SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The pseudoscalar meson light-cone distribution amplitudes (LCDAs) are essential non-perturbative inputs for a range of high-energy exclusive processes in quantum chromodynamics. In this proceedings, progress towards a determination of the low Mellin moments of the pion and kaon LCDAs by the HOPE Collaboration is reported.
Disks of gas accreting onto supermassive black holes may host numerous stellar-mass objects, formed within the disk or captured from a nuclear star cluster. We present a simplified model of stellar evolution in these dense environments, which exhibits exceptional agreement with full stellar evolution calculations at a minuscule fraction of the cost. Although the model presented here is limited to stars burning hydrogen in their cores, it is sufficient to determine the evolutionary fate of disk-embedded stars: whether they proceed to later stages of nuclear burning and leave behind a compact remnant, reach a quasi-steady state where mass loss and accretion balance one another, or whether accretion proceeds faster than stellar structure can adjust, causing a runaway. We highlight how various disk parameters and phenomena such as gap opening affect stellar evolution outcomes. We also highlight how our model can accommodate time-varying conditions, such as those experienced by a star on an eccentric orbit, and can couple to N -body integrations. This model will enable more detailed studies of stellar populations and their interaction with accretion disks than have previously been possible.
Background In 2022, the Office of Science and Technology Policy (OSTP) issued a memo that significantly reshaped the landscape of access to federally funded research. The memo mandated that all taxpayer-funded research be made available to the public without delay upon publication, without an embargo period, superseding the 2013 OSTP public access policy. This public access policy promotes transparency and the democratization of knowledge, ensuring that the fruits of scientific endeavors funded by federal agencies could be immediately accessed and built upon by scientists, educators, students, and the public at large. To implement the requirements of the OSTP guidance and DOE Public Access Plan, the Office of Nuclear Energy (NE) has implemented public access plan guidance and has identified several areas where better data management practices would further expand public access to important nuclear energy related scientific data, reports, and other technical products. Significant NE supported efforts are already underway for data management and public access to important nuclear energy related data.1 2 To address gaps in data management practices, and improve retention and accessibility of data, NE is actively exploring enhanced data management options utilizing its high-performance computing resources administered by its Nuclear Scientific User Facility Program. A newly piloted system, the Nuclear Research Data System (NRDS) acts as a portal for data collection and dissemination. Nuclear Energy University Program Research and Development Portfolio According to Web of Science, NEUP has produced 2,345 journal publication that have been cited more than 61,000 times3 and countless conference proceedings. These publications are publicly available through OSTI.gov and in the open literature. Additional scientific and technical products including project milestones that are not publications and NEUP project final reports are vetted through OSTI.gov and released once reviewed and approved by DOE. Since 2009, NEUP has awarded close to 1,000 different R&D projects in technical areas across the NE research programs. As of June 2023, 512 NEUP reports are publicly available on OSTI. The underlying data for projects is still held at universities, and data transfer, co-location, and dissemination has not occurred in a systematic way. NEUP data is currently accessible through myriad university-based data repositories, or through direct requests to PIs. The program identified this patchwork of repositories, or often lack of publicly available data, as a significant barrier to an organized, accessible, and comprehensive solution to sharing data with the larger nuclear energy community. Approach The goal of this pilot project is to establish a pathway to a consolidated long-term repository for NEUP project data. To accomplish this goal, the pilot strives to accomplish the following objectives: Establish data collection standards, including a standard set of required supplementary information to contextualize and support raw data files. Work with the HPC group collect and upload information and to modify the NRDS system, as needed, to support a standardized approach. Resolve potential barriers to successful roll out of an expanded data collection strategy, including modifying data management plan guidelines and establishing a document and data release process that accounts for potential intellectual property and/or export control concerns. Results Overall, the pilot was successful in collecting 8,982 raw and processes data files, 220 reports, 56 calibration files, and 5,931 other supplementary documents. Supplementary documents included experimental plans, methods, journal publications and conference proceedings, milestone reports, and final reports. Figure 2 shows the number of data sets and supplementary project information provided by each project. Projects has significantly different input, depending on experimental data produced and completeness of the datasets provided.
