Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phosphorescence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Multifunctional Optical Outcouplers for Efficient and Stable White OLEDs (Final Technical Report)

Replacing fluorescence by phosphorescence in OLED-based solid-state lighting can realize the Department of Energy’s efficiency target of 83% Internal Quantum Efficiency (IQE). The principal challenge, however, is to fix the poor stability of phosphorescent blue OLEDs. To address this, we have fabricated novel plasmonic architectures that improve device stability by decreasing the exciton lifetime of the emitters without drastically decreasing the light extraction efficiency. We describe the impact on stability of these structures in high efficiency blue phosphorescent OLEDs. Although the benefit is appreciable, we find that targeting ‘bright’ triplets on phosphorescent emitter molecules is an incomplete solution, and that it is also necessary to stabilize ‘dark’ triplets formed in the host and blocking layers. We demonstrate substantial improvements in stability using the latter approach, and conclude with a discussion of potential approaches to managing dark triplets in OLEDs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Rhenium-Selenido Corroles: Reflections on 5d Metalloporphyrins and Metallocorroles as Triplet Emitters and Photosensitizers

Following the successful synthesis of rhenium-oxido, rhenium-imido, and rhenium-sulfido corroles, a series of para-X-substituted rhenium-selenido triarylcorroles (X = OCH 3 , CH 3 , H, F, CF 3 ) have been prepared in 70–76% yields. A one-pot, two-step procedure was used, analogous to that used for ReS corroles, involving rhenium insertion via high-temperature reaction of Re 2 (CO) 10 and free-base corroles in refluxing decalin, followed by exposure to PCl 3 (which is thought to deoxygenate ReO corroles formed under the reaction) and elemental selenium. An analogous procedure, however, failed to yield rhenium-tellurido corroles, presumably reflecting, according to DFT calculations, the limited stability of these species. Unlike ReO corroles, ReS and ReSe corroles were found not to exhibit phosphorescence in the NIR-I regime (600–1000 nm); nor did they sensitize singlet oxygen formation. In the hope of obtaining a broader perspective of this negative result, we also examined ReN porphyrins and found them not to phosphoresce or to sensitize singlet oxygen formation. These results were explained by DFT and TDDFT calculations in terms of low-energy triplet states, which are not energetic enough to excite molecular oxygen to its lowest singlet state. Whether some of the new Re corroles exhibit phosphorescence in the NIR-II regime remains an interesting question for future investigation.

Aromatic compounds↗
DOE OSTI2023

Excited-State Charge Transfer in Push–Pull Platinum(II) π-Extended Porphyrins Fused with Pentacenequinone

Platinum(II) π-extended porphyrins fused with pentacenequinone and dihydropentacene have been successfully synthesized. These porphyrins were investigated using various techniques including absorption, steady-state, and time-resolved phosphorescence spectroscopy and differential pulse voltammetry. UV–vis absorption spectra of pentacenequinone-fused porphyrins (SW-Pt1 and SW-Pt2) showed unusually broad and nontypical absorption patterns. Phosphorescence spectra of SW-Pt1, SW-Pt2, and SW-Pt3 displayed similar emissions in the 704–706 nm region indicating electronic transitions of similar origin; however, the triplet lifetimes were found to be quenched in the case of both SW-Pt1 and SW-Pt2, suggesting the occurrence of excited-state events. Facile reductions were obtained for both the pentacene-quinone-fused monomer (SW-Pt2) and dimer (SW-Pt1) and were identified to be located at the pentacenequinone components. Here, the observed orbital segregations for SW-Pt2 and SW-Pt1 from DFT calculations supported the possibility of charge transfer in these push–pull systems. Interestingly, the established energy level diagram revealed that the charge transfer from the triplet excited Pt porphyrin is thermodynamically an uphill process. Systematic studies involving both femtosecond and nanosecond transient absorption techniques revealed that the singlet excited Pt porphyrins undergo an intermediate charge transfer state prior to populating the triplet state, providing a plausible explanation for phosphorescence quenching. The lifetime of the intermediate charge transfer states was found to be 25.9 and 5.68 ps, respectively, for SW-Pt1 and SW-Pt2.

