Search NASA⌕ Search

SEARCH · Search NASA

Results for “PT symmetry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A comprehensive ARPES study on the type-II Dirac semimetal candidate Ir 1-x Pt x Te 2

The transition metal dichalcogenide Ir 1-x Pt x Te 2 displays both superconductivity and a topological band structure. Using angle-resolved photoemission spectroscopy, we obtain a comprehensive understanding of the three-dimensional electronic structure in the normal state of Ir 1-x Pt x Te 2 for doping levels from x = 0.1 to 0.4, which spans the composition range of a superconducting state to a non-superconducting state. Many features of the electronic structure can be attributed to strong Te–Te interactions between the layers of the layered crystal structure and can be resolved by photon energy dependent measurements. We demonstrate that the type-II Dirac fermions can be successfully tuned via Pt doping, where the Dirac point lies close to the Fermi level for x = 0.1. The band evolution vs doping provides a clearer understanding of the relationship between the superconductivity and electronic structure. In addition, the β band in the superconducting samples locates the system close to a type-II van Hove singularity, where spin triplet paring symmetry has been predicted. Our results provide a comprehensive understanding of the band structure of Ir 1-x Pt x Te 2 , and we discuss the possibilities of the existence of topological superconductivity in this system.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Microscopic piezoelectric behavior of clamped and membrane (001) PMN-30PT thin films

Bulk single-crystal relaxor-ferroelectrics, like Pb(Mg 1/3 Nb 2/3 )O- 3 -PbTiO 3 (PMN-PT), are widely known for their large piezoelectricity. This is attributed to polarization rotation, which is facilitated by the presence of various crystal symmetries for compositions near a morphotropic phase boundary. Relaxor-ferroelectric thin films, which are necessary for low-voltage applications, suffer a reduction in their piezoelectric response due to clamping by the passive substrate. To understand the microscopic behavior of this adverse phenomenon, we employ the AC electric field driven in-operando synchrotron x-ray diffraction on patterned device structures to investigate the piezoelectric domain behavior under an electric field for both a clamped (001) PMN-PT thin film on Si and a (001) PMN-PT membrane released from its substrate. In the clamped film, the substrate inhibits the field-induced rhombohedral (R) to tetragonal (T) phase transition resulting in a reversible R to Monoclinic (M) transition with a reduced longitudinal piezoelectric coefficient d 33 < 100 pm/V. Releasing the film from the substrate results in recovery of the R to T transition and results in a d 33 > 1000 pm/V. Here, using diffraction with spatial mapping, we find that lateral constraints imposed by the boundary between the active and inactive materials also inhibit the R to T transition. Phase-field calculations on both clamped and released PMN-PT thin films simulate our experimental findings. Resolving the suppression of thin film piezoelectric response is critical to their application in piezo-driven technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A computational study of Al n - and Al n -1 1Pt - clusters: the effects of doping and a uniform tuning gauge for single-atom nanocatalysts

Results of density functional theory calculations on Al n - and Al n -1 1Pt - , n = 2-8, clusters are presented and analyzed. The analysis includes different structural forms of the clusters characterized in terms of binding energy, spin and symmetry, and a comparative evaluation of various properties of the two systems viewed as connected through a single-Pt substitutional doping and examined in terms of their respective most stable structures. Furthermore, the Al n -1 1Pt - clusters are then used as a paradigmatic (model) case of single-atom nanocatalysts, with Pt as the catalytic center and Al n-1 as its support, to implement a uniform descriptor for gauging the tuning effects of all the parameters ( "knobs ") of a nanocatalyst that include the identity of the active center and the material and size of its support.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Ground state of Ce 3 Bi 4 Pd 3 unraveled by hydrostatic pressure

