Search NASA⌕ Search

SEARCH · Search NASA

Results for “Plasma codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Validation of realistic Monte Carlo plasma gamma-ray source on JET discharges

A novel modelling methodology has been developed for the creation of a realistic plasma gamma-ray source for Monte Carlo transport simulations in the tokamak JET. The methodology couples the TRANSP code for plasma transport calculations with the MCNP Monte Carlo particle transport code, thus connecting plasma physics with gamma-ray transport. Here, we present the validation of the developed source methodology by comparing calculated gamma-ray spectra with measurements performed at JET. The validation focuses on gamma-ray spectra measured by the tangential gamma-ray spectrometer during two JET three ion RF scenario discharges, performed in the JET 2019 deuterium experimental campaign. For validation the calculated plasma gamma-ray spectrum was combined with the neutron induced prompt gamma-ray background, originating in the vacuum vessel, and scaled to absolute values calculating the total number of plasma gamma-ray and neutron emitting reactions. The comparison between calculated and measured gamma-ray spectra shows good agreement with the shape of the calculated gamma-ray spectra matching that of measurements for both studied discharges. Moreover, the calculated absolute values of the gamma-ray spectra were of the same order of magnitude at the position of the gamma-ray detector located at the end of a long line-of-sight in a biological shield. Finally, the comparison has validated the developed plasma gamma-ray source methodology for MCNP photon transport calculations at JET. The validation provides a basis for the developed plasma gamma-ray source to be used as a support for the development of future tokamaks such as DEMO.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Exploring the effect of ELM and code-coupling frequencies on plasma and material modeling of dynamic recycling in divertors

Abstract Integrated modeling of plasma-surface interactions provides a comprehensive and self-consistent description of the system, moving the field closer to developing predictive and design capabilities for plasma facing components. One such workflow, including descriptions for the scrape-off-layer plasma, ion-surface interactions and the sub-surface evolution, was previously used to address steady-state scenarios and has recently been extended to incorporate time-dependence and two-way information flow. The new model can address dynamic recycling in transient scenarios, such as the application presented in this paper: the evolution of W samples pre-damaged by helium and exposed to ELMy H-mode plasmas in the DIII-D DiMES. A first set of simulations explored the effect of ELM frequency. This study was discussed in detail in this conference’s proceedings and is summarized here. The 2nd set of simulations, which is the focus of this paper, explores the effect of code-coupling frequency. These simulations include initial SOLPS solutions converged to the inter-ELM state, ion impact energy ( E in ) and angles ( A in ) calculated by hPIC2, and an improved heat transfer description in Xolotl. The model predicts increases in particle fluxes and decreases in heat fluxes by 10%–20% with the coupling time-step. Compared with the first set of simulations, the less shallow impact angle leads to smaller reflection rates and significant D implantation. The higher fraction of implanted flux (and deeper), in particular during ELMs, increases the accumulated D content in the W near-surface region. Future expansion of the workflow includes coupling to hPIC2 and GITR to ensure accurate descriptions of E in and A in , and W impurity transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

FLARE: field line analysis and reconstruction for 3D boundary plasma modeling

The FLARE code is a magnetic mesh generator that is integrated within a suite of tools for the analysis of the magnetic geometry in toroidal fusion devices. A magnetic mesh is constructed from field line segments and permits fast reconstruction of field lines in 3D boundary plasma codes such as EMC3-EIRENE. Both intrinsically non-axisymmetric configurations (stellarators) and those with symmetry breaking perturbations of an axisymmetric equilibrium (tokamaks) are supported. The code itself is written in Modern Fortran with MPI support for parallel computing, and it incorporates object-oriented programming for the definition of the magnetic field and the material surface geometry. Extended derived types for a number of different magnetohydrodynamic equilibrium and plasma response models are implemented. The core element of FLARE is a field line tracer with adaptive step-size control, and this is integrated into tools for the construction of Poincaré maps and invariant manifolds of X-points. A collection of high-level procedures that generate output files for visualization is build on top of that. The analysis modules are build with Python frontends that facilitate customization of tasks and/or scripting of parameter scans.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

FullWave — A Full Wave Parallel Code for Modeling RF Fields in Hot Tokamak Plasma

