Search NASA⌕ Search

SEARCH · Search NASA

Results for “POLYETHYLENE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Effects of Cooling Rates on Self-Reinforced Polyethylene Composites via Multiscale Experimental Characterizations

This study investigates cooling rate effects on self-reinforced polyethylene composites (PE-SRCs), focusing on macroscopic thermal and mechanical properties, and micro- to sub-micron morphologies. Unlike conventional fiber-reinforced composites (e.g., carbon and glass fiber based), cooling rate effects on SRCs remain less studied. PE-SRCs were fabricated from ultrahigh molecular weight polyethylene (UHMWPE) fabric and high-density polyethylene (HDPE) matrix with cooling rates from 0.76°C/min to 425°C/min. Tensile properties, including modulus (~9.5 GPa), strength (~360 MPa), and ultimate elongation (~6%), showed no significant cooling rate dependence. However, thermal analysis revealed melting temperature of HDPE matrix decreased from ~130°C to ~126.5°C with total crystallinity reducing from 84% to 75%. Wide-angle X-ray scattering confirmed decreasing crystallinity but at lower values (67%–59%), as thermal analysis might overestimate crystallinity. Small-angle X-ray scattering showed long period decreased from 24.3 to 17.4 nm, attributed to thinner lamellae and closer packing, suggesting limited crystal growth and faster nucleation. While cooling rates alter melting point and crystalline structures of HDPE matrix, these changes do not translate to substantial impact on macroscale mechanical properties of PE-SRCs. This insensitivity might be related to low interfacial shear strength at PE/PE interfaces, enabling process optimization while maintaining mechanical performance.

Cooling rate↗
DOE OSTI2025

Molar-Mass-Dependent Partitioning of Polyethylene in Nanopores of Model Catalyst Supports from Small-Angle Neutron Scattering

Heterogeneous catalysis offers opportunities to enhance valorization of plastic waste via chemical recycling through control of the upcycled product distributions. Minimizing low-value light hydrocarbons is desired; however, fundamental insights into how to control selectivity are lacking. Here we use contrast variation with small-angle neutron scattering (SANS), model perdeuterated polyethylenes (dPEs), and a model liquid hydrocracking product (tetradecane) to quantify polymer partitioning within mesoporous silica (SBA-15). Polyethylene concentration within the mesopores is increased relative to the bulk solution, and this partitioning increases as the temperature increases. However, this polyethylene partitioning is maximized when the radius of gyration of the polymer chains is comparable to the SBA-15 pore size (10 nm). An increased partitioning at higher temperatures is attributed to entropically driven adsorption of PE within the mesopores. There is no observed preferential partitioning of hexatriacontane (a model oligomer) within the mesopores at the temperatures examined. Furthermore, these results suggest that pore size could promote the selective partitioning of polymer species into the mesopores by size. For plastic upcycling, pore-size-dependent partitioning should increase the probability for the reaction of long polymers over oligomeric and small-molecule polyolefin depolymerization products.

Adsorption↗
DOE OSTI2023

Effects of the Hydrophobic Block Length Ratio of Poly(vinylbenzyl N -methylpiperidinium carbonate)- b -polyethylene- b -poly(vinylbenzyl N -methylpiperidinium carbonate) Block Copolymers for Anion Exchange Membrane Electrolysis