Noncentrosymmetric Ce 3 Bi 4 Pd 3 has attracted a lot of attention as a candidate for strongly correlated topological material, yet its experimental ground state remains a matter of contention. Two conflicting scenarios have emerged from a comparison to the prototypical Kondo insulator Ce 3 Bi 4 Pd 3 : Either Ce 3 Bi 4 Pd 3 is a spin-orbit-driven topological semimetal or a Kondo insulator with smaller Kondo coupling than its Pt counterpart. Here, we determine the ground state of Ce 3 Bi 4 Pd 3 via electrical resistivity measurements under hydrostatic pressure, which is a clean symmetry-preserving tuning parameter that increases hybridization but virtually preserves spin-orbit coupling. Ce 3 Bi 4 Pd 3 becomes more insulating under pressures up to 2.3 GPa, which is a signature of Ce-based Kondo insulating materials in the considered pressure range. Its small zero-pressure gap increases quadratically with pressure, similar to the behavior observed in the series Ce 3 Bi 4 (Pt 1 - x Pd x ) 3 , which indicates that Pt substitution and applied pressure have a similar effect. Finally, our result not only demonstrates that Kondo coupling, rather than spin-orbit coupling, is the main tuning parameter in this class of materials, but it also establishes that Ce 3 Bi 4 Pd 3 has a narrow-gap Kondo insulating ground state.

36 MATERIALS SCIENCE↗
NASA NTRS2016

A Piezoelectric Shear Stress Sensor

In this paper, a piezoelectric sensor with a floating element was developed for shear stress measurement. The piezoelectric sensor was designed to detect the pure shear stress suppressing effects of normal stress generated from the vortex lift-up by applying opposite poling vectors to the: piezoelectric elements. The sensor was first calibrated in the lab by applying shear forces and it showed high sensitivity to shear stress (=91.3 +/- 2.1 pC/Pa) due to the high piezoelectric coefficients of PMN-33%PT (d31=-1330 pC/N). The sensor also showed almost no sensitivity to normal stress (less than 1.2 pC/Pa) because of the electromechanical symmetry of the device. The usable frequency range of the sensor is 0-800 Hz. Keywords: Piezoelectric sensor, shear stress, floating element, electromechanical symmetry

Kim, Taeyang↗
DOE OSTI2025

Suppressing trapped-electron-mode-driven turbulence via optimization of three-dimensional shaping

Abstract Turbulent transport driven by trapped electron modes (TEMs) is believed to drive significant heat and particle transport in quasihelically symmetric stellarators. Two three-dimensionally-shaped magnetic configurations with suppressed TEM-driven turbulence were generated through optimization that targeted quasihelical symmetry and the available energy of trapped electrons. Initial equilibria have flux surface shapes with a helically rotating negative triangularity (NT) and positive triangularity (PT). In gyrokinetic simulations, TEMs are suppressed in the reduced-TEM NT and PT configurations, showing that NT does not have the same beneficial turbulence properties over PT as seen in tokamaks. Heat fluxes from TEMs are also suppressed. Without temperature gradients and with a strong density gradient, the most unstable modes at low k y were consistent with toroidal universal instabilities (UIs) in the NT case and slab UIs in the PT case. Nonlinear simulations show that UIs drive substantial heat flux in both the NT and PT configurations. A moderate increase in β halves the heat flux in the NT configuration, while suppressing the heat flux in the PT geometry. Based on the present work, future optimizations aimed at reducing electrostatic drift wave-driven turbulent transport will need to consider UIs if β is sufficiently small.

Duff, J. M. (ORCID:0000000153086694)↗
DOE OSTI2020

Experimental observation of magnetic dimers in diluted Yb:YAlO 3

In this paper, we present a comprehensive experimental investigation of Yb magnetic dimers in Yb 0.04 Y 0.96 AlO 3 , an Yb-doped yttrium aluminum perovskite YAlO3, by means of specific heat, magnetization, and high-resolution inelastic neutron scattering (INS) measurements. In our sample, the Yb ions are randomly distributed over the lattice and ~7% of Yb ions form quantum dimers due to nearest-neighbor antiferromagnetic coupling along the c axis. At zero field, the dimer formation manifests itself in an appearance of an inelastic peak at Δ ≈ 0.2 meV in the INS spectrum and a Schottky-like anomaly in the specific heat. The structure factor of the INS peak exhibits a cosine modulation along the $L$ direction, in agreement with the $c$-axis nearest-neighbor intradimer coupling. A careful fitting of the low-temperature specific heat shows that the excited state is a degenerate triplet, which indicates a surprisingly small anisotropy of the effective Yb-Yb exchange interaction despite the low crystal symmetry and anisotropic magnetic dipole contribution, in agreement with previous reports for the Yb parent compound, YbAlO 3 , and in contrast to Yb 2 Pt 2 Pb. The obtained results are precisely reproduced by analytical calculations for the Yb dimers.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Description of the multinucleon transfer mechanism for Ca 48 + Pu 244 and Kr 86 + Pt 198 reactions in a quantal transport approach

