SEARCH · Search NASA

Results for “PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2024

High Pressure–Temperature Study of MgF 2 , CaF 2 , and BaF 2 by Raman Spectroscopy: Phase Transitions and Vibrational Properties of AF 2 Difluorides

The phase transition of AF 2 difluorides strongly depends on pressure, temperature, and cationic radius. Here, we have investigated the phase transition of three difluorides, including MgF 2 , CaF 2 , and BaF 2 , at simultaneously high pressures and temperatures using Raman spectroscopy and X-ray diffraction in externally heated diamond anvil cells up to 55 GPa at 300–700 K. Rutile-type difluoride MgF 2 with a small cationic radius undergoes a transition to the CaCl 2 -type phase at 9.9(1) GPa and 300 K, to the HP-PdF 2 -type phase at 21.0(2) GPa, and to the cotunnite-type phase at 44.2(2) GPa. The phase transition pressure to the HP-PdF 2 and cotunnite structure at 300 K for our single crystal was found to be higher than that in previous studies using polycrystalline samples. Elevating the temperature increases the transition pressure from rutile- to the CaCl 2 -type phase but has a negative influence on the transition pressure when MgF 2 transforms from the HP-PdF 2 - to cotunnite-type phase. Meanwhile, the transition pressure from the CaCl 2 - to HP-PdF 2 -type phase for MgF 2 was identified to be independent of the temperature. Raman peaks suspected to belong to the α-PbO 2 -type phase were observed at 14.6–21.0(1) GPa and 400–700 K. At 300 K, difluorides CaF 2 and BaF 2 in the fluorite structure with larger cationic radii transform to the cotunnite-type phase at 9.6(3) and 3.0(3) GPa at 300 K, respectively, and BaF 2 further undergoes a transition to the Ni 2 In-type phase at 15.5(4) GPa. For both CaF 2 and BaF 2 , elevating the temperature leads to a lower transition pressure from fluorite- to the cotunnite-type phase but has little influence on the transition to the Ni 2 In structure. Raman data provide valuable insights for mode Grüneisen parameters. We note that the mode Grüneisen parameters for both difluorides and dioxides vary linearly with the cation radius. Further calculations for the mode Grüneisen parameters at high pressures for MgF 2 , CaF 2 , and BaF 2 yield a deeper understanding of the thermodynamic properties of the difluorides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

The impact of metastability on the high-pressure behavior of cerium

The structures adopted by solids under pressure are often assumed to reflect thermodynamic equilibrium, yet in many materials phase selection is strongly influenced by kinetic pathways and microstructural inheritance. Elemental cerium (Ce) exemplifies this challenge, with decades of conflicting reports describing different high-pressure crystal structures emerging under nominally identical conditions. Here we use neutron diffraction from large ( ~ 60 mm 3 ) sample volumes to follow the structural evolution in ultra-high-purity Ce during controlled pressure-temperature cycling between 85 and 295 K and up to 8 GPa. We find that the crystal structure formed at high pressure depends on the compression pathway: slow compression ( ~ 0.25 GPa hr −1 ) at room temperature favors an orthorhombic phase (α'), whereas slow ( ~ 0.25 GPa hr −1 ) and also moderately faster ( ~ 0.5 GPa hr −1 ) compression at low temperature stabilizes a pure monoclinic phase (α"). The low-temperature phase persists metastably over a wide temperature range but transforms irreversibly upon heating above ~ 280 K, or modest pressure cycling. Remarkably, the lower-pressure γ phase remains trapped far beyond the expected stability field, persisting to the highest pressures studied. These observations show that phase selection in Ce is governed by kinetics and microstructural memory rather than equilibrium thermodynamics or sample morphology alone, establishing path dependence as a defining feature of its high-pressure behavior.

Ridley, Christopher J. [Oak Ridge National Laborat↗

DOE OSTI2025

A limit to strong shock behavior in the dynamic response of matter at pressure

Solids under high pressures experience a series of regimes, where their microstructure adapts to the applied compression and these key transitions are discussed in this paper. As strain increases, new forces emerge at extreme pressures. A previous study introduced the concept of the weak shock limit (WSL), at which the ambient theoretical shear strength is overcome. Above the WSL, further deformation under strong shock conditions results in electrons occupying higher energy levels as strain increases. As pressure rises further, shock melting occurs in the material and at around three times this melting pressure, the strong shock limit is reached where the driving physics under pressure switches, with electrons forced into higher energy states. This leads to significant reduction in their compressibility due to changes in electronic structure and developing electron degeneracy pressures. A derivation for conditions at this state is presented, which indicates that a dependence of the threshold pressure on the free electron number density defines the limit observed. This correlation suggests that ambient material moduli govern material compression up to nearly 50% strain. These observations show that models should account for different behaviors as dominant physics changes in each regime accessed as shock pressure increases.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Raman scattering of rhenium for secondary pressure calibration