Electrolysis of water to produce hydrogen from renewable electricity is an extremely attractive strategy to reduce energy dependence on fossil fuels. Development of membrane and ionomer materials that maintain high performance with long lifetimes is needed. We developed and investigated the performance and durability of a series of polyethylene-based ABA triblock copolymer anion exchange ionomer and membrane (AEI, AEM) materials for anion exchange membrane water electrolysis. Poly(vinylbenzyl N-methylpiperidinium carbonate)-b-polyethylene-b-poly(vinylbenzyl N-methylpiperidinium carbonate) was synthesized with different hydrophobic/hydrophilic block ratios (1.02:1, 2.58:1, and 4.46:1) resulting in a range of ion exchange capacities (1.1–1.8 meq g –1 ) and water swelling (23–154%) characteristics. All AEMs showed full anionic dissociation, as evidenced by linear Arrhenius correlations, and excellent carbonate conductivity of 8–94 mS cm –1 at 50 °C. Hydrophilic phase separation may offer superior chemical durability by only wetting the ion-conducting region of the polymer and avoiding attack at the nonwetted backbone. We evaluated the performance and durability of these AEMs as a function of hydrophobic polyethylene (PE) content. The AEM containing the least amount of PE displayed the highest performance of 1 A cm –2 at 2.3 V but degraded at 40 mV h –1 before catastrophically failing after <3 h at 0.5 A cm –2 . With greater PE-containing AEMs, the degradation rate was reduced by 3 orders of magnitude with only a 0.2 V increase in voltage. Constant current electrolysis for 50 h resulted in a voltage change of 0.3 mV h –1 in a single-cell water electrolyzer and 1 M potassium carbonate. In a 600 h test, the voltage change in the final 200 h was impressively low for an experimental film, 58 μV h –1 . Postmortem analysis indicated that the membrane did not thin and that water becomes more tightly hydrogen-bound in the polymer after electrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Polyethylene Blends for Improved Oxygen Barrier: Processing-Dependent Microstructure and Gas Permeability

Here this work demonstrates a greater than expected enhancement of oxygen barrier properties in linear low-density polyethylene (LLDPE)-based materials by blending LLDPE with high-density polyethylene (HDPE). The films made by melt pressing the LLDPE/HDPE blends had a greater reduction in oxygen permeability coefficients (PO 2 ) than predicted using common permeability reduction models, i.e., the harmonic average model and zero-permeability nanofiller model. The reduction of PO 2 was attributed to the presence of spherulite crystal structures, as revealed by atomic force microscopy combined with infrared spectroscopy (AFM-IR). The LLDPE matrix exhibited significant spherulite formation even at a relatively low addition of HDPEs, which likely formed tortuous pathways for diffusing oxygen molecules. Transport results from melt-pressed films contrast with the results from films with similar compositions prepared by film blowing, which did not show barrier enhancement beyond expectation. AFM-IR revealed that the blown films lacked spherulite crystals likely due to stretching in the machine direction followed by rapid cooling. These findings demonstrate the role of processing in controlling microstructures and thus the oxygen barrier performance. This work offers the possibility of achieving easily recyclable LLDPE-based packaging materials by simple blending of polyethylenes with different crystalline content.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Polymer-fiber-reinforced polymers with enhanced interfacial bonding between polypropylene fiber and polyethylene matrix

Self-reinforced composites (SRCs) consist of reinforcing fibers and a base matrix made of the same thermoplastic polymer, offering lightweight, recyclability, and sustainability benefits. However, limited research exists on composites where the reinforcing thermoplastic polymer fibers differ from the base thermoplastic matrix. Here, this study focuses on investigating the mechanical behavior of such composites and exploring different surface modification methods to enhance the fiber/matrix interfacial bonding using polypropylene fibers and a polyethylene matrix as an example. It is shown that surface treatment with a commercial adhesion promoter containing n-butyl acetate significantly improves the interfacial shear strength between polypropylene fibers and the polyethylene matrix, increasing it by 145% compared to other methods investigated. Additionally, increasing the length of the embedded polymer fiber in the matrix leads to a notable increase in specific interfacial energy. Consequently, the thermoplastic polymer-fiber-reinforced polymers (PFRPs) using surface-treated woven polypropylene fabrics and a polyethylene matrix exhibit a 20% higher tensile strength and a 65% higher toughness compared to non-treated PFRPs. This study also shows that specific mechanical properties (normalized by the composite density) of the investigated woven PFRPs are similar to those of non-treated SRCs under uni-axial tension. Particularly, their ductility outperforms carbon-/glass-/aramid-fiber-reinforced polymers by at least 6 times at a same fiber volume fraction. The investigation of such composites and the exploration of surface modification methods present important progress in the field of thermoplastic PFRPs, which serve as a solution for addressing concerns related to recyclability and sustainability.

