Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pt monolayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Preparation of SBA-15-Supported Metals by Vapor-Phase Infiltration

A simple method is presented for incorporating various catalytic metals into the pores of SBA-15 using vapor-phase infiltration. The precursors used in Atomic Layer Deposition (ALD) for Pt, Pd, Rh, Ru, and Ni were exposed to an evacuated SBA-15, resulting in monolayer films of the adsorbed precursors inside the mesopores. The metal particles that formed after removal of the precursor ligands remained in the pores and had particle sizes ranging from 3.8 nm for Pt to 5.2 nm for Ni, as determined by Transmission Electron Microscopy (TEM), XRD, and CO chemisorption. Metal loadings for saturation exposures ranged from 5.1-wt% for Ni to 9.1-wt% for Pt; however, uniform deposition was demonstrated for lower loadings of Pd by decreasing the amount of precursor. To determine the effect of the surface composition of the mesopores, Pd particles were also added to SBA-15 that was coated with a 0.2-nm film of ZrO2.

Rh↗
DOE OSTI2022

Carbon nanotubes decorated with Pt as a viable electrocatalyst system using electrochemical atomic layer deposition

Surface limited redox replacement (SLRR) is an electrochemical deposition method designed to deposit metal thin films, typically onto other metals, that are mere monolayers in thickness, where such low dimensions allows catalyst-support interactions to affect catalyst efficiency. Here we explore the growth of Pt, using iterative Cu-mediated SLRR cycles, directly onto carbon nanotubes (CNTs) which are potentially good candidates as electrocatalyst supports due to their electrical conductivity and chemical resistance. Here scanning electron microscope images showed that Pt grew as nanoparticles, and hydrogen underpotential deposition from cyclic voltammetry showed that the active surface area approached an asymptotic value around eight iterations. Catalytic activity, measured using the oxygen reduction reaction, reached a maximum at ten iterations. Both are shown to be influenced by the growth mode, but electrochemical modeling indicates that the trend in activity is also due to a change in activation energy, possibly due to changes in Pt electronic structure due to interactions with the CNTs. Durability cycling showed a greater than 85% retention of surface area for the first 10,000 cycles of accelerated stress testing but decayed steadily to about 50% after 30,000 cycles. This performance may be related to the phenomenon that limits surface area growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Beyond the Anderson rule: importance of interfacial dipole and hybridization in van der Waals heterostructures

Vertical stacking of two-dimensional materials with weak van der Waals (vdW) interactions has laid the ground for breakthroughs in physics as well as in technological applications. Although vdW interactions dominate interlayer binding, interlayer electronic coupling may not be negligible and can lead to properties beyond the superposition of constituent monolayers. Here, studying heterobilayers of transition-metal dichalcogenides (MQ 2 ; M = Mo, Ni, Pt; Q = S, Se) by means of density functional theory calculations, we show two mechanisms that influence the band gaps of vdW heterostructures beyond the Anderson rule: (1) interfacial hybridization (mainly involving out-of-plane states, such as chalcogen p z -states), which leads to an upshift in the valence band maxima and accordingly a decrease in the band gap. (2) Formation of an interfacial electric dipole, resulting in an effective gap increase in type-II junctions. While the former is material specific, depending on the proximity of p z -states to each other and the valence band maxima, the latter can be generally described using a model based on the charge density decay outside the monolayers and the pristine band edge positions with respect to the vacuum level, irrespective of junction type.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Atomic Layer Deposition for Spatial Control of Redox Reaction Selectivity