Multinucleon transfer (MNT) reactions involving heavy projectile and target combinations stand as a promising method for synthesizing new neutron-rich exotic nuclei, which may not be possible using hot or cold fusion reactions or fragmentation. Exploring the mechanisms behind MNT reactions is essential and it requires a comprehensive theoretical framework that can explain the physical observables in these reactions. This work aims to show that the quantal diffusion approach based on the stochastic mean-field (SMF) theory is capable of explaining the reaction dynamics observed in MNT reactions. Primary product mass distributions in 48 Ca + 244 Pu reaction at E c.m. = 203.2 MeV and 86 Kr + 198 Pt reaction at E c.m. = 324.2 MeV are calculated and compared with the available experimental data. In this work, we utilize the time-dependent Hartree-Fock (TDHF) calculations to analyze the mean-field reaction dynamics computationally in the reactions 48 Ca + 244 Pu and 86 Kr + 198 Pt for a broad range of initial angular momenta. Quantal transport description based on the SMF approach is used to calculate quantal diffusion coefficients and mass variances in 48 Ca + 244 Pu and 86 Kr + 198 Pt systems. The primary products arising from quasifission reactions are described by joint probability distribution in the SMF approach and those arising from fusion-fission are estimated by using the statistical deexcitation code gemini + +. Mean values of charge and mass numbers, scattering angles of the primary reaction products, and the total kinetic energies after the collision are calculated within the TDHF framework for a broad range of initial angular momenta. Throughout all the collisions, drift toward the mass symmetry and large mass dispersion associated with this drift are observed. Here, the calculated primary fragment and mass distributions using the SMF approach successfully explain experimental observations for the 48 Ca + 244 Pu and 86 Kr + 198 Pt systems. The primary mass distributions, mean values of binary products, and mass dispersions are determined and results are compared with the available experimental data. The observed agreement between the experimental data and SMF results highlights the effectiveness of the quantal diffusion mechanism based on the SMF approach, which does not include any adjustable parameters other than standard parameters of Skyrme energy density functional.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

In-situ to ex-situ in-plane structure evolution of stern layers on Pt(111) surface: Surface X-ray scattering studies

Here, in-situ to ex-situ evolution of the Cs + in-plane structure in electrochemical Stern layers are investigated on Pt(111) surface with surface X-ray scattering studies. The Cs + single-sublattice (2 x 2) structure of the Stern layer formed in situ in 0.1 M CsF electrolyte evolves eventually to the two-sublattice (2 x 2) structure upon emersion from the electrolyte. While the Cs+ layers maintain the (2 x 2) symmetry, the ex situ layer increases the density progressively over several minutes by incorporating Cs + ions of the electrolyte during the emersion process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Graph theory approach to determine configurations of multidentate and high coverage adsorbates for heterogeneous catalysis

Abstract Heterogeneous catalysts constitute a crucial component of many industrial processes, and to gain an understanding of the atomic-scale features of such catalysts, ab initio density functional theory is widely employed. Recently, growing computational power has permitted the extension of such studies to complex reaction networks involving either high adsorbate coverages or multidentate adsorbates, which bind to the surface through multiple atoms. Describing all possible adsorbate configurations for such systems, however, is often not possible based on chemical intuition alone. To systematically treat such complexities, we present a generalized Python-based graph theory approach to convert atomic scale models into undirected graph representations. These representations, when combined with workflows such as evolutionary algorithms, can systematically generate high coverage adsorbate models and classify unique minimum energy multidentate adsorbate configurations for surfaces of low symmetry, including multi-elemental alloy surfaces, steps, and kinks. Two case studies are presented which demonstrate these capabilities; first, an analysis of a coverage-dependent phase diagram of absorbate NO on the Pt 3 Sn(111) terrace surface, and second, an investigation of adsorption energies, together with identifying unique minimum energy configurations, for the reaction intermediate propyne (CHCCH 3 *) adsorbed on a PdIn(021) step surface. The evolutionary algorithm approach reproduces high coverage configurations of NO on Pt 3 Sn(111) using only 15% of the number of simulations required for a brute force approach. Furthermore, the screening of potentially hundreds of multidentate adsorbates is shown to be possible without human intervention. The strategy presented is quite general and can be applied to a spectrum of complex atomic systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Monolayer Plasmonic Nanoframes as Large‐Area, Broadband Metasurface Absorbers