Fiber pull-out↗
DOE OSTI2024

Tailoring the Properties of Chemically Recyclable Polyethylene‐Like Multiblock Polymers by Modulating the Branch Structure

Abstract Developing plastics that fill the need of polyolefins yet are more easily recyclable is a critical need to address the plastic waste crisis. However, most efforts in this vein have focused on high‐density polyethylene (PE), while many different types of PE exist. To create broadly sustainable PE with modular properties, we present the synthesis, characterization, and demonstration of materials applications for chemically recyclable PE‐like multiblock polymers prepared from distinct hard and soft blocks using ruthenium‐catalyzed dehydrogenative polymerization. By altering the branching pattern within the soft blocks, a series of PE‐like multiblock polymers were synthesized with tunable glass transition temperatures ( T g ) while maintaining consistent high melting temperatures ( T m ). A clear U‐shape trend between T g and mechanical properties was found, showcasing their potential as sustainable materials with tailored properties spanning commercial linear low‐density polyethylene (LLDPE) and low‐density polyethylene (LDPE). These materials offer adjustable adhesive strength to metal and demonstrate chemical recyclability and selective depolymerization in mixed plastic streams, promoting circularity and separation.

Zhao, Yucheng↗
DOE OSTI2025

Effect of Crystallinity on Polymer Chain Compression in Polyethylene Dynamically Loaded with In-Situ X-Ray Diffraction

Abstract Polyethylene (PE) is a polymer widely used in commercial applications, where the properties of PE can be altered based on the molecular conformation. In this study, shock compression experiments with in-situ x-ray diffraction were conducted on two conformations of PE– low density polyethylene (LDPE) and ultra-high molecular weight polyethylene (UHMWPE). Encouragingly, X-ray diffraction patterns were easily observed in LDPE, which is only 25% crystalline. In agreement with a previous study on HDPE, LDPE exhibited a phase transition at 7.7 GPa. Lower pressure experiments on UHMWPE and LDPE exhibited polymer chain compression, but no occurrence of a phase transition.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Using Nanofiller Assemblies to Control the Crystallization Kinetics of High-Density Polyethylene

Polyethylene-grafted nanoparticles (NPs) are organized into a variety of assemblies in a polydisperse polyethylene melt by tailoring the graft density and molecular weights of the graft chains. Under these conditions we systematically vary NP assemble state and study is consequences on crystal nucleation and growth rates. We find that the nucleation rate is suppressed below that of the unfilled polymer for good NP spatial dispersion. However, poorer dispersion, which leads to the formation of NP assemblies, can accelerate nucleation likely by providing multiple heterogenous sites due to topographical features. We find that a key parameter, the chain overcrowding in the brush, can predict these nucleation trends – in this language, the most enhanced nucleation rate is found when the grafts are the most overcrowded, and hence the least interpenetrated with the matrix chains. This result is consistent with one other literature result which utilized short crystallizable polyethylene glycol grafts in short PEO matrices. The growth kinetics were retarded for all nanocomposites, their temperature dependences were essentially equal to that for the pure polymer (in the absence of NPs) – the NPs thus do not affect secondary nucleation, indicating that the transport of the matrix to the growth front is the rate determining step. Thus, evidently the increase in matrix viscosity, or reduction in growth rates, is directly determined by the agglomeration state of the NPs. These results are consistent with past works with bare silica NPs in PEO, and with silica NPs grafted with amorphous chains in a PEO matrix, suggesting that growth kinetics in these systems apparently follow “universal” behavior. Additionally, there are initial hints that the ratio of the effective surface area of the NP clusters per unit matrix volume provides a unified description of the NP induced confinement that slows growth kinetics. Furthermore, our work thus shows that there is an evolving understanding of the role of NPs on crystallization kinetics, in particular crystal growth where trends appear to be independent of the grafts ability to crystallize.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Catalytic Consequences of Hierarchical Pore Architectures within MFI and FAU Zeolites for Polyethylene Conversion