Photocatalytic water splitting holds great potential in the pursuit of the U.S. Department of Energy's Hydrogen Shot initiative to bring the cost of H2 to $1/kg by 2031. A key challenge in the development of photocatalysts is increasing their overall solar-to-hydrogen efficiency by enhancing charge separation yields and redox selectivity. In this work, we use area selective ALD of oxide films to develop tunable interphase layers for selective oxidation and reduction reactions on a single substrate. This presentation details initial synthesis and characterization of Pt- and Au-based planar thin film electrodes in which Au regions were deactivated towards ALD growth through self-assembled thiol monolayers. The suppression of TiO2 ALD selectivity of thiols was assessed through ellipsometry, X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry. A patterned planar sample comprised of interdigitated arrays of Au and Pt, used as a surrogate for a photocatalyst particle containing two different co-catalysts, was exposed to ALD growth and removal of the inhibitor species. Scanning electrochemical microscopy (SECM) was used then to probe the local activity of different regions of the patterned surface towards the hydrogen evolution reaction (HER) and iron oxidation and correlated with the ionic and e- blocking effects of the area selective ALD coating. We will also detail the application of these findings to the ongoing development of 3D, particle-based photocatalysts.

atomic layer deposition↗
DOE OSTI2020

Predicting metal–metal interactions. I. The influence of strain on nanoparticle and metal adlayer stabilities

Strain-engineering of bimetallic nanomaterials is an important design strategy for developing new catalysts. In this paper, we introduce an approach for including strain effects into a recently introduced, density functional theory (DFT)-based alloy stability model. The model predicts adsorption site stabilities in nanoparticles and connects these site stabilities with catalytic reactivity and selectivity. Strain-based dependencies will increase the model’s accuracy for nanoparticles affected by finite-size effects. In addition to the stability of small nanoparticles, strain also influences the heat of adsorption of epitaxially grown metal-on-metal adlayers. In this respect, we successfully benchmark the strain-including alloy stability model with previous experimentally determined trends in the heats of adsorption of Au and Cu adlayers on Pt (111). For these systems, our model predicts stronger bimetallic interactions in the first monolayer than monometallic interactions in the second monolayer. We explicitly quantify the interplay between destabilizing strain effects and the energy gained by forming new metal–metal bonds. While tensile strain in the first Cu monolayer significantly destabilizes the adsorption strength, compressive strain in the first Au monolayer has a minimal impact on the heat of adsorption. Hence, this study introduces and, by comparison with previous experiments, validates an efficient DFT-based approach for strain-engineering the stability, and, in turn, the catalytic performance, of active sites in bimetallic alloys with atomic level resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Methanol Partial Oxidation on Cu(111) and PtCu(111) Single-Atom Alloy Surfaces: Effect of Surface Oxygen Coverage on Selectivity

The selective oxidation of methanol to formaldehyde on Cu surfaces is an important and well-studied reaction. However, a systematic analysis of product selectivity as a function of oxygen coverage on Cu(111) and Cu-based single-atom alloys (SAAs) has not been previously reported. In this work, we present a comprehensive investigation of deuterated methanol (CD 3 OH) partial oxidation on Cu(111) and 1% PtCu(111) SAA surfaces as a function of preadsorbed oxygen coverage. Temperature-programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS) reveal that isolated Pt atoms inhibit the initial surface oxidation of Cu(111) under low oxygen exposures. Despite this difference in oxidation kinetics, the product selectivity remains largely unaffected: on both Cu(111) and PtCu(111), formaldehyde (CD 2 O) is the predominant partial oxidation product over a broad range of oxygen coverages. The selectivity toward formaldehyde peaks at intermediate oxygen coverages (∼0.3 monolayers, ML), indicating the existence of an optimal oxygen loading for partial oxidation. Notably, the similar product selectivities on Cu(111) and PtCu(111) over a range of surface oxygen coverage indicate that Pt single atoms do not significantly alter the reaction pathway or shift the optimal oxygen coverage for formaldehyde formation. Control experiments confirm that Cu(111) is unreactive toward methanol in the absence of oxygen, while PtCu(111) surfaces produce a small amount of formaldehyde even when oxygen is not preadsorbed, indicating that isolated Pt atoms facilitate O−H activation at below 150 K, leading to H 2 desorption, followed by C−D activation at higher temperatures (∼350 K). Density functional theory (DFT)-based calculations show that Pt atoms increase the O 2 dissociation barrier relative to Cu(111), consistent with the observed inhibition of oxidation at low exposures. Overall, this work provides the first detailed selectivity map for methanol oxidation on oxidized Cu(111) and PtCu(111) SAA surfaces. By linking classical mechanistic insights such as methoxy- and formate-mediated pathways with single-atom alloy catalyst design, this work demonstrates that while Pt substitution modulates the oxidation kinetics and oxygen binding, the overall selectivity toward formaldehyde is governed primarily by oxygen coverage. These findings underscore the potential of isolated dopants to tune surface oxidation behavior without compromising the intrinsic partial oxidation selectivity of copper-based catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Hydrogenation and C-S bond activation pathways in thiophene and tetrahydrothiophene reactions on sulfur-passivated surfaces of Ru, Pt, and Re nanoparticles

