Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polar water”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Relaxation dynamics of water in the vicinity of cellulose nanocrystals

Water molecules near cellulose nanocrystals (CNCs; produced via the sulfuric acid-catalyzed hydrolysis of wood pulp) are believed to relax slower than those in the bulk liquid, which may result in unique properties of CNC aqueous dispersions. Herein this study analyzed the polarization behavior of water molecules in CNC aqueous dispersions and other reference samples using a dielectric relaxation spectroscopy (DRS) technique in the microwave frequency range (0.2–20 GHz). As the CNC concentration increases, two slow relaxation components become prominent. The comparison with DRS data of aqueous dispersions of nanoporous silica, polyvinyl alcohol (PVA), and hairy CNC (HCNC) with amorphous chains protruding from both ends suggested that these slow relaxation modes of water near CNC surfaces cannot be attributed to direct hydrogen bonding interactions with the hydroxyl (OH) groups exposed and immobilized at the solid surface. Instead, they are similar to the water molecules interacting with OH groups attached to flexible polymer chains. Molecular dynamics (MD) simulations of the polarization behavior of water near the (110) facet of cellulose Iβ crystals confirmed that the interactions of water molecules with the cellulose crystal surface do not cause slower relaxations in the frequency range studied via the DRS. These results indicated that the CNC surface cannot be depicted with the crystallographic facets of cellulose Iβ; instead, it resembles a polymer-brush surface on which the short glucan residues or fragments of the strong acid-catalyzed hydrolysis process are swollen and extended into the aqueous phase.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Conducting thermal energy to the membrane/water interface for the enhanced desalination of hypersaline brines using membrane distillation

Membrane distillation (MD) is a membrane-based thermal desalination process capable of treating hypersaline brines. Standard MD systems rely on preheating the feed to drive the desalination process. However, relying on the feed to carry thermal energy is limited by a decline of the thermal driving force as the water moves across the membrane, and temperature polarization. In contrast, supplying heat directly into the feed channel, either through the membrane or other channel surfaces, has the potential of minimizing temperature polarization, increasing single-pass water recoveries, and decreasing the number of heat exchangers in the system. When solar thermal energy can be utilized, particularly if the solar heat is optimally delivered to enhance water evaporation and process performance, MD processes can potentially be improved in terms of energy efficiency, environmental sustainability, or operating costs. Here we describe an MD process using layered composite membranes that include a high-thermal-conductivity layer for supplying heat directly to the membrane-water interface and the flow channel. Here, the MD system showed stable performance with water flux up to 9 L/m 2 /hr, and salt rejection >99.9% over hours of desalinating hypersaline feed (100 g/L NaCl). In addition to bench-scale system, we developed a computational fluid dynamics model that successfully described the transport phenomena in the system.

42 ENGINEERING↗
DOE OSTI2024

Binding of Sulfates and Water to Monovalent Cations

The binding of the sulfate ligand group to monovalent cations in the presence of water is important for many systems. To understand the structure and energetics of sulfate complexes, we use density functional theory to study ethyl sulfate binding to the monovalent cations Li + , Na + , and K + , and to water. The free energies of binding and optimal structures are calculated for a range of the number of ethyl sulfates and waters. Without water, the most optimal structure for all the cations is bidentate binding by two ethyl sulfates, yielding a 4-fold coordination. With water, the lowest free energy structures also have two ethyl sulfates, but the coordination varies with cations. For complexes with water, the four oxygen atoms in the sulfate group enable multiple binding geometries for the cations and for hydrogen bonding with water. Many of these geometries differ in free energy by only a small amount (1–2 kcal/mol), meaning there will be multiple binding configurations in bulk solution. In comparison to the optimal structures for binding to the carboxylate group, there is more variation for binding to the sulfate group as a function of cation type and the number of waters. Further, the polarization of the atoms is significant and varies among the sulfate oxygen atoms. The water oxygen charge is often larger than that of sulfate oxygen, which plays a role in the preference for monodentate ligand binding to cations in the presence of water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electrically Powered High-Salinity Brine Separation Using Dimethyl Ether