The benefits of hierarchical zeolites for the conversion of bulky molecules like polymeric waste have been reported in the literature; however, the impact of mesopore sizes and connectivities on rates, product selectivities, and catalyst deactivation in the context of plastic upcycling has not been systematically probed. Here, in this study, we synthesized a suite of hierarchical MFI and FAU zeolites via desilication under varying conditions for metal-free polyethylene conversion reactions under batch and flow conditions (473–523 K). Polyethylene (solid) conversion rates (normalized by Bro̷nsted acid site density) were higher on hierarchical than parent microporous MFI regardless of mesopore connectivities, i.e., open or constricted, suggesting that the incorporation of mesopores facilitates diffusion of intermediate products to access medium-pore protons for successive scission events. Furthermore, higher branched:linear gaseous product ratios were produced on hierarchical than parent MFI, since mesopores allow for egress of bulkier molecules without undergoing further secondary events, e.g., isomerization back to linear alkanes/alkenes or beta scission. Solid conversion rates on hierarchical FAU synthesized via desilication with cetyltrimethylammonium bromide (CTABr), however, were not higher than parent FAU, likely because the presence of CTABr facilitates recrystallization of leached species to form composites (hierarchical FAU and ordered mesoporous materials) with more isolated mesopores. The stagnation in rates, despite increased mesopore volumes (>0.22 cm 3 g –1 ), highlights the importance of confinement effects provided by micropores for cleaving C–C bonds at modest reaction conditions. In situ 1 H MAS NMR performed on polyethylene with MFI zeolite show that PE isomerizes (and potentially deconstructs) at temperatures near 450 K, highlighting the role of Bro̷nsted acid sites in activating C–C bonds under mild reaction conditions. Catalyst recyclability studies showed that all catalysts undergo deactivation during plastic upcycling reactions, but to varying extents. Overall, hierarchical materials have better catalyst stability than parent materials, although the differences in stability between hierarchical and parent FAU are smaller than those for MFI. Taken together, these findings demonstrate how rates, selectivities, and catalyst deactivation from plastic upcycling reactions can be controlled via fine-tuning the identity and connectivity of mesopores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Thermodynamically leveraged solventless aerobic deconstruction of polyethylene-terephthalate plastics over a single-site molybdenum-dioxo catalyst

Here, we describe the solventless catalytic deconstruction of polyethylene-terephthalate (PET) under an aerobic atmosphere, mediated by an earth-abundant, low-cost activated carbon (AC)-supported single-site molybdenum-dioxo catalyst (AC/MoO 2 ). Catalytic amounts of AC/MoO 2 selectively convert waste PET into its monomer, terephthalic acid (TPA), within 4 h at 265 °C with yields as high as 94% under 1 atm air. Pure crystalline TPA product sublimes from the reaction hot zone, crystallizing on the reactor cold zone, thus avoiding the need for separation and purification steps. This process does not employ any hazardous/toxic reducing agents or solvents, and the catalyst can be recycled multiple times without loss of activity, rendering this process highly atom-efficient. According to computational and experimental mechanistic studies, the AC/MoO 2 catalyst mediates a thermoneutral metal-catalyzed β-scission step, followed by an exothermic step that converts the vinyl benzoate intermediate to TPA and acetaldehyde using trace amounts of moisture in the air. The formation of gaseous acetaldehyde makes the isolation of TPA from the reaction mixture facile and industrially favorable, especially since solvents are unnecessary. The present methodology is also extended to the deconstruction of other frequently used polyester plastics, polybutylene terephthalate (PBT), polyethylene naphthalate (PEN), and polyethylene furanoate (PEF), and operates equally well with post-consumer waste products. Notably, this process is also compatible with plastic mixtures of polyesters with polyolefins, polyamides, and polycarbonates, leading to the selective conversion of each polyester to the corresponding monomer, leaving the residual polymer unchanged and polyester-free.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Confocal Raman Microscopy as a Probe of Material Deconstruction in Processed Low-Density Polyethylene Particles

