Search NASA⌕ Search

SEARCH · Search NASA

Results for “Protein adsorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Carrier-assisted One-pot Sample Preparation for Targeted Proteomics Analysis of Small Numbers of Human Cells

Protein analysis of small numbers of human cells is primarily achieved by targeted proteomics with antibody-based immunoassays, which have inherent limitations (e.g., low multiplex and unavailability of antibodies for new proteins). Mass spectrometry (MS)-based targeted proteomics has emerged as an alternative because it is antibody-free, high multiplex, and has high specificity and quantitation accuracy. Recent advances in MS instrumentation make MS-based targeted proteomics possible for multiplexed quantification of highly abundant proteins in single cells. However, there is a technical challenge for effective processing of single cells with minimal sample loss for MS analysis. To address this issue, we have recently developed a convenient protein carrier-assisted one-pot sample preparation coupled with liquid chromatography (LC) - selected reaction monitoring (SRM) termed cLC-SRM for targeted proteomics analysis of small numbers of human cells. This method capitalizes on using the combined excessive exogenous protein as a carrier and low-volume one-pot processing to greatly reduce surface adsorption losses as well as high-specificity LC-SRM to effectively address the increased dynamic concentration range due to the addition of exogeneous carrier protein. Its utility has been demonstrated by accurate quantification of most moderately abundant proteins in small numbers of cells (e.g., 10-100 cells) and highly abundant proteins in single cells. The easy-to-implement features and no need for specific devices make this method readily accessible to most proteomics laboratories. In this study, we have provided a detailed protocol for cLC-SRM analysis of small numbers of human cells including cell sorting, cell lysis and digestion, LC-SRM analysis, and data analysis. Further improvements in detection sensitivity and sample throughput are needed towards targeted single-cell proteomics analysis. We anticipate that cLC-SRM will be broadly applied to biomedical research and systems biology with the potential of facilitating precision medicine.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Phage resistance mutations in a marine bacterium impact biogeochemically relevant cellular processes

Phage–bacteria interactions shape ecology and biogeochemistry across biomes. Resistance, arising from their evolutionary arms race, is well documented for receptor mutations, but other resistance mechanisms and their ecological implications remain unexplored. Here we isolated, sequenced and characterized 13 phage-resistant mutants of marine Cellulophaga baltica (Flavobacteriia). Mechanistically, mutations in surface proteins provided broad and complete extracellular resistance against multiple phages through decreased adsorption. Intracellular mutations affecting serine, glycine and threonine metabolism produced narrower resistance against a single phage, permitting viral DNA replication, and, in one mutant, were shown to be lipid mediated. Putative ecosystem impacts inferred from in vitro experiments include: (1) altered carbon utilization for all mutants, but especially by surface ones, (2) increased metabolite secretion for one modelled intracellular mutant (including experimentally verified acetate) and (3) increased ‘stickiness’ for all mutants, with surface mutants also sedimenting faster. Our findings highlight new resistance mechanisms and suggest that the phage–host arms race could result in ecosystem-level biogeochemical impacts in marine microorganisms.

Urvoy, Marion [Ohio State University]↗
DOE OSTI2025

Protein Coatings Dictate the Dispersibility and Stability of Hydrophobic Zeolitic-Imidazolate Frameworks in Water

Metal–organic frameworks are promising materials for many biomedical technologies due to their ability to store and release large quantities of guest molecules in a predictable and tunable fashion. In biological fluids, proteins readily adsorb to the external surfaces of metal–organic framework particles through a combination of hydrophobic and electrostatic interactions. However, much remains to be understood about the nature of these protein coatings and how they influence the bulk properties of aqueous dispersions of metal–organic frameworks. Here, in this work, we show that a variety of proteins can be used to manipulate the properties of aqueous dispersions of zeolitic-imidazolate framework (ZIF) particles. Specifically, noncovalently associated protein coatings promote the formation of dispersions of hydrophobic ZIFs in water with high colloidal and hydrolytic stability, as long as the density of adsorbed proteins exceeds a critical, protein-dependent threshold. Further, these dispersions feature low viscosity and complete retention of gas carrying capacity. The wide range of properties accessible with protein coatings provides a highly modular approach to design hydrophobic metal–organic frameworks with properties tailored for specific biological applications.