Dewatering highly saline aqueous streams, from mining and geothermal leachates to industrial wastewater, is essential for effective resource recovery and safe disposal. Membraneless water extraction (MWE) uses a low-polarity solvent to separate water from concentrated aqueous solutions. In this study, we design a new MWE that uses dimethyl ether (DME) to selectively extract water from high-salinity brines, leveraging the volatility of DME to achieve rapid solvent recovery. By separating water and dissolved salts at a liquid–liquid interface, MWE minimizes the deleterious effects of scaling on vulnerable membrane and heat exchanger surfaces, reducing the need for extensive pretreatment and expensive materials. We begin by developing a computational framework for a multistage counterflow liquid–liquid contactor, which extracts water into DME, coupled with a multistage solvent regenerator that uses vapor compression to efficiently separate the desalinated water from the DME extractant. Excess Gibbs free energy and equation of state frameworks are used to model fluid phase equilibria in water–DME–sodium chloride (NaCl) mixtures, with interaction parameters estimated from experimental data. Incorporating equilibrium calculations into a system-scale computational model, we examine the performance of MWE using DME for the first time. Our analysis demonstrates that MWE can concentrate seawater desalination brine (>1.0 mol NaCl kg –1 ) to zero-liquid discharge salinities, with an energy consumption of under 50 kW h per m 3 of water extracted with a solvent recovery ratio greater than 99.9%. We highlight the importance of staging the vapor compression process to simultaneously minimize energy consumption while enabling brine concentration and product water solvent contamination. Finally, the thermodynamic framework developed here allows for the robust evaluation of new MWE solvents and systems for critical brine concentration and fractional precipitation applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Extracted Water Induces Concentration Fluctuations in Model Ternary Liquid–Liquid Extraction System

Organic phase aggregation and phase splitting are two important (and connected) phenomena in liquid–liquid extraction of metal ions. Previously, we demonstrated how structure in binary mixtures of extractant and diluent originates from concentration fluctuations associated with the so-called “third-phase formation” liquid–liquid phase instability. For more complex systems, we sought to understand how extracted aqueous components affect these concentration fluctuations. Here, in this study, we use small-angle X-ray scattering and molecular dynamics simulations to investigate organic phase structural changes upon contact with water in a model ternary system of water/alkane/extractant. Critical exponents were determined from scattering with temperature variation and were consistent with mean field values. Then, by controlling the water content in the organic phase through direct dissolution of fixed quantities at constant temperature, we relate the observed increase in the fluctuation length scale to changes to the spinodal temperature of the third-phase formation phase boundary. We find a roughly linear relationship between water concentration and the spinodal temperature and a similar slope in that relationship for different linear alkane diluents. This suggests that the mechanism by which water extraction impacts the organic phase structure is to enhance concentration fluctuations through the introduction of additional polar extractant-water complexes, which increases the spinodal temperature and thereby decreases the reduced temperature, i.e., the distance to the instability. This explanation for how solutes induce aggregation in liquid–liquid extraction organic phases may extend to more complex systems, explaining the large increases in correlation lengths reported under high acid and metal loading.

Bonnett, Brittany L. [Argonne National Laboratory ↗
DOE OSTI2025

How Solvent Mediates the Catalytic Fate of 2-Methoxyphenol in Hydrodeoxygenation Catalysis?

Kinetic and isotopic assessments combined with theoretical calculations shed light on the mechanistic differences in terms of the number of hydrogen addition steps and the electronic charges of reactive hydrogen in the catalytic sequence leading to the Ar−OCH 3 scission of 2-methoxyphenol occurring at various interfaces of vapor−Ru, cyclohexane−Ru, and water−Ru. At vapor−Ru and cyclohexane−Ru interfaces, the initial hydrogen adatom (H*) additions on the phenyl ring disrupt its aromaticity, as a step required to occur before kinetically relevant Ar−OCH 3 scission on an ensemble of Ru sites. The number of H* addition events prerequisite to the formation of the kinetically relevant Ar−OCH 3 scission transition state, however, is larger at the cyclohexane−Ru interface than those at the vapor−Ru and water−Ru interfaces. The preferential solvation of 2-methoxyphenol derived reaction precursors and H* weakens their adsorption on Ru sites, which leads to a decrease in the activation barrier for the third H* addition step and in turn a larger number of H* additions. At the water−Ru interface, water as a polar protic solvent promotes the Ar−OCH 3 scission by enabling a mechanistically distinct catalytic route an adjacent water molecule from the solvent layer assists with the intramolecular proton shuttling from the hydroxyl group (−OH) to the vicinal methoxy group (−OCH 3 ) of 2-methoxyphenol, evolving a highly charged transition state that is further stabilized by the water solvent layer, thereby leading to Ar−OCH 3 scission rate constants that are much higher than those at the vapor−Ru interface and, when comparing at the same H 2 chemical potential, higher Ar−OCH 3 scission turnovers. Furthermore, these distinct mechanistic details of the Ar−OCH 3 scission at various reaction interfaces, inferred from experiment and theory, illustrate how a solvent either solvates reaction intermediates and transition states or directly participates in the formation of kinetically relevant transition states, leading to changes in the free energy landscape, thus rewriting the catalytic fates in hydrodeoxygenation reactions.

