Search NASA⌕ Search

SEARCH · Search NASA

Results for “Precision relative navigation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Cobalt: Development and Maturation of GN&C Technologies for Precision Landing

The CoOperative Blending of Autonomous Landing Technologies (COBALT) instrument is a terrestrial test platform for development and maturation of guidance, navigation and control (GN&C) technologies for precision landing. The project is developing a third-generation Langley Research Center (LaRC) navigation doppler lidar (NDL) for ultra-precise velocity and range measurements, which will be integrated and tested with the Jet Propulsion Laboratory (JPL) lander vision system (LVS) for terrain relative navigation (TRN) position estimates. These technologies together provide precise navigation knowledge that is critical for a controlled and precise touchdown. The COBALT hardware will be integrated in 2017 into the GN&C subsystem of the Xodiac rocket-propulsive vertical test bed (VTB) developed by Masten Space Systems, and two terrestrial flight campaigns will be conducted: one open-loop (i.e., passive) and one closed-loop (i.e., active).

Carson, John M.↗
NASA NTRS1987

Mathematical Models for Doppler Measurements

Error analysis increases precision of navigation. Report presents improved mathematical models of analysis of Doppler measurements and measurement errors of spacecraft navigation. To take advantage of potential navigational accuracy of Doppler measurements, precise equations relate measured cycle count to position and velocity. Drifts and random variations in transmitter and receiver oscillator frequencies taken into account. Mathematical models also adapted to aircraft navigation, radar, sonar, lidar, and interferometry.

Lear, William M.↗
NASA NTRS1989

Space vehicle thermal testing: Principles, practices and effectiveness

Component qualification and acceptance temperatures are derived from worst case thermal analyses and analytic uncertainty margin subject to certain specified temperature extremes. Temperature requirements are shown for equipment operation within specification and for survival and turn-on (need not operate within specification, but must not experience any degradation when returned to operational range). Temperature excursions for most equipment are seen to be 20 to 50 C above and below room temperature. Components without active electronics which are mounted outboard, such as solar arrays and antennas, are usually designed to withstand wider temperature excursions, particularly at the cold end. Batteries are tightly controlled at cold temperatures to increase life. Payload components such as extremely accurate clocks for precise navigation are controlled over a relatively narrow temperature range.

Gluck, Donald F.↗
NASA NTRS2015

Flight Testing a Real-Time Hazard Detection System for Safe Lunar Landing on the Rocket-Powered Morpheus Vehicle

The Hazard Detection System (HDS) is a component of the ALHAT (Autonomous Landing and Hazard Avoidance Technology) sensor suite, which together provide a lander Guidance, Navigation and Control (GN&C) system with the relevant measurements necessary to enable safe precision landing under any lighting conditions. The HDS consists of a stand-alone compute element (CE), an Inertial Measurement Unit (IMU), and a gimbaled flash LIDAR sensor that are used, in real-time, to generate a Digital Elevation Map (DEM) of the landing terrain, detect candidate safe landing sites for the vehicle through Hazard Detection (HD), and generate hazard-relative navigation (HRN) measurements used for safe precision landing. Following an extensive ground and helicopter test campaign, ALHAT was integrated onto the Morpheus rocket-powered terrestrial test vehicle in March 2014. Morpheus and ALHAT then performed five successful free flights at the simulated lunar hazard field constructed at the Shuttle Landing Facility (SLF) at Kennedy Space Center, for the first time testing the full system on a lunar-like approach geometry in a relevant dynamic environment. During these flights, the HDS successfully generated DEMs, correctly identified safe landing sites and provided HRN measurements to the vehicle, marking the first autonomous landing of a NASA rocket-powered vehicle in hazardous terrain. This paper provides a brief overview of the HDS architecture and describes its in-flight performance.