adsorption↗
DOE OSTI2022

Examining polymer‐protein biophysical interactions with small‐angle x‐ray scattering and quartz crystal microbalance with dissipation

Abstract Polymer‐protein hybrids can be deployed to improve protein solubility and stability in denaturing environments. While previous work used robotics and active machine learning to inform new designs, further biophysical information is required to ascertain structure–function behavior. Here, we show the value of tandem small‐angle x‐ray scattering (SAXS) and quartz crystal microbalance with dissipation (QCMD) experiments to reveal detailed polymer‐protein interactions with horseradish peroxidase (HRP) as a test case. Of particular interest was the process of polymer‐protein complex formation under thermal stress whereby SAXS monitors formation in solution while QCMD follows these dynamics at an interface. The radius of gyration ( R g ) of the protein as measured by SAXS does not change significantly in the presence of polymer under denaturing conditions, but thickness and dissipation changes were observed in QCMD data. SAXS data with and without thermal stress were utilized to create bead models of the potential complexes and denatured enzyme, and each model fit provided insight into the degree of interactions. Additionally, QCMD data demonstrated that HRP deforms by spreading upon surface adsorption at low concentration as shown by longer adsorption times and smaller frequency shifts. In contrast, thermally stressed and highly inactive HRP had faster adsorption kinetics. The combination of SAXS and QCMD serves as a framework for biophysical characterization of interactions between proteins and polymers which could be useful in designing polymer‐protein hybrids.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Inhibition of Extracellular Enzyme Activity by Reactive Oxygen Species upon Oxygenation of Reduced Iron-Bearing Minerals

The dual roles of minerals in inhibiting and prolonging extracellular enzyme activity in soils and sediments are governed by enzyme adsorption to mineral surface. Oxigenation of mineral-bound Fe(II) generates reactive oxygen species (ROS), yet it is unknown whether and how this process alters the activity and functional lifespan of extracellular enzymes. Here, the effect of mineral-bound Fe(II) oxidation on the hydrolytic activity of a cellulose-degrading enzyme ß-glucosidase (BG) was studied using two pre-reduced Fe-bearing clay minerals (nontronite and montmorillonite) and one pre-reduced iron oxide (magnetite) at pH 5 and 7. Under anoxic condition, BG adsorption to mineral surface decreased its activity but prolonged its lifespan. Under oxic condition, ROS was produced, with the amount of •OH, the most abundant ROS, being positively correlated with the extent of structural Fe(II) oxidation in reduced minerals. •OH decreased BG activity and shortened its lifespan via conformational change and structural decomposition of BG. These results suggest that under oxic condition the ROS-induced inhibitory role of Fe(II)-bearing minerals outweighed their adsorption-induced protective role in controlling enzyme activity. These results disclose a previously unknown mechanism of extracellular enzyme inactivation, which have pivotal implications for predicting the active enzyme pool in redox-oscillating environments.

58 GEOSCIENCES↗
DOE OSTI2024

Overexpression of human ACE2 protein in mouse fibroblasts stably transfected with the intact ACE2 gene

Infection by SARS-CoV-2 is dependent on binding of the viral spike protein to angiotensin converting enzyme 2 (ACE2), a membrane glycoprotein expressed on epithelial cells in the human upper respiratory tract. Recombinant ACE2 protein has potential application for anti-viral therapy. Here we co-transfected mouse fibroblasts (A9 cells) with a cloned fragment of human genomic DNA containing the intact ACE2 gene and an unlinked neomycin phosphotransferase gene, and then selected stable neomycin-resistant transfectants. Transfectant clones expressed ACE2 protein at levels that were generally proportional to the number of ACE2 gene copies integrated in the cell genome, ranging up to approximately 50 times the level of ACE2 present of Vero-E6 cells. Cells overexpressing ACE2 were hypersensitive to infection by spike-pseudotyped vesicular stomatitis virus (VSV-S), and adsorption of VSV-S to these cells occurred at an accelerated rate compared to Vero-E6 cells. In conclusion, the transfectant cell clones described here therefore have favorable attributes as feedstocks for large-scale production of recombinant human ACE2 protein.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Water-Soluble Flexible Organic Frameworks That Include and Deliver Proteins