Thermochemical energy storage (TCES) offers a transformative approach to address grid instability by harnessing reversible chemical reactions for efficient heat storage and release. Here, we introduce pharmaceutical organic salt hydrates as a class of materials with exceptional performance for low-grade waste heat recovery. We demonstrate ibuprofen sodium dihydrate (ISD) as an example organic hydrate exhibiting a dehydration temperature range of 60-110 °C and a remarkable dehydration enthalpy of up to 59.5 kJ/mol of water, ideally suited for capturing industrial and residential waste heat. Using rigorous multimodal characterization, including thermogravimetric analysis, differential scanning calorimetry, in-situ FTIR, in-situ PXRD, and NMR, we demonstrate ISD's superior thermal, chemical, and structural stability over 150 hydration-dehydration cycles, achieving an unprecedented cycling efficiency of ~99.9%. Compared to conventional inorganic salt hydrates like strontium chloride hexahydrate and calcium oxalate monohydrate, ISD showcases enhanced durability without deliquescence or pulverization, even under high-humidity conditions. In-situ analyses confirm the transition from ISD to ibuprofen sodium anhydrous (ISA) proceeds with structural reorganization, thereby combining the dehydration mechanism with phase transitions, resulting in higher energy storage capacity. Microstructural analyses reveal that repeated water intercalation and structural transitions aid in creating significant porosity that enhances water transport kinetics, further improving the hydration/dehydration performance. By combining the phase change and chemical dehydration mechanisms, ISD paves the way for designing a new class of organic salt hydrates, offering tunable properties to meet diverse thermal energy storage demands and supporting sustainable grid resilience.
Sol–gel synthesis is a wet-chemical processing route for fabricating functional materials with control over composition and microstructure at relatively low temperatures compared to conventional solid-state synthesis. While sol–gel process initiates with intermixed molecular precursors, the early-stage nucleation pathways are insufficiently understood. Here, in this study, the chemical and structural transformation of ion disordered rocksalt (DRX) Li 1.2 Mn 0.4 Ti 0.4 O 2 (LMTO), a promising cathode material for lithium batteries, is studied by multiscale characterizations. In situ heating transmission electron microscopy (TEM) using a liquid cell visualizes and identifies crystallization pathways at the nanoscale. While some regions follow a classical multi-step transition through thermodynamically stable intermediates, others exhibit a kinetic shortcut via a localized amorphous matrix to directly form the DRX structure. Macroscale Fourier transform infrared spectroscopy corroborates the findings and reveals that transition metal ions are more strongly incorporated into the acetate-coordinated network than lithium. Although in situ heating TEM captures diverse local transformation pathways, in situ synchrotron X-ray diffraction indicates that the macroscopic transformation proceeds predominantly through spinel LMTO and lithium titanates toward DRX-LMTO. The findings uncover the spatiotemporal chemical and structural transformations in sol–gel derived DRX-LMTO materials, and call for fine-tuning of such sol–gel chemistries to manipulate the crystallization pathways and achieve target material homogeneity more efficiently.
Abstract The semi‐hydrogenation of acetylene in ethylene‐rich gas streams is a high‐priority industrial chemical reaction for producing polymer‐grade ethylene. Traditional thermocatalytic routes for acetylene reduction to ethylene, despite progress, still require high temperatures and high H 2 consumption, possess relatively low selectivity, and use a noble metal catalyst. Light‐powered strategies are starting to emerge, given that they have the potential to use directly the abundant and sustainable solar irradiation, but are ineffective. Here an efficient, >99.9% selective, visible‐light powered, catalytic conversion of acetylene to ethylene is reported. The catalyst is a homogeneous molecular cobaloxime that operates in tandem with a photosensitizer at room temperature and bypasses the use of non‐environmentally friendly and flammable H 2 gas feed. The reaction proceeds through a cobalt‐hydride intermediate with ≈100% conversion of acetylene under competitive (ethylene co‐feed) conditions after only 50 min, and with no evolution of H 2 or over‐hydrogenation to ethane. The cobaloxime is further incorporated as a linker in a metal–organic framework; the result is a heterogeneous catalyst for the conversion of acetylene under competitive (ethylene co‐feed) conditions that can be recycled up to six times and remains catalytically active for 48 h, before significant loss of performance is observed.