09 BIOMASS FUELS↗
DOE OSTI2023

Polarity-dependence of the nonlinear dielectric response in interfacial water

Molecular dynamics simulations are used to study the nonlinear dielectric responses of a confined aqueous film in a planar nanopore under perpendicular electric fields at varied voltages between confining graphene sheets. Dielectric saturation reminiscent of the bulk phase behavior is prevalent at very strong fields, whereas we observe a nonmonotonic permittivity dependence on the electric field at intermediate strengths where field-alignment and spontaneous polarization of interfacial water are of comparable magnitude. The coupling between the two effects results in distinct dielectric responses at opposite confinement walls. The normal component of both the differential dielectric constant and dielectric difference constant tensors averaged over the region closer to the wall under an incoming electric field (field pointing from the liquid to the solid phase) initially increases with the strength of the imposed field. The differential permittivity peaks at a field strength previously shown to offset the surface-induced orientation bias of hydration molecules at this wall. Further strengthening of the field results in a conventional saturation behavior. At the opposite wall (subject to outgoing field) and in the central region of the water slab, the nonlinear dielectric response resembles bulklike saturation. The conditions at the permittivity extremum coincide with the window of accelerated reorientation rates of interfacial water molecules under an incoming field we uncovered in earlier molecular dynamics analyses.

Chemistry↗
DOE OSTI2020

The Critical Role of Reductive Steps in the Nickel-Catalyzed Hydrogenolysis and Hydrolysis of Aryl Ether C-O Bonds

Hydrogenolysis of the aromatic C-O bond in aryl ethers is catalyzed by Ni in decalin or water at 150 °C. Observations of a significant kinetic isotope effect (kH/kD = 5.7) for the reactions of diphenyl ether under H2 and D2 and a positive dependence of the rate on H2 chemical potential in decalin indicate that addition of H to the aromatic ring is the rate-limiting step rather than C-O scission. Hydrogen addition occurs on the metal before C-O bond scission. DFT calculations indicate that hydrogen atom addition to the ortho position followed by C-O scission is energetically more feasible than C-O scission followed by H addition to either phenoxyl or phenyl moieties. Hydrogenolysis initiated via H addition in water is more selective (~75 %) compared to reactions in decalin (~30 %). The high selectivity for hydrogenolysis is attributed to stabilization of polar transition state by water as a polar solvent.

Wang, Meng↗
DOE OSTI2020

Deconstruction of biomass enabled by local demixing of cosolvents at cellulose and lignin surfaces

A particularly promising approach to deconstructing and fractionating lignocellulosic biomass to produce green renewable fuels and high-value chemicals pretreats the biomass with organic solvents in aqueous solution. Here, neutron scattering and molecular-dynamics simulations reveal the temperature-dependent morphological changes in poplar wood biomass during tetrahydrofuran (THF):water pretreatment and provide a mechanism by which the solvent components drive efficient biomass breakdown. Whereas lignin dissociates over a wide temperature range (>25 °C) cellulose disruption occurs only above 150 °C. Neutron scattering with contrast variation provides direct evidence for the formation of THF-rich nanoclusters (R g ∼ 0.5 nm) on the nonpolar cellulose surfaces and on hydrophobic lignin, and equivalent water-rich nanoclusters on polar cellulose surfaces. The disassembly of the amphiphilic biomass is thus enabled through the local demixing of highly functional cosolvents, THF and water, which preferentially solvate specific biomass surfaces so as to match the local solute polarity. A multiscale description of the efficiency of THF:water pretreatment is provided: matching polarity at the atomic scale prevents lignin aggregation and disrupts cellulose, leading to improvements in deconstruction at the macroscopic scale.

09 BIOMASS FUELS↗
DOE OSTI2022

Localized Corrosion of Chromium-Containing Conventional and Multiprincipal Element Alloys in Methanol and Aqueous Chloride Environments

The localized corrosion behavior of Type 304L stainless steel (UNS S30400), Alloy 625 (UNS N06625), and three experimental NiCoCrMo multiprincipal element alloys (MPEA), exposed to methanol/lithium chloride solutions with different water contents, is examined in this paper. Cyclic potentiodynamic polarization tests indicated that water increased the pitting and repassivation potentials and the critical temperature at which localized corrosion occurred in chloride solutions. The effect of water on repassivation potential in methanol-chloride solution depended on the chloride concentration and alloy content. At lower chloride concentration and higher alloy content, water had a greater inhibiting effect on repassivation potential, suggesting a competitive reaction between chloride and water on the metal surface in the pit. The localized corrosion resistance of the MPEAs followed the same trend as that of commercial stainless steels and Ni-base alloys in terms of the effect of alloying elements. The implications of these results on the mechanisms of localized corrosion are discussed.

