Search NASA⌕ Search

SEARCH · Search NASA

Results for “Photoreduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Supported Oxygen Evolution Catalysts by Design: Toward Lower Precious Metal Loading and Improved Conductivity in Proton Exchange Membrane Water Electrolyzers

Reducing the precious metal content of water oxidation catalysts for proton-exchange-membrane water electrolyzers remains a critical barrier to their large-scale deployment. Herein, we present an engineered architecture for supported iridium catalysts, which enables decreased precious metal content and improved activity and conductivity. The improvement in performance at lower precious metal loading is realized by the deposition of a conformal layer of platinum nanoparticles on titanium dioxide (TiO 2 ) using a facile photoreduction method to prepare conductive layer coated supports (CCSs). Platinum nanoparticles are homogeneously dispersed on TiO 2 , and the conductivity of the subsequent catalysts with 39 wt % precious group metal loadings is significantly higher than the commercial 75 wt % loaded IrO 2 -TiO 2 catalysts. The conformal conductive layer also maintains an enhanced conductivity and electrochemical activity upon thermal annealing when compared to catalysts without the conductive layer and nonconformal heterogeneous conductive layer. The iridium mass activity from half-cell studies shows a 141% improvement for CCS supported catalysts at 42% lower loadings compared to the commercial catalysts. The conductive layer also improves the single cell electrolyzer performance at a similar catalyst loading in comparison to a commercial state-of-the-art catalyst. Here, we correlate the physical properties of the engineered catalysts with their electrochemical performance in electrolyzers to understand structure-activity relationships, and we anticipate further performance improvements upon synthesis and materials optimizations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plasmonic Energetic Electrons Drive CO 2 Reduction on Defective Cu 2 O

Plasmonic photoreduction of CO 2 is valuable for decarbonization and producing value-added chemicals. However, insights into the mechanisms of this reaction remain elusive, particularly regarding the roles of structural defects and their interplay with the nonequilibrium charge carriers. Here, we report density functional theory calculations on Cu 2 O, a prototype photocatalyst, through which we investigate CO 2 reduction over three defected facets to reveal the interfacial charge transfer and bond dynamics under plasmonic excitation. We find that the activation barrier of C–O bond cleavage decreases from 3.2 to about 1 eV, assisted by oxygen vacancies, and that the remaining barrier can be further reduced or eliminated at the plasmon-excited states when Cu 2 O is integrated with plasmonic metals. The regeneration of oxygen vacancies (by H 2 to form water) on Cu 2 O to complete the catalysis cycle is feasible and not affected by the energetic electrons. Furthermore, our calculations thus show the important synergistic effect of energetic electrons and point defects to promote CO 2 reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photodriven Elimination of Chlorine From Germanium and Platinum in a Dinuclear Pt II →Ge IV Complex

Abstract Searching for a connection between the two‐electron redox behavior of Group‐14 elements and their possible use as platforms for the photoreductive elimination of chlorine, we have studied the photochemistry of [( o ‐(Ph 2 P)C 6 H 4 ) 2 Ge IV Cl 2 ]Pt II Cl 2 and [( o ‐(Ph 2 P)C 6 H 4 ) 2 ClGe III ]Pt III Cl 3 , two newly isolated isomeric complexes. These studies show that, in the presence of a chlorine trap, both isomers convert cleanly into the platinum germyl complex [( o ‐(Ph 2 P)C 6 H 4 ) 2 ClGe III ]Pt I Cl with quantum yields of 1.7 % and 3.2 % for the Ge IV –Pt II and Ge III –Pt III isomers, respectively. Conversion of the Ge IV –Pt II isomer into the platinum germyl complex is a rare example of a light‐induced transition‐metal/main‐group‐element bond‐forming process. Finally, transient‐absorption‐spectroscopy studies carried out on the Ge III –Pt III isomer point to a ligand arene–Cl . charge‐transfer complex as an intermediate.