Confocal Raman microscopy was applied to detect structural change within individual particles of low-density polyethylene (LDPE) following chemical and electrochemical processing steps that aimed to facilitate material decomposition. A high numerical aperture (NA) oil-immersion objective enabled depth-profiling through the near surface region (20 μm–40 μm) of irregularly shaped particles with an axial spatial resolution < 2 μm estimated from measurements of instrument detection efficiency profiles. Changes in vibrational bands sensitive to polyethylene crystallinity were evident following treatments and linked to the release of low molecular weight compounds present as additives and products of processing. Effects of processing were probed by monitoring the rise of Raman scattering intensity in vibrational modes associated with polyethylene chains in a zig-zag (trans) conformation near 1128 cm –1 , 1294 cm –1 , and 1418 cm –1 , signaling chain clustering and development of organized, crystalline-like assemblies. Pristine LDPE particles displayed a uniform structure across the near surface region, while particles treated initially with chemical extractant and then further processed displayed increasingly enhanced crystallinity up to the maximum depth probed (40 μm). As a step toward measurements on ensembles of particles, least squares modeling was adapted to derive pure component spectra reflecting crystallinity change within spectral datasets. The work demonstrates high spatial resolution Raman depth-profiling for the characterization of processed polymers using a high NA immersion objective to overcome the limitations of air-objectives often used for confocal Raman microscopy.

Wahiduzzaman, Md. [Department of Chemistry and Bio↗
DOE OSTI2023

Two-step conversion of polyethylene into recombinant proteins using a microbial platform

Background: The increasing prevalence of plastic waste combined with the inefficiencies of mechanical recycling has inspired interest in processes that can convert these waste streams into value-added biomaterials. To date, the microbial conversion of plastic substrates into biomaterials has been predominantly limited to polyhydroxyalkanoates production. Expanding the capabilities of these microbial conversion platforms to include a greater diversity of products generated from plastic waste streams can serve to promote the adoption of these technologies at a larger scale and encourage a more sustainable materials economy. Results: Herein, we report the development of a new strain of Pseudomonas bacteria capable of converting depolymerized polyethylene into high value bespoke recombinant protein products. Using hexadecane, a proxy for depolymerized polyethylene, as a sole carbon nutrient source, we optimized media compositions that facilitate robust biomass growth above 1 × 10 9 cfu/ml, with results suggesting the benefits of lower hydrocarbon concentrations and the use of NH 4 Cl as a nitrogen source. We genomically integrated recombinant genes for green fluorescent protein and spider dragline-inspired silk protein, and we showed their expression in Pseudomonas aeruginosa, reaching titers of approximately 10 mg/L when hexadecane was used as the sole carbon source. Lastly, we demonstrated that chemically depolymerized polyethylene, comprised of a mixture of branched and unbranched alkanes, could be converted into silk protein by Pseudomonas aeruginosa at titers of 11.3 ± 1.1 mg/L. Conclusion: This work demonstrates a microbial platform for the conversion of a both alkanes and plastic-derived substrates to recombinant, protein-based materials. The findings in this work can serve as a basis for future endeavors seeking to upcycle recalcitrant plastic wastes into value-added recombinant proteins.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Sensitivity Calculations for Systems with Polyethylene Reflector Materials Using CLUTCH