Four water-soluble hydrazone-based three-dimensional (3D) flexible organic frameworks FOF-1-4 have been synthesized from a semirigid tetracationic tetraaldehyde and four flexible dihydrazides. 1 H NMR spectroscopy indicated the quantitative formation of FOF-1-4 in D 2 O, while dynamic light scattering experiments revealed that, depending on the concentration, these porous frameworks display hydrodynamic diameters ranging from 50 to 120 nm. The porosity of the frameworks is confirmed by ethanol vapor adsorption experiments of the solid samples as well as the high loading capacity for a 2.3 nm porphyrin guest in water. The new water-soluble frameworks exhibit low cytotoxicity and form inherent pores with diameters of 5.3 or 6.7 nm, allowing rapid inclusion of proteins such as bovine serum albumin and green and orange fluorescent proteins, and efficient delivery of the proteins into normal and cancer cells. Flow cytometric analysis reveals percentages of the delivered cells up to 99.8%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Enzyme interactions on lignocellulosic biomass structure

This chapter shows that, although well studied over the years, the cellulose enzymatic hydrolysis process has still many obstacles to be overcome or minimized. High enzyme loading and relatively long incubation periods are generally required for effective cellulose saccharification to be achieved. These limitations make the process unattractive from an economic perspective. Most studies show that the conversion rate of cellulose hydrolysis decreases over reaction time due to several factors that may inhibit, deactivate, or slow the work of enzymes. Some of these factors are inhibition by the product generated; inhibition/deactivation of enzymes by by-products generated during pretreatment (PT); limitation of mass transfer; shear stress by high stirring; air–liquid interfacial area; and unproductive adsorption on lignin or other compounds present in the biomass. The interaction between cellulases and the lignin present in these biomasses has a major negative impact on the process, with the source of the raw material and the type of PT used having a strong influence on it. Finally, the use of nonenzymatic proteins seems to be the best way to mitigate this problem.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Surfactant-assisted one-pot sample preparation for label-free single-cell proteomics

Large numbers of cells are generally required for quantitative global proteome profiling due to surface adsorption losses associated with sample processing. Such bulk measurement obscures important cell-to-cell variability (cell heterogeneity) and makes proteomic profiling impossible for rare cell populations (e.g., circulating tumor cells (CTCs)). Here we report a surfactant-assisted one-pot sample preparation coupled with mass spectrometry (MS) method termed SOP-MS for label-free global single-cell proteomics. SOP-MS capitalizes on the combination of a MS-compatible nonionic surfactant, n-Dodecyl-β-D-maltoside, and hydrophobic surface-based low-bind tubes or multi-well plates for ‘all-in-one’ one-pot sample preparation. This ‘all-in-one’ method including elimination of all sample transfer steps maximally reduces surface adsorption losses for effective processing of single cells, thus improving detection sensitivity for single-cell proteomics. This method allows convenient label-free quantification of hundreds of proteins from single human cells and ~1200 proteins from small tissue sections (close to ~20 cells). When applied to a patient CTC-derived xenograft (PCDX) model at the single-cell resolution, SOP-MS can reveal distinct protein signatures between primary tumor cells and early metastatic lung cells, which are related to the selection pressure of anti-tumor immunity during breast cancer metastasis. The approach paves the way for routine, precise, quantitative single-cell proteomics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Structural basis for the mechanisms of human presequence protease conformational switch and substrate recognition