Charge transfer↗
DOE OSTI2024

Tetranuclear Polypyridylruthenium(II) Complexes as Selective Nucleic Acid Stains for Flow Cytometric Analysis of Monocytic and Epithelial Lung Carcinoma Large Extracellular Vesicles

Selective staining of extracellular vesicles (EVs) is a major challenge for diagnostic and therapeutic applications. Herein, the EV labeling properties of a new class of tetranuclear polypyridylruthenium(II) complexes, Rubb7-TNL and Rubb7-TL, as phosphorescent stains are described. These new stains have many advantages over standard stains to detect and characterize EVs, including: high specificity for EV staining versus cell staining; high phosphorescence yields; photostability; and a lack of leaching from EVs until incorporation with target cells. As an example of their utility, large EVs released from control (basal) or lipopolysaccharide (LPS)-stimulated THP-1 monocytic leukemia cells were studied as a model of immune system EVs released during bacterial infection. Key findings from EV staining combined with flow cytometry were as follows: (i) LPS-stimulated THP-1 cells generated significantly larger and more numerous large EVs, as compared with those from unstimulated cells; (ii) EVs retained native EV physical properties after staining; and (iii) the new stains selectively differentiated intact large EVs from artificial liposomes, which are models of cell membrane fragments or other lipid-containing debris, as well as distinguished two distinct subpopulations of monocytic EVs within the same experiment, as a result of biochemical differences between unstimulated and LPS-stimulated monocytes. Comparatively, the staining patterns of A549 epithelial lung carcinoma-derived EVs closely resembled those of THP-1 cell line-derived EVs, which highlighted similarities in their selective staining despite their distinct cellular origins. This is consistent with the hypothesis that these new phosphorescent stains target RNA within the EVs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A General Approach to Activate Second‐Scale Room Temperature Photoluminescence in Organic Small Molecules

Organic small molecules that exhibit second‐scale phosphorescence at room temperature are of interest for potential applications in sensing, anticounterfeiting, and bioimaging. However, such materials systems are uncommon—requiring millisecond to second‐scale triplet lifetimes, efficient intersystem crossing, and slow rates of nonradiative recombination. Here, a simple and scalable approach is demonstrated to activate long‐lived phosphorescence in a wide variety of molecules by suspending them in rigid polymer hosts and annealing them above the polymer's glass transition temperature. This process produces submicron aggregates of the chromophore, which suppresses intramolecular motion that leads to nonradiative recombination and minimizes triplet–triplet annihilation that quenches phosphorescence in larger aggregates. In some cases, evidence of excimer‐mediated intersystem crossing that enhances triplet generation in aggregated chromophores is found. In short, this approach circumvents the current design rules for long‐lived phosphors, which will streamline their discovery and development.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Exciton diffusion in solid solutions of luminescent lanthanide β-diketonates

In this article, a series of luminescent lanthanide β-diketonate solid solutions, with the formula of TBAEu x M 1– x (TTA) 4 (TBA = tetrabutylammonium; M = La or Gd; TTA = 2-thenoyltrifluoroacetonate), are synthesized by co-precipitation. In the solid solutions, the emission efficiency of Eu 3+ is significantly increased with the presence of non-luminescent chelates TBALa(TTA) 4 and TBAGd(TTA) 4 . Low temperature luminescence spectroscopy studies indicate that the TTA – ligands in these non-luminescent chelates do emit phosphorescence with long lifetime. However, the ligand phosphorescence is strongly quenched in solid solutions with the luminescent chelate TBAEu(TTA) 4 , providing strong evidence for intermolecular energy transfer through the triplet excited states of the ligands. Here, a quantitative analysis of Eu 3+ emission enhancement and TTA – phosphorescence quenching reveals that each Eu 3+ center may receive excitation energy from about 30 TTA – ligands, suggesting that the excitation energy has become exciton-like in the solid solutions. Based on the crystallography analysis of TBALn(TTA) 4 , it is discovered that TTA – ligands in neighboring Ln(TTA) 4 – units may form π–π stacks with intermolecular distance ≤3.5 Å, thus enabling efficient triplet exciton diffusion via exchange interaction.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Interlayer Triplet Energy Transfer in Dion–Jacobson Two-Dimensional Lead Halide Perovskites Containing Naphthalene Diammonium Cations