The SCALE 6.2.4 code package contains four sequences for calculating $k_{eff}$ sensitivity coefficients. Two of these sequences use deterministic transport solvers: a one-dimensional (1D) capability based on XSDRN, and a two-dimensional (2D) capability based on NEWT. These sequences are restricted to the multigroup (MG) treatment of neutron energy. The three-dimensional (3D) sequences use the KENO V.a or KENO-VI Monte Carlo transport codes and can be used to calculate sensitivity coefficients with either MG or continuous-energy (CE) transport. The 3D sensitivities are ultimately reported in an MG structure, regardless of the method used in the transport calculations. If desired, the sensitivity coefficients can be reported with very fine energy resolution from a CE calculation, but they are calculated only in the MG library structure in the MG mode. CE TSUNAMI methods are available in SCALE starting in SCALE version 6.2. Sensitivity coefficients were generated using the 3D sequences as part of the generation of the SCALE 6.2.2 Validation Report; difficulties encountered when using the CLUTCH method for thick, fissionable-material reflectors were discussed and investigated as documented in a previous paper. This paper discusses the difficulties encountered in generating accurate sensitivity coefficients using the CLUTCH technique for polyethylene reflectors for two fast spectrum benchmarks. Direct perturbation (DP) calculations were performed to confirm the accuracy of the total sensitivity coefficient for important isotopes with large sensitivities in the system. Discrepancies were detected for CLUTCH-calculated sensitivity coefficients in the reflector of a critical experiment with a radial polyethylene reflector. A simple polyethylene-reflected plutonium sphere was then used to further investigate the discrepancy. Calculations performed using the iterated fission probability (IFP) method generated accurate sensitivity coefficients in both cases. The results of this study emphasize the need to confirm CLUTCH sensitivity results with DP calculations. IFP calculations are generally less efficient but more reliable than CLUTCH calculations. Improvements to the CLUTCH methodology that retain the greater efficiency but address identified difficulties are therefore potentially useful to analysts.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Rossi-α Measurements on a System Consisting of Weapons Grade Plutonium Moderated by Polyethylene [Poster]

A series of experiments nicknamed "TEX," standing for Thermal-Epithermal eXperiments, were performed at the National Criticality Experiments Research Center (NCERC) on the Planet critical assembly. The TEX experiment campaigns are a collaboration between Los Alamos National Laboratory (LANL) and Lawrence Livermore National Laboratory (LLNL) and funded by the Nuclear Criticality Safety Program (NCSP). The TEX experiment consists of several campaigns; this work specifically discusses measurements made on one series of TEX experiments designed to examine the thermal scattering law (TSL) for polyethylene. This series consisted of two different critical configurations which contain plutonium fuel. The plutonium plates are 2 in. by 3 in. by 0.125 in. Zero Power Physics Reactor (ZPPR) plates and are placed in a tray in an array of 6 plates by 4 plates wide creating a 12 in. by 12 in. square. These trays of plutonium are interleaved between polyethylene plates. These measurements differ from previous TEX experiments in that they examine a more thermal neutron spectrum than previously examined by interleaving much thicker interstitial moderating plates than the previous measurements. The two configurations differ in the thickness of polyethylene between the fissile material. While the experiment was designed to examine the TSL, this work only examines the results of Rossi-α measurements on the two different configurations. For both configurations, Rossi-α measurements were performed to experimentally validate the neutron spectrum.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Impact of Thermal Scattering Law on Similarity Assessment in Light-Water or Polyethylene-Moderated Systems [Slides]

This presentation found validation efforts revealed noticeable differences in c k for light-water and polyethylene moderated systems when compared to PST-002-001. Additionally, although 1 H-H 2 O and 1 H-poly use the same cross section and covariance data, the treatment of TSLs in SCALE lead to no contribution to ck between polyethylene application and benchmark experiment. When H 2 O contribution were removed the difference in c k appears to come from 239 Pu chi. Sensitivity profiles and data-induced uncertainty confirmed that the polyethylene application was more closely resembling the benchmark experiment. Specific differences between similar systems can be accounted for and examined to help understand differences in similarity (c k ) between systems was a conclusion reached by this presentation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Sum-of-Fractions Methodology for Actinides in Water- and Polyethylene-Moderated and -Reflected Systems

