Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polydimethylsiloxane”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Various Low-Symmetry Phases in High- χ and Conformationally Asymmetric PDMS- b -PTFEA Copolymers

Since the discovery of the Frank–Kasper (FK) phase a decade ago, single-component block copolymer systems have offered unique opportunities to explore the structural and phase-transition properties of topologically close-packed FK phases composed of point-particle motifs. Here, we present the formation of complex low-symmetry phases and their thermodynamic stability using high-χ and high-ε linear diblock copolymers, where χ and ε are the Flory–Huggins interaction parameter and conformational asymmetry between the two blocks, respectively. In this work, a series of polydimethylsiloxane-b-poly(2,2,2-trifluoroethyl acrylate) (PDMS-b-PTFEA) copolymers are prepared by tuning the volume fraction ($f_{\text{PTFEA}}$) of a minor PTFEA block. The packing structures of PDMS-b-PTFEAs are mapped in the space of temperature versus $f_{\text{PTFEA}}$ using X-ray scattering measurements. In addition to the packing structures reported earlier, we identify another A15 phase at higher $f_{\text{PTFEA}}$ close to a hexagonally packed cylinder (HEX) phase and establish the phase sequence of HEX–A15–σ–C14–BCC with decreasing $f_{\text{PTFEA}}$. Theoretical calculation of relative free-energy densities confirms the experimental phase sequence of the composition-dependent sphere-packing structures. Interestingly, the domain sizes of three-dimensional (3D) sphere-packing structures are nearly temperature-invariant compared to that of a two-dimensional HEX structure, and we attribute this dimensional stability to the strong enthalpic effects in the formation of 3D packing structures and the geometrical characteristics of spherical domains. Our results demonstrate that the interaction parameter χ, together with the known role of conformational asymmetry ε, serves as the primary thermodynamic parameter for selecting and stabilizing various low-symmetry packing structures in sphere-forming linear diblock copolymer systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Modifying Frank–Kasper Mesophases by Modulating Chain Configuration in PDMS- b -PTFEA Copolymers

The common spherical mesophases observed from chemically distinct compounds have promoted extensive studies of packing structures in soft-matter self-assemblies. In this report we present a new approach for controlling sphere-packing phases by modulating homologous copolymer chain configurations. To this end, three sets of sample pairs, compositionally asymmetric polydimethylsiloxane-b-poly(2,2,2-trifluoroethyl acrylate) (PDMS-b-PTFEA) diblock copolymers (diBCPs) and their homologues containing the corresponding triblock copolymer (triBCP), are synthesized via atom transfer radical polymerization and designed with the consistent volume fractions of the core-forming PTFEA block, f PTFEA = 0.20, 0.18, and 0.15. We identify the formation of C15 and hexagonally close-packed (HCP) phases in the triBCP-containing PDMS-b-PTFEAs, whereas the sigma and C14 phases are formed in their diBCP analogues, respectively. These phase shifts into C15 and HCP, due to molecular configuration differences, reveal a significant yet unrealized role of chain configurations and the associated chain size effects in determining the stable sphere-packing phases in BCP systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Pendant Group Modifications Provide Graft Copolymer Silicones with Exceptionally Broad Thermomechanical Properties

Graft copolymers offer a versatile platform for the design of self-assembling materials; however, simple strategies for precisely and independently controlling the thermomechanical and morphological properties of graft copolymers remain elusive. Here, using a library of 92 polynorbornene-graft-polydimethylsiloxane (PDMS) copolymers, we discover a versatile backbone-pendant sequence-control strategy that addresses this challenge. Small structural variations of pendant groups, e.g., cyclohexyl versus n-hexyl, of small-molecule comonomers have dramatic impacts on order-to-disorder transitions, glass transitions, mechanical properties, and morphologies of statistical and block silicone-based graft copolymers, providing an exceptionally broad palette of designable materials properties. For example, statistical graft copolymers with high PDMS volume fractions yielded unbridged body-centered cubic morphologies that behaved as soft plastic crystals. By contrast, lamellae-forming graft copolymers provided robust, yet reprocessable silicone thermoplastics (TPs) with transition temperatures spanning over 160 °C and elastic moduli as high as 150 MPa despite being both unentangled and un-cross-linked. Altogether, this study reveals a new pendant-group-mediated self-assembly strategy that simplifies graft copolymer synthesis and enables access to a diverse family of silicone-based materials, setting the stage for the broader development of self-assembling materials with tailored performance specifications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Pyroelectricity of Lead Sulfide (PbS) Quantum Dot Films Induced by Janus-Ligand Shells

