SEARCH · Search NASA

Results for “POISEUILLE FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Connecting particle interactions to agglomerate morphology and rheology of boehmite nanocrystal suspensions

Rheology imposes significant challenges on processing of complex suspensions such as nuclear waste slurries at the Hanford and Savannah River sites. Understanding rheology connecting to microstructures and underlying particle interactions in complex slurries is therefore important for both fundamental knowledge and practical applications. Here, we use suspensions of aluminum oxyhydroxide minerals in the form of boehmite as an analog of the radioactive waste slurry to gain physical insights on the correlation between particle interactions, microstructures, and slurry rheology. Specifically, we use a combination of Couette rheometry and small-angle scattering techniques (independently and simultaneously) to understand how the slurry microstructure changes under flow and how these structural changes manifest themselves in the bulk rheology of the suspensions. Our experiments show that the boehmite slurries are thixotropic, with the rheology and structure of the suspensions changing with increasing exposure to flow. In the slurries, particle aggregates begin as loose, system-spanning clusters, but exposure to moderate shear rates causes the aggregates to irreversibly consolidate into denser clusters of finite size. The microstructural changes directly influence the rheological properties of the slurries such as viscosity and viscoelasticity. More importantly, our study shows that solution pH affects the amount of structural rearrangement and the kinetics of the rearrangement process, with an increase in pH leading to faster and more dramatic changes in the bulk rheology. Such dynamic microstructural changes and resultant rheology are understood via correlations between particle interactions and strength of particle network, coupled with surface chemistry and anisotropic nature of particle interactions. Nearly identical structural changes are also observed in Poiseuille flow geometries, implying that the observed changes are relevant in the pipe flow conditions present during waste processing.

Weston, Javen S.↗

DOE OSTI2025

Liquid crystal torons in Poiseuille-like flows

Three-dimensional (3D) simulations of the structure of liquid crystal (LC) torons, topologically protected distortions of the LC director field, under material flows are rare but essential in microfluidic applications. Here, we show that torons adopt a steady-state configuration at low flow velocity before disintegrating at higher velocities, in line with experimental results. Furthermore, we show that under partial slip conditions at the boundaries, the flow induces a reversible elongation of the torons, also consistent with the experimental observations. These results are in contrast with previous simulation results for 2D skyrmions under similar flow conditions, highlighting the need for a 3D description of this LC soliton in relation to its coupling to the material flow. These findings pave the way for future studies of other topological solitons, like hopfions and heliknotons, in flowing soft matter systems.

Science & Technology - Other Topics↗

NASA NTRS1974

Nonlinear cellular motions in Poiseuille channel flow

In a number of nonlinear solutions to the equations of channel flow the velocity is decomposed into a mean part plus a nonlinear disturbance. The idea that nonlinear effects place a limitation on the amplitudes of the disturbance flow is considered. In the reported investigation the disturbance flow is represented by drastically limited Fourier expansions in the downstream coordinate. The resulting equations are solved numerically with high accuracy to obtain a good representation of the cross-stream structure of the solution. The results of the investigation show that indeed the nonlinear terms always limit the amplitude of the disturbance flow in this approximation.

Zahn, J.-P.↗

NASA NTRS2014

Direct Numerical Simulation and Theories of Wall Turbulence with a Range of Pressure Gradients

A new Direct Numerical Simulation (DNS) of Couette-Poiseuille flow at a higher Reynolds number is presented and compared with DNS of other wall-bounded flows. It is analyzed in terms of testing semi-theoretical proposals for universal behavior of the velocity, mixing length, or eddy viscosity in pressure gradients, and in terms of assessing the accuracy of two turbulence models. These models are used in two modes, the traditional one with only a dependence on the wall-normal coordinate y, and a newer one in which a lateral dependence on z is added. For pure Couette flow and the Couette-Poiseuille case considered here, this z-dependence allows some models to generate steady streamwise vortices, which generally improves the agreement with DNS and experiment. On the other hand, it complicates the comparison between DNS and models.

Coleman, G. N.↗

NASA NTRS1988

Ion-wind effects on Poiseuille and Blasius flow

In order to study the effects of ion wind on the plane Poiseuille flow in a channel and Blasius flow on a flat plate, the equations of electrogasdynamics are solved numerically under the assumptions that the flow is incompressible, that the electric field is steady, and that the fluid velocity is negligible compared to ion drift velocity. The results show that ion wind strongly affects the skin-friction distribution for these flows.