Avoidance↗
NASA NTRSDate not supplied

High Resolution Terrain Sensing Lidar for Precision Navigation and Safe Landing of Space and Aerial Vehicles

A 3-D imaging flash lidar sensor employing a resolution enhancement algorithm is being developed at NASA Langley Research Center for providing Terrain Relative Navigation and Hazard Avoidance capabilities onboard spacecraft landing on the Moon, Mars, and other planetary bodies. This lidar sensor, we refer to as Terrain Sensing Lidar (TSL), is a solution for future missions that require landing at pre-designated sites near high value resources or at areas of high scientific value, while avoiding hazardous terrain features, such as escarpments, craters, slopes, and rocks, or pre-deployed assets. TSL can also benefit terrestrial applications such as autonomous aerial vehicles without reliance on signals from Global Positioning System (GPS). The feasibility of the TSL concept has been shown through a series of drone, fixed-wing aircraft, and helicopter flight tests. A prototype version of the TSL has been recently assembled for conducting another set of flight tests to demonstrate its readiness for upcoming landing missions. This paper describes the TSL, provides its performance parameters, and explains its operational concepts for landing missions.

Precision Navigation↗
NASA NTRS1984

Application of differential GPS to civil helicopter terminal guidance

NASA is conducting a research program to evaluate differential Global Positioning System (GPS) concepts for civil helicopter navigation. It is pointed out that the civil helicopter community will probably be an early user of GPS because of the unique mission operations in areas where precise navigation aids are not available. Applications with very demanding accuracy requirements are related to remote area search and rescue, offshore oil platform approach, remote area precision landing, and other precise navigation operations. Differential GPS appears to provide a solution for meeting the accuracy requirements involved in the considered operations. The present investigation is concerned with results obtained in three areas studied in connection with the conducted research program. Attention is given to mission-tailored satellite selection, a satellite selection algorithm concept, satellite selection algorithm simulation results, and differential GPS ground station design.

Denaro, R. P.↗
NASA NTRS2016

COBALT CoOperative Blending of Autonomous Landing Technology

COBALT is a terrestrial test platform for development and maturation of GN&C (Guidance, Navigation and Control) technologies for PL&HA (Precision Landing and Hazard Avoidance). The project is developing a third generation, Langley Navigation Doppler Lidar (NDL) for ultra-precise velocity and range measurements, which will be integrated and tested with the JPL Lander Vision System (LVS) for Terrain Relative Navigation (TRN) position estimates. These technologies together provide navigation that enables controlled precision landing. The COBALT hardware will be integrated in 2017 into the GN&C subsystem of the Xodiac rocket-propulsive Vertical Test Bed (VTB) developed by Masten Space Systems (MSS), and two terrestrial flight campaigns will be conducted: one open-loop (i.e., passive) and one closed-loop (i.e., active).

Carson, John M. III↗
NASA NTRS2011

Lidar Systems for Precision Navigation and Safe Landing on Planetary Bodies

The ability of lidar technology to provide three-dimensional elevation maps of the terrain, high precision distance to the ground, and approach velocity can enable safe landing of robotic and manned vehicles with a high degree of precision. Currently, NASA is developing novel lidar sensors aimed at needs of future planetary landing missions. These lidar sensors are a 3-Dimensional Imaging Flash Lidar, a Doppler Lidar, and a Laser Altimeter. The Flash Lidar is capable of generating elevation maps of the terrain that indicate hazardous features such as rocks, craters, and steep slopes. The elevation maps collected during the approach phase of a landing vehicle, at about 1 km above the ground, can be used to determine the most suitable safe landing site. The Doppler Lidar provides highly accurate ground relative velocity and distance data allowing for precision navigation to the landing site. Our Doppler lidar utilizes three laser beams pointed to different directions to measure line of sight velocities and ranges to the ground from altitudes of over 2 km. Throughout the landing trajectory starting at altitudes of about 20 km, the Laser Altimeter can provide very accurate ground relative altitude measurements that are used to improve the vehicle position knowledge obtained from the vehicle navigation system. At altitudes from approximately 15 km to 10 km, either the Laser Altimeter or the Flash Lidar can be used to generate contour maps of the terrain, identifying known surface features such as craters, to perform Terrain relative Navigation thus further reducing the vehicle s relative position error. This paper describes the operational capabilities of each lidar sensor and provides a status of their development. Keywords: Laser Remote Sensing, Laser Radar, Doppler Lidar, Flash Lidar, 3-D Imaging, Laser Altimeter, Precession Landing, Hazard Detection