Presequence protease (PreP), a 117kDa mitochondrial M16C metalloprotease vital for mitochondrial proteostasis, degrades presequence peptides cleaved off from nuclear-encoded proteins and other aggregation-prone peptides, such as amyloid β (Aβ). PreP structures have only been determined in a closed conformation; thus, the mechanisms of substrate binding and selectivity remain elusive. Here, we leverage advanced vitrification techniques to overcome the preferential denaturation of one of two ~55 kDa homologous domains of PreP caused by air-water interface adsorption. Thereby, we elucidate cryoEM structures of three apo-PreP open states along with Aβ- and citrate synthase presequence-bound PreP at 3.3–4.6 Å resolution. Together with integrative biophysical and pharmacological approaches, these structures reveal the key stages of the PreP catalytic cycle and how the binding of substrates or PreP inhibitor drives a rigid body motion of the protein for substrate binding and catalysis. Together, our studies provide key mechanistic insights into M16C metalloproteases for future therapeutic innovations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Phage K gp102 Drives Temperature-Sensitive Antibacterial Activity on USA300 MRSA

There is widespread interest in using obligately lytic bacteriophages (“phages”) to treat human bacterial infections. Among Staphylococcus aureus infections, the USA300 lineage is a frequent cause of invasive disease. We observed that phage K, a model S. aureus myophage, exhibits temperature-sensitive growth on USA300 strains, with the wild-type phage providing poorer growth suppression in broth and forming smaller and fainter plaques at 37 °C vs. 30 °C. We isolated 65 mutants of phage K that had improved plaquing characteristics at 37 °C when compared to the parental phage. In all 65 mutants, this phenotype was attributable to loss-of-function (LoF) mutations in gp102, which encodes a protein of unknown function that has homologs only among the Herelleviridae (SPO1-like myophages infecting gram-positive bacteria). Additional experiments with representative mutants consistently showed that the temperature-sensitive plaque phenotype was specific to USA300 MRSA strains and that Gp102 disruption was correlated with improved suppression of bacterial growth in broth and improved antibacterial activity in a mouse model of upper respiratory tract infection. The same genotype and in vitro phenotypes could be replicated in close relatives of phage K. Gp102 disruption did not have a detectable effect on adsorption but did delay cell culture lysis relative to wild-type under permissive infection conditions, suggesting that gp102 conservation might be maintained by selective pressure for more rapid replication. Expression of gp102 on a plasmid was toxic to both an MSSA and a USA300 MRSA strain. Molecular modeling predicts a protein with two helix-turn-helix domains that displays some similarity to DNA-binding proteins such as transcription factors. While its function remains unclear, gp102 is a conserved gene that is important to the infection process of Kayvirus phages, and it appears that the manner in which USA300 strains defend against them at 37 °C can be overcome by gp102 LoF mutations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Electropolymerized-molecularly imprinted polymers (E-MIPS) as sensing elements for the detection of dengue infection

Here, a straightforward in situ detection method for dengue infection was demonstrated through the molecular imprinting of a dengue nonstructural protein 1 (NS1) epitope into an electropolymerized molecularly imprinted polyterthiophene (E-MIP) film sensor. The key enabling step in the sensor fabrication is based on an epitope imprinting strategy, in which short peptide sequences derived from the original target molecules were employed as the main template for detection and analysis. The formation of the E-MIP sensor films was facilitated using cyclic voltammetry (CV) and monitored in situ by electrochemical quartz crystal microbalance (EC-QCM). Surface properties were analyzed using different techniques including atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and polarization modulation-infrared reflection-adsorption (PM-IRRAS). The standard calibration curve (R = 0.9830) was generated for the detection of the epitope, Ac-VHTWTEQYKFQ-NH 2 , with a linear range of 0.2 to 30 μg/mL and detection limit of 0.073 μg/mL. A separate calibration curve (R = 0.9786) was obtained using spiked buffered solutions of dengue NS1 protein, which resulted in a linear range of 0.2 to 10 μg/mL and a detection limit of 0.056 μg/mL. The fabricated E-MIP sensor exhibited long-term stability, high sensitivity, and good selectivity towards the targeted molecules. These results indicated that the formation of the exact and stable cavity imprints in terms of size, shape, and functionalities was successful. In our future work, we aim to use our E-MIP sensors for NS1 detection in real-life samples such as serum and blood.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