With the increasing number of 100 s GPa experiments in the diamond anvil cell (DAC), improved accuracy in secondary pressure calibrations to extreme pressures is essential. The rhenium equation of state has been proposed as a pressure calibrant via x-ray diffraction with potentially broad applications as it is commonly used as a gasket material in DAC experiments. In this work, we conducted Raman spectroscopy experiments on rhenium in the DAC and report the pressure shift of the E2g mode, a refined high-pressure C44 and mode-Grüneisen parameter above 200 GPa. We used flat, beveled, and toroidal diamond anvils under quasi-hydrostatic and non-hydrostatic conditions. By measuring the E2g mode from the culet edge to the center, we analyzed pressure distribution based on culet type and distance from the anvil center. The shift in the E2g mode can be expressed as a function of pressure, and diamond edge measurements appear reliable across all anvil types. Comparing the center and edge pressures reveals anvil cupping, offering insights into predicting or preventing anvil failure during materials properties measurements at extreme conditions.

Diamond anvil cells↗

DOE OSTI2024

First-order structural phase transition at low temperature in GaPt 5 P and its rapid enhancement with pressure

Single crystals of X Pt 5 ⁢P (X = Al, Ga, and In), belonging to the 1-5-1 family of compounds, were grown from a Pt-P solution at high temperatures, and measurements of the ambient pressure, temperature-dependent magnetization, resistivity, and x-ray diffraction were made. Additionally, the ambient-pressure Hall resistivity and temperature-dependent resistance under pressure were measured on GaPt 5 ⁢P. All three compounds have a tetragonal P4/mmm crystal structure at room temperature with metallic transport and weak diamagnetism over the 2–300 K temperature range. Surprisingly, at ambient pressure, both the transport and magnetization measurements on GaPt 5 ⁢P show a steplike feature in the 70–90 K region, suggesting a possible structural phase transition. Neither AlPt 5 ⁢P nor InPt 5 ⁢P have any signatures of a phase transition in their temperature-dependent electrical resistance and magnetization data. Both the hysteretic nature and sharpness of the features in the GaPt 5 ⁢P data suggest that the transition is first-order. Further, single-crystal x-ray diffraction measurements provided further details of the structural transition with a possibility of a crystal symmetry different from P⁢4/mmm below the transition temperature. The transition is characterized by anisotropic changes in the lattice parameters and a volume collapse with respect to the high-temperature tetragonal crystal structure. Furthermore, satellite peaks are observed at two distinct and nonequivalent wave vectors (0, 0, 0.5) and (0.5, 0.5, 0.5), and density functional theory calculations present phonon softening, especially at (0.5, 0.5, 0.5), as a possible driving mechanism. Additionally, we find that the structural transition temperature increases rapidly with increasing pressure, reaching room temperature by ~2.2 GPa, highlighting the high degree of pressure sensitivity of GaPt 5 ⁢P and fragile nature of its room-temperature structure. Even though the volume collapse and extreme pressure sensitivity suggest chemical pressure should drive a similar structural change in AlPt 5⁢ P, where both unit-cell dimensions and volume are smaller, its structure is found to be the same as that of the room-temperature GaPt 5 ⁢P. Overall, GaPt 5 ⁢P stands out as a sole member of the 1-5-1 family of compounds for which a temperature-driven structural change has been observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Pressure Variation of Magnetism in Chromium and Manganese Mono-Pnictide Superconductors

The transition-metal pnictide system MX (M = transition metal and X = P, As, and Sb) has been studied for several decades because those materials show rich magnetic phase diagrams. Since the recent discovery of unconventional superconductivity in isomorphic CrAs and MnP under high pressures, physical properties of the two materials have been investigated intensively as a function of pressure. In particular, since both materials exhibit quantum critical behavior with applied pressure, magnetic fluctuations are considered to be the key to the superconducting pairing mechanism. Interestingly, both materials were found to show double helical spin structures in the vicinity of the pressure-induced superconducting phase. Here, a review is given on the magnetic properties of MX, including our high-pressure neutron scattering studies performed in CrAs and MnP. We also give a brief review on technical developments of high pressure cells for neutron diffraction, including the high pressure cells used for our high pressure measurements in CrAs and MnP.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Tuning the magnetic properties of the spin-split antiferromagnet MnTe through pressure