Thiophene-H2 reactions proceed via sulfur removal and hydrogenation routes on dispersed metal nanoparticles that become decorated by refractory S-adlayers during catalysis. The identity and kinetic relevance of the required elementary steps are described here based on rates measured at S-chemical potentials set by H2S/H2 ratios similar to those prevalent during practical catalysis on Re, ReSx, Ru, and Pt catalysts. Free energies for S adatom formation (from H2S decomposition and H2 evolution) are strongly exothermic (< -50 kJ mol-1 on Pt(111) and < -150 kJ mol-1 on Re and Ru(0001)), but strong repulsions between S adatoms cause adsorption free energies to increase significantly with coverage on all three surfaces, preventing complete monolayer formation. These adlayers, composed of unreactive S-atoms (S') that cover 1/3–2/3 ML leave residual interstitial spaces (*) that bind S-atoms (S*), intermediates, and transition states reversibly, as required for catalytic turnovers. The number and binding properties of these interstices depend on the identity and chemical state of the nanoparticle bulk phase, which influences S'-binding and coverages and cause large differences in direct desulfurization and hydrogenation turnover rates (per exposed metal atom) on dispersed Re, ReSx, Ru, and Pt. The identity and kinetic relevance of elementary steps for desulfurization (to C4¬ hydrocarbons) and hydrogenation (to tetrahydrothiophene; THT) are similar among these catalysts; they involve the kinetically-relevant formation of a thiophene-derived intermediate (monohydrothiophene on Re and ReSx; dihydrothiophene on Ru and Pt) that either cleaves its C-S bond or “over-hydrogenates” to THT in one surface sojourn. THT then undergoes C-S bond cleavage in secondary reactions that correct such over-hydrogenation to form the more unsaturated species that cleave C-S bonds. THT/C4 product ratios are insensitive to H2S/H2 ratios and thiophene pressure, even though active interstitial spaces are covered by kinetically-detectable coverages of S* and thiophene; therefore, primary and secondary reactions must involve the same active surfaces. The observed increase in THT/C4 ratios with H2 pressure shows that THT formation transition states involve a larger number of H-atoms than for C-S cleavage. The requirement for bound species with intermediate unsaturation (between THT and thiophene) for C-S bond cleavage is reminiscent of the H-shuttling required in C-C and C-O hydrogenolysis, reactions that involve the partial dehydrogenation of alkanes and alkanols, respectively, to weaken such bonds and to increase the formation entropy of the relevant transition states via the evolution of H2(g). These mechanistic details challenge prevalent paradigms about different site requirements for hydrogenation and desulfurization pathways and about how metal-sulfur bond energies act as descriptors of reactivity; in fact, such binding energies merely act to define the refractory S-adlayers that enable the formation of weakly-binding interstices that reversibly bind intermediates and transition states, thus allowing catalytic turnovers.

