SEARCH · Search NASA

Results for “Particle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Large eddy simulation of a pressurized reactive fluid–particle system: single-particle dynamics analysis

Pressurized oxy-combustion (POC) is a promising candidate to reduce carbon emissions in power generation. Designing an effective burner plays a vital role in developing new combustion technologies. Because of the high pressure, the volume fraction of particles in a pressurized oxy-combustor could be higher than that in the conventional combustor, therefore, the particle dynamics in the pressurized vessel need to be evaluated accordingly. The present computational work is to predict the influence of the particle size and particle injection location on the particle trajectory. The Stokes number based on turbulence fluctuation, St, is adopted to evaluate the impact of the gas phase on the particulate phase. A large eddy simulation (LES) with the environment pressure of 15 bar and the thermal input of the fuel particle of 100 kWth has been performed by means of the commercial CFD package. It is shown that that in this pressurized environment St << 1 for the 25 µm particles, St ~ 1 for the 100 µm particles, while for the particles exceeding 200 µm St >> 1. The trajectories of the sampling particles from the LES results support this conclusion: the particles less than 100 µm tend to be uniformly distributed in the space while the particles exceeding 200 µm tend to concentrate in the combustor.

Li, Lei↗

NASA NTRS2022

Revolutionizing Our Understanding of Particle Energization in Space Plasmas Using on-Board Wave-Particle Correlator Instrumentation

A leap forward in our understanding of particle energization in plasmas throughout the heliosphere is essential to answer longstanding questions in heliophysics, including the heating of the solar corona, acceleration of the solar wind, and energization of particles that lead to observable phenomena, such as the Earth’s aurora. The low densities and high temperatures of typical heliospheric environments lead to weakly collisional plasma conditions. Under these conditions, the energization of particles occurs primarily through collisionless interactions between the electromagnetic fields and the individual plasma particles with energies characteristic of a particular interaction. To understand how the plasma heating and particle acceleration impacts the macroscopic evolution of the heliosphere, impacting phenomena such as extreme space weather, it is critical to understand these collisionless wave-particle interactions on the characteristic ion and electron kinetic timescales. Such understanding requires high-cadence measurements of both the electromagnetic fields and the three-dimensional particle velocity distributions. Although existing instrument technology enables these measurements, a major challenge to maximize the scientific return from these measurements is the limited amount of data that can be transmitted to the ground due to telemetry constraints. A valuable, but underutilized, approach to overcome this limitation is to compute on-board correlations of the maximum-cadence field and particle measurements to improve the sampling time by several orders of magnitude. Here we review the fundamentals of the innovative field-particle correlation technique, present a formulation of the technique that can be implemented as an on-board wave-particle correlator, and estimate results that can be achieved with existing instrumental capabilities for particle velocity distribution measurements.

plasma heating↗

DOE OSTI2020

Connecting particle interactions to agglomerate morphology and rheology of boehmite nanocrystal suspensions

Rheology imposes significant challenges on processing of complex suspensions such as nuclear waste slurries at the Hanford and Savannah River sites. Understanding rheology connecting to microstructures and underlying particle interactions in complex slurries is therefore important for both fundamental knowledge and practical applications. Here, we use suspensions of aluminum oxyhydroxide minerals in the form of boehmite as an analog of the radioactive waste slurry to gain physical insights on the correlation between particle interactions, microstructures, and slurry rheology. Specifically, we use a combination of Couette rheometry and small-angle scattering techniques (independently and simultaneously) to understand how the slurry microstructure changes under flow and how these structural changes manifest themselves in the bulk rheology of the suspensions. Our experiments show that the boehmite slurries are thixotropic, with the rheology and structure of the suspensions changing with increasing exposure to flow. In the slurries, particle aggregates begin as loose, system-spanning clusters, but exposure to moderate shear rates causes the aggregates to irreversibly consolidate into denser clusters of finite size. The microstructural changes directly influence the rheological properties of the slurries such as viscosity and viscoelasticity. More importantly, our study shows that solution pH affects the amount of structural rearrangement and the kinetics of the rearrangement process, with an increase in pH leading to faster and more dramatic changes in the bulk rheology. Such dynamic microstructural changes and resultant rheology are understood via correlations between particle interactions and strength of particle network, coupled with surface chemistry and anisotropic nature of particle interactions. Nearly identical structural changes are also observed in Poiseuille flow geometries, implying that the observed changes are relevant in the pipe flow conditions present during waste processing.