The hexagonal antiferromagnet MnTe has attracted enormous interest as a prototypical example of a spin-compensated magnet in which the combination of crystal and spin symmetries lifts the spin degeneracy of the electron bands without the need for spin-orbit coupling, a phenomenon called nonrelativistic spin splitting (NRSS). Subgroups of NRSS are determined by the specific spin-interconverting symmetry that connects the two opposite-spin sublattices. In MnTe, this symmetry is rotation, leading to the subgroup with spin splitting away from the Brillouin zone center, often called altermagnetism. MnTe also has the largest spontaneous magnetovolume effect of any known antiferromagnet, implying strong coupling between the magnetic moment and volume. This magnetostructural coupling offers a potential knob for tuning the spin-splitting properties of MnTe. Here, we use neutron diffraction with in situ applied pressure to determine the effects of pressure on the magnetic properties of MnTe and further explore this magnetostructural coupling. We find that applying pressure significantly increases the Néel temperature, but decreases the ordered magnetic moment. We explain this as a consequence of strengthened magnetic exchange interactions under pressure, resulting in higher 𝑇 N , with a simultaneous reduction of the local moment of individual Mn atoms, described here via density functional theory. This reflects the increased orbital hybridization and electron delocalization with pressure. In conclusion, these results shed light on the competition between magnetic exchange interactions and the strength of individual magnetic moments and show that the magnetic properties of MnTe can be controlled by pressure, opening the door to improved properties for spintronic applications through tuning via physical or chemical pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Accelerated oxidation of epoxy thermosets with increased O 2 pressure

Polymer oxidation is usually accelerated with temperature, which is therefore applied in nearly every experimental approach dealing with predictive materials aging. Because of this simple approach, we may tend to neglect that the effective concentration of oxygen also acts as a rate multiplier for oxidation. Increasing the oxygen partial pressure in an aging environment accelerates oxidation, and while there is often a near proportional increase initially, the effect of additional oxygen usually transitions to a saturation level at some elevated pressure. This has been theoretically described in the general autoxidation scheme and is well recognized. However, for many materials the exact rate behavior under moderately increased oxygen concentration remains to be established. We therefore review epoxy oxidation and offer a broader overview of its behavior under increased O 2 partial pressure. Experimental data are given for a few thermoset materials demonstrating their rate behavior under O 2 partial pressure up to 4 atm, meaning approximately 20 times more than under standard atmospheric conditions. Confirmative evidence suggests that epoxy materials will reach saturation oxidation rates only at significantly higher O 2 partial pressure. In such a high-pressure regime it is theoretically possible to not only accelerate oxidation, but to transition into a condition where O 2 diffusion can be increased without further accelerating the oxidation rate. Finally, this can reduce diffusion limited oxidation effects under specific accelerated aging conditions as a combination of temperature and O 2 partial pressure.

36 MATERIALS SCIENCE↗

DOE OSTI2024

On the prediction of pressure effects for the combination kinetics of two alkyl radicals with the geometric mean rule

Here, alkyl combination reactions, along with their reverse alkane unimolecular decomposition reactions, are widely present in pyrolysis and combustion systems. These reactions occur mainly at temperatures at which their rate coefficients depend on pressure, and only a few studies have explored this dependence for large size alkyls. The accurate calculation of these kinetic data is limited by the size of the alkyl fragments involved, since the theoretical methods used are computationally expensive. Therefore, little reliable data is available for the modeling of real fuels alkane decomposition kinetics. In this paper, we propose an alternative approach that allows an accurate estimation of pressure-dependent kinetic rates for the combination of long-chain alkyl radicals, based on tabulated reaction models. The rates of combination of linear alkyls radicals forming ethane to pentane were calculated using the CASPT2-F12/cc-pVDZ-F12 level within VRC-TST theory combined with master-equation simulations. The computed high-pressure limit rate coefficients showed that n-propyl could be a minimum-size representative structure for larger n-alkyl chain, but this approach fails to capture the pressure dependence of the reaction that remains size-dependent for larger alkyls. The Geometric Mean Rule (GMR), a simple rule that links the self and cross-reactions of three alkyl radicals, is used to address this issue. Our theoretical calculations show for the first time that the GMR applies not only at the high-pressure limit, but also for every pressure explored. The GMR is shown to be accurate, with a maximum 22 % deviation in the falloff region for the estimation of rates for small alkyl combinations. Using this method, we propose a tabulated reaction rate rule for the combination of alkyl radicals up to C5+C5. The use of computed rate coefficients with the GMR approximation opens ways to develop pressure-dependent reaction rate rules for large n-alkyl combinations, based on accurate and computationally expensive theoretical calculations on smaller alkyl fragments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Pressure-induced insulator-to-metal transition in the quantum spin liquid candidate lithium ytterbium diselenide