Yik, Edwin↗
DOE OSTI2024

Platinum/Tantalum Carbide Core–Shell Nanoparticles with Sub‐Monolayer Shells for Methanol and Oxygen Electrocatalysis

Abstract Core–shell architectures provide great opportunities to improve catalytic activity, but achieving nanoparticle stability under electrochemical cycling remains challenging. Herein, core–shell nanoparticles comprising atomically thin Pt shells over earth‐abundant TaC cores are synthesized and used as highly durable electrocatalysts for the methanol oxidation reaction (MOR) and the oxygen reduction reaction (ORR) needed to drive direct methanol fuel cells (DMFCs). Characterization data show that a thin oxidic passivation layer protects the TaC core from undergoing dissolution in the fuel cell‐relevant potential range, enabling the use of partially covered Pt/TaC core–shell nanoparticles for MOR and ORR with high stability and enhanced catalytic performance. Specifically, at the anode the surface‐oxidized TaC further enhances MOR activity compared to conventional Pt nanoparticles. At the cathode, the Pt/TaC catalyst feature increases tolerance to methanol crossover. These results show unique synergistic advantages of the core–shell particles and open opportunities to tailor catalytic properties for electrocatalytic reactions.

Chemistry↗
DOE OSTI2023

Atomic-scale modeling of the dissolution of oxidized platinum nanoparticles in an explicit water environment

Pt nanoparticles (NPs) are currently being investigated for use in fuel cells; however, Pt NP oxidation as a function of size, morphology, and temperature is not well understood or currently quantified. In this study, the stability and dissolution of oxidized platinum NPs is examined via classical molecular dynamics in an explicit water environment. The NPs considered range in size from 1.35 to 2.92 nm in diameter and included five different monolayer (ML) coverages of O*. The simulations were performed at 300, 450, and 600 K with the many-body, reactive third-generation charge-optimized many-body or COMB3 potentials and examine the kinetics of NP dissolution in water. The Pt–O layer, which reduces the kinetic activity for Pt atom dissolution, is projected to make dissolution more favorable for O* MLs smaller than 0.5. The simulations further indicate that the Pt NPs' kinetic rates of dissolution are slowed by an increase in the number of adsorbed species caused by the dissociation of water molecules at the reconstructed facets of the Pt NPs. Furthermore, these findings quantify the effect of oxygen and temperature on the stability and dissolution of oxidized platinum NP in an explicit water environment similar to the conditions in fuel cells and electrocatalysis.

08 HYDROGEN↗
DOE OSTI2022

Elucidating CO Oxidation Pathways on Rh Atoms and Clusters on the “29” Cu 2 O/Cu(111) Surface

We report single-atom catalysts have attracted a great deal of attention due to their distinct reactivity and potential for cost savings. However, despite the wealth of literature in recent years, identifying the exact nature of the active sites and associated reaction mechanisms remains challenging in many cases. Herein, we take a surface science approach to understand how Rh single atoms and small clusters behave on the thin film “29” Cu 2 O grown on Cu(111). We find that in contrast to Pt, which is present solely as single atoms on the “29” Cu 2 O surface, Rh atoms and clusters coexist and each enable low-temperature CO oxidation, but via different pathways. Specifically, the single Rh atoms produce CO 2 at 444 K via a Mars van Krevelen mechanism whereas the Rh clusters can also dissociate CO, as demonstrated via isotope labeling, and liberate CO 2 at 313 K. Density functional theory (DFT) calculations quantify the energetics of these different pathways and demonstrate that only extended Rh is capable of CO dissociation. Low-temperature scanning tunneling microscopy (STM) reveals that unlike Pt atoms on the same surface, which stay atomically dispersed, the distribution of Rh structures is dependent on pretreatment conditions. DFT calculations reveal the greater tendency of Rh atoms to cluster than Pt, and STM image simulations confirm the active sites. Ambient pressure X-ray photoelectron spectroscopy studies on the same single crystal model systems demonstrate that 1% of a monolayer of Rh on the “29” Cu 2 O thin film significantly accelerates its reduction by CO at 400 K, thus confirming the ultrahigh vacuum surface science findings. Together, these results illustrate how well-defined single crystal experiments are useful in building structure–function relationships that elucidate the reactivity of different ensemble sizes with a level of detail beyond what is possible with high surface area catalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A Library of Atomically Thin 2D Materials Featuring the Conductive-Point Resistive Switching Phenomenon