Van Rosendale, J. R.↗

DOE OSTI2024

Flow resistance of phloem sieve plates revisited using an experimental model

Sieve plate resistance has been identified as the key to understanding the efficiency of phloem transport of carbohydrates in trees. These plates with small holes connecting sieve tubes are responsible for the largest resistance to flow in the phloem. Their structure determines how fast sugars can be transported through the phloem with certain pressure differences and what the limits for phloem transport in different plants are. Because experiments with the phloem are very challenging, our understanding of sieve plate resistance is mostly based on anatomical studies and hydrodynamic modeling of flow through sieve plates. These models calculate the resistance of the entire sieve tube–sieve plate system using the Hagen–Poiseuille flow resistance for the sieve cell lumen and a combination of the Hagen–Poiseuille resistance and Sampson flow resistance through the sieve pores. The resistance of the entire sieve plate is calculated by summing the Hagen–Poiseuille and Sampson flow resistances of each pore. To test the validity of this model formulation, an experimental model with aspect parameters similar to phloem sieve tubes was built using polyvinyl chloride (PVC) piping and plastic straws of different diameters and lengths. This system was used to measure flow rates and calculate flow resistance at Reynolds numbers 0.5–300. The results suggest that the current models may significantly overestimate the flow resistance caused by sieve plates and that the resistance might be better described by formulations used for perforated plates.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Non-equilibrium molecular dynamics simulation to evaluate the effect of confinement on fluid flow in silica nanopores

The flow of fluids in nano-confinement has applications in separations, water purification, medical systems and in the recovery of fluids in petroleum systems. It is believed that fluids do not obey continuum laws when flowing in nanopores (or in confinement). This paper attempts to shed light on various nano confinement effects such as fluid-wall interactions, pore size and molecular geometry, using molecular dynamic simulation. Here, water, hexane, and methanol flow behaviors were simulated for pore diameters ranging from 1 to 8 nm. In addition to the density analysis of the confined fluids, the fluid flows in saturated nanopores were simulated by the sectional flow method. Water and methanol molecules were completely stabilized in the 1 nm pore. Hexane molecules could not enter the 1 nm pore, due to geometric considerations. For the 2 – 8 nm pores, all fluids showed reduced flow rate compared to the Hagen–Poiseuille flow, due to an interfacial molecular layer stabilized at the pore surface. Flow reduction observed in these studies is contrary to significant flow enhancements observed for fluid flow in carbon nanotubes of similar dimensions. Water flow showed almost constant stick length for all the pore sizes. Methanol flow had the largest stick length. Hexane flow was reduced because of overcrowding of molecules at the pore surface. The effect of confinement diminished with an increase in pore diameter.

42 ENGINEERING↗

NASA NTRS1985

Viscous flows in rotating pipes with internal cavities and related vortex breakdowns

The problem of predicting vortex breakdown, which is characterized by a drastic change in core size and trajectory, is still basically unsolved. In the present paper, viscous flow in a long rotating pipe is analyzed, as a model for the type of breakdown observed in wake vortices. The full Navier-Stokes equations are shown to simplify to a set of unlinked partial differential equations. These equations allow for two separate solutions, for both full pipe flows (the classic rotating Hagen-Poiseuille flow) and cavity flows, in which a central area, with no net mass flux or viscous dissipation, is produced. Conditions permitting switching from one type of flow to the other, with no change in the mass flux or velocities at the pipe surface, are found. It is then argued that these conditions indicate when vortex breakdown will occur.

Weihs, D.↗

NASA NTRS1985

The effects of compliant walls on transition and turbulence

Two theoretical approaches to the phenomenon of drag reduction by a compliant wall are proposed. One is to study the limit cycle oscillations of the Navier-Stokes equations for a boundary layer flow over a compliant wall or a Poiseuille flow in a channel with a compliant wall. The other is a complementary study of a simpler, sequential model, which partially decouples the fluid and wall motions. In this approach, a 'Total Model' is constructed from suitable component models. While the first study is more rigorously based, it will be initially limited, by computational constraints, to relatively low Reynolds numbers. The second, more approximate approach, will allow consideration of a fully developed turbulent flow. The Total Model will predict the compliant wall motion accurately, but will not per se be sufficient to predict the skin friction drag. However, once the wall motion is known, the skin friction drag and the pressure drag can be computed separately, using one of the existing models.

