s, the fraction of the total arc power deposited in the anode decreases from 50% at 200 kW to 10% at 20 MW. A theoretical model of the anode heat transfer asserts that energy exchange between electrons and heavy particles in the plasma near the anode occurs over distances greater than the anode sheath thickness, and hence the usual anode fall voltage, electron temperature, and work function contributions to the anode heat flux are supplemented by a contribution from the interelectrode potential. Calculations of anode heat flux using the measured current density, plasma potential, and electron temperature in the plasma adjacent to the anode agree with the direct measurements and indicate that the decrease in anode power fraction at higher arc powers can be attributed to the smaller mean free paths in the interelectrode plasma.

Saber, A. J.↗
NASA NTRS2002

Empty Flux Tubes and Plasmasphere Refilling as Seen by IMAGE

When a plasmaspheric flux tube is empty, what plasma is actually missing? When a flux tube refills, where does the plasma accumulate first? How long does it take to refill a flux tube to a level that is essentially saturated? Owing to the observational difficulties of measuring the distribution of plasmaspheric plasma along a flux tube, these questions have remained unanswered over many decades of study since discovery of the plasmasphere. They are important questions, because of the role that plasmaspheric plasma plays in collisional losses of higher energy populations, in modifying instabilities for wave-particle interactions, and in influencing the transport of energy through plasma waves. The Extreme Ultraviolet Imager and the Radio Plasma Imager on the IMAGE Mission are providing new, critical observations of the dynamic outer plasmasphere where convective erosion and refilling dominate. Latitudinal density profiles along a single L-shell from BPI confirm earlier indications of a mid-latitude transition between the altitude organized structure of the ionosphere and L-shell organized plasmasphere. Emptied flux tubes often mean empty only above about 1 Re in altitude or below plus or minus 40 degrees in magnetic latitude. Refilling to nearly saturated levels is found to take much less than that previously found necessary to complete the process. The observations behind these conclusions and the new light brought to plasmaspheric refilling will be discussed.

Adrian, M. L.↗
NASA NTRS2004

High Power Light Gas Helicon Plasma Source For VASMIR

The VASIMR space propulsion development effort relies on a high power (greater than 10kW) helicon source to produce a dense flowing plasma (H, D and He) target for ion cyclotron resonance (ICR) acceleration of the ions. Subsequent expansion in an expanding magnetic field (magnetic nozzle) converts ion lunetic energy to directed momentum. This plasma source must have critical features to enable an effective propulsion device. First, it must ionize most of the input neutral flux of gas, thus producing a plasma stream with a high degree of ionization for application of ICR power. This avoids propellant waste and potential power losses due to charge exchange. Next, the plasma stream must flow into a region of high magnetic field (approximately 0.5 T) for efficient ICR acceleration. Third, the ratio of input power to plasma flux must be low, providing an energy per ion-electron pair approaching 100 eV. Lastly, the source must be robust and capable of very long life-times (years). In our helicon experiment (VX-10) we have measured a ratio of input gas to plasma flux near 100%. The plasma flows from the helicon region (B approximately 0.1 T) into a region with a peak magnetic field of 0.8 T. The energy input per ion-electron pair has been measured at 300 plus or minus 100 eV. Recent results at Oak Ridge National Laboratory (ORNL) show an enhanced efficiency mode of operation with a high power density, over 5 kW in a 5 cm diameter tube. Our helicon is presently 9 cm in diameter and operates up to 3.5 kW of input power. An upgrade to a power level of 10 kW is underway. Much of our recent work has been with a Boswell double-saddle antenna design. We are also converting the antenna design to a helical type. With these modifications, we anticipate an improvement in the ionization efficiency. This paper presents the results from scaling the helicon in the VX-10 device from 3.5 to 10 kW. We also compare the operation with a double-saddle to a helical antenna design. Finally, we discuss modeling of these configurations using ORNL's EMIR code.