Abstract The introduction of F‐containing groups into organic molecules can significantly alter their physical and chemical properties. Particularly, gem ‐difluoroalkenes serve as versatile precursors for a broad variety of organofluorine compounds, commonly used in agrochemicals, pharmaceuticals, and materials science. Based on the kinetics of H• transfer to acrylamide ( k H = 2.28 × 10 −4 M −1 s −1 at 300 K in toluene), the study describes a nickel‐hydride‐(or Li[BEt 3 H]) initiated hydrocyclization/defluorination of CF 3 ‐substituted acrylamides, offering alternative access to 4‐fluorovinyl‐substituted 2‐pyrrolidones (Seletracetam derivatives that are antiepileptic drug candidates). This process proceeds with high yields and remarkable chemo‐ and regioselectivity. The hydrocyclization/defluorination can be initiated by either H• or H – transfer, followed by a 5‐exo‐trig cyclization and subsequent fluorine elimination. The strategy has been applied in the late‐stage functionalization of drug molecules, providing a valuable tool in the synthesis of pharmaceutical compounds.
Upcycling of recycled LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) cathodes offers an economical route to produce cathode materials with increased energy density (i.e., LiNi 0.8 Mn 0.1 Co 0.1 O 2 , NMC811) that meet the performance needs of present-day electric vehicles. In this work, solid-state upcycling of NMC622 via calcination with Ni(OH) 2 and LiOH was monitored using in situ synchrotron powder X-ray diffraction measurements. Sequential Rietveld refinements indicate that the calcination proceeds by initially converting Ni(OH) 2 to a rocksalt NiO phase followed by lithiation of NiO to form LiNiO 2 (LNO), with both NMC and LNO phases present in nearly equal proportions at the calcination endpoint. Variable-energy transmission X-ray microscopy tomograms of upcycled samples reveal that the NMC and LNO domains are intermixed at sub-micron length scales. Depth-dependent analysis of multi-elemental fitting maps matches the expected NMC811 composition at the secondary particle level and indicates that transition metal diffusion is not limited by the secondary particle size.
Abstract The reduction of CO 2 to synthetic fuels is a valuable strategy for energy storage. However, the formation of energy‐dense liquid fuels such as methanol remains rare, particularly under low‐temperature and low‐pressure conditions that can be coupled to renewable electricity sources via electrochemistry. Here, a multicatalyst system pairing an electrocatalyst with a thermal organometallic catalyst is introduced, which enables the reduction of CO 2 to methanol at ambient temperature and pressure. The cascade methanol synthesis proceeds via CO 2 reduction to formate by electrocatalyst [Cp*Ir(bpy)Cl] + (Cp*=pentamethylcyclopentadienyl, bpy=2,2′‐bipyridine), Fischer esterification of formate to isopropyl formate catalyzed by trifluoromethanesulfonic acid (HOTf), and thermal transfer hydrogenation of isopropyl formate to methanol facilitated by the organometallic catalyst (H‐PNP)Ir(H) 3 (H‐PNP=HN(C 2 H 4 P i Pr 2 ) 2 ). The isopropanol solvent plays several crucial roles: activating formate ion as isopropyl formate, donating hydrogen for the reduction of formate ester to methanol via transfer hydrogenation, and lowering the barrier for transfer hydrogenation through hydrogen bonding interactions. In addition to reporting a method for room‐temperature reduction of challenging ester substrates, this work provides a prototype for pairing electrochemical and thermal organometallic reactions that will guide the design and development of multicatalyst cascades.
Abstract α‐substituted ketones are important chemical targets as synthetic intermediates as well as functionalities in natural products and pharmaceuticals. We report the α‐acetylation of C(sp 3 )−H substrates R−H with arylmethyl ketones ArC(O)Me to provide α‐alkylated ketones ArC(O)CH 2 R at RT with t BuOO t Bu as oxidant via copper(I) ‐diketiminato catalysts. Proceeding via alkyl radicals R•, this method enables α‐substitution with bulky substituents without competing elimination that occurs in more traditional alkylation reactions between enolates and alkyl electrophiles. DFT studies suggest the intermediacy of copper(II) enolates [Cu II ](CH 2 C(O)Ar) that capture alkyl radicals R• to give R−CH 2 C(O)Ar outcompeting dimerization of the copper(II) enolate to give the 1,4‐diketone ArC(O)CH 2 CH 2 C(O)Ar.
