Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROTON IMPACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Impact of proton irradiation on conductivity and deep level defects in β-Ga 2 O 3

Single crystalline bulk and epitaxially grown gallium oxide (β–Ga 2 O 3 ) was irradiated by 0.6 and 1.9 MeV protons to doses ranging from 5 × 10 9 to 6 × 10 14 cm -2 in order to study the impact on charge carrier concentration and electrically active defects. Samples irradiated to doses at or above 2 × 10 13 cm -2 showed a complete removal of free charge carriers in their as-irradiated state, whereas little or no influence was observed below doses of 6 × 10 12 cm -2 . From measurements at elevated temperatures, a thermally activated recovery process is seen for the charge carriers, where the activation energy for recovery follow a second-order kinetics with an activation energy of ~1.2 eV. Combining the experimental results with hybrid functional calculations, we propose that the charge carrier removal can be explained by Fermi-level pinning far from the conduction band minimum (CBM) due to gallium interstitials (Ga i ), vacancies (V Ga ), and antisites (Ga O ), while migration and subsequent passivation of V Ga via hydrogen-derived or V O defects may be responsible for the recovery. Following the recovery, deep level transient spectroscopy (DLTS) reveals generation of two deep levels, with energy positions around 0.75 and 1.4 eV below the CBM. Of these two levels, the latter is observed to disappear after the initial DLTS measurements, while the concentration of the former increases. Here, we discuss candidate possibilities and suggest that the origins of these levels are more likely due to a defect complex than an isolated point defect.

36 MATERIALS SCIENCE↗

Electron density dependence of intensity ratio for FeXXII extreme ultraviolet emission lines arising from different ground levels in electron beam ion trap and large helical device

Extreme ultraviolet (EUV) spectra of highly charged iron ions in a wavelength range of 100-300 A have been observed from two different plasma sources of the Tokyo Electron Beam Ion Trap (Tokyo-EBIT) with a monoenergetic electron beam and a Large Helical Device (LHD) with Maxwellian electron energy. The excitation process of the spectral lines is compared between the two plasmas, and it is found that the excitation process for Fe XIX - Fe XXII ions is clearly different. Namely, the EUV emission lines from the EBIT plasma are only dominated by electron impact excitation connected to the ground state, but the excitation mechanism is not so simple in the LHD plasma. The difference in the excitation process is studied by measuring the intensity ratio of EUV emission lines (114.412 A [1s{sup 2}2s2p{sup 2} {sup 2}P{sub 3/2}{yields}1s{sup 2}2s{sup 2}2p {sup 2}P{sub 3/2}]/117.144 A [1s{sup 2}2s2p{sup 2} {sup 2}P{sub 1/2}{yields}1s{sup 2}2s{sup 2}2p {sup 2}P{sub 1/2}]) arising from different ground levels in the Fe XXII ions. The line intensity ratio has an extremely small value of 0.2 in the EBIT plasma with a low beam current of 30 mA and a beam energy of 2 keV, while the ratio varies with the electron density n{sub e} in the LHD plasmas, i.e., 0.35 for n{sub e} = 1 x 10{sup 13} cm{sup -3} and 0.65 for n{sub e} = 4 x 10{sup 13} cm{sup -3}. Here, the electron density of the EBIT plasma is estimated to be smaller than 10{sup 12} cm{sup -3} and the electron temperature of the LHD plasmas is 2 keV. The dependence of the line intensity ratio on the observed electron density is analyzed for both the EBIT and the LHD plasmas using several collisional-radiative (CR) models. The present experimental data can easily be reproduced by the analysis when the thermal proton impact excitation is taken into account. The importance of the proton impact excitation is also experimentally verified by injecting an iron pellet into the LHD plasmas and changing the ratio of the proton density to the electron density.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impact of proton irradiation on 4H-SiC Low Gain Avalanche Detectors (LGADs)

Silicon carbide (SiC) particle detectors have the potential to provide time resolutions and robust performance in extreme environments which exceed that of silicon detectors. In this work 4H-SiC low gain avalanche detectors (LGADs) and complementary PiN diodes were irradiated with 2.5 GeV protons at fluences up to 3.33 × 10 14 p/cm 2 . The electrostatic performance of both irradiated and non-irradiated devices was evaluated using I-V and C-V measurements. Moreover, charge collection measurements using α particles were also conducted. SiC LGADs displayed a loss in rectification, high ON-state resistances >10 10 Ω-cm 2 , and the complete removal of gain when exposed to the highest proton fluence. Additionally, the reductions in capacitance and OFF-state current pointed to compensation of the gain layer as a gain reducing mechanism. The introduction of radiation-induced defects also hinders carrier acceleration, which reduces impact ionization and further gain reduction. LGADs exposed to a fluence of 1 × 10 14 p/cm 2 experienced a partial recovery in gain (originally having a value of ∼ 2) with a value of ∼ 1.65 when applying a bias of 500 V. Charge trapping was also seen in the reduction of charge collection efficiency (CCE) to ∼ 65% for the PiN diode. However, despite the reduction in device performance, the demonstration of a measurable signal after irradiation points to the potential of SiC LGAD detectors for future high energy physics applications.