Squire, J. P.↗
NASA NTRS2012

Influence of Catalysis and Oxidation on Slug Calorimeter Measurements in Arc Jets

Arc jet tests play a critical role in the characterization and certification of thermal protection materials and systems (TPS). The results from these arc jet tests feed directly into computational models of material response and aerothermodynamics to predict the performance of the TPS in flight. Thus the precise knowledge of the plasma environment to which the test material is subjected, is invaluable. As one of the environmental parameters, the heat flux is commonly measured. The measured heat flux is used to determine the plasma enthalpy through analytical or computational models. At NASA Ames Research Center (ARC), slug calorimeters of a geometrically similar body to the test article are routinely used to determine the heat flux. A slug calorimeter is a thermal capacitance-type calorimeter that uses the temperature rise in a thermally insulated slug to determine the heat transfer rate, see Figure 1(left). Current best practices for measuring the heat flux with a slug calorimeter are described in ASTM E457 - 96. Both the calorimeter body and slug are made of Oxygen Free High Conductivity Copper, and are cleaned before each run.

Nawaz, Anuscheh↗
NASA NTRS1986

Further observations of Space Shuttle plasma-electrodynamic effects from OSS-1/STS-3

Recent analyses of ion measurements obtained from the Differential Ion Flux Probe (DIFP) on the deployed Plasma Diagnostics Package (PDP) during the OSS-1/STS-3 mission have provided an additional insight into the plasma-electrodynamics of the Space Shuttle Orbiter: (1) Measured ion flow directions and energies suggest that the disturbance created in the ionospheric plasma by the Shuttle Orbiter may be confined to an interaction region that extends on the order of 10 m in the forward direction and has a boundary thickness of about 2 m. (2) A correlation between the DIFP and pressure gauge measurements indicates a direct, local proportionality between the neutral gas and ion densities. (3) Preliminary results from a theoretical model of the possible interaction between measured secondary, high inclination ion streams and the ambient plasma indicate the generation of broad-band electrostatic noise such as that observed by wave instruments on the PDP.

Stone, N. H.↗
NASA NTRS1972

Subsatellite measurements of plasmas and solar particles

The experiment with the small scientific subsatellite which was launched into lunar orbit from Apollo 15 is described. The subsatellite was designed to measure plasma and energetic-particle fluxes, vector magnetic fields, and velocity of the subsatellite for determining lunar gravitational anomalies. The theory of particle-shadow formation by the moon solar wind electrons, and energetic-electron fluxes in interplanetary space are discussed along with an analysis of the initial data.

Anderson, K. A.↗
NASA NTRS1995

Electron energy transport in the solar wind: Ulysses observations

The electron heat flux in the solar wind has been measured by the Ulysses solar wind plasma experiment in the ecliptic from 1 to 5 AU and out of the ecliptic during the recently completed pass over the solar south pole and the ongoing pass over the solar north pole. Although the electron heat flux contains only a fraction of the kinetic energy of the solar wind. the available energy is sufficient to account for the non-adiabatic expansion of the solar wind electrons. The Ulysses measurements indicate that the electron heat flux is actively dissipated in the solar wind. The exact mechanism or mechanisms is unknown. but a model based on the whistler heat flux instability predicts radial gradients for the electron heat flux in good agreement with the data. We will present measurements of the correlation between wave activity measured by the unified radio and plasma experiment (URAP) and the electron heat flux throughout the Ulysses mission. The goal is to determine if whistler waves are a good candidate for the observed electron heat flux dissipation. The latitudinal gradients of the electron heat flux. wave activity. and electron pressure will be discussed in light of the changes in the magnetic field geometry from equator to poles.

Scime, Earl↗
NASA NTRS1966

Plasma probe

Mariner IV plasma probe to measure density, velocity distribution, and bulk direction of proton flux component of solar plasma - components, operation, and performance

MARINER IV SPACE PROBE↗
NASA NTRS1972

Subsatellite measurements of plasma and energetic particles

The Apollo 16 particles and fields subsatellite is instrumented to measure (1) plasma and energetic-particle fluxes, (2) vector magnetic fields, and (3) velocity of the subsatellite to a high precision for the purpose of determining lunar gravitational anomalies. Results from the magnetic-field and gravitational-field experiments are discussed. The results obtained from the plasma and energetic-particle detectors are discussed briefly. The plasma and energetic-particles experiment describes the various plasma regimes in which the moon moves, and determines how the moon interacts with the plasma and magnetic fields in the environment.

