Search NASA⌕ Search

SEARCH · Search NASA

Results for “PN ranging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Silicon Carbide Diodes Characterization at High Temperature and Comparison With Silicon Devices

Commercially available silicon carbide (SiC) Schottky diodes from different manufacturers rated at 200, 300, 600, and 1200 V, were electrically tested and characterized as a function of temperature up to 300 C. Electrical tests included both steady state and dynamic tests. Steady state tests produced forward and reverse I-V characteristic curves. Transient tests evaluated the switching performance of the diodes in either a hard-switched DC to DC buck converter or a half-bridge boost converter. For evaluation and comparison purposes, the same tests were performed with current state-of-the-art ultra fast silicon (Si) pn-junction diodes of similar ratings and also a Si Schottky diode. The comparisons made were forward voltage drop at rated current, reverse current at rated voltage, and turn-off peak reverse recovery current and reverse recovery time. In addition, efficiency measurements were taken for the buck DC to DC converter using both the SiC Schottky diodes and the Si pn-junction diodes at different temperatures and frequencies. The test results showed that at high temperature, the forward voltage drop for SiC Schottky diodes is higher than the forward drop of the ultra fast Si pn-junction diodes. As the temperature increased, the forward voltage drop of the SiC Schottky increased while for the ultra fast Si pn-junction diodes, the forward voltage drop decreased as temperature increased. For the elevated temperature steady state reverse voltage tests, the SiC Schottky diodes showed low leakage current at their rated voltage. Likewise, for the transient tests, the SiC Schottky diodes displayed low reverse recovery currents over the range of temperatures tested. Conversely, the Si pn-junction diodes showed increasing peak reverse current values and reverse recovery times with increasing temperature. Efficiency measurements in the DC to DC buck converter showed the advantage of the SiC Schottky diodes over the ultra fast Si pn-junction diodes, especially at the higher temperatures and higher frequencies.

Lebron-Velilla, Ramon C.↗
NASA NTRS1973

Two carrier communication system with single transmitter

A pulse code modulated communication system is disclosed for transmitting two subcarrier modulated carriers from a single transmitter comprising two channels for phase modulating the two carriers independently. The modulating subcarriers are independently modulated by data and/or pseudonoise (PN) codes as desired. The modulated carriers are switched alternately to the single transmitter in synchronism with operation of a PN code generator when PN code modulation is present, as for ranging.

Easterling, M. F.↗
NASA NTRS1975

Shuttle communications design study

The design and development of a space shuttle communication system are discussed. The subjects considered include the following: (1) Ku-band satellite relay to shuttle, (2) phased arrays, (3) PN acquisition, (4) quadriplexing of direct link ranging and telemetry, (5) communications blackout on launch and reentry, (6) acquisition after blackout on reentry, (7) wideband communications interface with the Ku-Band rendezvous radar, (8) aeroflight capabilities of the space shuttle, (9) a triple multiplexing scheme equivalent to interplex, and (10) a study of staggered quadriphase for use on the space shuttle.

Cartier, D. E.↗
NASA NTRS1993

The planetary nebula system and dynamics of NGC 5128. I - Planetary nebulae as standard candles

We present the result of a planetary nebula (PN) survey of the nearby giant elliptical galaxy NGC 5128 performed with CCD cameras at the prime focus of the CTIO 4 m telescope. By comparing CCD images centered on the characteristic emission line forbidden O III 5007 A and on the adjacent continuum, we identify a total of 785 PNs in areas extending 20 kpc along the photometric major axis and covering the whole galaxy to 10 kpc. From these data, we form a complete sample of 224 PNs extending to a dereddened limiting magnitude of m5007 = 24.8, which extends 1.5 mag down the PN luminosity function (PNLF). Adopting a foreground extinction of E(B-V) = 0.1, we derive a distance to the galaxy of 3.5 +/- 0.2 Mpc, in excellent agreement with the surface brightness fluctuation method. No population effect on the bright cutoff of PNLF is observed in the isophotal radius range of 2-16 kpc, but the luminosity specific PN density seems to increase with radius inside of 7 kpc, in agreement with the alpha(2.5)-color relation observed for other galaxies.