Dowell, E. H.↗

NASA NTRS1980

Subcritical transition to turbulence in plane channel flows

A linear three dimensional mechanism for the transition of plane Poiseuille flows to turbulence is presented which provides good agreement with experimental observations. The mechanism is based on the evolution of states within a band of quasi-equilibria which slowly approach the stable upper branch solutions for the evolution of flow energy but which are strongly unstable to infinitesimal three-dimensional disturbances. Numerical simulation has shown that if two-dimensional flow persists long enough for the three-dimensional perturbations to attain finite amplitude, the resulting three dimensional flow quickly develops a turbulent character with nonperiodic behavior, and thus transition can be predicted from knowledge of the initial two- and three-dimensional energies and time scales. The mechanism predicts transition to turbulence at Reynolds numbers greater than 1000, as observed in experiments, and implies higher threshold three-dimensional energies in plane Couette flow.

Orszag, S. A.↗

DOE OSTI2021

Modeling and simulation of vascular tumors embedded in evolving capillary networks

Here in this work, we present a coupled 3D–1D model of solid tumor growth within a dynamically changing vascular network to facilitate realistic simulations of angiogenesis. Additionally, the model includes erosion of the extracellular matrix, interstitial flow, and coupled flow in blood vessels and tissue. We employ continuum mixture theory with stochastic Cahn–Hilliard type phase-field models of tumor growth. The interstitial flow is governed by a mesoscale version of Darcy’s law. The flow in the blood vessels is controlled by Poiseuille flow, and Starling’s law is applied to model the mass transfer in and out of blood vessels. The evolution of the network of blood vessels is orchestrated by the concentration of the tumor angiogenesis factors (TAFs); blood vessels grow towards the increasing TAFs concentrations. This process is not deterministic, allowing random growth of blood vessels and, therefore, due to the coupling of nutrients in tissue and vessels, makes the growth of tumors stochastic. We demonstrate the performance of the model by applying it to a variety of scenarios. Numerical experiments illustrate the flexibility of the model and its ability to generate satellite tumors. Simulations of the effects of angiogenesis on tumor growth are presented as well as sample-independent features of cancer.

3D–1D coupled blood flow models↗

DOE OSTI2023

Transition to turbulence in viscoelastic channel flow of dilute polymer solutions

The transition to turbulence in a plane Poiseuille flow of dilute polymer solutions is studied by direct numerical simulations of a finitely extensible nonlinear elastic fluid with the Peterlin closure. The range of Reynolds number ($Re$)$2000 \le Re \le 5000$is studied but with the same level of elasticity in viscoelastic flows. The evolution of a finite-amplitude perturbation and its effects on the transition dynamics are investigated. A viscoelastic flow begins transition at an earlier time than its Newtonian counterparts, but the transition time appears to be insensitive to polymer concentration in the dilute and semi-dilute regimes studied. Increasing polymer concentration, however, decreases the maximum attainable energy growth during the transition process. The critical or minimum perturbation amplitude required to trigger transition is computed. Interestingly, both Newtonian and viscoelastic flows follow almost the same power-law scaling of$Re^\gamma$with the critical exponent$\gamma \approx -1.25$, which is in close agreement with previous studies. However, a shift downward is observed for viscoelastic flow, suggesting that smaller perturbation amplitudes are required for the transition. A mechanism of the early transition is investigated by the evolution of wall-normal and spanwise velocity fluctuations and flow structure. The early growth of these fluctuations and the formation of quasi-streamwise vortices around low-speed streaks are promoted by polymers, hence causing an early transition. These vortical structures are found to support the critical exponent$\gamma \approx -1.25$. Once the transition process is completed, polymers play a role in dampening the wall-normal and spanwise velocity fluctuations and vortices to attain a drag-reduced state in viscoelastic turbulent flows.