Karimi, Mohammadjavad↗

Photodriven Elimination of Chlorine From Germanium and Platinum in a Dinuclear Pt II →Ge IV Complex

Searching for a connection between the two-electron redox behavior of Group-14 elements and their possible use as platforms for the photoreductive elimination of chlorine, we have studied the photochemistry of [(o-(Ph 2 P)C 6 H 4 ) 2 Ge IV Cl 2 ]Pt II Cl 2 and [(o-(Ph 2 P)C 6 H 4 ) 2 ClGe III ]Pt III Cl 3 , two newly isolated isomeric complexes. These studies show that, in the presence of a chlorine trap, both isomers convert cleanly into the platinum germyl complex [(o-(Ph 2 P)C 6 H 4 ) 2 ClGe III ]Pt I Cl with quantum yields of 1.7 % and 3.2 % for the Ge IV –Pt II and Ge III –Pt III isomers, respectively. Conversion of the Ge IV –Pt II isomer into the platinum germyl complex is a rare example of a light-induced transition-metal/main-group-element bond-forming process. Additionally, transient-absorption-spectroscopy studies carried out on the Ge III –Pt III isomer point to a ligand arene–Cl. charge-transfer complex as an intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aerosol iron speciation and seasonal variation of iron oxidation state over the western Antarctic Peninsula

The iron (Fe) speciation and oxidation state have been considered critical factors affecting Fe solubility in the atmosphere and bioavailability in the surface ocean. In this study, elemental composition and Fe speciation in aerosol samples collected at the Palmer Station in the West Antarctic Peninsula were determined using synchrotron-based X-ray fluorescence (XRF) and X-ray Absorption Near-Edge Structure (XANES) spectroscopy. The elemental composition of coarse-mode (>1 mu m) Fe-containing particles suggests that the region's crustal emission is the primary source of aerosol Fe. The Fe minerals in these aerosol particles were predominantly hematite and biotite, but minor fractions of pyrite and ilmenite were observed as well. The Fe oxidation state showed an evident seasonal variation. Further, the Fe(II) content accounted for 71% of the total Fe in the austral summer, while this fraction dropped to 60% in the austral winter. Multivariate linear models involving meteorological parameters suggested that the wind speed, relative humidity, and solar irradiance were the factors that significantly controlled the percentage of Fe(II) in the austral summer. On the contrary, no relationship was found between these factors and the Fe(II) percentage in the austral winter, suggesting that atmospheric photoreduction and regional dust emission were limited. Moreover, the snow depth was significantly (p < 0.05) correlated with the aerosol Fe concentration, confirming the limiting effect of snow/ice cover on the regional dust emission. Given that the Antarctic Peninsula has experienced rapid warming during recent decades, the ice-free areas in the Antarctic Peninsula may act as potential dust sources.

54 ENVIRONMENTAL SCIENCES↗

X-ray Transient Absorption Spectroscopy Reveals Light Responses of Cobalt Centers in Co-Pi OER Catalytical Devices under Electrochemical Biases

Here, operando X-ray transient absorption measurements were successfully performed for the first time on the Co-Pi catalyst, confirming a photoreduction in Co-Pi under 400 nm blue light excitation. This provides key insights into spectroelectrochemical mechanistic studies of relevant oxygen evolution catalysts and guidance for photocatalysis using these metal oxides. Limiting blue-light exposure of these films should allow for better self-healing and higher turnover in photon-driven water oxidation. These results also demonstrate the importance of performing XTA measurements under operating conditions. Further development of this technique will allow for analysis of complex materials such as tethered molecules on surfaces and in complex device architectures to yield beneficial data for applied materials.

electrochemical cells↗

Elucidating the Role of Single-Atom Pd for Electrocatalytic Hydrodechlorination

In this study, we loaded Pd catalysts onto a reduced graphene oxide (rGO) support in an atomically dispersed fashion [i.e., Pd single-atom catalysts (SACs) on rGO or Pd 1 /rGO] via a facile and scalable synthesis based on anchor-site and photoreduction techniques. The as-synthesized Pd 1 /rGO significantly outperformed the Pd nanoparticle (Pdnano) counterparts in the electrocatalytic hydrodechlorination of chlorinated phenols. Downsizing Pd nano to Pd 1 leads to a substantially higher Pd atomic efficiency (14 times that of Pdnano), remarkably reducing the cost for practical applications. The unique single-atom architecture of Pd 1 additionally affects the desorption energy of the intermediate, suppressing the catalyst poisoning by Cl – , which is a prevalent challenge with Pdnano. Characterization and experimental results demonstrate that the superior performance of Pd 1 /rGO originates from (1) enhanced interfacial electron transfer through Pd–O bonds due to the electronic metal–support interaction and (2) increased atomic H (H*) utilization efficiency by inhibiting H 2 evolution on Pd 1 . Furthermore, this work presents an important example of how the unique geometric and electronic structure of SACs can tune their catalytic performance toward beneficial use in environmental remediation applications.