Recently, hybrid perovskites have gained attention as sensitizers for molecular triplet generation. Layered, two-dimensional (2D) perovskites are especially well-suited for this purpose because the triplet donor (inorganic framework) and triplet acceptor (organic layer) are self-assembled into adjacent sheets, so that with the appropriate energetics, triplets can be driven across the interface. Here we examine interlayer energy transfer in a series of mixed-halide Dion–Jacobson 2D perovskites containing divalent naphthalene cations. We find that the sensitized phosphorescence in these compounds is dominated by naphthalene triplet excimer emission, but when the inorganic exciton is tuned near resonance with the naphthalene triplet, naphthalene monomer phosphorescence competes with triplet excimer formation. The interlayer energy-transfer process is further revealed by ultrafast transient absorption spectroscopy through kinetic variations in triplet excimer formation times. Ultimately, gaining control over interlayer interactions in 2D perovskites through cation design will help uncover new functions and applications for these materials.

2D perovskite↗
DOE OSTI2025

Spin-Correlated Radical Pairs as Magnetic Switches for Controlling Emissive Triplet States via Triplet–Triplet Energy Transfer

Magnetic fields offer a powerful means to control molecular emission, enabling quantum sensing and spin-level control of chemical reactions. Here, we demonstrate a strategy to magnetically control red to near-infrared phosphorescence via triplet–triplet energy transfer (TTET) from donor–chiral bridge–acceptor (D−χ–A) molecules that generate spin-correlated radical pairs (SCRPs) upon photoexcitation. These SCRPs yield non-emissive triplet excited states whose formation is sensitive to magnetic fields. Here, by transferring this energy to emissive Pt- and Pd-based π-extended porphyrins, we enable magnetic control over phosphorescence that would otherwise be unresponsive to weak magnetic fields (<1 T). This approach establishes a platform for quantifying magnetic field effects on silent triplet states while extending magnetically responsive emission into the near-infrared. Coupling SCRP-based molecular magnetic switches to long-wavelength emissive acceptors offers a new way for probing and modulating spin-dependent processes and triplet-state populations in molecular systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Gold Quantum Rods: Modulation of Singlet and Triplet Exciton Populations by the Rod Length

Abstract Gold quantum rods (QRs) of Au60, Au78, Au96, and Au114 (protected by thiolate ligands) exhibit exclusive fluorescence, which is different from the shorter Au42 QR with dual emission (fluorescence + phosphorescence). Herein, we report the excitation wavelength-dependent near-infrared-II photoluminescence (PL) and exciton dynamics of this series of QRs. Interestingly, the fluorescence quantum yield (QY) of the QRs is much higher (2–10×) when the lowest singlet excited state (S1) is excited compared to the excitation of high-lying states (Sn). A metastable intermediate singlet state (denoted S′) is identified by transient absorption spectroscopy when Sn is excited, and this S′ state leads to fast “skybridge” intersystem crossing (ISC), which contributes primarily (>60%) to the total triplet population. With increasing aspect ratio (AR) of QRs (from 6.3 to 18.7), nonradiative processes accelerate, leading to fast decay of the S1 state (hence, less QY) and of the T1 state (barely phosphorescent). A detailed energy flow mechanism is determined for the QRs after photoexcitation, which offers a design principle for manipulation of exciton dynamics toward potential utilization of higher excited states in applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Optical O 2 Sensors Also Respond to Redox Active Molecules Commonly Secreted by Bacteria

From a metabolic perspective, molecular oxygen (O 2 ) is arguably the most significant constituent of Earth’s atmosphere. Nearly every facet of microbial physiology is sensitive to the presence and concentration of O 2 , which is the most favorable terminal electron acceptor used by organisms and also a dangerously reactive oxidant. As O 2 has such sweeping implications for physiology, researchers have developed diverse approaches to measure O 2 concentrations in natural and laboratory settings. Recent improvements to phosphorescent O 2 sensors piqued our interest due to the promise of optical measurement of spatiotemporal O 2 dynamics. However, we found that our preferred bacterial model, Pseudomonas aeruginosa PA14, secretes more than one molecule that quenches such sen sors, complicating O 2 measurements in PA14 cultures and biofilms. Assaying supernatants from cultures of 9 bacterial species demonstrated that this phenotype is common: all super natants quenched a soluble O 2 probe substantially. Phosphorescent O 2 probes are often embedded in solid support for protection, but an embedded probe called O 2 NS was quenched by most supernatants as well. Measurements using pure compounds indicated that quenching is due to interactions with redox-active small molecules, including phena zines and flavins. Uncharged and weakly polar molecules like pyocyanin were especially potent quenchers of O 2 NS. These findings underscore that optical O 2 measurements made in the presence of bacteria should be carefully controlled to ensure that O 2 , and not bacterial secretions, is measured, and motivate the design of custom O 2 probes for specific organisms to circumvent sensitivity to redox-active metabolites.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Interlayer Triplet Energy Transfer in Dion-Jacobson 2D Perovskites Containing Naphthalene Diammonium Cations