Asymmetry is an essential property to control. To do that in nanocrystalline systems we have developed methods to produce Janus-ligand shells on otherwise symmetric PbS quantum dots (QDs). In this work, we demonstrate that control by constructing a system that exhibits pyroelectricity built from spherical PbS QDs. We observed a pyroelectric current in two different configurations. In one configuration, the QDs are self-assembled into close-packed arrays while in the second configuration, the QDs are dispersed into an electro-inactive polymer, polydimethylsiloxane. Both exhibit a pyroelectric response. In the first configuration we estimate a lower limit of the pyroelectric coefficient to be 1.97 × 10 -7 C/m 2 K, which is likely limited by the degree of QD alignment during film formation but is already on par with common pyroelectric systems. Compared with inorganic ceramic-like and polymeric pyroelectric materials, pyroelectric films self-assembled from polar QDs are easier to prepare, responsive to light with different energies based on QD exciton energy, and the polarization of each QD could be easily tuned by constructing different Janus-ligand shells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Polymer-Derived Amorphous Aluminosilicate Nanomembranes for H 2 Purification

Aluminosilicate zeolite membranes with robust microporous crystalline structures are attractive for the molecular separation of H 2 from light gases, but their large-scale fabrication is complicated and costly, hindering their practical applications. Herein, we present polymer-derived amorphous aluminosilicate nanomembranes that combine the exceptional processability of polymers with the superior gas separation properties of aluminosilicates. Specifically, thin-film composite membranes comprising 150 nm polydimethylsiloxane were first treated with oxygen plasma to generate 10 nm polyorganosilica (POSi) on the surface, which were then subjected to few-cycle atomic layer deposition (ALD) using trimethylaluminum as a metal precursor and water vapor as a coreactant. This scalable two-step process yields few-nanometer amorphous aluminosilicates with strong size-sieving ability. For example, three-cycle ALD treatment of POSi increases H 2 /CO 2 selectivity from 39 to 200 and H 2 /CH 4 selectivity from 190 to 500, while decreasing H 2 permeance from 990 to 210 GPU at 150 °C, superior to the state-of-the-art membranes. In conclusion, rapid and scalable manufacturing of amorphous aluminosilicate nanolayers can also be of interest for catalysis and adsorption applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis of Bio-Based Repairable Polyimines with Tailored Properties by Lignin Fractionation

Developing sustainable polymers with low-value lignin remains a challenge. Herein, lignin-containing repairable polyimines were synthesized with tailored properties using lignin fractionation. First, softwood Kraft lignin is fractionated into a more homogeneous fraction with a lower molecular weight and a higher OH content. Next, Kraft lignin and its fraction are esterified by levulinic acid to introduce active ketone groups and subsequently condensed with oleylamine (OAm) and bis(3-aminopropyl)-terminated polydimethylsiloxane (PDMS) via a catalyst-free Schiff-base reaction to form grafted lignin-OAm copolymers and cross-linked lignin-PDMS polymer networks (MKL-P and MFL-P), respectively. Results show that lignin-OAm polyimines can be self-repaired and hot reprocessed under pressure, while lignin-PDMS polyimines can be repaired with the assistance of a healing agent, heat, and pressure. Dynamic mechanical analyses demonstrate that the stress–relaxation behaviors of the polyimines follow the Arrhenius law under thermal-stress activation, indicating the occurrence of transimination. Moreover, compared with Kraft lignin, the lignin fraction ameliorates the grafting density of ketones and enhances the cross-linking density of lignin-PDMS polyimine networks. The higher cross-linking density of MFL-P leads to superior stress–relaxation activation energy, thermal stability, hydrophobicity, and light-shielding ability but inferior repairability and translucency. Finally, this work provides insights into the polymerization of lignin-based polymer networks and the potential application of lignin-PDMS polyimines for repairable, translucent, anti-UV, and hydrophobic coatings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Tunable analog thermal material