Amzajerdian, Farzin↗
NASA NTRS1992

GPS Measurement Of Attitude

Signals transmitted by satellites of Global Positioning System (GPS) measure orientation of baseline on ship, aircraft, or other vehicle with accuracy. Two GPS antennas and receivers placed at well separated points on platform. Receivers measure positions of ends of baseline as functions of time. Output processor computes vector difference between two positions and determines orientation of baseline. Combined with conventional GPS data, orientation data allows more precise navigation and mapping and enhances calculations related to performance and control of vehicle.

Dinardo, S. J.↗
NASA NTRSDate not supplied

Navigation Doppler Lidar

A Doppler lidar has been developed by NASA as an alternative to radars for providing velocity and altitude data to landing vehicles. Future robotic and manned missions to planetary bodies demand precise ground-relative velocity vector and altitude data to execute complex descent maneuvers for safe, soft and pinpoint landing at a pre-designated site. This lidar sensor, referred to as Navigation Doppler Lidar (NDL), provides velocity and altitude data from over five kilometers altitude to within a few cm/sec and tens of centimeters precision, respectively. NDL technology will be demonstrated on two lunar landing missions this year that will serve as precursors for large robotic and manned landing missions to the Moon, Mars, and other solar system destinations. NDL can also benefit terrestrial aerial vehicles that cannot rely on the GPS for position and velocity data or require precision data relative to local ground.

Doppler Lidar↗
NASA NTRS1973

Study of effects of uncertainties on comet and asteroid encounter and contact guidance requirements. Part 1: Guidance and navigation studies

A guidance algorithm that provides precise rendezvous in the deterministic case while requiring only relative state information is developed. A navigation scheme employing only onboard relative measurements is built around a Kalman filter set in measurement coordinates. The overall guidance and navigation procedure is evaluated in the face of measurement errors by a detailed numerical simulation. Results indicate that onboard guidance and navigation for the terminal phase of rendezvous is possible with reasonable limits on measurement errors.

Source record↗
NASA NTRSDate not supplied

Lidar-Based Safe Site Relative Navigation

There has been a renewed focus in exploration of the lunar surface and maximizing scientific potential of such missions is made possible in part by minimizing the time required to set up operations; that is, reducing transit time on the surface by increasing the landing precision with respect to the intended target. Established SPLICE project precision landing requirements necessitate a navigation filter architecture and underlying models developed specifically with these needs in mind. To date, test flights to characterize SPLICE GNC system performance have not provided a means to divert from the a priori selected landing site due to hazardous conditions. With the inclusion of a new sensor, the HDL, coupled with safe landing site selection algorithms, GNC can divert from the originally planned trajectory and navigate relative to the new targeted landing site. This work presents a novel hazard relative measurement model and covariance transformation methodology that enable the navigation system to inform a safe-site relative guidance profile to meet project precision landing goals.

Navigation↗
NASA NTRS2016

An Inertial Dual-State State Estimator for Precision Planetary Landing with Hazard Detection and Avoidance

The navigation filter architecture successfully deployed on the Morpheus flight vehicle is presented. The filter was developed as a key element of the NASA Autonomous Landing and Hazard Avoidance Technology (ALHAT) project and over the course of 15 free fights was integrated into the Morpheus vehicle, operations, and flight control loop. Flight testing completed by demonstrating autonomous hazard detection and avoidance, integration of an altimeter, surface relative velocity (velocimeter) and hazard relative navigation (HRN) measurements into the onboard dual-state inertial estimator Kalman flter software, and landing within 2 meters of the vertical testbed GPS-based navigation solution at the safe landing site target. Morpheus followed a trajectory that included an ascent phase followed by a partial descent-to-landing, although the proposed filter architecture is applicable to more general planetary precision entry, descent, and landings. The main new contribution is the incorporation of a sophisticated hazard relative navigation sensor-originally intended to locate safe landing sites-into the navigation system and employed as a navigation sensor. The formulation of a dual-state inertial extended Kalman filter was designed to address the precision planetary landing problem when viewed as a rendezvous problem with an intended landing site. For the required precision navigation system that is capable of navigating along a descent-to-landing trajectory to a precise landing, the impact of attitude errors on the translational state estimation are included in a fully integrated navigation structure in which translation state estimation is combined with attitude state estimation. The map tie errors are estimated as part of the process, thereby creating a dual-state filter implementation. Also, the filter is implemented using inertial states rather than states relative to the target. External measurements include altimeter, velocimeter, star camera, terrain relative navigation sensor, and a hazard relative navigation sensor providing information regarding hazards on a map generated on-the-fly.