Abstract Broadband absorbers are useful ultraviolet protection, energy harvesting, sensing, and thermal imaging. The thinner these structures are, the more device‐relevant they become. However, it is difficult to synthesize ultrathin absorbers in a scalable and straightforward manner. A general and straightforward synthetic strategy for preparing ultrathin, broadband metasurface absorbers that do not rely on cumbersome lithographic steps is reported. These materials are prepared through the surface‐assembly of plasmonic octahedral nanoframes (NFs) into large‐area ordered monolayers via drop‐casting with subsequent air‐drying at room temperature. This strategy is used to produce three types of ultrathin broadband absorbers with thicknesses of ≈200 nm and different lattice symmetries (loose hexagonal, twisted hexagonal, dense hexagonal), all of which exhibit efficient light absorption (≈90%) across wavelengths ranging from 400–800 nm. Their broadband absorption is attributed to the hollow morphologies of the NFs, the incorporation of a high‐loss material (i.e., Pt), and the strong field enhancement resulting from surface assembly. The broadband absorption is found to be polarization‐independent and maintained for a wide range of incidence angles (±45°). The ability to design and fabricate broadband metasurface absorbers using this high‐throughput surface‐based assembly strategy is a significant step toward the large‐scale, rapid manufacturing of nanophotonic structures and devices.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Supramolecular Assembly of Multielement Ribbon-like Structures Derived from Halide Perovskites

Halide perovskites are crucial materials with broad applications owing to their exceptional optoelectronic properties. Vacancy-ordered double perovskites, featuring highly tunable transition metal sites, enable controllable optoelectronic properties through multielement compositional design. Here, in this study, we introduced 18-crown-6 into the vacancy-ordered double perovskites system and developed two-dimensional ribbon-like single crystals (18C6@K) 2 {PtSnTeIrRe} 1 Cl 6 via an antisolvent supramolecular assembly method, demonstrating morphology modulation through multielement composition design. The crystals crystallize in the centrosymmetric space group $P\bar{1}$. The dumbbell-shaped structural units (crown ether@A)2MX6 pack along a and b axes to form a 2-dimensional (2D) monolayer, and these monolayers further stack along the c axis to generate the ribbon-like single crystals. Energy-dispersive X-ray spectroscopy (EDX) qualitatively confirmed the uniform distribution of the five transition metals throughout the crystal, while inductively coupled plasma atomic emission spectroscopy (ICP–AES) quantitatively verified their atomic ratios. We further investigated the origin of the morphology, distinct from the previously reported cube-like single crystals with the $R\bar{3}$ space group. When acetonitrile was used as the solvent, three-dimensional crystals with $R\bar{3}$ symmetry were obtained, whereas dimethylformamide (DMF) was essential for forming two-dimensional ribbon-like single crystals. The essential role of DMF could be ascribed to its capability to maintain a higher concentration of the building blocks. Moreover, Ir 4+ and Pt 4+ cations also played critical roles in inducing the two-dimensional ribbon-like morphology. The three-element (18C6@K) 2 {PtSnTe}1Cl 6 single crystals exhibited bright yellow emission under 375 nm laser excitation, demonstrating the tunability of optoelectronic properties of this class of material.