Metallization of quantum spin liquid (QSL) materials has long been considered as a potential route toward unconventional superconductivity. Here, we investigate the pressurization of lithium ytterbium diselenide (LiYbSe 2 ), a three-dimensional QSL candidate with a pyrochlore structure. High-pressure X-ray diffraction (up to 15 GPa) and Raman spectroscopy (up to 48 GPa) reveal no significant structural changes within this pressure range. Remarkably insulating, LiYbSe 2 exhibits a resistance below 10 5 Ω only at pressures exceeding 25 GPa, accompanied by a gradual reduction of band gap upon compression. Interestingly, an insulator-to-metal transition occurs around 68 GPa, and the metallic behavior persists up to 123.5 GPa, the highest pressure achieved in this study. A possible sign of magnetic transitions is also observed. The insulator-to-metal transition in LiYbSe 2 under high pressure presents an ideal platform to explore the pressure effects on QSL candidates of spin-1/2 Yb 3+ systems with various lattice patterns.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

High-Pressure Melting Experiments of Fe 3 C and a Thermodynamic Model of Fe-C Liquids for the Earth's Core

Melting experiments of Fe 3 C were conducted to 85 GPa in laser-heated diamond anvil cells with in situ X-ray diffraction and post-experiment textural observation. From the determined pressure-temperature conditions of the melting curve for Fe 3 C, together with literature data on the melting point of diamond and eutectic point of the system Fe-Fe 3 C/Fe 7 C 3 under high pressures, we established a self-consistent thermodynamic model for high-pressure melting of the system Fe-C including the mixing parameters for liquids. The results show that mixing of Fe and C liquids is negatively nonideal from 1 bar to the pressure at the center of the Earth. The departure from ideal mixing becomes progressively larger with increasing pressure, which leads to greatly stabilized liquids under core pressures. The modeled carbon content in eutectic melts under core pressures is 3.3–4.4 wt%. From the Gibbs free energy, we derived an internally consistent parameters for Fe-C outer cores which included the crystallizing points at their bottoms, isentropic thermal profiles, and densities and longitudinal seismic wave speeds (Vp). While the addition of carbon in excess of the eutectic melt composition effectively reduces the density of iron liquid, the Vp of iron liquid is not greatly changed. Therefore, the low density and high Vp of PREM relative to pure iron cannot be reconciled by an Fe-C liquid. Therefore, the Earth's core cannot be approximated by the system Fe-C and should include another light element.

58 GEOSCIENCES↗

DOE OSTI2025

Pressure tuning of competing interactions on a honeycomb lattice

Exchange interactions are mediated via orbital overlaps across chemical bonds. Thus, modifying the bond angles by physical pressure or strain can tune the relative strength of competing interactions. Here we present a remarkable case of such tuning between the Heisenberg (J) and Kitaev (K) exchange, which respectively establish magnetically ordered and spin liquid phases on a honeycomb lattice. We observe a rapid suppression of the Néel temperature (T N ) with pressure in Ag 3 LiRh 2 O 6 , a spin-1/2 honeycomb lattice with both J and K couplings. Using a combined analysis of x-ray data and first-principles calculations, we find that pressure modifies the bond angles in a way that increases the ∣K/J∣ ratio and thereby suppresses T N . Consistent with this picture, we observe a spontaneous onset of muon spin relaxation (μSR) oscillations below T N at low pressure, whereas in the high pressure phase, oscillations appear only when T < T N /2. Unlike other candidate Kitaev materials, Ag 3 LiRh 2 O 6 is tuned toward a quantum critical point by pressure while avoiding a structural dimerization in the relevant pressure range.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Anomalous elastic softening in ferroelectric hafnia under pressure