FullWave is a computer code that simulates how radio-frequency (RF) waves travel and deposit energy in the hot plasma inside a fusion reactor. RF waves are used to heat the plasma and drive electrical current, which is essential for sustaining fusion reactions. The code uses a new algorithm that can handle much finer spatial detail than previous codes — more than 100 times finer — while running efficiently on national supercomputers. It incorporates a detailed physics model that captures subtle kinetic effects important for accurate prediction of wave behavior. Under this project, FullWave was extended to cover multiple RF frequency ranges relevant to present and future tokamaks, and validated against experimental parameters from the DIII-D tokamak at General Atomics. Results were published in peer-reviewed journal articles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Similarity for downscaled kinetic simulations of electrostatic plasmas: Reconciling the large system size with small Debye length

A simple similarity has been proposed for kinetic (e.g., particle-in-cell) simulations of plasma transport that can effectively address the long-standing challenge of reconciling the tiny Debye length with the vast system size. This applies to both transport in unmagnetized plasma and parallel transport in magnetized plasmas, where the characteristics length scales are given by the Debye length, collisional mean free paths, and the system or gradient lengths. The controlled scaled variables are the configuration space, x/L, and an artificial Coulomb Logarithm, L ln Λ, for collisions, while the scaled time, t/L, and electric field, LE, are automatic outcomes. The similarity properties are examined, demonstrating that the macroscopic transport physics is preserved through a similarity transformation while keeping the microscopic physics at its original scale of Debye length. To showcase the utility of this approach, two examples of 1D plasma transport problems were simulated using the VPIC code: the plasma thermal quench in tokamaks [Li et al., Nuclear Fusion 63, 066030 (2023)] and the plasma sheath in the high-recycling regime [Li et al., Physics of Plasmas 30, 063505 (2023)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Modeling study of divertor particle flow pattern and in–out plasma density asymmetry due to drifts with SOLPS and BOUT++

A study of the effects of drifts on the particle flow pattern and in–out divertor plasma density asymmetry for L-mode and H-mode plasmas is carried out for EAST discharges by the edge plasma transport codes SOLPS and BOUT++. The simulation of L-mode plasmas is done by SOLPS while the simulation of H-mode plasmas is done by BOUT++. The toroidal magnetic field direction for the simulated discharge is artificially reversed in the codes to study the effects of different drift directions on the divertor particle flow pattern and the in–out asymmetry of divertor plasma density. The divertor particle flows induced by diamagnetic and E × B drifts are found to have similar directions in the divertor region for the same discharge. The directions of the flows induced by drifts would be reversed with the reverse of toroidal magnetic field direction. The diamagnetic drift seems to have no effect on the in–out asymmetry of divertor plasma density due to its divergence-free nature. However, the E × B drift could result in a pronounced asymmetry of plasma density between the inner and outer divertor targets. The density in–out asymmetry caused by E × B drift is reversed with the reverse of E × B drift flow direction. Detailed analysis shows that the radial component of the E × B drift flow is the main cause of density asymmetry. The results from the simulation of H-mode plasmas with BOUT++ are similar to those of the L-mode plasmas with SOLPS except that the drift effects seem to be slightly larger in the H-mode plasmas compared to the L-mode plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

INtegrated Fluid & paRticles simulatioN cOde (INF&RNO) v1.0

INF&RNO (INtegrated Fluid & paRticle simulation cOde) is a 2D cylindrical (r-z) code to model the interaction of short laser pulse(s) with an underdense plasma. The code is based on an envelope model for the laser field, and the action of the laser on the plasma is modeled with the time-averaged ponderomotive force approximation. The code features an improved laser envelope solver which enables an accurate description of the laser pulse evolution deep into depletion even at a reasonably low resolution.