36 MATERIALS SCIENCE↗

Next Generation Cuprous Phenanthroline MLCT Photosensitizer Featuring Cyclohexyl Substituents

A new long–lived, visible light–absorbing homoleptic Cu(I) metal–to–ligand charge transfer (MLCT) photosensitizer [Cu(dchtmp) 2 ]PF 6 (dchtmp = 2,9–dicyclohexyl–3,4,7,8–tetramethyl–1,10–phenanthroline), has been synthesized, structurally characterized, and evaluated in terms of its molecular photophysics, electrochemistry, and electronic structure. Static and time–resolved transient absorption (TA) and photoluminescence (PL) spectroscopy measured on the title compound in CH 2 Cl 2 (τ = 2.6 μs, Φ PL = 5.5%), CH 3 CN (τ = 1.5 μs, Φ PL = 2.6%), and THF (τ = 2.0 μs, Φ PL = 3.7%) yielded impressive photophysical metrics even when dissolved in Lewis basic solvents. The combined static spectroscopic data along with ultrafast TA experiments revealed that the pseudo–Jahn–Teller distortion and intersystem crossing dynamics in the MLCT excited state displayed characteristics of being sterically arrested throughout its evolution. Here, electrochemical and static PL data illustrate that [Cu(dchtmp) 2 ]PF 6 is a potent photoreductant (–1.77 V vs. Fc +/o in CH 3 CN) equal to or greater than all previously investigated homoleptic Cu(I) diimine complexes. Although we successfully prepared the cyclopentyl analog dcptmp (2,9–dicyclopentyl–3,4,7,8–tetramethyl–1,10–phenanthroline) using the same C–C radical coupling photochemistry as dchtmp, the corresponding Cu(I) complex could not be isolated due to the steric hinderance presented at the metal center. Ultimately, the successful preparation of [Cu(dchtmp) 2 ] + represents a major step forward for the design and discovery of novel earth–abundant photosensitizers made possible through a newly conceived ligand synthetic strategy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aqueous TiO 2 Nanoparticles React by Proton-Coupled Electron Transfer

Redox reactions of aqueous colloidal TiO 2 4 nm nanoparticles (NPs) have been examined, including both citratecapped and uncapped NPs (c-TiO 2 and uc-TiO 2 ). Photoreduction gave stable blue colloidal c-TiO 2 R NPs with 10–60 electrons per particle. Equilibration of these reduced NPs with soluble redox reagents such as methylviologen (MV 2+ ) provided measurements of the colloid reduction potential as a function of pH. The potentials of c-TiO 2 from pH 2–9 varied linearly with pH, with a slope of –60 ± 5 mV/pH. Estimates of the potential at pH 12 were consistent with extrapolating that line to high pH. The reduction potentials did not correlate with the zeta potentials (ζ) or the surface charge of the NPs across this pH range. Similar reduction potentials were observed for c- and uc-TiO 2 at low pH even though they have quite different ζ potentials. These results show that the common surface-charging explanation of the pH dependence is not tenable in these systems. Oxidation of reduced c-TiO 2 R with the electron-transfer oxidant potassium triiodide (KI 3 ) occurred with a significant drop in pH, showing that protons were released when the electrons were removed from the NPs. Smaller pH drops were observed for the proton-coupled electron transfer (PCET) reagents O 2 (air) and 4-MeO-TEMPO (4-methoxy-2,2,6,6-tetramethylpiperine-1-oxy radical). The difference in the number of protons released with KI 3 vs O 2 and 4-MeO-TEMPO was roughly one proton per electron removed. Thus, the thermodynamically preferred reactivity of these colloidal TiO 2 NPs is PCET over the pH 2–13 range studied. The measured redox potentials refer to the chemical process TiO 2 + H + + e – → TiO 2 ·e – ,H + ; and therefore they do not correspond with an electronic energy such as a conduction band edge or flat band potential. The 1e – /1H + stoichiometry means that the TiO 2 reduction potentials correspond to a TiO 2 –H bond dissociation free energy (BDFE), determined to be 49 ± 2 kcal mol –1 . The PCET description is consistent with the pH dependence of E(TiO 2 /TiO 2 ·e – ,H + ), the release of protons upon oxidation, the lack of correlation with ζ potentials, the similarity of capped and uncapped NPs, and the small change in the potential and BDFE from the first to the last electron/proton pair (H atom) removed. Furthermore, this behavior is suggested to be the norm for redox-active oxide/water interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Employing Long-Range Inductive Effects to Modulate Metal-to-Ligand Charge Transfer Photoluminescence in Homoleptic Cu(I) Complexes