The ability to tune the heterojunction energy level alignment in layered 2D perovskites is well documented, with both early works and more recent studies reporting interfacial triplet energy transfer in certain pairings of lead halide with small conjugated organic spacer cations. Such 2D perovskites are promising systems for sensitized molecular phosphorescence, which has varied applications in optoelectronics, solar energy conversion, and more. However, even for a given organic cation core, variations in the cation structure (e.g. location of the ammonium substituent, length of the alkyl linker, and valency of the cation) can dramatically alter the organic layer morphology and electronic coupling between the inorganic and organic layers. While interlayer triplet energy transfer has been studied in Ruddlesden-Popper 2D perovskites containing monovalent naphthalene cations, the photophysical properties of their Dion-Jacobson analogue, formed using divalent naphthalene cations, have not been reported. In this study, we examine interlayer energy transfer in a series of mixed-halide 2D perovskites formed by divalent naphthalene cations. We find that the sensitized phosphorescence in these compounds is dominated by naphthalene triplet excimer emission, but when the lead halide exciton level is tuned near resonance with the triplet level of naphthalene, emission from the naphthalene triplet monomer competes with triplet excimer formation. Interlayer energy transfer in these compounds is further supported by ultrafast transient absorption spectroscopy. Ultimately, the ability to gain control over interlayer interactions in layered 2D perovskites through cation design will help uncover new functions and applications for these materials.

2D↗
DOE OSTI2025

The power of lanthanides: same composition, but different lanthanides leading to different interesting materials properties, from magnetocalorics to molecular magnets and phosphors

Commonly accepted design concepts for ionic liquids (ILs) state that the constituting ions must be large and carry low, well-dispersed charges. A series of ILs based of pentadeca charged ILs with pentanuclear linear {Ln 5 } units ([Ln 5 (C 2 H 5 -C 3 H 3 N 2 -CH 2 COO) 16 (H 2 O) 8 ](Tf 2 N) 15 (C 3 H 3 N 2 = imidazolium moiety, Tf 2 N = bis(trifluoromethanesulfonyl)amide) with Ln = Er, Ho, Tm) demonstrates that these criteria are not absolute. Highly charged ions can also support IL formation, provided they are sufficiently large. Expanding the series of these unconventional, record pentadeca charged with new lanthanide representatives, led to the discovery of additional unprecedented properties for ILs: The Gd compound exhibits a strong magnetocaloric effect (MCE) in the liquid state with a maximum magnetic entropy change of −ΔS M = −11 J⋅kg −1 ⋅K −1 at 2 K for Δμ 0 H = 7 T. Albeit the Dy representative shows slow magnetic relaxation, the relaxation times are not favorable for practical application as a molecular magnet. Lastly, for both the Gd and the Y compound, phosphorescence in the seconds time scale is observed, which is, to the best of our knowledge, the longest ever reported for an IL.

Ionic Liquids↗
DOE OSTI2020

Trace Chemical Detection Using Intercalated MXenes as a Signal Enhancing Substrate in Optical Probes