Abstract Lewis acids play a central role in a large variety of chemical transformations. The reactivity of the strongest Lewis acids is typically studied in the context of affinity towards hard bases, such as fluoride or oxygenous species. Carbocations can be viewed as soft Lewis acids, possessing significant affinity for softer bases, such as hydride. This work presents the ambient‐temperature isolation of salts of the perfluorotrityl cation ((C 6 F 5 ) 3 C + or F 15 Tr + ) in combination with halogenated carborane anions. The F 15 Tr + cation exhibits remarkable hydride affinity, illustrated by the observation of hydride abstraction from dihydrogen, and of the rapid abstraction of hydride from −CH 2 −groups in alkanes. Theoretical studies support the favorability of hydride abstraction from dihydrogen, and indicate that the hydride abstraction from alkanes proceeds via a concerted hydride transfer process that is sensitive to steric effects.
Abstract Benzoquinone (BQ) is commonly used as a cocatalyst in multi‐component catalyst systems for aerobic oxidation of organic molecules. Such methods often proceed by a redox cascade in which a secondary catalyst supports aerobic oxidation of hydroquinone (HQ) to BQ. The present study shows that a commercially available non‐precious metal heterogeneous catalyst, PAJ‐Fe‐N‐C, is much more efficient than established homogeneous catalysts for aerobic oxidation of HQ to BQ, and this improved reactivity is crucial to support aerobic oxidation of primary alcohols to aldehydes with the homogeneous iridium catalyst, [Ir(trop 2 DAD]OTf (trop 2 DAD= N , N ‐bis(5‐ H ‐dibenzo[ a , d ]cycloheptene‐5‐yl)‐1,4‐diazabuta‐1,3‐diene). The combination of this heterogeneous/homogeneous catalyst system operates with Ir catalyst loadings as low as 0.05 mol % and turnover frequencies ≥350 h −1 .
Here we introduce an electrochemical strategy for the selective and quantitative removal of thiocarbonylthio end groups from polymers prepared by reversible addition–fragmentation chain transfer (RAFT) or photoiniferter polymerization. Our results indicate that applying a cathodic potential in an undivided cell promotes reductive cleavage of the thiocarbonylthio moiety, generating terminal polymer radicals that are efficiently capped with hydrogen atoms in the presence of benign donors. This transformation proceeds cleanly across diverse polymer backbones and end-group chemistries, including trithiocarbonates and dithiobenzoates, without chain coupling or degradation. Moreover, the applied potential can be tuned to enable chemoselective end-group removal in mixed-polymer systems, a level of control inaccessible by thermal, photochemical, or nucleophilic strategies. Beyond delivering colorless and optically transparent materials, electrochemical end-group removal significantly enhances polymer stability. Poly(methyl methacrylate) subjected to electrochemical end-group removal exhibited a T 95 of 342 °C, exceeding the stabilities of analogous polymers with end groups removed by aminolysis (T 95 = 260 °C) or radical-based methods (T 95 = 299 °C). These findings demonstrate redox-directed post-polymerization modification as a tool for designing robust, transparent, and thermally stable macromolecules and establish electrochemistry as a platform strategy in polymer synthesis and processing.
The reduction of CO 2 to synthetic fuels is a valuable strategy for energy storage. However, the formation of energy-dense liquid fuels such as methanol remains rare, particularly under low-temperature and low-pressure conditions that can be coupled to renewable electricity sources via electrochemistry. Here, in this study, a multicatalyst system pairing an electrocatalyst with a thermal organometallic catalyst is introduced, which enables the reduction of CO 2 to methanol at ambient temperature and pressure. The cascade methanol synthesis proceeds via CO 2 reduction to formate by electrocatalyst [Cp*Ir(bpy)Cl] + (Cp*=pentamethylcyclopentadienyl, bpy=2,2'-bipyridine), Fischer esterification of formate to isopropyl formate catalyzed by trifluoromethanesulfonic acid (HOTf), and thermal transfer hydrogenation of isopropyl formate to methanol facilitated by the organometallic catalyst (H-PNP)Ir(H) 3 (H-PNP=HN(C 2 H 4 P i Pr 2 ) 2 ). The isopropanol solvent plays several crucial roles: activating formate ion as isopropyl formate, donating hydrogen for the reduction of formate ester to methanol via transfer hydrogenation, and lowering the barrier for transfer hydrogenation through hydrogen bonding interactions. In addition to reporting a method for room-temperature reduction of challenging ester substrates, this work provides a prototype for pairing electrochemical and thermal organometallic reactions that will guide the design and development of multicatalyst cascades.