Four Cu(I) bis(phenanthroline) photosensitizers formulated from a new ligand structural motif (Cu1-Cu4) coded according to their 2,9-substituents, were synthesized, structurally characterized, and fully evaluated using steady-state and time-resolved absorption and photoluminescence (PL) measurements as well as electrochemistry. The 2,9-disubstituted-3,4,7,8-tetramethyl-1,10-phenanthroline ligands feature the following six-membered ring systems prepared through photochemical synthesis: 4,4-dimethylcyclohexyl (1), tetrahydro-2H-pyran-4-yl (2), tetrahydro-2H-thiopyran-4-yl (3), and 4,4-difluorocyclohexyl (4). Universally, these Cu(I) metal-to-ligand charge transfer (MLCT) chromophores display excited state lifetimes on the microseconds time scale at room temperature, including the three longest-lived homoleptic cuprous phenanthroline excited states measured to date in deaerated CH 2 Cl 2 , τ = 2.5 to 4.3 μs. This series of molecules also feature high PL quantum efficiencies (ΦPL = 5.3 to 12% in CH 2 Cl 2 ). Temperature-dependent PL lifetime experiments confirmed that all these molecules exhibit reverse intersystem crossing and display thermally activated delayed PL from a 1 MLCT excited state lying slightly above the 3 MLCT state, 1050 – 1490 cm -1 . Ultrafast and conventional transient absorption measurements confirmed that the PL originates from the MLCT excited state, which remains sterically arrested, preventing an excessive flattening distortion even when dissolved in Lewis basic CH 3 CN. Combined PL and electrochemical data provided evidence that Cu1-Cu4 are highly potent photoreductants (E ox * = -1.73 to -1.62 V vs. Fc +/o in CH 3 CN), whose potentials are altered solely based on which heteroatoms or substituents are resident on the 2,9-appended ring derivatives. It is proposed that long-range electronic inductive effects are responsible for the systematic modulation observed in the PL spectra, excited state lifetimes, as well as the ground state absorption spectra and redox potentials. Cu1-Cu4 quantitatively follow the energy gap law, correlating well with structurally related cuprous phenanthrolines and are also shown to triplet photosensitize the excited states of 9,10-diphenylanthracene with bimolecular rate constants ranging from 1.61 to 2.82 × 10 8 M –1 s –1 . Furthermore, the ability to tailor both photophysical and electrochemical properties using long-range inductive effects imposed by the 2,9-ring platforms advocates new directions for future MLCT chromophore discovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-Electron–Two-Proton Transfer from Colloidal ZnO and TiO 2 Nanoparticles to Molecular Substrates

Transfers of multiple electrons and protons are challenging yet central to many energy-conversion processes and other chemical and biochemical reactions. Semiconducting oxides can hold multiple redox equivalents. This study describes the 2e – /2H + transfer reactivity of photo-reduced ZnO and TiO 2 nanoparticle (NP) colloids with molecular 2e – /2H + acceptors, to form new O-H, N-H, and C-H bonds. The reaction stoichi-ometries were monitored by NMR and optical spectroscopies. Faster 2e – /2H + transfer rates were observed for substrates forming O-H or N-H bonds, presumably due to initial hydrogen bonding at the oxide surface. Chemically reduced ZnO NPs stabilized by Na + or Ca 2+ also engage in 2e – /2H + transfer reactivity, showing that protons transferred in these processes are inherent to the oxide nanoparticles and do not exclusively stem from photoreduction. Furthermore, these results highlight the potential of ZnO and TiO 2 for multiple proton-coupled electron transfer (PCET) reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Precise Colloidal Plasmonic Photocatalysts Constructed by Multistep Photodepositions