Benedetti, Carlo [Lawrence Berkeley National Labor↗
DOE OSTI2024

Analysis and design of fast flow liquid Li divertor for fusion nuclear science facility (FNSF) using coupled plasma boundary and LM MHD/heat transfer codes *

The SOLPS-ITER code is utilized to analyze the boundary plasma associated with a fast-flow lithium (Li) divertor configuration in the fusion nuclear science facility (FNSF) tokamak and identify operational regimes with acceptable divertor and core conditions. Plasma transport from the SOLPS-ITER code has been coupled with a liquid metal (LM) MHD/heat transfer code to model a Li open-surface divertor design and assess its impact on the scrape-off-layer (SOL) and core plasma performance. Simulations with only Neon (Ne) impurity seeding have been conducted to evaluate its impact on meeting FNSF design demands for the divertor and upstream plasma parameters. Simulation results indicate that Ne seeding significantly mitigates divertor heat flux but potentially reduces both upstream electron and main ion density due to fuel dilution. The combined application of Ne seeding and deuterium (D 2 ) puffing is required to satisfy the FNSF design requirements on upstream density ($n^{OMP}_{e,sep}$~1× 10 20 m -3 ) and divertor energy flux ($q^{Odiv}_{\bot,max}$<10 MW m -2 ). D 2 puffing plays a role in counteracting upstream density drops and augmenting energy and momentum losses through atomic and molecular processes. The inlet Li flow velocity is systematically varied across a wide range to identify acceptable flows and corresponding LM surface temperatures. This comprehensive analysis identifies the acceptable Li flow parameters, LM surface temperature, and emitted Li fluxes necessary to meet the major design constraints. The emitted Li fluxes exhibit minimal impact on the main plasma at surface temperatures up to approximately ~525 °C, corresponding emitted Li fluxes of up to φ Li ~2X10 23 atoms s -1 . Uncertainties in the Li emission processes from the surface are also investigated, primarily influencing Li loss in the lower surface temperature range (<525 °C), with simulation results indicating a minor impact on the divertor and upstream plasma. Conversely, evaporation predominantly drives the Li loss processes at higher surface temperature ranges (>525 °C), contaminating both the divertor and upstream plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Modeling of deuterium and carbon radiation transport in MAST-U tokamak advanced divertors

Modest effects of deuterium and carbon radiation opacity in the Super-X and snowflake divertor plasmas are predicted for MAST Upgrade tokamak with core plasma input power 2.5–5 MW and plasma current 1 MA. The radiation transport modeling is based on the SOLPS-EIRENE and UEDGE code divertor plasma predictions. Two radiation transport models are used: one is based on a full radiation transport equation implemented in the radiation transport and collisional-radiative code CRETIN (without feedback on the background plasma), and another is an internal self-consistent UEDGE model with ionization, recombination, and heating rates corrected for Ly α line trapping based on the escape probability model implemented in CRETIN. In MAST-U, the Super-X and snowflake divertor plasmas are predicted to reach detached regimes at lower upstream densities than the standard divertor, and the conclusion still holds with radiation transport effects included. At neutral densities m -3 , modest Ly α deuterium line trapping with optical depths 10–15 is predicted in the Super-X divertor. Divertor plasmas are optically thin to other Lyman and Balmer lines, as well as to strong C III and C IV lines that are responsible for most of divertor radiated power. Insignificant changes (within a few percent) to divertor deuterium ionization and recombination rates are found. Radiation fluxes on outer divertor target are modified within a factor of 2–3 when the radiation transport is accounted for, and a similar variation is found due to the line shape models that define the absorption and emission line profiles in the radiation transport modeling. The predicted Lyman and Balmer spectral intensities are significantly modified due to radiation trapping. A measurement of divertor radiation transport effects is discussed using the Ly β /Ba α line ratio. In the snowflake divertor configuration, divertor plasmas are found to be optically thin to Lyman series lines within a large range of parameter variations that include upstream density, divertor transport coefficients, and magnetic configurations. Finally, modest radiation transport effects are only found in a few cases with strongest divertor transport and magnetic configurations closest to the ideal snowflake configuration, however, the plasma background models that were used are yet to be validated with an experiment.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Center for Tokamak Transients Simulations