MXenes are 2D materials composed of layered transition metal nitrides or carbides. These materials are synthesized by HF exfoliation from MAX phases (Ti{sub 3}AlC{sub 2}). The 2D nanomaterial was synthesized by the removal of the 'A' element, resulting in a Mxene product (Ti{sub 3}C{sub 2}). MXenes have the general formula M{sub n+1}X{sub n}T{sub x}, where M is an early transition metal, X is Carbon and/or Nitrogen, and T accounts for surface terminated functional groups such as Fluoride, hydroxyl, and oxygen. These materials have very unique properties, similar to graphene, that allows them to be applied in a variety of trace detection techniques including surface-enhanced Raman spectroscopy (SERS). MXenes have also been demonstrated to selectively uptake uranyl ion, UO{sub 2}{sup 2+}. If this property can be combined with SERS or fluorescence detection, it may be possible to use MXenes as the basis for an alternative method to kinetic phosphorescence analysis (KPA) for trace uranyl measurements. Objectives: To confirm that MXene Nano materials are suitable substrates for SERS and sensor development by enhancing Raman signaling. To determine if certain MXene preparation methods yield materials that are more suitable for trace sensing methods. To determine uranyl uptake properties of these MXene materials and test them for analytical signals. Sample Preparation: Preparation of Ti{sub 3}C{sub 2}MXene (at FSU). MXenes were prepared by etching Al from Ti{sub 3}AlC{sub 2} (MAX phase)material. Two etching techniques yield different MXene products: LiF/HCl: Milder reaction, larger MXene flakes. HF: Harsher reaction, smaller flakes, larger layer separation. Products washed to remove etchant, vacuum filtered, and dried. Dried MXene flakes are air-stable. Film preparation for sensor testing (at SRNL): Suspend powder in diH{sub 2}O, purge with Ar, sonicate for 30 min. Centrifuge and collect supernate with suspended particles. Observed LiF-etched Mxene yielded a higher density of particles and darker collected solution. Drop-cast (4 ml) supernate onto slides and dried with Ar. For Rhodamine B (RhB) testing, drop-cast 4 ml drops onto Mxene spots and dried with Ar. Scanning Electron Microscopy conditions: 10 kV Beam energy, high vacuum; Working distance of 8 mm; beam penetration depth appx. 4 microns, beam spot size appx. 2 nanometers. Results: Detection of aluminum correlates with bright spots on image. Presence of aluminum shows that LiF/HCl etching was less thorough than HF etching. Trace Cl detection in LiF images suggests incomplete rinsing. HF has smaller feature size, more layer structure, and increased homogeneity, consistent with expectations. Macroscopic Raman spectroscopy measurements: 532 nm excitation, ∼50 mW with a ∼100 micron spot size (InPhotonics RPB probe). Kaiser Optical Holospec f/1.8 spectrometer with cooled (-60 deg.C) Andor iDus OE420 CCD. LiF 1x supernate showed good signal for trace measurements of Rhodamine B. HF and 1/4x LiF supernates showed little Mxene or Rhodamine B signal. Low deposition densities led to excess background signal from glass slides. For LiF film, response is linear with Rhodamine B concentration over range tested. Will retest with Raman microscope (∼1 micron spot size) to characterize SERS of more dilute LiF and HF etched Mxenes. Conclusions: The LiF etched material was more suitable for macroscopic SERS measurements because it was more concentrated, resulting in a thicker film than the HF etched Mxene and diluted LiF sample. However, the other materials may give greater SERS enhancements, which we hope to determine from measurements with the Raman microscope. From characterization with SEM we concluded that the HF etched Mxene is more uniform/homogenous and has smaller particle size than the LiF etched Mxene. There is still aluminum present in both samples indicating that etching wasn't complete, but the removal of the aluminum was more efficient in the HF method. Path Forward: Observe SERS with Raman microscopy, to obtain better signals for the more diluted samples and be able to compare enhancement effects for the different MXenes. Characterize uranyl sorption into MXene films and test Raman and fluorescence signals. Revisit the etching conditions to improve removal of aluminum. FSU and SRNL will continue to collaborate to create and characterize different Mxene materials and test their usefulness for sensor applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

n–Doping of a Low–Electron–Affinity Polymer Used as an Electron–Transport Layer in Organic Light–Emitting Diodes

n-Doping electron-transport layers (ETLs) increases their conductivity and improves electron injection into organic light-emitting diodes (OLEDs). Because of the low electron affinity and large bandgaps of ETLs used in green and blue OLEDs, n-doping has been notoriously more difficult for these materials. In this work, n-doping of the polymer poly[(9,9-dioctylfluorene-2,7-diyl)-alt-(benzo[2,1,3]thiadiazol-4,7-diyl)] (F8BT) is demonstrated via solution processing, using the air-stable n-dopant (pentamethylcyclopentadienyl)(1,3,5-trimethylbenzene)ruthenium dimer [RuCp*Mes] 2 . Undoped and doped F8BT films are characterized using ultraviolet and inverse photoelectron spectroscopy. The ionization energy and electron affinity of the undoped F8BT are found to be 5.8 and 2.8 eV, respectively. Upon doping F8BT with [RuCp*Mes] 2 , the Fermi level shifts to within 0.25 eV of the F8BT lowest unoccupied molecular orbital, which is indicative of n-doping. Conductivity measurements reveal a four orders of magnitude increase in the conductivity upon doping and irradiation with ultraviolet light. Here, the [RuCp*Mes] 2 -doped F8BT films are incorporated as an ETL into phosphorescent green OLEDs, and the luminance is improved by three orders of magnitude when compared to identical devices with an undoped F8BT ETL.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Control of Host-Matrix Morphology Enables Efficient Deep-Blue Organic Light-Emitting Devices