Materials Science↗
DOE OSTI2024

Attosecond impulsive stimulated X-ray Raman scattering in liquid water

We report the measurement of impulsive stimulated x-ray Raman scattering in neutral liquid water. An attosecond pulse drives the excitations of an electronic wavepacket in water molecules. The process comprises two steps: a transition to core-excited states near the oxygen atoms accompanied by transition to valence-excited states. Thus, the wavepacket is impulsively created at a specific atomic site within a few hundred attoseconds through a nonlinear interaction between the water and the x-ray pulse. We observe this nonlinear signature in an intensity-dependent Stokes Raman sideband at 526 eV. Our measurements are supported by our state-of-the-art calculations based on the polarization response of water dimers in bulk solvation and propagation of attosecond x-ray pulses at liquid density.

Science & Technology - Other Topics↗
DOE OSTI2025

Thermodynamics of calcium binding to heparin: Implications of solvation and water structuring for polysaccharide biofunctions

Heparan sulfates are found in all animal tissues and have essential roles in living systems. This family of biomacromolecules modulates binding to calcium ions (Ca 2+ ) in low free energy reactions that influence biochemical processes from cell signaling and anticoagulant efficacy to biomineralization. Despite their ubiquity, the thermodynamic basis for how heparans and similarly functionalized biomolecules regulate Ca 2+ interactions is not yet established. Using heparosan (Control) and heparins with different positions of sulfate groups, we quantify how SO 3 − and COO − content and SO 3 − position modulate Ca 2+ binding by isothermal titration calorimetry. The free energy of all heparin-Ca2+ interactions (ΔG rxn ) is dominated by entropic contributions due to favorable water release from polar, hydrophilic groups. Heparin with both sulfate esters (O-SO 3 − ) and sulfamides (N-SO 3 − ) has the strongest binding to Ca 2+ compared to heparosan and to heparin with only O-SO 3 − groups (~3X). By linking Ca 2+ binding thermodynamics to measurements of the interfacial energy for calcite (CaCO 3 ) crystallization onto polysaccharides, we show molecule-specific differences in nucleation rate can be explained by differences in water structuring during Ca 2+ interactions. A large entropic term (-TΔS rxn ) upon Ca 2+ –polysaccharide binding correlates with high interfacial energy to CaCO 3 nucleation. Combining our measurements with literature values indicates many Ca 2+ –polysaccharide interactions have a shared thermodynamic signature. The resulting enthalpy–entropy compensation relationship suggests these interactions are generally dominated by water restructuring involving few conformational changes, distinct from Ca 2+ –protein binding. Our findings quantify the thermodynamic origins of heparin-specific interactions with Ca 2+ and demonstrate the contributions of solvation and functional group position during biomacromolecule-mediated ion regulation.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Nonlinear dielectric relaxation of polar liquids

Molecular dynamics of two water models, SPC/E and TIP3P, at a number of temperatures are used to test the Kivelson-Madden equation connecting single-particle and collective dielectric relaxation times through the Kirkwood factor. The relation is confirmed by simulations and used to estimate the nonlinear effect of the electric field on the dielectric relaxation time. We show that the main effect of the field comes through slowing down of the single-particle rotational dynamics and the relative contribution of the field-induced alteration of the Kirkwood factor is insignificant for water. Theories of nonlinear dielectric relaxation need to mostly account for the effect of the field on rotations of a single dipole in a polar liquid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Outgassing measurements of bare and magnetite-coated low-carbon steel vacuum chambers

The outgassing properties of bare and magnetite-coated AISI 1020 low-carbon steel vacuum chambers were evaluated to establish material selection criteria for extreme high vacuum applications, namely, to explore the possibility of using these materials to build next-generation spin-polarized photoelectron guns. Water outgassing measurements using the throughput method revealed that the magnetite-coated chamber exhibited five times lower outgassing at room temperature prior to baking, but this advantage disappears after 80 °C baking. Hydrogen outgassing measurements demonstrated significant differences after intensive heat treatment: the bare low-carbon steel vacuum chamber achieved a specific outgassing rate of 9.6 × 10 −16 Torr L s −1 cm −2 after 400 °C/50 h bake plus additional heat treatment at lower temperatures, 25 times lower than the magnetite-coated low-carbon steel chamber. Residual gas analysis showed >99% hydrogen composition after heat treatment for both materials, with carbon species below detection limits for bare low-carbon steel versus 0.8% for magnetite-coated surfaces. These measurements indicate that properly conditioned bare low-carbon steel can achieve the <10 −12 Torr pressures required for next-generation spin-polarized photogun applications. In conclusion, the paper includes various analysis techniques intended to explain observed behaviors: isotherm analysis of pump-down plots, Arrhenius analysis of hydrogen outgassing rate data, and residual gas composition tracking.