Zhu, Heqing [University of California, Berkeley, C↗
DOE OSTI2021

Applications of Strain-Coupled Magnetoelectric Composites

This article deals with research, development and future directions of magnetoelectric composites for practical devices applications. In the past 20 years there has been a surge of research in the area of multiferroics (MF) and magnetoelectrics (ME) due to their potential to replace existing technologies based only on ferroelectric or ferromagnetic materials. Some of the magnetoelectric composites show exceptionally high potential in the area of magnetic field sensors, however, work remains before commercialization can be realized. The cross coupling among various ferroic parameters in magnetoelectric composites is several orders higher than single phase magetoelectrics, which make its favorable for low detection (nT or pT) magnetic field sensors. Advances in both layered structures or controlled three-dimensional matrix composites for applications as magnetoelectric nonvolatile memory elements are both required. Robust cross-coupling among various parameters with more than four logic states and its compatibility with complementary-symmetry metal–oxide–semiconductor (CMOS) technology are the main requirements for heterostructure magnetoelectric thin films. The major hurdles in the area of magnetoelectric nonvolatile memory elements are poor interfacial properties and weak magnetoelectric coupling for high density fast read and write processes. Another potential area is strained coupled magneto-electric composites where magnetostriction mediated dimensional change in the magnetic layer effectively modulate the change in the dimension of piezoelectric layers via piezostriction, which leads to a strong ME coupling where their coupling magnitude is sufficient for magnetic field sensors. Energy harvesters based on magnetoelectric composites are also intriguing concepts to capture various types of waste energy, in the form mechanical vibration, pressure, wind energy, hydrothermal and waste temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nanoscale morphological evolution of monocrystalline Pt surfaces during cathodic corrosion

This paper studies the cathodic corrosion of a spherical single crystal of platinum in an aqueous alkaline electrolyte, to map out the detailed facet dependence of the corrosion structures forming during this still largely unexplored electrochemical phenomenon. We find that anisotropic corrosion of the platinum electrode takes place in different stages. Initially, corrosion etch pits are formed, which reflect the local symmetry of the surface: square pits on (100) facets, triangular pits on (111) facets, and rectangular pits on (110) facets. We hypothesize that these etch pits are formed through a ternary metal hydride corrosion intermediate. In contrast to anodic corrosion, the (111) facet corrodes the fastest, and the (110) facet corrodes the slowest. For cathodic corrosion on the (100) facet and on higher-index surfaces close to the (100) plane, the etch pit destabilizes in a second growth stage, by etching faster in the (111) direction, leading to arms in the etch pit, yielding a concave octagon-shaped pit. In a third growth stage, these arms develop side arms, leading to a structure that strongly resembles a self-similar diffusion-limited growth pattern, with strongly preferred growth directions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Spin orbit torque in ferromagnet/topological-quantum-material heterostructures

The main objective of this proposal was to investigate the spin-orbital driven phenomena in topological insulator (TI)/ferromagnet (FM) or transition metal (TM) heterostructures. In particularly, we tried to utilize the spin-momentum locking properties on the surface of TIs to achieve ideal spin-orbit torques (SOTs). In practice, we found that the surface properties have been greatly modified, resulting in much more complicated magneto-transport behaviors than what is expected in SOT-driven magnetotransport. Through systematic and extended investigations, we start to unravel that the nonlinear magnetotransport properties, which was, in the past, mainly attributed to SOT-driven phenomena, can be used to infer the modification of the electronic band structures of TIs and spin textures in FMs which are closely related with charge-spin interconversion phenomena. Regarding the band structures In TIs, we find under electrostatic perturbations imposed by deposition of nonmagnetic TMs, the quantum well states formed on the surface of TIs develop substantial Rashba spin-splitting, which is detected as a bilinear magnetoresistance (BMR). Under magnetic perturbations, the nonlinear planar Hall effect (NPHE) in the topological surface states is greatly enhanced, possibly reflecting the modified surface band structure due to time-reversal symmetry breaking. In a double HM/FM heterostructure where the magnetic anisotropy can be robustly tuned, we observed second-harmonic Hall voltage responses corresponding to domain wall structures with fixed chirality, stabilized by interfacial Dzyaloshinskii–Moriya interaction (DMI). In addition, in the linear transport regime, we utilized inverse-SHE-induced anomalous Hall effect in Pt to probe the exchange bias on the surface of a doped magnetic insulator Tm 3 Fe 5 O 12 .