Mixing a sterically bulky, electron-transporting host material into a conventional single host–guest emissive layer is demonstrated to suppress phase separation of the host matrix while increasing the efficiency and operational lifetime of deep-blue phosphorescent organic light-emitting diodes (PHOLEDs) with chromaticity coordinates of (0.14, 0.15). Here, the bulky host enables homogenous mixing of the molecules comprising the emissive layer while suppressing single host aggregation; a significant loss channel of nonradiative recombination. By controlling the amorphous phase of the host-matrix morphology, the mixed-host device achieves a significant reduction in nonradiative exciton decay, resulting in 120 ± 6% increase in external quantum efficiency relative to an analogous, single-host device. In contrast to single host PHOLEDs where electrons are transported by the host and holes by the dopants, both charge carriers are conducted by the mixed host, reducing the probability of exciton annihilation, thereby doubling of the deep-blue PHOLED operational lifetime. These findings demonstrate that the host matrix morphology affects almost every aspect of PHOLED performance.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Visible to NIR‐II Photoluminescence of Atomically Precise Gold Nanoclusters

Abstract Atomically precise gold nanoclusters (NCs) have emerged as a new class of precision materials and attracted wide interest in recent years. One of the unique properties of such nanoclusters pertains to their photoluminescence (PL), for it can widely span visible to near‐infrared–I and –II wavelengths (NIR‐I/II), and even beyond 1700 nm by manipulating the size, structure, and composition. The current research efforts focus on the structure–PL correlation and the development of strategies for raising the PL quantum yields, which is nontrivial when moving from the visible to the near‐infrared wavelengths, especially in the NIR–II regions. This review summarizes the recent progress in the field, including i) the types of PL observed in gold NCs such as fluorescence, phosphorescence, and thermally activated delayed fluorescence, as well as dual emission; ii) some effective strategies that are devised to improve the PL quantum yield (QY) of gold NCs, such as heterometal doping, surface rigidification, and core phonon engineering, with double‐digit QYs for the NIR PL on the horizons; and iii) the applications of luminescent gold NCs in bioimaging, photosensitization, and optoelectronics. Finally, the remaining challenges and opportunities for future research are highlighted.

Liu, Zhongyu↗
DOE OSTI2025

Increasing the Stability of Deep Blue Phosphor‐Sensitized OLEDs Using the Polariton‐Enhanced Purcell Effect

Abstract The stability of efficient, deep blue organic light‐emitting diodes (OLEDs) remains a major challenge in the field of organic electronics. Poor device stability originates from the high probability for destructive non‐radiative triplet exciton annihilation events. Phosphor‐sensitized fluorescence (PSF) is proposed to achieve an efficient, deep blue color by energy transfer from phosphors to fluorophores. Recently, the polariton‐enhanced Purcell (PEP) effect is introduced to decrease the triplet radiative lifetime and density, resulting in an increase in blue phosphorescent OLED lifetime. Here, the PEP effect is introduced to enhance the stability of the PSF‐OLEDs. It is shown that the PEP effect increases all radiative decay rates of the phosphors and fluorophores, leading to a reduction in the triplet annihilation events. Using a Pt‐complex phosphor sensitizer and a so‐called multi‐resonance fluorescent emitter in a PEP cavity, a 3.1‐fold lifetime increase is observed at a current density ofJ= 10 mA cm −2 , reduced EQE roll‐off and deep blue color with Commission Internationale de l'Eclairage coordinates of (0.13, 0.09). The PEP effect maximally extends PSF‐OLED lifetimes in devices with the highest triplet‐to‐singlet energy transfer rates. Moreover, this work suggests that the benefits of PEPs apply to all triplet‐based OLEDs.

Chemistry↗