Natural photosynthesis relies on a sophisticated charge transfer pathway among multiple components with precise spatial, energetic, and temporal organizations in the aqueous environment. It continues to inspire and challenge the design and fabrication of artificial multicomponent colloidal nanostructures for solar-to-fuel conversion. Herein, we introduce a plasmonic photocatalyst synthesized with colloidal methods with five integrated components including cocatalysts installed in orthogonal locations. The precise deposition of individual inorganic components on an Au/TiO 2 nanodumbell nanostructure is enabled by photoreduction and photo-oxidation, which selectively occurs at the TiO 2 tip sites and Au lateral sites, respectively. Under visible-light irradiation, the photocatalyst exhibited activity of oxygen evolution from water without scavengers. Here, we demonstrate that each component is essential for improving the photocatalytic performance. In addition, mechanistic studies suggest that the photocatalytic reaction requires combining the hot charge carriers derived from exciting both the d-sp interband transition and the localized surface plasmon resonance of Au.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Methyl Viologen Lead Iodide for Photocatalytic Reductive Coupling of Aromatic Carbonyls via Proton-Coupled Electron Transfer

Organic–inorganic metal halides (OIMHs) have emerged as promising photocatalysts for organic transformations due to their excellent optoelectronic properties. However, their instability, particularly under protic conditions, has limited their broader applications. Here, we report that a facilely prepared methyl viologen lead iodide (MVPb 2 I 6 ) powder can efficiently catalyze the visible-light-driven reductive coupling of aromatic aldehydes and ketones in protic solvents. Remarkably, MVPb 2 I 6 retains its structural integrity after photoreduction, highlighting its robustness. These results suggest that incorporating quaternary pyridinium cations into the OIMHs can enhance their stability and expand their applicability in photocatalytic organic synthesis.

organic-inorganic hybrid composites↗

Conflicting Roles of Coordination Number on Catalytic Performance of Single-Atom Pt Catalysts

Tailoring the coordination number (CN) of metal atoms has been increasingly recognized as one of the strategies to enhance the catalytic performance of single-atom catalysts (SACs). We here present the single-atom Pt loaded onto a semiconductor SiC substrate (Pt 1 /SiC) with a high loading of up to 9.6 wt % and a precise control of its CN from 3 to 5. The CN tuning was enabled by binding organic linkers on the substrate surface and retaining the metal-linker bonds after photoreduction and mild thermal treatment from 80 to 160 °C. At a higher temperature, Pt became coordinated with additional oxygen atoms from the surface Si–OH groups and organic linkers. This resulted in the increase of the CN from 3 for Pt 1 treated at 80 °C to 5 at 160 °C. The Pt 1 /SiCs with varying CNs effectively broke C–Br bonds in the model brominated compounds through both thermocatalysis using H 2 and photocatalysis using H + as the source for strongly reducing atomic hydrogen (H atom ). The thermocatalytic debromination kinetics increased with the decreasing CN. However, photocatalytic debromination kinetics were independent of the CN, contradictory to the prevalent understanding in literature. Furthermore, we attribute the differential CN effects on these two catalytic schemes to the differences in the pathways for the formation of H atom as well as the rate-limiting step of the overall reaction pathways. Our study presents a unique and important example as to how the performance of SACs and the role of CN can significantly vary depending on the catalytic schemes.

36 MATERIALS SCIENCE↗

Coloring Tetrahedral Semiconductors: Synthesis and Photoluminescence Enhancement of Ternary II-III 2 -VI 4 Colloidal Nanocrystals

Ternary tetrahedral II-III 2 -VI 4 semiconductors, where II is Zn or Cd, III In or Ga, and VI S, Se, or Te, are of interest in UV radiation detectors in medicine and space physics as well as CO 2 photoreduction under visible light. We synthesize colloidal II-III 2 -VI 4 semiconductor nanocrystals from readily available precursors and ascertain their ternary nature by structural and spectroscopic methods, including 77 Se solid-state NMR spectroscopy. The pyramidally shaped nanocrystals range between 2 and 12 nm and exhibit optical gaps of 2–3.9 eV. In the presence of excess anions on the particle surface, treatment with Lewis acidic, Z-type ligands results in better passivation and enhanced photoluminescence. Electronic structure calculations reveal the most stable, lowest energy polymorphs and coloring patterns. This work will pave the way toward more environmentally friendly, ternary semiconductors for optoelectronics and electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Characterization of the Platinum Nanoparticle Hydrogen-Evolving Catalyst Assembled on Photosystem I by Light-Driven Chemistry