his study employs first-principles density-functional theory (DFT) calculations to explore the elastic and mechanical properties of ferroelectric hafnia (HfO 2 ) in its polar orthorhombic 𝑃⁢𝑐⁢𝑎⁢2 1 phase under varying hydrostatic pressure conditions up to 30 GPa. Utilizing a plane-wave basis set and Perdew-Burke-Ernzerhof generalized-gradient approximation for solids in our DFT calculations, we investigate both pure and yttrium-substituted HfO 2 . Our findings reveal an anomalous reduction in the 𝐶 33 component of the elastic tensor with increasing pressure, which becomes significant above 15 GPa and signals a potential pressure-driven structural phase transition at higher pressure. The analysis of atomic displacements under pressure sheds light on the unusual mechanical behavior and phase stability of this material. Additionally, we observe a transition from an indirect band gap to a direct band gap with increasing pressure, which could have significant implications for optical applications. Here, the effects of yttrium substitution on the mechanical and electronic properties are further examined, revealing that yttrium substitution softens the elastic response of this material and reduces the electronic band gap. These results enhance our understanding of elastic and mechanical responses of ferroelectric hafnia and its potential for applications in microelectronics, piezoelectric devices, and nonvolatile ferroelectric random-access memories. Further experimental validation is recommended to confirm our predictions and explore the practical implications of the observed phase transitions and electronic behavior of the ferroelectric hafnia under high-pressure conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Birefringence axis rotation and nonlinear response of a side-hole fiber pressure sensor

The pressure-induced birefringence of side-hole fibers has been widely explored for hydrostatic pressure measurement. Here, this paper studies the effects of the initial birefringence of a side-hole fiber on the pressure response of polarimetric sensors based on side-hole fibers. A mathematical model, where the stress field induced by the pressure is assumed to be uniform in the core region of the fiber, was established to calculate the birefringence and optical axis rotation as a function of the differences between the two principal stress components of the stress field in the core region. Simulation results show that when there is misalignment between the initial birefringence axes and the principal axes of the stress field, pressure changes cause rotations of the birefringence axis, leading to complicated and nonlinear changes of birefringence as a function of pressure. Experiments were conducted using fiber-Bragg-grating-based resonators on side-hole fibers with different initial birefringence, and the results agree well with the simulation. The results underscore the importance of the control of magnitude and direction of the initial birefringence of the side-hole fiber and provide guidelines for the design and fabrication of side-hole fiber pressure sensors.

42 ENGINEERING↗

DOE OSTI2025

Electronic Configurational Transformation of Network Modifiers in Aluminate Glass above Megabar Pressures

Electronic responses of glasses under extreme pressures differ from those of crystalline analogs. Their distinct electronic environments are found in network formers with well-defined, covalent-bonded coordination environments (e.g., [4] Si and [4] Al) and in network modifiers with more disordered, ionic-bonded configurations (e.g., [5,6,7] Ca). Deciphering the evolution of the bonding environment of network modifier cations upon compression provides atomic insights into the pressure-driven hardening and transport properties of glasses. Despite the importance, in contrast to extensive efforts to uncover how network formers behave under pressure, considerable structural disorder around network modifiers makes it challenging to probe their electronic bonding environments under compression. Our understanding of the evolution of network modifiers above megabars is currently absent. Here, we report a discovery of highly densified electronic configurations of network modifier Ca in aluminate glass under extreme compression via the first inelastic X-ray scattering at the Ca L-edge up to 140 GPa. As evidenced by the prominent pressure-driven increases in electronic dispersion and delocalization, densified calcium environments are characterized by a decreased average Ca–O distance, the formation of highly coordinated calcium, a broader distribution of topological variables, and a greater distortion of Ca polyhedra above megabars. The spectral features for the Ca environments reveal significant electronic and bonding modifications, including pressure-driven increases in the ligand field interaction, the covalence characteristic of the Ca–O bond, and the electron–hole Coulomb interaction. These densification paths identify the electronic adaptation of network modifiers above megabars, shedding light on the origins of enhanced electron transport and the electron-storing capacity of glasses under pressure.