Naturally-occurring thermal materials usually possess specific thermal conductivity ($\textit{κ}$), forming a digital set of $\textit{κ}$ values. Emerging thermal metamaterials have been deployed to realize effective thermal conductivities unattainable in natural materials. However, the effective thermal conductivities of such mixing-based thermal metamaterials are still in digital fashion, i.e., the effective conductivity remains discrete and static. Here, we report an analog thermal material whose effective conductivity can be in-situ tuned from near-zero to near-infinity $\textit{κ}$. The proof-of-concept scheme consists of a spinning core made of uncured polydimethylsiloxane (PDMS) and fixed bilayer rings made of silicone grease and steel. Thanks to the spinning PDMS and its induced convective effects, we can mold the heat flow robustly with continuously changing and anisotropic $\textit{κ}$. Our work enables a single functional thermal material to meet the challenging demands of flexible thermal manipulation. It also provides platforms to investigate heat transfer in systems with moving components.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Predicting 3D moisture sorption behavior of materials from 1D investigations

Abstract Moisture in materials can be a source of future outgassing and exacerbate unwanted changes in physical and chemical properties. Here, we investigate the effect of sample size and shape on the moisture transport phenomena through a combined experimental and modeling approach. Several different materials varying in size and shape were investigated over a wide range of relative humidities (0–90%) and temperatures ( $$30{-}70^{\,\circ } \hbox {C}$$ 30 - 70 ∘ C ) using gravimetric type dynamic vapor sorption (DVS). A dynamic triple-mode sorption model, developed previously, was employed to describe the experimental results with good success; the model includes absorption, adsorption, pooling (clustering) of species, and molecular diffusion. Here we show that the full triple-mode sorption model is robust enough to predict the dynamic uptake and outgassing of 3-dimensional (3D) samples using parameters derived from quasi-1D samples. This successful demonstration on three different materials (filled polydimethylsiloxane (PDMS), unfilled PDMS, and ceramic inorganic composite) illustrates that the model is robust at describing the scale-independent physics and chemistry of moisture sorption and diffusion materials. This work demonstrates that while sorption mechanisms manifest in testing of all sample sizes, some of these mechanisms were so subtle that they were overlooked in our initial modeling and assessment, illustrating the importance of multi-scale experiments in the development of robust predictive capabilities. Our study also outlines the challenges and viable solutions for global optimization of a multi-parameter model. The ability to quantify moisture sorption and diffusion, independent of scale, using 1D lab-scale experiments enables prediction of long-term bulk materials behavior in real applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

On the mechanism of marine fouling-prevention performance of oil-containing silicone elastomers

For many decades, silicone elastomers with oil incorporated have served as fouling-release coating for marine applications. In a comprehensive study involving a series of laboratory-based marine fouling assays and extensive global field studies of up to 2-year duration, we compare polydimethylsiloxane (PDMS) coatings of the same composition loaded with oil via two different methods. One method used a traditional, one-pot pre-cure oil addition approach (o-PDMS) and another method used a newer post-cure infusion approach (i-PDMS). The latter displays a substantial improvement in biofouling prevention performance that exceeds established commercial silicone-based fouling-release coating standards. We interpret the differences in performance between one-pot and infused PDMS by developing a mechanistic model based on the Flory–Rehner theory of swollen polymer networks. Using this model, we propose that the chemical potential of the incorporated oil is a key consideration for the design of future fouling-release coatings, as the improved performance is driven by the formation and stabilization of an anti-adhesion oil overlayer on the polymer surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Selective sequential infiltration synthesis of ZnO in the liquid crystalline phase of silicon-containing rod-coil block copolymers