43 PARTICLE ACCELERATORS↗

The Impact of Protonation on Early Translocation of Anthrax Lethal Factor: Kinetics from Molecular Dynamics Simulations and Milestoning Theory

We report atomically detailed molecular dynamics simulations of the permeation of the lethal factor (LF) N-terminal segment through the anthrax channel. The N-terminal chain is unstructured and leads the permeation process for the LF protein. The simulations were conducted in explicit solvent with milestoning theory, making it possible to extract kinetic information from nanosecond to millisecond time scales. Here, we illustrate that the initial event is strongly influenced by the protonation states of the permeating amino acids. While the N-terminal segment passes easily at high protonation state through the anthrax channel (and the Φ clamp), the initial permeation represents a critical step, which can be irreversible and establishes a hook in the channel mouth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-induced amorphization of a dense coordination polymer and its impact on proton conductivity

The proton conductivity of a dense coordination polymer (CP) was investigated under high-pressure conditions. Impedance measurements under high pressures revealed that the proton conductivity of the CP decreased more than 1000-fold at pressures of 3–7 GPa and that the activation energy for proton conduction almost doubled compared with that at ambient pressure. A synchrotron X-ray study under high pressure identified the amorphization process of the CP during compression, which rationally explains the decrease in conductivity and increase in activation energy. This phenomenon is categorized as reversible pressure-induced amorphization of a dense CP and is regarded as a demonstration of the coupling of the mechanical and electrical properties of a CP.

36 MATERIALS SCIENCE↗

Imaging the Impact of Proton Irradiation on Edge Terminations in Vertical GaN pin Diodes

Devices based on GaN have shown great promise for high power electronics, including their potential use as radiation tolerant components. An important step to realizing high power diodes is the design and implementation of an edge termination to mitigate field crowding, which can lead to premature breakdown. However, little is known about the effects of radiation on edge termination functionality. We experimentally examine the effects of proton irradiation on multiple field ring edge terminations in high power vertical GaN pin diodes using in operando imaging with electron beam induced current (EBIC). We find that exposure to proton irradiation influences field spreading in the edge termination as well as carrier transport near the anode. By using depth-dependent EBIC measurements of hole diffusion length in homoepitaxial n-GaN we demonstrate that the carrier transport effect is due to a reduction in hole diffusion length following proton irradiation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Impact of proton irradiation on dc performance of AlGaN/GaN high electron mobility transistors

The effects of proton irradiation dose on dc characteristics and the reliability of AlGaN/GaN high electron mobility transistors (HEMTs) were investigated. The HEMTs were irradiated with protons at a fixed energy of 5 MeV and doses ranging from 109 to 2 1014 cm-2. For the dc characteristics, there was only minimal degradation of saturation drain current (IDSS), transconductance (gm), electron mobility and sheet carrier concentration at doses below 2 1013 cm-2, while the reduction of these parameters were 15%, 9%, 41% and 16.6%, respectively, at a dose of 2 1014 cm-2. At this same dose condition, increases of 37% in drain breakdown voltage (VBR) and of 45% in critical voltage (Vcri) were observed. The improvement of device reliability was attributed to the modification of the depletion region due to the introduction of a higher density of defects after irradiation at a higher dose.

Liu, L.↗

TH-A-19A-03: Impact of Proton Dose Calculation Method On Delivered Dose to Lung Tumors: Experiments in Thorax Phantom and Planning Study in Patient Cohort

Purpose: Evaluate Monte Carlo (MC) dose calculation and the prediction of the treatment planning system (TPS) in a lung phantom and compare them in a cohort of 20 lung patients treated with protons. Methods: A 2-dimensional array of ionization chambers was used to evaluate the dose across the target in a lung phantom. 20 lung cancer patients on clinical trials were re-simulated using a validated Monte Carlo toolkit (TOPAS) and compared to the TPS. Results: MC increases dose calculation accuracy in lung compared to the clinical TPS significantly and predicts the dose to the target in the phantom within ±2%: the average difference between measured and predicted dose in a plane through the center of the target is 5.6% for the TPS and 1.6% for MC. MC recalculations in patients show a mean dose to the clinical target volume on average 3.4% lower than the TPS, exceeding 5% for small fields. The lower dose correlates significantly with aperture size and the distance of the tumor to the chest wall (Spearman's p=0.0002/0.004). For large tumors MC also predicts consistently higher V{sub 5} and V{sub 10} to the normal lung, due to a wider lateral penumbra, which was also observed experimentally. Critical structures located distal to the target can show large deviations, though this effect is very patient-specific. Conclusion: Advanced dose calculation techniques, such as MC, would improve treatment quality in proton therapy for lung cancer by avoiding systematic overestimation of target dose and underestimation of dose to normal lung. This would increase the accuracy of the relationships between dose and effect, concerning tumor control as well as normal tissue toxicity. As the role of proton therapy in the treatment of lung cancer continues to be evaluated in clinical trials, this is of ever-increasing importance. This work was supported by National Cancer Institute Grant R01CA111590.