36 MATERIALS SCIENCE↗
DOE OSTI2019

Phononic Helical Nodal Lines with PT Protection in MoB 2

While condensed matter systems host both fermionic and bosonic quasiparticles, reliably predicting and empirically verifying topological states is only mature for Fermionic electronic structures, leaving topological Bosonic excitations sporadically explored. This is unfortunate, as Bosonic systems such as phonons offer the opportunity to assess spinless band structures where nodal lines can be realized without invoking special additional symetries to protect against spin-orbit coupling. Here we combine first-principles calculations and meV-resolution inelastic x-ray scattering to demonstrate the first realization of parity-time reversal symmetry protected helical nodal lines in the phonon spectrum of MoB 2 . This structure is unique to phononic systems as the spin-orbit coupling present in electronic systems tends to lift the degeneracy away from high-symmetry locations. Our study establishes a protocol to accurately identify topological Bosonic excitations, opening a new route to explore exotic topological states in crystalline materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Tailoring activity of iron phthalocyanine by edge-nitrogen sites induced electronic delocalization

Fe-N-C catalysts have been recognized as the most satisfactory candidates alternatively to Pt-based catalysts for oxygen reduction reaction (ORR). However, fine-tailoring of their intrinsic ORR catalytic activity still remains a great challenge due to the inferior accessibility and intrinsic activity of FeN x moieties. Herein, one order of magnitude activity enhancement of pristine Fe-N-C through cooperating with nitrogen-doped carbon micro-flower is achieved. The axial coordination effect between Fe active center and nitrogen atoms in support can break the electronic distribution symmetry of FeN x moieties and induce the electron delocalization on Fe active center and the electron localization on N, respectively, which favor the adsorption behavior of *OH intermediate. As a result, the catalyst exhibits a remarkable half-wave potential of 0.9 V and a high kinetic current density of 74.04 mA cm -2 at 0.85 V. In addition, when utilized as a cathode catalyst of liquid Zn-air batteries (ZABs), it possesses excellent electrochemical performance, for example, a high open circuit voltage (OCV) and peak power density of 1.59 V and 170.09 mW cm -2 , respectively. In conclusion, this work provides a new understanding into the activity enhancement mechanism of Fe-N-C catalysts, and inspires electronic delocalization of active sites for adjusting catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The [M 6 (S 2 C 2 Ph 2 ) 6 ] (M = Ni, Pd, Pt) Series: Multielectron Reservoirs That Sustain Ligand-Based Oxidations and Metal-Based Reductions

A complete [M 6 (S 2 C 2 R 2 ) 6 ] series (M = Ni (1), Pd (2), Pt (3); R = Ph), the rarest variety among homoleptic dithiolene transition-metal compounds, has been prepared by reaction between [M(S 2 C 2 Ph 2 ) 2 ] and a M 0 source. The platinum member of this set is the first of its type. Diffraction-quality crystals, grown with high reproducibility by evaporation from PhNO 2 solutions, reveal fully reduced [Ph 2 C 2 S 2 ] 2– dianions and an octahedral M 6 core that is reduced to C 2 symmetry by the fusion of a mononuclear D 2h [M(S 2 C 2 Ph 2 ) 2 ] fragment upon a C 4 -symmetric base. The [Ni 6 (S 2 C 2 Ph 2 ) 2 ] 1– monoanion, prepared by Cp* 2 Co reduction, shows only modest structural differences from its neutral counterpart. In CH 2 Cl 2 , 1 and 2 can undergo two reductions and an oxidation, while 3 sustains two reductions and two oxidations. In benzonitrile, 1 sustains three reversible oxidations at potentials that are shifted appreciably to less positive values. The cathodic processes are shown by density functional theory (DFT) calculations to involve an MO largely of metal–sulfur composition that has contributions throughout the C 4 -symmetric pentametallic base of the assembly, while the oxidations are largely ligand-based and confined to the monometallic [M(S 2 C 2 Ph 2 ) 2 ] cap. The absorption spectra are marked by multiple overlapping bands that produce a continuous, tapering absorption profile of unresolved shoulders and swells.

Ligands↗