The combination of block copolymer (BCP) thin film self-assembly and selective infiltration synthesis of inorganic materials into one BCP block provides access to various organic–inorganic hybrids. Here, we apply sequential infiltration synthesis, a vapor-phase hybridization technique, to selectively introduce ZnO into the organic microdomains of silicon-containing rod-coil diblock copolymers and a triblock terpolymer, polydimethylsiloxane (PDMS)-b-poly{2,5-bis[(4-methoxyphenyl)-oxycarbonyl]styrene} (PDMS-b-PMPCS) and PDMS-b-polystyrene-b-PMPCS (PDMS-b-PS-b-PMPCS), in which the PMPCS rod block is a liquid crystalline polymer. The in-plane cylindrical PDMS-b-PMPCS and core–shell cylindrical and hexagonally perforated lamellar PDMS-b-PS-b-PMPCS films were infiltrated with ZnO with high selectivity to the PMPCS. The etching contrast between PDMS, PS and the ZnO-infused PMPCS enables the fabrication of ZnO/SiO x binary composites by plasma etching and reveals the core–shell morphology of the triblock terpolymer.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Optimizing the accuracy of viscoelastic characterization with AFM force–distance experiments in the time and frequency domains

Atomic Force Microscopy (AFM) force-distance (FD) experiments have emerged as an attractive alternative to traditional micro-rheology measurement techniques owing to their versatility of use in materials of a wide range of mechanical properties. Here, we show that the range of time dependent behaviour which can reliably be resolved from the typical method of FD inversion (fitting constitutive FD relations to FD data) is inherently restricted by the experimental parameters: sampling frequency, experiment length, and strain rate. Specifically, we demonstrate that violating these restrictions can result in errors in the values of the parameters of the complex modulus. In the case of complex materials, such as cells, whose behaviour is not specifically understood a priori, the physical sensibility of these parameters cannot be assessed and may lead to falsely attributing a physical phenomenon to an artifact of the violation of these restrictions. We use arguments from information theory to understand the nature of these inconsistencies as well as devise limits on the range of mechanical parameters which can be reliably obtained from FD experiments. The results further demonstrate that the nature of these restrictions depends on the domain (time or frequency) used in the inversion process, with the time domain being far more restrictive than the frequency domain. Lastly, we demonstrate how to use these restrictions to better design FD experiments to target specific timescales of a material's behaviour through our analysis of a polydimethylsiloxane (PDMS) polymer sample.

information theory↗
DOE OSTI2023

Investigating structure and dynamics of unentangled poly(dimethyl- co -diphenyl)siloxane via molecular dynamics simulation

Polysiloxane is one of the most important polymeric materials in technological use. Polydimethylsiloxane displays glass-like mechanical properties at low temperatures. Incorporation of phenyl siloxane, via copolymerization for example, improves not only the low-temperature elasticity but also enhances its performance over a wide range of temperatures. Copolymerization with the phenyl component can significantly change the microscopic properties of polysiloxanes, such as chain dynamics and relaxation. However, despite much work in the literature, the influence of such changes is still not clearly understood. In this work, we systematically study the structure and dynamics of random poly(dimethyl- co -diphenyl)siloxane via atomistic molecular dynamics simulations. As the molar ratio Φ of the diphenyl component increases, we find that the size of the linear copolymer chain expands. At the same time, the chain-diffusivity slows down by over an order of magnitudes. In conclusion, the reduced diffusivity appears to be a result of a complex interplay between the structural and dynamic changes induced by phenyl substitution.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Development of a coarse-grained molecular dynamics model for poly(dimethyl- co -diphenyl)siloxane