60 APPLIED LIFE SCIENCES↗

Ionization of multielectron atoms by fast charged particles.

Using plane waves to describe the incident and scattered particles, and screened hydrogenic and Coulomb functions to describe the atomic electrons before and after ejections, we have calculated the differential and total ionization cross sections of 11 atoms and one ion by electron impact, and ionization of helium by proton impact. The effective charges of the screened hydrogenic functions are fixed by the Hartree-Fock calculations. Calculations have been carried out for the atomic s, p, and d electrons. For low atomic numbers, we find reasonable agreement with the experimental data. For intermediate atomic numbers, we expect our results to overestimate the actual cross sections, since our choice of a unit charge for the Coulomb function of the ejected electrons will overestimate the atomic dipole potential strength, and in turn the high-energy cross sections. The advantage of the method presented here is that the ionization amplitude is given in analytic form. This may allow further analysis on this amplitude, and facilitates extension of the numerical integration for the cross section to high impact energies.

Omidvar, K.↗

Complete Breakup of the Helium Atom by Proton and Antiproton Impact

We present a fully ab initio, nonperturbative, time-dependent approach to describe single and double ionization of helium by proton and antiproton impact. The problem is discretized by a flexible finite-element discrete-variable representation on the radial grid. Good agreement with the most recent experimental data for absolute angle-integrated cross sections is obtained for projectile energies between 3 keV and 6 MeV. Also, angle-differential cross sections for two-electron ejection are predicted for a proton impact energy of 6 MeV. The time evaluation of the ionization process is portrayed by displaying the electron density as a function of the projectile location.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Proton-Coupled Defects Impact O–H Bond Dissociation Free Energies on Metal Oxide Surfaces

Proton-coupled electron transfer (PCET) reactions on metal oxides require coupling between proton transfer at the solid-liquid interface and electron transfer involving defects at or near the band edge. Herein, hybrid functional periodic density functional theory is used to elucidate the impact of proton-coupled defects on the bond dissociation free energies (BDFEs) of O-H bonds on anatase TiO 2 surfaces. These O-H BDFEs are directly related to interfacial PCET thermochemistry. Comparison between geometrically similar O-H bonds associated with different defect types, namely conduction d-band electrons or valence p-band holes, reveals that the BDFEs differ by ~81 kcal/mol (3.50 eV), comparable to the wide TiO 2 band gap. These differences are shown to be determined primarily by differences in electron transfer driving forces, which are analyzed by using band energies and inner-sphere reorganization energies within a Marcus theory framework. Furthermore, these fundamental insights about the impact of proton-coupled defects on PCET thermochemistry at semiconductor surfaces have broad implications for electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced proton acceleration in an applied longitudinal magnetic field

Using two-dimensional particle-in-cell simulations, we examine how an externally applied strong magnetic field impacts proton acceleration in laser-irradiated solid-density targets. We find that a kT-level external magnetic field can sufficiently inhibit transverse transport of hot electrons in a flat laser-irradiated target. While the electron heating by the laser remains mostly unaffected, the reduced electron transport during proton acceleration leads to an enhancement of maximum proton energies and the overall number of energetic protons. The resulting proton beam is much better collimated compared to a beam generated without applying a kT-level magnetic field. A factor of three enhancement of the laser energy conversion efficiency into multi-MeV protons is another effect of the magnetic field. The required kT-level magnetic fields are becoming feasible due to a significant progress that has been made in generating magnetic fields with laser-driven coils using ns-long laser pulses. The possibility of improving characteristics of laser-driven proton beams using such fields is a strong motivation for further development of laser-driven magnetic field capabilities.