Weston, Javen S.↗

DOE OSTI2021

Use of Transmission Electron Microscopy for Analysis of Aerosol Particles and Strategies for Imaging Fragile Particles

For over 25 years, transmission electron microscopy (TEM) has provided a method for the study of aerosol particles with sizes from below the optical diffraction limit to several microns, resolving the particles as well as smaller features. The wide use of this technique to study aerosol particles has contributed important insights about environmental aerosol particle samples and model atmospheric systems. TEM produces an image that is a 2D projection of aerosol particles that have been impacted onto grids and, through associated techniques and spectroscopies, can contribute additional information such as the determination of elemental composition, crystal structure, and 3D particle structures. Soot, mineral dust, and organic/inorganic particles have all been analyzed using TEM and spectroscopic techniques. TEM, however, has limitations that are important to understand when interpreting data including the ability of the electron beam to damage and thereby change the structure and shape of particles, especially in the case of particles composed of organic compounds and salts. In this paper, we concentrate on the breadth of studies that have used TEM as the primary analysis technique. Another focus is on common issues with TEM and cryogenic-TEM. Insights for new users on best practices for fragile particles, that is, particles that are easily susceptible to damage from the electron beam, with this technique are discussed. Tips for readers on interpreting and evaluating the quality and accuracy of TEM data in the literature are also provided and explained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

A gas dynamic perspective on particle lifting in electrostatic discharge-like devices using multiphase particle-in-cell approach

Although particle–laden electrostatic discharges are widely used in laboratories as well as in industrial applications, the mechanism of particle lifting for particles initially at rest in such highly unsteady systems is not well understood. A multiphase gas–particle solver is developed using the multiphase particle-in-cell (MP-PIC) approach to emulate the interaction of a compressible shock-dominated gas phase with the dense particle phase. First, the two-way coupled solver is initially used to study the interaction of a planar traveling shock with a vertical curtain of particulates. The gas and particle phase evolution was found to be in good agreement with a similar experimental study in Ling et al. [Phys. Fluids 24, 113301 (2012)]. Second, the MP-PIC code is used to study the interaction of an expanding blast wave with a thick bed of particles. The simulation considered forces such as quasi-steady drag, pressure-gradient, added-mass, Saffman, and Magnus forces. We observe that the vertical liftoff particles close to the shock impingement point in this configuration are associated with the quasi-steady drag, pressure gradient, and added-mass forces. Also, the Saffman lift and Magnus forces contribute to lifting particles located radially farther away from the shock impingement point. In addition, the study finds a decrease in particle lifting efficiency with decreasing plasma kernel length and shock strength.

42 ENGINEERING↗

DOE OSTI2025

Particle signal considerations for isotope ratio analysis with single particle multi-collector inductively coupled plasma mass spectrometry

Particle analysis has benefitted from the advent of single particle inductively coupled plasma-mass spectrometry (spICP-MS) due to its robustness, sensitivity, and high-throughput nature. Previous methods of spICP-MS have typically utilized quadrupole or time-of-flight mass analyzers and therefore employ electron multiplier-based detectors (such as secondary electron multipliers or microchannel plates). However, to obtain precise measurements on elemental or isotopic ratios within individual particles, multi-collector ICP-MS (MC-ICP-MS) can be used. Here, we investigate Ce isotope ratios, specifically 142 Ce/ 140 Ce, by spMC-ICP-MS using an all-Faraday cup collector array. Using 1 μm (diameter) cerium dioxide particles, integration times of the Faraday cup detectors were varied from 50–500 ms. The signal from the cerium isotopes in the particles was used to determine isotope ratios, which closely matched the expected natural isotopic abundances. Due to the signal decay response from the Faraday cups, the signal from particles lasts much longer than the expected 1–2 ms (up to 100 s of ms). To explore this effect on isotope ratio analysis, multiple ratio analysis methods were used to determine how to obtain optimal precision and accuracy. Relative differences were around 2% for methods that calculated isotope ratios from summing the total signal of an individual particle before calculating the ratio (rather than using every data point individually). It was found that summing all data points per particle, or integrating under the signal peak, yielded both accurate and precise isotope ratios within the particle population. Particles were also sampled off a solid substrate via microextraction, and isotope ratios were determined with relative differences of 0.13% to 9%. This demonstrates the ability to use spMC-ICP-MS to obtain isotope ratios on particles, with little to no relative difference in comparison to the expected ratio, even when operating Faraday detectors at fast 50 ms integration times.