Adsorption isotherm↗
DOE OSTI2022

Macroscale superlubricity by a sacrificial carbon nanotube coating

Superlubricity, i.e., coefficient of friction (COF) below 0.01, was earlier limited to microscale in controlled environments in the earlier literature and more recently realized for macroscale sliding of ceramic or carbon surfaces lubricated by water or other polar fluids. However, there is lack of report of superlubricity for the most common bearing system, i.e., steel-steel contact in non-polar oil lubrication. Here, in this work, we present ultra-low COF of 0.001–0.007 by using a sacrificial coating composed of vertically-aligned carbon nanotubes (CNTs) for macroscale steel-steel sliding under minimum quantity lubrication (MQL) of a polyalphaolefin (PAO) oil in the ambient environment. Raman spectroscopy and electron microscopy analyses detected graphene-containing tribofilms on both the steel surfaces, which was produced by the fractured CNT flakes and metallic wear debris during running-in. The in situ formed graphene-graphene contact interface presumably possesses a low shear resistance leading to superlubricity. The presence of oil, despite as little as one droplet, has proven to be crucial. Such a superlubricity performance has shown good sustainability in extended testing of more than 500,000 cycles and strong ability of accommodating changes in sliding conditions. Results here demonstrate feasibility with fundamental insights for achieving ambient environment macroscale superlubricity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Using Computationally-Determined Properties for Machine Learning Prediction of Self-Diffusion Coefficients in Pure Liquids

The ability to predict transport properties of liquids quickly and accurately will greatly improve our understanding of fluid properties both in bulk and complex mixtures, as well as in confined environments. Such information could then be used in the design of materials and processes for applications ranging from energy production and storage to manufacturing processes. As a first step, we consider the use of machine learning (ML) methods to predict the diffusion properties of pure liquids. Recent results have shown that Artificial Neural Networks (ANNs) can effectively predict the diffusion of pure compounds based on the use of experimental properties as the model inputs. In the current study, a similar ANN approach is applied to modeling diffusion of pure liquids using fluid properties obtained exclusively from molecular simulations. A diverse set of 102 pure liquids is considered, ranging from small polar molecules (e.g., water) to large nonpolar molecules (e.g., octane). Self-diffusion coefficients were obtained from classical molecular dynamics (MD) simulations. Since nearly all the molecules are organic compounds, a general set of force field parameters for organic molecules was used. The MD methods are validated by comparing physical and thermodynamic properties with experiment. Computational input features for the ANN include physical properties obtained from the MD simulations as well as molecular properties from quantum calculations of individual molecules. Furthermore, fluid properties describing the local liquid structure were obtained from center of mass radial distribution functions (COM-RDFs). Feature sensitivity analysis revealed that isothermal compressibility, heat of vaporization, and the thermal expansion coefficient were the most impactful properties used as input for the ANN model to predict the MD simulated self-diffusion coefficients. The MD-based ANN successfully predicts the MD self-diffusion coefficients with only a subset (2 to 3) of the available computationally determined input features required. A separate ANN model was developed using literature experimental self-diffusion coefficients as model targets. Although this second ML model was not as successful due to a limited number of data points, a good correlation is still observed between experimental and ML predicted self-diffusion coefficients.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Tank Bottom Corrosion Induced by Anode-Generated Oxygen

Cathodic protection system using aclose coupled mixed metal oxide (MMO) anode is the corrosion prevention technique for soil-side of the aboveground storage tank (AST) bottoms. MMO anodes generate oxygen at its surfacesdue to water electrolysis at polarized potentials above a threshold; oxygen from the MMO anodes can depolarize the bottoms’polarized potentials. Further, when the tank bottom plate loses contact with the sand pad due to flexing, oxygen can accumulate in the void space and accelerate corrosion. This paper provides information on preventive measures that can be adopted to prevent oxygen concentration corrosion of the AST soil-side bottoms

36 MATERIALS SCIENCE↗