Hui, Xiaohui↗
NASA NTRS1983

Planetary nebulae and stellar evolution

Newly defined characteristics of planetary nebulae (PN) derived from analysis of a photometric survey of 57 PN are reported. The data were combined with measurements of 27 other PN made since 1918 and were found to indicate core masses ranging from 0.55-1.0 solar mass. N/O elemental abundance ratios observed were correlated with the planetary nuclei masses, and were in direct proportion. IUE data on PN that overlapped a large part of the survey indicated that the PN in the galactic disk are more massive than PN in the halo. It is suggested that PN evolve into white dwarfs, a hypothesis supported by astrometric solutions for three nearby visual binaries featuring white dwarfs with well-determined masses. It is noted, however, that PN with masses exceeding one solar mass have been sighted in the Magellanic Clouds.

Maran, S. P.↗
NASA NTRS1975

Effects of processing on the carrier lifetime in silicon solar cells

Measurements were taken to determine the effects that solar cell processing steps have on the minority carrier lifetime in silicon. The experimental work included measurements of diffusion lengths of the silicon at various stages of cell fabrication, of solar cell properties, and of the PN junction properties for ingots covering a wide range of doping and other ingot properties. Resistivities covered the range of 0.01 to 10 ohm-cm, and combinations of extreme concentrations (high and low) of dislocations and oxygen were included. The results showed that the major cell process steps did not usually cause any appreciable change in diffusion lengths. The solar cell currents obtained supported the diffusion length measurements. The effects of heavy doping concentrations on solar cell performance were studied. Attempts were made to relate the voltage behavior of the cells with the diode properties and the properties of the ingots.

Iles, P. A.↗
NASA NTRS1977

Over-the-wing model thrust reverser noise tests

Static acoustic tests were conducted on a 1/12 scale model over-the-wing target type thrust reverser. The model configuration simulates a design that is applicable to the over-the-wing short-haul advanced technology engine. Aerodynamic screening tests of a variety of reverser designs identified configurations that satisfied a reverse thrust requirement of 35 percent of forward thrust at a nozzle pressure ratio of 1.29. The variations in the reverser configuration included, blocker door angle, blocker door lip angle and shape, and side skirt shape. Acoustic data are presented and compared for the various configurations. The model data scaled to a single full size engine show that peak free field perceived noise (PN) levels at a 152.4 meter sideline distance range from 98 to 104 PNdb.

Goodykoontz, J.↗
DOE OSTI2024

A Pn magnitude scale m b ( Pn ) for earthquakes along the equatorial Mid-Atlantic Ridge

We developed a short-period Pn magnitude scale m b (Pn) for earthquakes along the equatorial Mid-Atlantic Ridge. Due to low signal-to-noise ratios, teleseismic body wave magnitude and long-period surface wave magnitude cannot be confidently determined for small earthquakes of m b < 4. Local magnitude scales are also not useful for these events because the oceanic environment does not allow the propagation of crustal phases. However, regional high-frequency Pn waves from these small- to moderate-size (m b 3–6) earthquakes are well recorded in the equatorial Atlantic region and can be used to assign magnitudes. We measured over 2041 Pn peak amplitudes on vertical records from about 21 stations in northeastern Brazil and 11 stations in western Africa in the distance range of 700–3700 km. We analysed data from 189 events from the global centroid moment tensor catalogue to tie our m b (Pn) scale to M w so that seismic moments can be readily estimated. Pn arrivals show apparent group velocity between 7.9 km s –1 at short ranges (~1000 km) and up to 9.1 km s –1 at 3500 km. The measured peak amplitudes have a frequency between 0.8 and 3 Hz at 1000–1800 km, but at greater distances, 1800–3700 km, they show a remarkably consistent frequency of about 0.8 Hz. The peak amplitude attenuates at a higher rate at short distances (~0.65 magnitude units between 700 and 2000 km) but attenuates at a lower rate at long distances (~0.35 magnitude units between 2000 and 3700 km). The low rate of amplitude decay with distance and nearly constant frequency content of the peak amplitudes suggest that Pn waves propagate efficiently in the lower part of the upper mantle in the equatorial Atlantic Ocean basins. Furthermore, these are important attributes of oceanic Pn waves that can be used to assign magnitude for small- to moderate-size earthquakes in the equatorial mid-Atlantic region. The estimated station corrections correlate well with upper mantle low-velocity anomalies, especially in Brazil.