43 PARTICLE ACCELERATORS↗

Proton dynamics in water confined at the interface of the graphene–MXene heterostructure

Heterostructures of 2D materials offer a fertile ground to study ion transport and charge storage. Here, we use ab initio molecular dynamics to examine the proton-transfer/diffusion and redox behavior in a water layer confined in the graphene-Ti 3 C 2 O 2 heterostructure. We find that in comparison with the similar interface of water confined between Ti 3 C 2 O 2 layers, the proton redox rate in the dissimilar interface of graphene-Ti 3 C 2 O 2 is much higher, owing to the very different interfacial structure as well as the interfacial electric field induced by an electron transfer in the latter. Water molecules in the dissimilar interface of the graphene-Ti 3 C 2 O 2 heterostructure form a denser hydrogen-bond network with a preferred orientation of water molecules, leading to an increase in proton mobility with proton concentration in the graphene-Ti 3 C 2 O 2 interface. As the proton concentration further increases, proton mobility decreases due to increasingly more frequent surface redox events that slow down proton mobility due to binding with surface O atoms. Our work provides important insights into how the dissimilar interface and their associated interfacial structure and properties impact proton transfer and redox in the confined space.

2D materials↗

The Chemical Behavior and Degradation Mitigation Effect of Cerium Oxide Nanoparticles in Perfluorosulfonic Acid Polymer Electrolyte Membranes

Perfluorosulfonic acid membranes, the polymer of choice for polymer electrolyte hydrogen fuel cells, are susceptible to degradation due to attacks on polymer chains from radicals. Mitigation of this attack by cerium-based radical scavengers is an approach that has shown promise. In this work, two formulations of single-crystal cerium oxide nanoparticles, with an order of magnitude difference in particle size, are incorporated into said membranes and subjected to proton conductivity measurements and ex-situ durability tests. We found that ceria is reduced to Ce(III) ions in the acidic environment of a heated, humidified membrane which negatively impacts proton conductivity. In liquid and gas Fenton testing, fluoride emission is reduced by an order of magnitude, drastically increasing membrane longevity. Side-product analysis demonstrated that in the liquid Fenton test, the main point of attack are weak polymer end groups, while in the gas Fenton test, there is additional side-chain attack. Both mechanisms are mitigated by the addition of the ceria nanoparticles, whereby the extent of the durability improvement is found to be independent of particle size.

Pearman, Benjamin P↗

Analysis of the approximations applied in the continuum-distorted-wave-eikonal-initial-state theory for the evaluation of ionization cross sections: Post-prior discrepancy, axial symmetry, and ion-ion interaction

When the continuum distorted wave with eikonal initial state (CDW-EIS) [D. S. Crothers and J. F. McCann, J. Phys B 16, 3229 (1983)] theory is applied to the evaluation of ionization cross sections, many additional approximations are assumed. However, usually, the influence of these approximations is not clear. Aiming to estimate them, we compare the differential and total cross sections obtained with diverse approximations for ionization of He atoms by proton impact. We analyze the post-prior discrepancy, which depends on the perturbative Hamiltonian applied in the scattering amplitude. We study the dependence of the cross sections on the description of the initial and final states. For this purpose, we use the 1Z and 5Z variational and numerical Optimized Potential Model (OPM) [J. D. Talman, Comput. Phys. Commun. 54, 85 (1989)] bound states for the initial target state, and for the final target state we set Coulomb waves with proper effective charges or the continuum state of an OPM potential model. The cross sections resulting from OPM post and prior versions are identical and show excellent agreement with experimental data in each case. Nevertheless, the cross section derived by the prior CDW-EIS, 5Z initial wave, and corresponding continuum state gives comparable results, requiring shorter computational work. Then we study the determination of the impact parameter ionization probability from the transition amplitudes, also including an axial symmetry for the ionization process. The hypothesis of this axial symmetry saves an angular integration in the evaluation of the probabilities. We analyze the variation of these probabilities within the post and prior formalisms and mention initial and final states, according to the supposed symmetry. We found that the probabilities derived with the axial symmetry concentrate at a lower impact parameter than the usual ones and are quite sensitive to the approximations used for the CDW-EIS evaluation. Furthermore, these probabilities underestimate distant collisions. In the last section we introduce the projectile-residual ion potential, and we discuss the effect of the diverse approximations on the dependence of the cross section as a function of the projectile scattering angle. We compare the projectile angular distribution resulting from a full Coulomb interaction between the ions with the one obtained by a screened potential, but in the latter case the theoretical distributions underestimate the experimental data. The OPM and 5Z functions give a good description of the experimental data.

74 ATOMIC AND MOLECULAR PHYSICS↗

High velocity proton collision with liquid lithium: a time dependent density functional theory study

Liquid lithium is often used as a coating material in fusion reaction chambers, where it is under constant bombardment from high speed neutrons and protons. However, numerous fundamental questions are unanswered, for example whether a single proton impact can cause Li atom sputtering, and what is the electron excitation energy profile after a collision particularly for extremely high energy projectiles. Herein, we use a real-time dependent density functional method to study these questions for proton energies in the range of 30 eV to 1 MeV. The calculated stopping power agrees well with experiment, and it is found that the stopping power cannot be described by the single electron exciting spectrum based on the adiabatic eigen energies, and Li atom sputtering is not observed within our simulation time.

Bi, Gang↗