Directed assembly of abiotic catalysts onto biological redox protein frameworks is of interest as an approach for the synthesis of biohybrid catalysts that combine features of both synthetic and biological materials. In this report, we provide a multiscale characterization of the platinum nanoparticle (NP) hydrogen-evolving catalysts that are assembled by light-driven reductive precipitation of platinum from an aqueous salt solution onto the photosystem I protein (PSI), isolated from cyanobacteria as trimeric PSI. The resulting PSI-NP assemblies were analyzed using a combination of X-ray energy-dispersive spectroscopy (XEDS), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), small-angle X-ray scattering (SAXS), and high-energy X-ray scattering with atomic pair distribution function (PDF) analyses. The results show that the PSI-supported NPs are approximately 1.8 nm diameter disk-shaped particles that assemble at discrete sites with 145 Å separation. This separation is too large to be consistent with NP nucleation and growth at a site adjacent to the F B cofactor site. Instead, we suggest a mechanism for NP growth at hydrophobic sites on the PSI stromal surface. The NPs photoreductively assembled on the PSI stromal surface are found to be analogous to the nanostructures produced by successive cycles of atomic layer deposition (ALD) of platinum onto 40 nm porous anodic alumina oxide supports, although the mechanisms for nucleation appear to differ. In conclusion, this work establishes a foundation for the investigation of the reductive assembly of abiotic metal catalysts at sites connected to photochemically reducing equivalent production in PSI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoreversible Color-Switching Cu-Doped TiO2 Nanoparticles for High-Contrast Rewritable Printing

Light-printable rewritable paper that can be used multiple times has attracted extensive attention because of its potential benefits in reducing environmental pollution and energy consumption. Developing rewritable paper with high black-to-colorless contrast, lasting legibility, and a fast response is fascinating but challenging. Here, we integrate the redox chemistry of Cu2+ ions into photoreductive TiO2 nanoparticles to produce Cu-doped TiO2 nanoparticles capable of highly photoreversible switching between colorless and black with excellent contrast and color stability. Incorporating such nanoparticles into hydroxyethyl cellulose produces a rewritable paper with the same appearance as that of conventional paper. More importantly, it demonstrates great features promising for practical applications, including high black-to-colorless contrast, fast light-printing (<20 s), long legible time (>3 days), high reversibility (>50 cycles), high resolution (90 μm), and large scale (A4 size) applicability.

Wang, Wenshou↗

Solution-Processable Polymer Donor-Small Molecule Acceptor Bulk Heterojunction Organocatalysts for Enhancing CO 2 -to-CO Photoconversion

Metal-free organic semiconductors have emerged as a kind of promising star material in photocatalysis. However, their photocatalytic efficacy is impeded by the great recombination rate of the photogenerated charge carriers. Herein, we demonstrate the devising of solution-processable organic semiconductor bulk heterojunction (BHJ) systems with varying ratios by using BP3DT and PC 61 BM as the donor (D) and acceptor (A) candidates, respectively, for enhanced selective CO production from CO 2 photoreduction. The prepared BP3DT/PC 61 BM BHJs are solution-processed on both glass substrates (GS) and molecular sieves (MS) via a drop-casting technique to form an active thin film and porous photocatalysts to catalyze CO production. All BP3DT/PC 61 BM BHJs efficiently produce CO as the primary product in the existence of trace-level TEA/H 2 O (0.5 mL). Our results show that the photocatalytic efficiency depended on the D/A w% ratios and its nanoscale phase separation morphology within the BHJ, contributing to the promotion of exciton dissociation. Additionally, the BHJ undergoes an ostensible morphological transition from large-scale phase-separation to a fine mixed homogeneous nanoscale by varying the BP3DT/PC 61 BM blend ratio from 30/70 w% to 70/30 w%, which increases the interfacial area and shortens the distance of the exciton to the D/A surface, and promotes charge carrier separation, corroborated by photo-optical and photoelectrochemical experimental results. Accordingly, the resulting BP3DT/PC 61 BM BHJ@MS with a D/A ratio of 70/30 w% achieves a CO yield of 819 μmol·g cat -1 h -1 , surpassing those of pure PC 61 BM (126 μmol·g cat -1 h -1 ) and BP3DT (72 μmol·g cat -1 h -1 ) by 6.5- to 11.3-fold and also exceeding that of metal-free linear conjugated polymer-based organocatalysts reported to date. Specifically, this is the first work to develop an organic-semiconductor-based BHJ photocatalyst, which may offer a nascent way to design more efficient organocatalysts for CO 2 reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