The major goals for the Center for Tokamak Transients Simulations (CTTS) were to develop detailed numerical simulations of disruptive transients in tokamak experiments and to use them in theoretical studies of the thermal-quench (TQ) and current-quench (CQ) phases of disruption. The University of Wisconsin-Madison component of CTTS contributed relevant development for the NIMROD code (https://nimrodteam.org) and applied it to disruptions that involve global vertical displacement. Code-development contributions include boundary conditions that represent sheath effects which occur when tokamak plasma is in contact with the surrounding vessel wall during vertical displacement events (VDEs). We also implemented a reduced model of energetic runaway electrons (REs) to simulate the effect of these energetic electrons on the CQ phase of tokamak disruptions. Our computations of VDEs include 2D and 3D verification through benchmarks with two other widely used macroscale plasma simulation codes, M3D-C1 and JOREK. Over nonlinear evolution to the final termination of plasma current, the 2D simulation results on magnetic axis location, toroidal current, and halo current track each other well. With the 3D benchmark computation, all three codes found the same qualitative behavior of the asymmetric instabilities having increasing growth rate after contact with the wall, followed by nonlinear excitation of other toroidal harmonics. Our NIMROD computations for an idealized configuration show agreement with an analytical assessment by V. D. Pustovitov [Nucl. Fusion 55, 113032 (2015)] that the plasma and non-ideal wall remain in force-balance such that net forces only result from magnetic stresses over the outer surface of the wall. Our study of the influence of boundary conditions on VDEs shows that extended-MHD simulations of VDEs are sensitive to electron energy transport to the wall and that boundary conditions on flow are only significant to the extent that they influence the electron energy transport. Resistive-MHD NIMROD simulations of the tokamak discharges in the Madison Symmetric Torus show that magnetic perturbations of poloidal wavenumber m=3 lead to chaotic magnetic topology over the edge region, which helps deconfine energetic electrons. A second area of RE study shows that the coupled resistive MHD/reduced RE model reproduces the resistive-hose particle-beam instability. With respect to educational opportunities, this effort involved and supported four graduate students at the University of Wisconsin-Madison and one postdoctoral associate. The results of this study have been disseminated through journal publications, conference presentations, technical reports, and PhD dissertations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Modeling transient edge plasma transport with dynamic recycling

The work presents numerical simulation studies of the role that dynamic plasma recycling on the main wall and divertor target surfaces plays in transient edge plasma transport phenomena, such as edge localized modes (ELMs). The studies are performed by coupling the edge plasma transport code UEDGE [Rognlien et al., J. Nucl. Mater. 196–198, 347 (1992)] and the wall reaction–diffusion transport code FACE [Smirnov et al., Fusion Sci. Technol. 71, 75 (2017)]. The two-dimensional, time-dependent, two-way coupling of the codes, in a realistic tokamak geometry, is accomplished using the Integrated Plasma Simulator framework [Elwasif et al., in 18th Euromicro Conference on Parallel, Distributed and Network-Based Processing (PDP 2010), Pisa, Italy (IEEE, 2010), pp. 419–427] for all modeled material plasma boundaries. The simulations show that dynamic plasma recycling has substantially different characteristics on the main wall and on the divertor plates. It is demonstrated that during an ELM cycle the outer wall can dynamically absorb and release a number of particles comparable to that expelled by the ELM from the core plasma, by far exceeding the dynamic retention capacity of the divertor surfaces. The resulting evolution of the edge and divertor plasma conditions during an ELM cycle is analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

MRT 7365 Power flow physics and key physics phenomena: EMPIRE verification suite

This milestone work baselines electromagnetic particle-in-cell capability of the EMPIRE plasma simulation code to model key processes germane to the physics of electrode plasmas arising in magnetically-insulated transmission lines operating at or near 20 MA. This evaluation is done so through the provision of benchmark verification problems designed to exercise the individual and combined physics models on a small-scale surrogate geometry for the final-feed-to-load region of the Z accelerator under representative operating conditions. In this report, we overview our test designs, and present a portfolio of simulation results along with performance assessments which altogether establish state-of-the-art. In particular, two main verification categories are covered this report: (1) Z-relevant desorption physics (Temkin isotherm), and (2) two approaches to simulate electrode plasma creation and dynamics (automatic creation versus self-consistent creation through direct simulation Monte Carlo collisions).