Szakas, Sarah E. [Oak Ridge National Laboratory (O↗

DOE OSTI2022

On analysis and stochastic modeling of the particle kinetic energy equation in particle-laden isotropic turbulent flows

In this study, we analyze three-dimensional particle-laden, isotropic turbulence to develop an understanding of inertial particle dynamics from a kinetic energy perspective. Data trends implying inhomogeneous sampling of the flow by particles are identified and used to support a proposed particle behavior: particles appear to accumulate in regions of low flow kinetic energy over time because they lose kinetic energy and slow down in such regions, ultimately causing them to spend more time there. To elucidate this behavior, we derive a particle kinetic energy equation from the particle momentum equation, which incorporates inertial effects through the Schiller–Naumann drag correlation. Upon extracting fundamental physics from this equation, hypotheses regarding the role of the Stokes number in the temporal change of particle kinetic energy and the previously proposed particle behavior are evaluated using simulation data considering three Stokes numbers. Finally, a Fokker–Planck equation is used to derive the steady-state probability density function of the particle kinetic energy. The model fits the simulation data well and provides a tool for further investigation into understanding preferential concentration, as well as a reduced order model for predicting particle kinetic energy in turbulent flows.

42 ENGINEERING↗

DOE OSTI2021

Bimodal particle distributions with increased thermal conductivity for solid particles as heat transfer media and storage materials

Solid particles are being considered in several high temperature thermal energy storage systems and as heat transfer media in a variety of advanced power generation systems, particularly in concentrated solar power plants. The downside of such an approach is the low overall heat transfer coefficients caused by the inherently low thermal conductivity values of the low-cost solid media when coupled to heat exchanger for the power cycle working fluid. Choosing the right particle size distribution, emittance, and material of the solid media can all make a substantial difference in packed bed thermal conductivity. Current research though exclusively focuses on continuous unimodal distributions of particles. Here, in this work, we propose the use of a binary particle system with a bimodal size distribution to significantly increase packed bed thermal conductivity by reducing packed bed porosity. This is the first study related to ceramic solid particle heat transfer that has considered the thermal conductivity of non-unimodal size distributions at room and elevated temperatures. The following study found that for the binary particle system using Carbo particles CP 16/30 – CP 70/140 where the large particle volume fraction was 50% there was an 17–47% increase in packed bed thermal conductivity when compared with a nearly unimodal particle size distribution of CP 16/30 between 50 and 300 °C. Two different porosity and effective thermal conductivity models were studied, with one providing better prediction of porosity but both effective thermal conductivity models providing less predictive capacity. Importantly this approach can have a substantial impact of thermal performance, with little to no impact on the particle cost.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Particle Size Distribution Dynamics Can Help Constrain the Phase State of Secondary Organic Aerosol

Particle phase state is a property of atmospheric aerosols that has important implications for the formation, evolution, and gas/particle partitioning of secondary organic aerosol (SOA). In this work, we use a size-resolved chemistry and microphysics model (SOM-TOMAS), updated to include an explicit treatment of particle phase state, to constrain the bulk diffusion coefficient (Db) of SOA produced from ??- pinene ozonolysis. By leveraging data from laboratory experiments performed in the absence of a seed and under dry conditions, we find that the Db for SOA can be constrained (1-7 ×10-15 cm2 s-1 in these experiments) by simultaneously reproducing the time-varying SOA mass concentrations and the evolution of the particle size distribution. Another version of our model that used the predicted SOA composition to calculate the glass transition temperature, viscosity, and, ultimately, Db (~10-15 cm2 s-1) of the SOA was able to reproduce the mass and size distribution measurements when we included oligomer formation (oligomers accounted for about a fifth of the SOA mass). Our work highlights the potential of a size resolved SOA model to constrain the particle phase state of SOA by utilizing historical measurements of the evolution of the particle size distribution.

He, Yicong↗

DOE OSTI2022

Deep learning for drag force modelling in dilute, poly-dispersed particle-laden flows with irregular-shaped particles

Here, this study applies machine learning-based approaches to develop a drag force model for irregular-shaped particles in incompressible flows. The particle-laden flows are studied through an in-house particle-resolved direct numerical simulation (PR-DNS) at low-intermediate Reynolds numbers (Re). We utilize the PR-DNS to obtain drag force coefficients and flow fields of single particles. A variational auto-encoder model is used to obtain latent vectors to represent the geometrical features of the particles, and artificial neural networks (ANN) are developed to predict drag force coefficients and flow fields of the single particles. This study applies a pairwise interaction extended point-particle (PIEP) model to obtain the coefficients assuming the flow fields of neighboring particles can be linearly superposed. The PIEP method shows significant improvement on prediction for a few neighbored particles. In addition, the results reveal R2 scores of 0.56-0.62 and errors of 9.1-10.0 % for the dilute, polydispersed systems with a volume fraction of 0.5 %.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Three-Dimensional Evaluation of Sand Particle Fracture Using Discrete-Element Method and Synchrotron Microcomputed Tomography Images