amorphous materials↗

DOE OSTI2025

Pressure‐Induced Metallization and Isostructural Transitions in 3R‐MoS2

At ambient conditions 3R-polytypes of transition metal dichalcogenides (TMDs) demonstrate fascinating properties because of their unique layer stacking. Understanding the structure-property relationship is essential for the realization of their use in spintronic, valleytronic, and optoelectronic applications. Herein, after the high pressure-temperature synthesis of 3R-MoS2 in a large volume cubic press, a concomitant experimental and theoretical high-pressure study of 3R-MoS2 is reported, leading to the discovery of pressure-induced reversible isostructural phase transitions without symmetry breaking. Concurrent with the isostructural transitions, a semiconductor-to-metal transition is observed, owing to strong interlayer interaction and charge redistribution across the van der Waals gap under pressure. The pressure-induced enhancement of interlayer interactions together with the robust intrinsic layer stacking in 3R-MoS2 prevent the layers from sliding under pressure and hinder a corresponding volume collapse. This study on continuous pressure-tuning of crystal and electronic structure in 3R-MoS2 will play a vital role in developing the next-generation devices involving coupling of structural, optical, and electrical properties of 3R-polytypes of TMDs and other layered materials.

Ahmad, Azkar Saeed↗

DOE OSTI2024

Rheology characterization of ionic liquids under high pressure and high temperature

Ionic liquids (ILs) are liquid salts that exist at or below ambient temperatures and are composed of ion pairs. They offer promising alternatives to toxic, hazardous, highly flammable, and volatile solvents in various applications such as solution preparation, dispersion, gel formation, composites, and polymer melts. ILs possess unique and interesting characteristics, including excellent chemical and thermal stability and low vapor pressures. Understanding the rheological properties of ILs is essential to optimizing IL performance. This paper presents a comparative analysis of the rheological properties of two ionic liquids, Nsingle bondHexylpyridinium tetrafluoroborate (HPyBF4) and Nsingle bondHexylpyridinium bromide (HPyBr), under different shear rates, temperatures, and pressures. Rheological measurements were performed under varying controlled pressure and temperature conditions. The experimental investigation covered a pressure range of 689–12,411 kPa [100–1800 psi] and a temperature range from room temperature up to 522 kelvin (K) [480°F]. The primary objective is to explore and compare the flow behavior and viscoelastic characteristics of HPyBF4 and HPyBr under high-pressure and high-temperature conditions. The experimental data showed that HPyBF4 and HPyBr exhibited shear-thinning behavior, and pressure had an insignificant effect on rheology compared to the temperature effect. Under the same testing conditions, HPyBr showed higher shear stress and viscosity than HPyBF4. This research significantly contributes to the improved understanding of the rheological behavior of these specific ionic liquids and their suitability for diverse industrial and scientific applications, particularly in high-pressure and high-temperature environments.

15 GEOTHERMAL ENERGY↗

DOE OSTI2026

Evaluation and optimization of flow boiling frictional pressure drop correlations using the data from traditional and next-generation refrigerants in a micro-fin tube

This study presents an experimental evaluation and optimization of flow boiling frictional pressure drop correlations for conventional and next-generation refrigerants in a horizontal micro-fin tube, with particular emphasis on the newly emerging refrigerant blends R-454C and R-455A, for which pressure-drop data in enhanced tubes remain limited. Experiments were conducted with R-410A, R-454C, R-455A, R-134a, R-1234yf, and R-1234ze(E) in a copper micro-fin tube with an inner diameter of 8.468 mm, over mass fluxes ranging from 100 to 300 kg/(m²·s) depending on the refrigerant, and evaporation temperatures of 7, 12, and 14 °C. Frictional pressure gradients were determined from measured total pressure drops after subtracting acceleration pressure drop, and the resulting database was used to assess four existing models: Kuo and Wang (1996), Cavallini et al. (1997), Goto et al. (2001), and Diani et al. (2014). The measured frictional pressure gradient increased with vapor quality and mass flux for all refrigerants and increased further at lower evaporation temperatures, with the overall trend strongly related to liquid viscosity. Among the four correlations, the Goto et al. (2001) model provided the best overall agreement with the measured data before optimization. To further improve prediction accuracy, the Kuo and Wang (1996) and Goto et al. (2001) models were optimized using the complete experimental database. After optimization, both models reduced the overall mean absolute deviation to below 15%, while the optimized Goto et al. (2001) model maintained the best and most consistent overall performance. The results provide new pressure-drop data for next-generation refrigerants and demonstrate that parameter optimization can significantly enhance the applicability of existing micro-fin-tube correlations.

Hu, Yifeng [ORNL] (ORCID:0000000242875185)↗