Non-volatile resistive switching (NVRS) is a widely available effect in transitional metal oxides, colloquially known as memristors, and of broad interest for memory technology and neuromorphic computing. Until recently, NVRS was not known in other transitional metal dichalcogenides (TMDs), an important material class owing to their atomic thinness enabling the ultimate dimensional scaling. Here, various monolayer or few-layer 2D materials are presented in the conventional vertical structure that exhibit NVRS, including TMDs (MX 2 , M = transitional metal, e.g., Mo, W, Re, Sn, or Pt; X = chalcogen, e.g., S, Se, or Te), TMD heterostructure (WS2/MoS2), and an atomically thin insulator (h-BN). These results indicate the universality of the phenomenon in 2D non-conductive materials, and feature low switching voltage, large ON/OFF ratio, and forming-free characteristic. A dissociation–diffusion–adsorption model is proposed, attributing the enhanced conductance to metal atoms/ions adsorption into intrinsic vacancies, a conductive-point mechanism supported by first-principle calculations and scanning tunneling microscopy characterizations. Our results motivate further research in the understanding and applications of defects in 2D materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A combined TEM and SAXS study of the growth and self-assembly of ultrathin Pt nanowires

Ultrathin Pt nanowires possess high activity for various electrocatalytic applications. However, little work has focused on understanding their growth mechanisms. Herein, we utilize a combination of time-dependent, ex situ transmission electron microscopy (TEM) and small angle x-ray scattering (SAXS) techniques to observe the growth process in addition to associated surfactant-based interactions. TEM images indicate that initially nanoparticles are formed within 30 s; these small 'seed' particles quickly elongate to form ultrathin nanowires after 2 min. These motifs remain relatively unchanged in size and shape up to 480 min of reaction. Complementary SAXS data suggests that the initial nanoparticles, which are coated by a surfactant bilayer, arrange into a bcc superlattice. With increasing reaction time, the bcc lattice disappears as the nanoparticles grow into nanowires, which then self-assemble into a columnar hexagonal structure in which the individual nanowires are covered by a CTAB monolayer. The hexagonal structure eventually degrades, thereby leading to the formation of lamellar stacking phases comprised of surfactant bilayers. To the best of our knowledge, this is the first time that SAXS has been used to monitor the growth and self-assembly of Pt nanowires. In conclusion, these insights can be used to better understand and rationally control the formation of anisotropic motifs of other metallic nanostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Machine learning prediction and experimental verification of Pt-modified nitride catalysts for ethanol reforming with reduced precious metal loading

Ethanol is the smallest molecule containing C–O, C–C, C–H, and O–H bonds present in biomass-derived oxygenates. The development of inexpensive and selective catalysts for ethanol reforming is important towards the renewable generation of hydrogen from biomass. Transition metal nitrides (TMN) are interesting catalyst support materials that can effectively reduce precious metal loading for the catalysis of ethanol and other oxygenates. Herein theoretical and experimental methods were used to probe platinum-modified molybdenum nitride (Pt/Mo 2 N) surfaces for ethanol reforming. Computations using density-functional theory and machine learning predicted monolayer Pt/Mo 2 N to be highly active and selective for ethanol reforming. Temperature-programmed desorption (TPD) experiments verified that ethanol primarily underwent decomposition on Mo 2 N, and the reaction pathway shifted to reforming on Pt/Mo 2 N surfaces. Additionally, high-resolution electron energy loss spectroscopy (HREELS) results further indicated that while Mo2N decomposed the ethoxy intermediate by cleaving C–C, C–O, and C–H bonds, Pt-modification preserved the C–O bond, resulting in ethanol reforming.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Interfacial Charge Transfer and Substrate-Dependent Oxidation States Drive SMSI Enhancements in Cobalt Oxide Films