Recent research showed that fracture of sand particles plays a significant role in determining the plastic bulk volumetric changes of granular materials under different loading conditions. One of the major tools used to better understand the influence of particle fracture on the behavior of granular materials is discrete-element modeling (DEM). This paper employed the bonded block model (BBM) to simulate the fracture behavior of sand. Each sand particle is modeled as an agglomerate of rigid blocks bonded at their contacts using the linear-parallel contact model, which can transmit both moment and force. DEM simulated particles closely matched the actual three-dimensional (3D) shape of sand particles acquired using high-resolution 3D synchrotron microcomputed tomography (SMT). Results from unconfined one-dimensional (1D) compression of a single synthetic silica cube were used to calibrate the model parameters. Particle fracture was investigated for specimens composed of three sand particles that were loaded under confined 1D compression. Breakage energy measured from DEM models matched well with that measured experimentally. The paper studied the effects of contact loading condition and particle interaction on the fracture mode of particles using BBM that can closely capture the 3D shape of real sand particles.

58 GEOSCIENCES↗

DOE OSTI2021

Particle velocity measurement within a free-falling particle curtain using microscopic shadow velocimetry

We report an optical method for particle velocity measurement that is suitable for the measurement of particle velocities within dense particle-laden flows with high spatial resolution. The technique is based on particle shadow velocimetry with the use of a long-distance microscopic lens for images collection. The narrow depth of field of the lens allows particles within the focal plane to have much higher pattern intensities than those outside it on the collected images. Data processing was then employed to remove particles from outside the focal plane based on the gradient of the signal and a threshold. Following this, particle velocity was calculated from two successive images in the usual way. The technique was successfully demonstrated in a free-falling particle curtain with volume fractions in the four-way coupling regime of near-spherical micro-particles falling under gravity. The method was successfully employed to measure the transverse velocity profile through the curtain, which is the first time that such a measurement has been performed. Other highly-fidelity experimental data, which is also well suited to model development and validation, include the particle mass flow rate, curtain thickness and opacity.

Han, Shipu (ORCID:0000000278545882)↗

DOE OSTI2022

Advanced Physics Models for Particle-Particle Interactions (UCD final report)

The LDRD "Advanced Physics Models for Particle-Particle Interactions” collaborative research with Professor Jennifer Sinclair Curtis and PhD student Chanh Nguyen at the University of California, Davis involved meso-scale, discrete element method (DEM) modeling of micron-sized particles impacting a substrate. Using DEM, physical insight into the details of particle response upon impact can be obtained. Such details provide the type of information necessary to enhance existing continuum or macro-scale simulation tools so that modeling for material strength and particle breakage models is based on particle physics versus empirical relationships. While molecular dynamics simulations of atoms can also provide physical insight into the particle response to impact, the scale of particles that are treated is on the order of angstroms, not microns. This study gives evidence to the ability of the DEM simulation technique to provide such fundamental, detailed insight for micron-sized particles as a function of particle properties and impact velocity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

Impact of particle size and particle-flow-wall coupling on pressurized oxy-combustion in the down-fired burner

Concerns over climate change have led to numerous efforts in developing low-carbon energy technologies. Pressurized oxy-combustion (POC) is a promising candidate to reduce carbon emissions in power generation. Designing an effective burner plays a vital role in developing new coal combustion technologies. Because of the high pressure, the volume fraction of coal particles at the fuel inlet of the burner of a pressurized oxy-combustor is close or even higher than the maximum limit that commercial CFD codes (e.g., ANSYS FLUENT) can handle. At this high particle volume fraction, the interactions among particles, fluid flow, and wall need to be re-evaluated. The present computational work is the first step of a systematic analysis of the particle influence, like releasing method, releasing locating, and particle size, in a pilot-scale POC combustor, developed at Washington University in St. Louis (WUSTL). In a POC process, pulverized coal is burned under elevated pressure and O2-CO2 environment. Specifically, a 15-bar, 100 kWth, POC combustor is modeled employing ANSYS FLUENT, using Reynolds-averaged Navier-Stokes (RANS) modeling. It is revealed that for this pilot-scale, pressurized burner, velocity profiles of the near-wall region in this POC facility exhibit some discrepancy against the near-wall turbulent flow velocity profile. In order to investigate the particle influence in the near-wall region, particle releasing location will be investigated. Numerical simulation results exhibit the coupling effect of turbulence flow and particles in this case. The particle size also demonstrates a great effect on particle trajectory, then further has an impact on flame stability and temperature.