Anderson, K. A.↗
NASA NTRS1981

Winter nighttime ion temperatures and energetic electrons from OGO 6 plasma measurements

In the reported investigation, ion temperature and suprathermal electron flux data were acquired with the retarding potential analyzer on board the OGO 6 satellite when it was in solar eclipse. Attention is given to measurements in the 400- to 800-km height interval between midnight and predawn in the northern winter nonpolar ionosphere. Statistical analysis of data recorded during a 1 month time span permits a decoupling of horizontal and altitude effects. A distinct longitudinal variation is observed for ion temperature above 500 km, with a significant relative enhancement over the western North Atlantic. Altitude distributions of ion temperature are compatible with Millstone Hill profiles within the common region of this enhancement. Large fluxes of energetic electrons are observed and extend to much lower geomagnetic latitudes in the same longitude sector.

Sanatani, S.↗
NASA NTRS2013

Performance and Thermal Characterization of the NASA-300MS 20 kW Hall Effect Thruster

NASA's Space Technology Mission Directorate is sponsoring the development of a high fidelity 15 kW-class long-life high performance Hall thruster for candidate NASA technology demonstration missions. An essential element of the development process is demonstration that incorporation of magnetic shielding on a 20 kW-class Hall thruster will yield significant improvements in the throughput capability of the thruster without any significant reduction in thruster performance. As such, NASA Glenn Research Center and the Jet Propulsion Laboratory collaborated on modifying the NASA-300M 20 kW Hall thruster to improve its propellant throughput capability. JPL and NASA Glenn researchers performed plasma numerical simulations with JPL's Hall2De and a commercially available magnetic modeling code that indicated significant enhancement in the throughput capability of the NASA-300M can be attained by modifying the thruster's magnetic circuit. This led to modifying the NASA-300M magnetic topology to a magnetically shielded topology. This paper presents performance evaluation results of the two NASA-300M magnetically shielded thruster configurations, designated 300MS and 300MS-2. The 300MS and 300MS-2 were operated at power levels between 2.5 and 20 kW at discharge voltages between 200 and 700 V. Discharge channel deposition from back-sputtered facility wall flux, and plasma potential and electron temperature measurements made on the inner and outer discharge channel surfaces confirmed that magnetic shielding was achieved. Peak total thrust efficiency of 64% and total specific impulse of 3,050 sec were demonstrated with the 300MS-2 at 20 kW. Thermal characterization results indicate that the boron nitride discharge chamber walls temperatures are approximately 100 C lower for the 300MS when compared to the NASA- 300M at the same thruster operating discharge power.

High power↗
NASA NTRS2006

Representation of the Geosynchronous Plasma Environment in Spacecraft Charging Calculations

Historically, our ability to predict and postdict spacecraft surface charging has been limited by the characterization of the plasma environment. One difficulty lies in the common practice of fitting the plasma data to a Maxwellian or Double Maxwellian distribution function, which may not represent the data well for charging purposes. We use electron and ion flux spectra measured by the Los Alamos National Laboratory (LANL) Magnetospheric Plasma Analyzer (MPA) to examine how the use of different spectral representations of the charged particle environment in computations of spacecraft potentials during magnetospheric substorms affects the accuracy of the results. We calculate the spacecraft potential using both the measured fluxes and several different fits to these fluxes. These measured fluxes have been corrected for the difference between the measured and calculated potential. The potential computed using the measured fluxes and the best available material properties of graphite carbon, with a secondary electron escape fraction of 81%, is within a factor of three of the measured potential for 87% of the data. Potentials calculated using a Kappa function fit to the incident electron flux distribution function and a Maxwellian function fit to the incident ion flux distribution function agree with measured potentials nearly as well as do potentials calculated using the measured fluxes. Alternative spectral representations gave less accurate estimates of potential. The use of all the components of the net flux, along with spacecraft specific average material properties, gives a better estimate of the spacecraft potential than the high energy flux alone.

Davis, V. A.↗
NASA NTRS1985

Plasma measurements of the Pioneer Venus Orbiter in the Venus ionosheath - Evidence for plasma heating near the ionopause

A study of the angular spread of plasma fluxes detected in the Venus ionosheath is presented. It is shown that in the inner regions of the ionosheath, where the flux intensity is severely decreased with respect to solar wind values, the width of the azimuthal distribution of the local plasma is comparable to, or even larger than, that of the stronger fluxes measured in the outer ionospheath. The observed variation of the angular width suggests the existence of a source of heating near the ionopause but is not consistent with the overall cooling that would be expected if mass loading and charge exchange collisions were solely responsible for the interaction process at that boundary. Dissipative phenomene associated with local plasma turbulence processes seem to be required to account for the broad angular distributions seen near the ionopause.

Perez-De-tejada, H.↗