Polydimethylsiloxane is an important polymeric material with a wide range of applications. However, environmental effects like low temperature can induce crystallization in this material with resulting changes in its structural and dynamic properties. The incorporation of phenyl-siloxane components, e.g., as in a poly(dimethyl-co-diphenyl)siloxane random copolymer, is known to suppress such crystallization. Molecular dynamics (MD) simulations can be a powerful tool to understand such effects in atomistic detail. Unfortunately, all-atomistic molecular dynamics (AAMD) is limited in both spatial dimensions and simulation times it can probe. Here, to overcome such constraints and to extend to more useful length- and time-scales, we systematically develop a coarse-grained molecular dynamics (CGMD) model for the poly(dimethyl-co-diphenyl)siloxane system with bonded and non-bonded interactions determined from all-atomistic simulations by the iterative Boltzmann inversion (IBI) method. Additionally, we propose a lever rule that can be useful to generate non-bonded potentials for such systems without reference to the all-atomistic ground truth. Our model captures the structural and dynamic properties of the copolymer material with quantitative accuracy and is useful to study long-time dynamics of highly-entangled systems, sequence-dependent properties, phase behaviour, etc.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Water-stable direct air capture of CO 2 with microcapsules of task-specific ionic liquid and their electrothermal regeneration

Microcapsules of the task specific ionic liquid (TSIL) 1-ethyl-3-methylimidazolium 2-cyanopyrrolide [EMIM][2CNpyr] with composite polydimethylsiloxane (PDMS) shells were fabricated for use in CO 2 direct air capture (DAC) conditions. The TSIL was encapsulated using an oil-in-oil emulsion as a templating procedure through two different approaches. In the first approach, a PDMS-polyurea (PU) shell was constructed by interfacial polymerization, while in the second approach, a graphene oxide (GO)-PDMS shell was constructed by cross-linking GO sheets. The composition and structure of both capsule types were fully characterized, and their CO 2 DAC performance was evaluated by gravimetric and breakthrough analysis. Both capsules exhibited competitive capacities, with the PDMS-PU capsules and the GO-PDMS capsules reaching 0.75 mol kg −1 and 0.66 mol kg −1 , respectively. We further demonstrate that both capsule systems can be regenerated with complementary electrothermal methods. Microwave (MW) regeneration was used for the PDMS-PU capsules, effectively releasing absorbed CO 2 in less than an hour. Owing to the electrical conductivity of GO, GO-PDMS capsules were regenerated via radio frequency heating (RF). This work highlights the importance and opportunity of tuning solid–liquid composite performance for advanced applications, including direct air capture of carbon dioxide.

Al-Mahbobi, Luma [Texas A&M University, College St↗
DOE OSTI2022

Dynamics of bottlebrush polymers

Bottlebrushes are an interesting class of polymers which shows intriguing material properties often associated with dynamics. While dynamical phenomena in linear polymers are well understood and existing theories can describe them in a good way, bottlebrush dynamics have only rarely been investigated. Therefore, we performed dielectric spectroscopy and quasi-elastic neutron scattering to study the dynamics of polydimethylsiloxane-based bottlebrush polymers, PDMS-g-PDMS focusing mostly on the segmental dynamics of the side chains. Comparing the relaxation times of the α – relaxation, tracked with dielectric spectroscopy, of bottlebrush polymers with those of their respective linear side chains show a slowing down once the side chains are attached to the backbone. This effect diminishes and finally vanishes with increasing side chain length. The time and length scale, offered by quasi-elastic neutron scattering, fits for the segmental dynamics together with faster processes. The Q -dependence of the segmental relaxation times allows to classify bottlebrush polymers as heterogenous including a non-Gaussian character. For such a dynamical system, the mean square displacement needs to be separated into single processes before an overall mean square displacement can be generated by applying the time temperature superposition principle.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Dispersion of surface-modified, aggregated, fumed silica in polymer nanocomposites