58 GEOSCIENCES↗
DOE OSTI2024

Magnetic structure and properties of the compositionally complex perovskite (Y 0.2 La 0.2 Pr 0.2 Nd 0.2 Tb 0.2 )MnO 3

Large configurational disorder in compositionally complex ceramics can lead to unique functional properties that deviate from traditional rules of alloy mixing. In recent years, compositionally complex oxides (CCOs) have shown intriguing magnetic behavior including long-range order, enhanced magnetic exchange couplings, and mixed phase magnetic structures. This work focuses on how large local spin disorder affects magnetic ordering in a CCO. Specifically, we investigated the A-site alloyed perovskite, (Y 0.2 La 0.2 Pr 0.2 Nd 0.2 Tb 0.2 )MnO 3 , or (5A)MnO 3 , using a combination of bulk magnetometry, synchrotron X-ray diffraction, and temperature-dependent neutron diffraction. The five A-site ions have an average spin and ionic radius nearly equal to that of Nd 3+ ions, which minimizes structural distortions and allows for an understanding of the local spin disorder effects through a direct comparison with NdMnO 3 . Our magnetometry data show that (5A)MnO 3 exhibits two distinct phase transitions associated with the A-site and B-site sublattices, as seen in NdMnO 3 , as well as the presence of domain pinning and exchange bias at low temperature, suggesting a mixed phase magnetic ground state, as seen in other magnetic CCOs. Neutron powder diffraction shows clear long-range antiferromagnetic ordering below 67 K and refines to a Pn'ma' magnetic structure at low temperature, in excellent agreement with the well-studied behavior of NdMnO 3 . The two most notable differences in (5A)MnO 3 magnetism apparent from our data are a slight suppression of the B-site ordering temperature, which is explained by a smaller Mn–O–Mn bond angle in (5A)MnO 3 than NdMnO 3 , and the presence of a magnetic susceptibility transition above the B-site ordering, which could indicate the formation of a cluster glass but requires further study. Finally, this work demonstrates a general method of isolated investigation of size and spin disorder in CCOs and motivates future work using local structure probes to better understand the effects of nanoscale clustering and local spin disorder in magnetic CCOs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2020

Proposed Recommendation for DDOR PN Spread Spectrum Systems

Currently, instrumental phase dispersion is a large error term in the Delta-Differential One-way Ranging (DDOR) error budget. This error arises from the spectral difference between the narrowband spacecraft signal and the broadband quasar signal. This error term can be reduced in modern transponders by implementing a pseudo-noise (PN) spread spectrum DOR signal instead of the classic sinusoidal DOR signal. To standardize PN DDOR cross-support, this paper proposes the definitions and specifications required to support a PN DDOR system. The motivation for PN DDOR is first presented. Then, informational background is presented on code selection, pulse shaping, and code parameters. Finally, Appendix A presents a new proposed Recommendation 2.5.7B for Spread Spectrum DDOR, to be included in CCSDS 401.

Volk, Christopher P↗
DOE OSTI2021

Quantized electronic transitions in electrodeposited copper indium selenide nanocrystalline homojunctions

Pairing semiconductors with electrochemical processing offers an untapped opportunity to create novel nanostructures for practical devices. Here we report the results of one such pairing: the in-situ formation of highly-doped, interface-matched, sharp nanocrystalline homojunctions (NHJs) with single step electrodeposition of two copper-indium-selenide (CISe) compounds on flexible foil. It produces a homogenous film, comprising inherently ordered, 3-dimensional interconnected network of pn -CISe NHJs. These CISe NHJs exhibit surprising non-linear emissions, quantized transitions, large carrier mobility, low trap-state-density, long carrier lifetime and possible up-conversion. They facilitate efficient separation of minority carriers, reduce recombination and essentially function like quantum materials. This approach mitigates the material issues and complex fabrication of incumbent nanoscale heterojunctions; it also overcomes the flexibility and scale-up challenges of conventional planar pn junctions. The self-stabilized CISe NHJ film can be roll-to-roll processed in ambient atmosphere, thus providing a promising platform for a range of optoelectronic technologies. This concept exemplified by CISe compounds can be adapted to create nano-scale pn junctions with other inorganic semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Base-Free Catalytic Transfer Hydrogenation of Alkyl Formates and Organic Esters at Mild Temperature