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Simulation of the SPARC plasma boundary with the UEDGE code

Here in this work, the UEDGE edge transport code is used to examine conditions in the SPARC divertor and edge plasma for various levels of carbon impurity and power from the core (P SOL ). A double-null magnetic configuration is simulated assuming up-down symmetry in geometry and physics. The anomalous heat and particle transport coefficients are tuned to match empirical predictions for SPARC's midplane density profiles, target plate heat flux profiles, and inner/outer divertor power sharing. Convective transport is included on the low-field side, while on the high-field side the transport is modeled as purely diffusive. Hydrogen neutrals are modeled as a fluid with inertial effects, and a carbon impurity is included using the fixed-fraction model. We find that detachment induced by impurity seeding could significantly reduce the heat flux to the divertor surfaces in the SPARC tokamak. At P SOL = 28 MW (the value predicted for SPARC's full-power H-mode scenario) cases with both divertor legs detached were obtained with a carbon impurity fraction between 0.3%–1.4%, far below Z eff limits for SPARC. When the plasma in the outer leg is detached, the peak heat flux density perpendicular to the target plate is below 1 MW m -2 , electron and ion temperatures are less than 1.5 eV, and momentum detachment is observed. However, the detachment state is found to be sensitive to the side-wall boundary conditions, the level of neutral pumping, and the target plate tilt. Finally, a broadly similar SOLPS simulation of SPARC is used to assess the appropriateness of the simpler impurity and neutral models used in UEDGE.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

1D EDIPIC

EDIPIC codes were developed for simulation of kinetic effects in low-temperature plasmas. They can be used for simulation of plasmas in electrostatic approximation and include many atomistic and plasma-surface interaction processes needed for simulations of low temperature plasmas. These codes include a detailed model of secondary electron emission induced by electrons and ions. The Monte-Carlo model of electron-neutral collisions and the Langevin model of Coulomb collisions for electrons are also implemented.

Sydorenko, Dmytro↗
DOE OSTI2021

EDIPIC-2D

EDIPIC codes were developed for simulation of kinetic effects in low-temperature plasmas. They can be used for simulation of plasmas in electrostatic approximation and include many atomistic and plasma-surface interaction processes needed for simulations of low temperature plasmas. These codes include a detailed model of secondary electron emission induced by electrons and ions. The Monte-Carlo model of electron-neutral collisions and the Langevin model of Coulomb collisions for electrons are also implemented.

Sydorenko, Dmytro↗
DOE OSTI2024

Simulation of plasma and neutral transport in PISCES-RF using SOLPS-ITER

In this research, the fluid plasma transport code SOLPS-ITER is applied and validated against experimental data from the plasma interaction surface component experimental station (PISCES)-RF linear plasma device to establish a physics basis for plasma and neutral transport in its two magnetic field (B-field) geometry setups-(1)the cusp and (2) non-cusp or linear B-field. The main focus of this study is to understand (1) radial plasma transport (2) heat and particle loads on the upstream dump and downstream target plate, and (3) the physics of plasma-neutral interactions in PISCES-RF. The simulation setup adheres to typical PISCES-RF experimental conditions, with a 2D helicon power deposition profile as an input heating source. SOLPS-ITER simulations reproduce experimental conditions with the Bohm diffusion model for both B-field configurations of the PISCES-RF experiment. Major energy loss channels include neutral radiation and power deposited on the wall and dump plate, with only 1% of the input power reaching the target. The ionization front is well confined near the dump plate due to the heating and puffing regions. Additionally, SOLPS-ITER simulation results are also found to be in very good agreement with the particle-in-cell calculations using the code-PICOS++ which supports the validity of SOLPS in low collisionality regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Linear simulations of a wide pedestal quiescent H-mode plasma with the extended-MHD code NIMROD

We present linear simulations of a Wide Pedestal QH (WPQH)-mode DIII-D plasma with the NIMROD code to address the role of ion multispecies collisionality on WPQH-modes. We use a full extended-MHD model that captures Alfvénic and magnetoacoustic waves, including two-fluid, ion gyroviscosity and cross heat flux. We show that two-fluid and ion gyroviscous effects destabilize electron-directed peeling–ballooning modes in the pedestal. The linear growth rates of the modes decrease when carbon (C) is added to a deuterium plasma because the multispecies collisional effects increase the plasma resistivity. When replacing C with tungsten (W), the multispecies collisional effects increase the resistivity further, as well as the stabilizing effect on the instabilities. The resistivity impact on mode stability is reversed when both two-fluid and ion gyroviscous effects are ignored, which is consistent with previous works, proving that multispecies collisional effects, together with two-fluid and ion gyroviscosity, should be considered to address the stability of plasmas with significant impurity content.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