Surface modification of model silica to enhance compatibility in nanocomposites has been widely studied. In addition to model spherical silica, several authors have investigated the impact of surface conditions on compatibility in commercial aggregated carbon black and silica. Here, dispersion is investigated for a series of nanocomposites produced from commercially modified fumed silica mixed with styrene butadiene rubber, polystyrene, and polydimethylsiloxane. Surface modification includes variation in surface hydroxyl content, siloxane, and silane treatment. Qualitatively, hydroxyl groups on the silica surface are considered incompatible with non-polar polymers, while methyl groups are compatible with oleophilic polymers. X-ray scattering was used to analyze the filler aggregate structure before and after dispersion, and the second virial coefficient was used to quantify nanodispersion. The content of surface moieties was determined from Fourier-transform infrared spectroscopy. It is observed that modified silica can display mean field or specific interactions as reflected by the presence of a correlation peak in x-ray scattering. For systems with specific interactions, a critical ordering concentration is observed related to the free energy change for structuring. A van der Waals model was used to model the second virial coefficient as a function of accumulated strain, yielding the excluded volume and an energetic term. The excluded volume could be predicted from the structural information, and the bound polymer layer was directly related to the surface methyl content, whereas the energetic term was found to synergistically depend on both the methyl and hydroxyl surface content.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Liquid metallic laser ultrasound transducer for high-temperature applications

This study aims to investigate a laser ultrasound (LUS) transducer for high-temperature (>100 °C) applications. For decades, many researchers have investigated efficient LUS transducers, yet studies on laser ultrasound transducers capable of performing at the high-temperature condition are rarely found in the literature. Most current LUS transducers still utilize a polymer-based composite material, that is, not stable at varying temperature conditions. This study introduces a liquid metallic (LM) LUS transducer that utilizes field's metal, which has a high thermal expansion (~3 × 10 -4 K -1 ). We hypothesized that such a high thermal expansion of the liquid metal can effectively produce laser-generated ultrasound waves, substituting for conventional polymer-based transducers. A numerical simulation predicted that the LM LUS transducer would produce higher LUS intensity (~22 dB) than that without the LUS transducer. Experiment results confirmed that the LM transducer effectively intensifies the ultrasound wave signals, obtaining a signal-to-noise gain over 30 dB. Moreover, the transducer was found capable of transmitting detectable wave packets in relatively high-temperature conditions (~400 °C), while conventional candle soot nanoparticle-polydimethylsiloxane could not perform stably at these elevated temperatures. The investigations introduced in this article are scientifically significant since we demonstrated the engineering feasibility of liquid metallic materials for LUS transducers.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Dynamics of amphiphilic PEG–PDMS–PEG triblock copolymer assemblies

Here, the size and stability of micelles and vesicles determine the uptake capacity of guest molecules, thereby influencing potential applications in drug/gene delivery, bioreactors, and templates for nanoparticle synthesis. Polyethylene glycol (PEG) and polydimethylsiloxane (PDMS) are commonly used in these applications. We discovered that PEG-PDMS-PEG triblock copolymers can assemble into micelles and vesicles, making them valuable for dynamic studies to derive the bending elasticity, $κ_η$, which governs the stability these objects. We analyzed the structure using cryogenic transmission electron microscopy and small-angle neutron scattering. We investigated the dynamics through dynamic light scattering and neutron spin echo spectroscopy. By varying the number of repeating units in the hydrophilic block, we created micellar (PEG 28 -PDMS 15 -PEG 28 ) and vesicular systems (PEG 14 -PDMS 15 -PEG 14 ). For the vesicle, membrane rigidity was determined from experiments to be $κ_η$ =(16 ± 2) $k_BT$, where $k_BT$ is the thermal energy ($k_B$ Boltzmann’s constant and T is the temperature). According to Zilman and Granek's concept, membrane rigidity reflects height-height fluctuations within the membrane layer. Compared to polymers at the oil-water interface of a microemulsion, the membrane rigidity in polymersomes is over an order of magnitude higher, indicating significantly enhanced stability. This value closely aligns with that of liposomes, suggesting similar stability between polymersomes and liposomes.

Gupta, Sudipta [Louisiana State Univ., Baton Rouge↗