The pincer-ligated ruthenium complex ( iPr PN H P)Ru(CO)H 2 ( iPr PN H P = ( i Pr 2 PC 2 H 4 ) 2 NH) is an active catalyst for the transfer hydrogenation of alkyl formates (HCO 2 R) and organic esters (RCO 2 R′) to the corresponding alcohols under base-free reaction conditions at mild temperatures. Specifically, a range of alkyl formate esters were reduced to MeOH and the corresponding alcohols in high yields using ( iPr PN H P)Ru(CO)H 2 as the catalyst and isopropanol ( i PrOH) as the hydrogen donor at 30 °C. The first step in the process is the metal-catalyzed transesterification of the alkyl formate with i PrOH to generate isopropyl formate, which is then reduced. The use of i PrOH as the hydrogen donor is crucial. ( iPr PN H P)Ru(CO)H 2 can also catalyze the transfer hydrogenation of a broad range of organic esters, including cyclic, acyclic, heteroatom-substituted, and long-chain bio-derived esters, to the corresponding alcohols in good yields using ethanol (EtOH) as the hydrogen donor at 55 °C. Computational studies were used to elucidate the proposed pathway for alkyl formate reduction and the underlying reasons why i PrOH is the most effective hydrogen donor for alkyl formate reduction, while EtOH is optimal for organic ester reduction. Overall, this work describes a highly active catalyst for alkyl formate and organic ester transfer hydrogenation and provides mechanistic insight into the factors responsible for the strong catalytic performance. Finally, these findings will be valuable for designing catalysts for both transfer hydrogenation and related reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Exploring transport mechanisms in atomic precision advanced manufacturing enabled pn junctions

We investigate the different transport mechanisms that can occur in pn junction devices made using atomic precision advanced manufacturing at temperatures ranging from cryogenic to room temperature. We first elucidate the potential cause of the anomalous behavior observed in the forward-bias response of these devices in recent cryogenic temperature measurements, which deviates from the theoretical response of a silicon Esaki diode. These anomalous behaviors include current suppression at low voltages in the forward-bias response and a much lower valley voltage at cryogenic temperatures than theoretically expected for a silicon diode. To investigate the potential causes of these anomalies, we studied the effects of a few possible transport mechanisms, including band-to-band tunneling, bandgap narrowing, potential impact of non-Ohmic contacts, band quantization, impact of leakage, and inelastic trap-assisted tunneling, through semi-classical simulations. We find that a combination of two sets of band-to-band tunneling (BTBT) parameters can qualitatively approximate the shape of the tunneling current at low bias. This can arise from band quantization and realignment due to the strong potential confinement in δ-layers. We also find that the lower-than-theoretically-expected valley voltage can be attributed to modifications in the electronic band structure within the δ-layer regions, leading to a significant bandgap narrowing induced by the high density of dopants. Finally, we extend our analyses to room temperature operation and predict that trap-assisted tunneling (TAT) facilitated by phonon interactions may become significant, leading to a complex superposition of BTBT and TAT transport mechanisms in the electrical measurements.

band gap↗
NASA NTRS1985

PN velocity beneath Western New Mexico and Eastern Arizona

The experiment involved observing Pn arrivals on an areal array of 7 seismic stations located in the transition zone and along the Jemez lineament. Explosions in coal and copper mines in New Mexico and Arizona were used as energy sources as well as military detonations at White Sands Missile Range, New Mexico, Yuma, Arizona, and the Nevada Test Site. Very preliminary results suggest a Pn velocity of 7.94 km/s (with a fairly large uncertainty) beneath the study area. The Pn delay times, which can be converted to estimates of crustal thickness given knowledge of the velocity structure of the crust increase both to the north and east of Springerville, Arizona. As a constraint on the velocity of Pn, researchers analyzed the reversed refraction line GNOME-HARDHAT which passes through Springerville oriented NW to SE. This analysis resulted in a Pn velocity of 7.9-8.0 km/s for the transition zone. These preliminary results suggest that a normal Pn velocity might persist even though the crust thins (from north to south) by 15 km along the length of the Arizona-New Mexico border. If the upper mantle is currently hot anywhere in western New Mexico or eastern Arizona then the dimensions of the heat source (or sources) might be small compared to the intra-station distances of the seismic arrays used to estimate the velocity of Pn.

Jaksha, L. H.↗
NASA NTRS2011

Time delay and distance measurement

A method for measuring time delay and distance may include providing an electromagnetic radiation carrier frequency and modulating one or more of amplitude, phase, frequency, polarization, and pointing angle of the carrier frequency with a return to zero (RZ) pseudo random noise (PN) code. The RZ PN code may have a constant bit period and a pulse duration that is less than the bit period. A receiver may detect the electromagnetic radiation and calculate the scattering profile versus time (or range) by computing a cross correlation function between the recorded received signal and a three-state RZ PN code kernel in the receiver. The method also may be used for pulse delay time (i.e., PPM) communications.