Abstract α‐substituted ketones are important chemical targets as synthetic intermediates as well as functionalities in natural products and pharmaceuticals. We report the α‐acetylation of C(sp 3 )−H substrates R−H with arylmethyl ketones ArC(O)Me to provide α‐alkylated ketones ArC(O)CH 2 R at RT with t BuOO t Bu as oxidant via copper(I) ‐diketiminato catalysts. Proceeding via alkyl radicals R•, this method enables α‐substitution with bulky substituents without competing elimination that occurs in more traditional alkylation reactions between enolates and alkyl electrophiles. DFT studies suggest the intermediacy of copper(II) enolates [Cu II ](CH 2 C(O)Ar) that capture alkyl radicals R• to give R−CH 2 C(O)Ar outcompeting dimerization of the copper(II) enolate to give the 1,4‐diketone ArC(O)CH 2 CH 2 C(O)Ar.
Abstract C−H bond activation is the first step in manufacturing chemical products from readily available light alkane feedstock and typically proceeds via carbon‐intensive thermal processes. The ongoing emphasis on decarbonization via electrification motivates low‐temperature electrochemical alternatives that could lead to sustainable chemicals production. Platinum (Pt) electrocatalysts have shown activity towards reacting alkanes; however, little is known about propane electrocatalytic activation and conditions suitable for enabling selective oxidation to valuable products. Herein, we utilize a combination of electrochemical mass spectrometry (ECMS) and density functional theory (DFT) calculations to elucidate the potential dependence of propane activation on Pt electrocatalysts. Results show a strong dependence of adsorption on the applied potential in room‐temperature aqueous acidic electrolyte, with a maximum coverage of propane‐derived adsorbates at 0.30 V vs RHE. Using charge deconvolution and deuterated experiments, the mechanism of adsorption was elucidated, and C 3 H 2 * was determined as the average dehydrogenated propane‐derived adsorbate species. DFT calculations further corroborate these results, showing that the formation of deeply dehydrogenated species is energetically accessible at room temperature. The combined theoretical and experimental findings yield insights for selective activation of paraffinic C−H bonds at room temperature, aqueous conditions—a critical step towards decarbonized chemical manufacturing.
Abstract Lewis acids play a central role in a large variety of chemical transformations. The reactivity of the strongest Lewis acids is typically studied in the context of affinity towards hard bases, such as fluoride or oxygenous species. Carbocations can be viewed as soft Lewis acids, possessing significant affinity for softer bases, such as hydride. This work presents the ambient‐temperature isolation of salts of the perfluorotrityl cation ((C 6 F 5 ) 3 C + or F 15 Tr + ) in combination with halogenated carborane anions. The F 15 Tr + cation exhibits remarkable hydride affinity, illustrated by the observation of hydride abstraction from dihydrogen, and of the rapid abstraction of hydride from −CH 2 −groups in alkanes. Theoretical studies support the favorability of hydride abstraction from dihydrogen, and indicate that the hydride abstraction from alkanes proceeds via a concerted hydride transfer process that is sensitive to steric effects.
Abstract Benzoquinone (BQ) is commonly used as a cocatalyst in multi‐component catalyst systems for aerobic oxidation of organic molecules. Such methods often proceed by a redox cascade in which a secondary catalyst supports aerobic oxidation of hydroquinone (HQ) to BQ. The present study shows that a commercially available non‐precious metal heterogeneous catalyst, PAJ‐Fe‐N‐C, is much more efficient than established homogeneous catalysts for aerobic oxidation of HQ to BQ, and this improved reactivity is crucial to support aerobic oxidation of primary alcohols to aldehydes with the homogeneous iridium catalyst, [Ir(trop 2 DAD]OTf (trop 2 DAD= N , N ‐bis(5‐ H ‐dibenzo[ a , d ]cycloheptene‐5‐yl)‐1,4‐diazabuta‐1,3‐diene). The combination of this heterogeneous/homogeneous catalyst system operates with Ir catalyst loadings as low as 0.05 mol % and turnover frequencies ≥350 h −1 .