Sum-of-fractions is a method intended to make sure a subcritical margin for aqueous solutions and slurries of fissionable isotopes exists. The method indicates that a system is subcritical if the sum of the ratios of the mass of each isotope (in a mixture) to its individual minimum subcritical mass limit is less than or equal to one. Historically, the basis of the sum-of-fractions has been derived from allowances given in the American National Standards Institute (ANSI)/ American Nuclear Society (ANS)-8.15-1981. However, the allowance was removed in ANSI/ANS-8.15-2014 due to a lack of technical basis. A methodology was developed to assess the validity of using the sum-of-fractions for water- or polyethylene-moderated systems for the following nuclides: 232 U, 233 U, 234 U, 235 U, 237 Np, 236 Pu, 238 Pu, 239 Pu, 240 Pu, 241 Pu, 242 Pu, 241 Am, 242 m Am, 243 Am, 242 Cm, 243 Cm, 244 Cm, 245 Cm, 246 Cm, 247 Cm, 249 Cf, and 251 Cf. The methodology uses available benchmark data for mixtures of 233 U, 235 U, and 239 Pu to establish the calculational margin, and a mass limit reduction to establish the margin of subcriticality. Water- or polyethylene-moderated and -reflected mixtures containing the nuclides are evaluated with the code system, SCALE 6.2.4. Including the calculational margin, subcritical mass limits for each nuclide were computed for optimally water- or polyethylene-moderated and fully reflected systems. These masses were used to create nuclide mixtures in which the sum of the mass to subcritical mass limit ratios is one. The various nuclide mixtures were modeled over a range of moderation and demonstrate the keff does not exceed the calculational margin. For additional assurance of subcriticality, a significant mass reduction is applied to each computed minimum critical mass of the nuclides without adequate benchmark data consistent with the method in ANSI/ANS-8.15-2014.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

Investigating Similarity Differences for Light-Water-Moderated and Polyethylene-Moderated Systems [Slides]

Validation efforts revealed noticeable differences in c k for light-water and polyethylene moderated systems when compared to experimental systems. Although 1 H-H 2 O and 1 H-poly use some of the same cross section and identical covariance data, the treatment of TSLs in SCALE lead to no contribution to c k between polyethylene application and benchmark experiment. When H 2 O contribution is removed the difference in c k appears to come from 239 Pu chi. Sensitivity profiles and data-induced uncertainty confirm that the polyethylene application more closely resembles the benchmark experiment. Interrogation techniques were used to observe how TSLs and nuclide IDs affect c k . Specific differences between similar systems can be accounted for and examined to help understand differences in similarity (c k ) between systems

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Evaluation of the Sum-of-Fractions Methodology for Water and Polyethylene Moderated Systems

Sum-of-Fractions is a method intended to assure a subcritical margin for aqueous solutions and slurries of fissionable isotopes. The method indicates that a system is subcritical if the sum of the ratios of the mass of each isotope in a mixture to its individual minimum subcritical mass limit is less than or equal to one. The basis of the Sum-of Fractions has historically been derived from allowances given in ANSI/ANS-8.15-1981. However, the allowance was removed in ANSI/ANS-8.15-2014 due to a lack of technical basis. A methodology was developed to assess the validity of using the Sum-of-Fractions for water or polyethylene moderated systems for the following nuclides: 232 U, 233 U, 234 U, 235 U, 237 Np, 236 Pu, 238 Pu, 239 Pu, 240 Pu, 241 Pu, 242 Pu, 241 Am, 242 mAm, 243 Am, 242 Cm, 243 Cm, 244 Cm, 245 Cm, 246 Cm, 247 Cm, 249 Cf, and 251 Cf. The methodology uses available benchmark data for mixtures of 233 U, 235 U, and 239 Pu to establish the calculational margin, and a mass limit reduction to establish the margin of subcriticality. Water or polyethylene moderated and reflected mixtures containing the nuclides are evaluated with SCALE 6.2.4. Including the calculational margin, subcritical mass limits for each nuclide were computed for optimally water or polyethylene moderated and fully reflected systems. These masses were used to create nuclide mixtures in which the sum of the mass to subcritical mass limit ratios is one. The various nuclide mixtures were modeled over a range of moderation and demonstrate the k eff does not exceed the calculational margin. For additional assurance of subcriticality, a significant mass reduction is applied to each computed minimum critical mass of the nuclides without adequate benchmark data consistent with the method in ANSI/ANS-8.15-2014.

07 ISOTOPE AND RADIATION SOURCES↗