Mechanics↗

DOE OSTI2023

A universal velocity transformation for boundary layers with pressure gradients

The logarithmic law of the wall does not capture the mean flow when a boundary layer is subjected to a strong pressure gradient. In such a boundary layer, the mean flow is affected by the spatio-temporal history of the imposed pressure gradient; and accounting for history effects remains a challenge. This work aims to develop a universal mean flow scaling for boundary layers subjected to arbitrary adverse or/and favourable pressure gradients. Here, we derive from the Navier–Stokes equation a velocity transformation that accounts for the history effects and maps the mean flow to the canonical law of the wall. The transformation is tested against channel flows with a suddenly imposed adverse or favourable pressure gradient, boundary layer flows subjected to an adverse pressure gradient, and Couette–Poiseuille flows with a streamwise pressure gradient. It is found that the transformed velocity profiles follow closely the equilibrium law of the wall.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1987

Torsion effect on fully developed flow in a helical pipe

Two techniques, a series expansion method of perturbed Poiseuille flow valid for low Dean numbers and a solution of the complete Navier-Stokes equation applicable to intermediate Dean values, are used to investigate the torsion effect on the fully developed laminar flow in a helical pipe of constant circular cross section. For the secondary flow patterns, the results show that the presence of torsion can produce a significant effect if the ratio of the curvature to the torsion is of order unity. The secondary flow is distorted in these cases. It is noted that the torsion effect is, however, usually small, and that the secondary flow has the usual pattern of a pair of counter-rotating vortices of nearly equal strength.

Kao, Hsiao C.↗

NASA NTRS1984

Effect of mild atherosclerosis on flow resistance in a coronary artery casting of man

An in-vitro flow study was conducted in a mildly atherosclerotic main coronary artery casting of man using sugar-water solutions simulating blood viscosity. Steady flow results indicated substantial increases in pressure drop, and thus flow resistance at the same Reynolds number, above those for Poiseuille flow by 30 to 100 percent in the physiological Reynolds number range from about 100 to 400. Time-averaged pulsatile flow data showed additional 5 percent increases in flow resistance above the steady flow results. Both pulsatile and steady flow data from the casting were found to be nearly equal to those from a straight, axisymmetric model of the casting up to a Reynolds number of about 200, above which the flow resistance of the casting became gradually larger than the corresponding values from the axisymmetric model.

Back, L. H.↗

NASA NTRS1990

Numerical simulation of spatially-evolving instability control in plane channel flow

The applicability of active control by periodic suction-blowing in spatially evolving plane Poiseuille flow is investigated by the direct simulations of the two-dimensional, incompressible Navier-Stokes equations. All the computations were performed for Reynolds number (Re = 7500) which is linearly unstable for this flow. The result reveal that significant reductions in perturbation amplitudes can be obtained by a proper choice of the control wave amplitude and phase even for large disturbance amplitudes. The upstream influence of the control wave is also investigated.

Danabasoglu, G.↗

DOE OSTI2021

Tomographic X-ray particle tracking velocimetry

We investigate the feasibility of in-laboratory tomographic X-ray particle tracking velocimetry (TXPTV) and consider creeping flows with nearly density matched flow tracers. Specifically, in these proof-of-concept experiments we examined a Poiseuille flow, flow through porous media and a multiphase flow with a Taylor bubble. For a full 360° computed tomography (CT) scan we show that the specially selected 60 micron tracer particles could be imaged in less than 3 seconds with a signal-to-noise ratio between the tracers and the fluid of 2.5, sufficient to achieve proper volumetric segmentation at each time step. In the pipe flow, continuous Lagrangian particle trajectories were obtained, after which all the standard techniques used for PTV or PIV (taken at visible wave lengths) could also be employed for TXPTV data. And, with TXPTV we can examine flows inaccessible with visible wave lengths due to opaque media or numerous refractive interfaces. In the case of opaque porous media we were able to observe material accumulation and pore clogging, and for flow with Taylor bubble we can trace the particles and hence obtain velocities in the liquid film between the wall and bubble, with thickness of liquid film itself also simultaneously obtained from the volumetric reconstruction after segmentation. While improvements in scan speed are anticipated due to continuing improvements in CT system components, we show that for the flows examined even the presently available CT systems could yield quantitative flow data with the primary limitation being the quality of available flow tracers.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1979

Relaminarization of fluid flows

The mechanisms of the relaminarization of turbulent flows are investigated with a view to establishing any general principles that might govern them. Three basic archetypes of reverting flows are considered: the dissipative type, the absorptive type, and the Richardson type exemplified by a turbulent boundary layer subjected to severe acceleration. A number of other different reverting flows are then considered in the light of the analysis of these archetypes, including radial Poiseuille flow, convex boundary layers, flows reverting by rotation, injection, and suction, as well as heated horizontal and vertical gas flows. Magnetohydrodynamic duct flows are also examined. Applications of flow reversion for turbulence control are discussed.

Narasimha, R.↗