THF co-solvent pretreatment prevents lignin redeposition from interfering with enzymes yielding prolonged cellulase activity

Background: Conventional aqueous dilute sulfuric acid (DSA) pretreatment of lignocellulosic biomass facilitates hemicellulose solubilization and can improve subsequent enzymatic digestibility of cellulose to fermentable glucose. However, much of the lignin after DSA pretreatment either remains intact within the cell wall or readily redeposits back onto the biomass surface. This redeposited lignin has been shown to reduce enzyme activity and contribute to rapid enzyme deactivation, thus, necessitating significantly higher enzyme loadings than deemed economical for biofuel production from biomass. Results: In this study, we demonstrate how detrimental lignin redeposition on biomass surface after pretreatment can be prevented by employing Co-solvent Enhanced Lignocellulosic Fractionation (CELF) pretreatment that uses THF–water co-solvents with dilute sulfuric acid to solubilize lignin and overcome limitations of DSA pretreatment. We first find that enzymatic hydrolysis of CELF-pretreated switchgrass can sustain a high enzyme activity over incubation periods as long as 5 weeks with enzyme doses as low as 2 mg protein/g glucan to achieve 90% yield to glucose. A modified Ninhydrin-based protein assay revealed that the free-enzyme concentration in the hydrolysate liquor, related to enzyme activity, remained unchanged over long hydrolysis times. DSA-pretreated switchgrass, by contrast, had a 40% drop in free enzymes in solution during incubation, providing evidence of enzyme deactivation. Furthermore, measurements of enzyme adsorption per gram of lignin suggested that CELF prevented lignin redeposition onto the biomass surface, and the little lignin left in the solids was mostly integral to the original lignin–carbohydrate complex (LCC). Scanning electron micrographs and NMR characterization of lignin supported this observation. Conclusions: Enzymatic hydrolysis of solids from CELF pretreatment of switchgrass at low enzyme loadings was sustained for considerably longer times and reached higher conversions than for DSA solids. Analysis of solids following pretreatment and enzymatic hydrolysis showed that prolonged cellulase activity could be attributed to the limited lignin redeposition on the biomass surface making more enzymes available for hydrolysis of more accessible glucan.

09 BIOMASS FUELS↗
DOE OSTI2026

Primary biomolecular adsorption energetics of core–shell nanocomplexes: Implications for biological interactions

Molecular organization at the nano-bio interface governing the colloidal stability, reactivity, immune recognition, and drug delivery performance of nanoparticles remains difficult to predict. Quantifying the primary hydration energetics of biomolecule-coated nanomaterials can determine those interactions and provide a basis for engineered nanocarriers with tailored behavior in biological systems. Here, we measured the thermodynamics of water adsorption on patchy dry magnetite (Fe 3 O 4 ) nanoparticles coated with three model biomolecules, bovine serum albumin, potato starch, and lauric acid and compared these properties to the hydration energetics of the corresponding free dry biomolecules. The results demonstrate how the surface functionalization alters the hydrophilicity, the accessible hydrophilic surface, and the interaction potential of the nanocomplex surface with biological media. The protein coating increases the interaction potential of the surface of the nanocomplex. The weaker interaction potential of the polysaccharide coating and the relatively large hydrophilic surface area allow dynamic and reversible binding, while the fatty acid rearranges into a partial bilayer with very strong hydrophilicity. The findings establish the hydration enthalpy as a quantitative basis to determine and interpret nanoparticle interactions with proteins, membranes, and biological fluids, and provide a thermodynamic foundation for designing nanocarriers with predictable biological reactivity.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Selective Adsorption of Thiol-Containing Molecules on Copper Sulfide Surfaces via Molecule–Surface Disulfide Bridges