Bishop, Robert H.↗
NASA NTRS2016

COBALT: A GN&C Payload for Testing ALHAT Capabilities in Closed-Loop Terrestrial Rocket Flights

The COBALT (CoOperative Blending of Autonomous Landing Technology) payload is being developed within NASA as a risk reduction activity to mature, integrate and test ALHAT (Autonomous precision Landing and Hazard Avoidance Technology) systems targeted for infusion into near-term robotic and future human space flight missions. The initial COBALT payload instantiation is integrating the third-generation ALHAT Navigation Doppler Lidar (NDL) sensor, for ultra high-precision velocity plus range measurements, with the passive-optical Lander Vision System (LVS) that provides Terrain Relative Navigation (TRN) global-position estimates. The COBALT payload will be integrated onboard a rocket-propulsive terrestrial testbed and will provide precise navigation estimates and guidance planning during two flight test campaigns in 2017 (one open-loop and closed- loop). The NDL is targeting performance capabilities desired for future Mars and Moon Entry, Descent and Landing (EDL). The LVS is already baselined for TRN on the Mars 2020 robotic lander mission. The COBALT platform will provide NASA with a new risk-reduction capability to test integrated EDL Guidance, Navigation and Control (GN&C) components in closed-loop flight demonstrations prior to the actual mission EDL.

Carson, John M., III↗
NASA NTRS1972

Study of advanced system for position location and navigation

Concepts are investigated for improving location precision and system capacity relative to current satellite based data collection and location systems. The TRILOC concept provides either or both improvements in location and system capacity by utilizing three measurements acquired during a single transmission from a platform for location purposes. The location algorithm is developed, and range differences are measured onboard the satellite. An error analysis then relates platform location errors to the precision with which the measurements are made. The second concept is to increase system capacity by means of directive antennas onboard the satellite for reducing interference and/or reducing platform power. The potential advantages and disadvantages of both sweeping and fixed directive antennas for random access systems are evaluated.

Source record↗
NASA NTRS2018

Cobalt: Terrestrial Flight Test of Landing Navigation Using Lander Vision System with Navigation Doppler Lidar

COBALT (CoOperative Blending of Autonomous Landing Technologies) is a NASA technology development and test program to advance precision landing capabilities for future soft landers. The COBALT payload demonstrated terrain relative navigation utilizing the Lander Vision System and Navigation Doppler Lidar sensors on the Masten Space Systems Xodiac rocket. In spring 2017, the program culminated in two open-loop free flights to 500 m altitude with downrange diverts of 300 m. The COBALT system performed well, navigating within meters of the Xodiac vehicle’s GPS-based solution. This paper outlines details of the navigation filter and its performance during the test campaign.

Carson, John M. III↗
NASA NTRS2001

Rocket sled testing of a prototype terrain-relative navigation system

The next generation of Martian landers (2007 and beyond) will employ a precision soft-landing capability that will make it possible to explore previously inaccessible regions on the surface of Mars. This capability will be enabled by onboard systems that automatically identify and avoid terrain containing steep slopes or rocks exceeding a particular terrain height. JPL is currently developing such a hazard detection and avoidance system; this system will map the landing zone with a scanning laser radar, identify hazards, select a safe landing zone, and then guide the vehicle to the selected landing area. This paper describes how one component of this system-hazard detection-is being tested using a rocket sled and simulated Martian terrain.

lidar↗