Abshire, James B.↗
DOE OSTI2024

Cross-sections for 43 Sc, 44 m Sc, and 44 g Sc from two heavy ion reactions

Two different heavy ion reactions were used to produce 43 Sc (t$_{\frac12}$ = 3.891 h), 44g Sc (t$_{\frac12}$ = 4.042 h), and 44m Sc (t$_{\frac12}$ = 58.61 h) among other stable or long-lived chemically separable products. Production cross sections for 19 F + 27 Al and the reverse kinematic reaction 35 Cl + nat B were measured using an MC-SNICS ion source and the Notre Dame FN Tandem Accelerator. 19 F beams from 35 to 60 MeV were produced with beam currents between 40–80 pnA and 35 Cl beams were produced at six entrance energies with comparable beam currents. This work reports nuclear reaction cross sections 27 Al ( 19 F, x) 43 Sc, 27 Al ( 19 F, pn) 44g Sc, and 27 Al ( 19 F, pn) 44m Sc at six energies between 35 and 60 MeV lab energy. Cross sections within the same energy range were measured for 27 Al ( 19 F, 3pn) 42 K and 27 Al ( 19 F, 3p) 43 K. Comparative measurements were performed for the same compound nucleus produced from nat B( 35 Cl, x) 43 Sc, nat B( 35 Cl, pn) 44g Sc, and nat B( 35 Cl, pn) 44m Sc. The measured thin target cross sections show an overestimation by several statistical models for the scandium radioisotopes. This is corroborated by the measured thick target production rates for both entrance channels. This may be due to angular momentum effects of a heavy ion entrance channel compared to light-ion production, but additional work is required to understand this discrepancy. Finally, these measurements demonstrate that the medically useful 43 Sc, 44g Sc, and 44m Sc radioisotopes can be free of the long-lived contaminant 46 Sc without the use of enriched targets, using heavy ion beams and robust target materials.

07 ISOTOPE AND RADIATION SOURCES↗
NASA NTRS2003

Toward the Development of Group III-V Photodetectors and Imaging Arrays

A collaboration between researchers at NASA Goddard Space Flight Center (GSFC) (Code 718.1) and the Johns Hopkins University Applied Physics Laboratory (APL) on the development of gallium nitride (GaN) based photodetectors has been in existence since July 1994. This collaboration, based on APL undertaking the material growth and GSFC undertaking the device processing, has led to discrete GaN photoconductive detectors with superior characteristics to those of similar devices reported in the literature and, more recently, to the development of state-of-the art 256x256 imaging arrays with the pixels indium bump-bonded to a silicon readout circuit (RIOC). The object of this proposal is to continue the collaboration for the period 1998-2002 by outlining a program of work at the APL on the metalorganic chemical vapor deposition (MOCVD) growth of GaN and related materials for UV detector applications. In particular, emphasis will be placed on the optimization of growth on 2 in diameter substrates, on the growth of In(sub x)Ga(1-x)N and Al(sub x)Ga(1-x)N alloy structures to produce devices with a wider range of tailored cut-off wavelengths, and on the growth of pn-junction structures for photovoltaic devices.

Wickenden, Dennis K.↗
NASA NTRS2022

Differential Ranging Experiments with NASA’s High-Gain Deep Space Network Antennas

Radar experiments are currently under way at the Goldstone Deep Space Communications Complex (GDSCC) to determine the range of cis-lunar objects using a single high-gain 34m antenna transmitting 20 kW at X-band wavelengths, and two 34m receivers located at the GDSCC. The 34m antennas of the Deep Space Network (DSN) have effective fields-of-view of approximately 1 milli-radians, hence predetermined pointing predicts with accuracies on the order of 1 milli-degree are required. The extremely accurate 1 nano-second timing distribution of the DSN network enables sub-meter level ranging in the radial direction, by measuring delays in phase-modulated pseudonoise (PN) echoes reflected from the target. In this paper we demonstrate experimental verification of the proposed techniques by post-processing radar reflections obtained from a decommissioned geo-synchronous satellite. The characteristics of correlation-based delay measurements obtained simultaneously with two different receiving antennas are described. These are the fundamental quantities used to form the “time difference of arrival” (TDOA) observables commonly used in GPS positioning algorithms, and the results interpreted in the context of hyperbolic position location that could be used in the future to monitor spacecraft in cis-lunar space.

Cheung, Kar-Ming↗