Recent results in the fields of nanoenhanced agriculture and expanding interest in prebiotic chemistry have placed increased emphasis on understanding the chemically selective interaction of small molecules with the surfaces of metal sulfides. Here, we present an integrated experimental and computational study of the interaction of thiol-containing molecules with copper sulfide (covellite) surfaces in aqueous media. In situ Fourier-transform infrared (FTIR) measurements and ex situ X-ray photoelectron spectroscopy (XPS) measurements show that molecules bearing free thiol groups, including glutathione and cysteine, bind strongly to CuS (covellite) nanoparticles and to CuS (001) single crystals, while control studies show that similar molecules lacking the free thiol group exhibit much less binding. Additional experiments show that these thiol-containing molecules interact transiently with CuO nanoparticle surfaces but are readily removed by rinsing. The FTIR and XPS experiments demonstrate that adsorption of molecular thiols to CuS surfaces occurs in a chemically selective manner. Further experimental studies and density functional calculations show that the preferred mode of binding is through the surface S atoms, forming a Solid–S–S–Molecule disulfide linkage. While the role of disulfide linkages in controlling structure and function of proteins and other biomolecules is widely known, the formation of surface disulfide linkages as a motif for covalent molecular binding at surfaces has not been established previously.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Lanthanide binding peptide surfactants at air–aqueous interfaces for interfacial separation of rare earth elements

Rare earth elements (REEs) are critical materials to modern technologies. They are obtained by selective separation from mining feedstocks consisting of mixtures of their trivalent cation. We are developing an all-aqueous, bioinspired, interfacial separation using peptides as amphiphilic molecular extractants. Lanthanide binding tags (LBTs) are amphiphilic peptide sequences based on the EF-hand metal binding loops of calcium-binding proteins which complex selectively REEs. We study LBTs optimized for coordination to Tb 3+ using luminescence spectroscopy, surface tensiometry, X-ray reflectivity, and X-ray fluorescence near total reflection, and find that these LBTs capture Tb 3+ in bulk and adsorb the complex to the interface. Molecular dynamics show that the binding pocket remains intact upon adsorption. We find that, if the net negative charge on the peptide results in a negatively charged complex, excess cations are recruited to the interface by nonselective Coulombic interactions that compromise selective REE capture. If, however, the net negative charge on the peptide is −3, resulting in a neutral complex, a 1:1 surface ratio of cation to peptide is achieved. Surface adsorption of the neutral peptide complexes from an equimolar mixture of Tb 3+ and La 3+ demonstrates a switchable platform dictated by bulk and interfacial effects. The adsorption layer becomes enriched in the favored Tb 3+ when the bulk peptide is saturated, but selective to La 3+ for undersaturation due to a higher surface activity of the La 3+ complex.

Ortuno Macias, Luis E. (ORCID:0000000284342192)↗
DOE OSTI2024

Modifying Specific Ion Effects: Studies of Monovalent Ion Interactions with Amines

Specific ion effects in the interactions of monovalent anions with amine groups-one of the hydrophilic moieties found in proteins-were investigated using octadecylamine monolayers floating at air–aqueous solution interfaces. Here, we find that at solution pH 5.7, larger monovalent anions induce a nonzero pressure starting at higher areas/molecules, i.e., a wider “liquid expanded” region in the monolayer isotherms. Using X-ray fluorescence at near total reflection (XFNTR), an element- and surface-specific technique, ion adsorption to the amines at pH 5.7 is confirmed to be ion-specific and to follow the conventional Hofmeister series. However, at pH 4, this ion specificity is no longer observed. We propose that at the higher pH, the amine headgroups are only partially protonated, and large polarizable ions such as iodine are better able to boost amine protonation. At the lower pH, on the other hand, the monolayer is fully protonated, and electrostatic interactions dominate over ion specificity. These results demonstrate that ion specificity can be modified by changing the experimental conditions.

36 MATERIALS SCIENCE↗