Li, Lei↗

NASA NTRS1993

Particle injection and the structure of energetic-particle-modified shocks

A macroscopic 'self-consistent' nonlinear two-fluid model is developed for energetic-particle-modeled shocks. The model incorporates particle exchange between a thermal gas and an energetic population via a 'thermal leakage' mechanism. In the model, injection is regarded as a process whereby particles in the cooler thermal core of a total particle distribution are energized sufficiently to cross a 'momentum boundary' into the wings of the distribution. Particles in the wings are identified as 'energetic particles' or 'cosmic rays' and are assumed to propagate according to the diffusive transport equation of cosmic ray theory. Thermal particles are energized either as a result of adiabatic compression in a decelerating flow or directly via anomalous heating within a subshock. It is shown that the nature and model of particle injection directly affects the nature and dynamics of the shock, and hence the efficiency of particle acceleration, and that the shock itself regulates particle injection dynamically.

Zank, G. P.↗

NASA NTRS2002

Small Particle Response to Fluid Motion using Tethered Particles to Simulate Microgravity

This paper reports on ground based work conducted to support the Spaceflight Definition project SHIVA (Spaceflight Holography Investigation in a Virtual Apparatus). SHIVA will advance our understanding of the movement of a particle in a fluid. Gravity usually dominates the equations of motion, but in microgravity as well as on earth other terms can become important. Before two members of our team found an analytical solution of the equations, numerical methods and/or neglecting terms were required. The general solution predicts that the usually neglected history term becomes important when the characteristic viscous time is in the same order as the vibration period and peaks when the two times are equal. In this case three force terms, the Stokes drag, the added mass, and the history drag must all be included in predicting particle movement. We also developed diagnostic recording methods using holography to save all of the particle field data, allowing the experiment to essentially be transferred from space back to earth in what we call the "virtual apparatus". Using state-of-the-art methods in holography we will quantify the three-dimensional motion of sets of particles, allowing us to test and apply the new analytical solutions. The motion of particles up to 4 mm in diameter in a fluid that oscillates at frequencies up to 100 Hz with amplitudes up to 200 microns is being examined. Ground studies to support the flight development program have employed various schemes to simulate microgravity. One of the most reliable and meaningful methods uses spheres tethered to a fine hair suspended in the fluid. We have also investigated particles with nearly neutral buoyancy. Recordings are made at the peak amplitudes of vibration of the cell providing a measure of the ratio of fluid to particle amplitude. The experiment requires precise location of the particle at the time of recording. The hologram of the particle provides microscopic images of the particle that are used for finding the position with an accuracy of a few microns. To make the experiment more versatile, the spaceflight system will record holograms both on film and electronically. The electronic holograms can be downlinked providing real time data. Results of the ground experiments, the flight experiment design, and data analysis procedures are reported.

Trolinger, J. D.↗

NASA NTRS2002

Small Particle Response to Fluid Motion using Tethered Particles to Simulate Microgravity

Trolinger, J. D.↗

NASA NTRS2004

Particles Growing in Solutions: Depletion Forces and Instability of Homogeneous Particle Distribution

Crystallites, droplets and amorphous precipitates growing from supersaturated solution are surrounded by zones, which are depleted with respect to the molecules they are built of. If two such particles of colloidal size are separated by a distance comparable to their diameters, then the depletion within the gap between particles is deeper than that at the outer portion of the particles. This will cause depletion attraction between the particles should appear. It may cause particle coagulation and decay of the originally homogeneous particle distribution into a system of clouds within which the particle number density is higher, separated by the region of the lower number density. Stability criterion, Q = 4 pi R(exp 3)c/3 >> 1, was analytically found along with typical particle density distribution wavevector q = (Q/I)(exp 1/2)(a/R)(exp 1/4). Here, R and a are the particle and molecular radii, respectively, c is the average molecular number density in solution and I is the squared diffusion length covered by a molecule during a typical time characterizing decay of molecular concentration in solution due to consumption of the molecules by the growing particles.

Chernov, A. A.↗