Here, we investigated the mechanisms underlying strong metal-support interactions in CO oxidation using model systems where noble metal crystals support reducible, monolayer-thick CoO x films. The effect of the Co oxidation state, film thickness, and substrate identity were studied in varying reaction conditions using ambient pressure X-ray photoelectron spectroscopy. At low O 2 pressures, the same oxide phase forms on both Pt(111) and Au(111) surfaces. But when heated at higher O 2 pressures, the oxide phase depends on the substrate. We found that CoO x /Pt is more active for the CO oxidation reaction than CoO x /Au, even when both surfaces stabilize the same oxide phase. DFT calculations on these and related noble-metal-supported CoO x films reveal an SMSI-induced reactivity enhancement that strongly depends on the oxide film thickness and which is mediated by charge transfer between the metal and oxide. Charge transfer is also found to correlate with the reaction energy and activation barrier for CO oxidation. This effect was found to be greatest for oxide films on Pt, decreasing on other noble metal supports in the order Pt > Pd > Au > Ag, in agreement with the experiments. The role of charge transfer in the activation barriers and reaction energies provides insight into the nature of SMSI-induced catalytic activity, and suggests that the noble metal work function can serve as an indicator for the strength of SMSI effects.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Application-driven synthesis and characterization of hexagonal boron nitride deposited on metals and carbon nanotubes

Hexagonal boron nitride (h-BN) is unique among two-dimensional materials, with a large band gap (~6 eV) and high in-plane thermal conductivity (>400 W m -1 K -1 ), second only to diamond among electrical insulators. Many studies to date have relied on exfoliated h-BN, however, for large-scale applications the material must be synthesized by methods such as chemical vapor deposition (CVD). Here, we first investigate single-layer h-BN synthesized by CVD on single crystal platinum (Pt), comparing these films with h-BN deposited on more commonly used polycrystalline Pt and Cu. The h-BN film grown on single crystal Pt has the lowest surface roughness and best spatial homogeneity, and our electrochemical transfer process allows the Pt to be reused with no measurable degradation. Additionally, we also demonstrate direct capping of carbon nanotubes (CNTs) with as-grown h-BN, but we find that the direct growth partly degrades the CNT electrical conductivity. On the other hand, we show that transferred monolayer h-BN can serve as an ultrathin barrier which protects MoS2 from damage at high temperatures and discuss other applications that take advantage of the conformal h-BN deposition.

2D materials↗
DOE OSTI2020

Atomic-Scale Structural Mapping of Active Sites in Monolayer PGM-Free Catalysts by Low-Voltage 4D-STEM

Two-dimensional (2D) materials have attracted a large amount of attention in both basic and applied fields, and scanning transmission electron microscopy (STEM) is often uniquely well-suited for characterizing the atomic-scale structure of these materials [1-4]. As a result, STEM is poised to significantly impact progress on platinum group metal (PGM)-free catalysts, which are currently under intense development to enable low-cost, commercially viable hydrogen fuel cells [5]. While recent advancements have resulted in fuel cell performance comparable to Pt catalysts by some measures [6], cell durability remains a significant challenge, limiting practical applications [7]. Catalytically active sites in PGM-free materials are proposed to be FeN4 complexes embedded in a graphene lattice (Fig. 1b) within layered or other larger materials, but this is still under debate largely due to the range of potential actives sites predicted by computational methods and lack of methods for directly validating these models [5]. Fundamental insights into the atomic structure and resulting degradation pathways of proposed active sites are therefore needed to fully understand and control cell performance and durability [6].2D materials typically make ideal samples for STEM, but those within PGM-free catalysts present additional challenges since these materials are often defect-rich, with a high density of edges, dopant atoms, etc., which significantly increase susceptibility to beam damage at standard operating voltages. This makes analysis of potential FeN4 active sites particularly challenging, since a large proportion of Fe exists at edge sites where beam-induced atomic displacements can prohibit high-resolution structural characterization [6]. Conventional dark-field imaging compounds this problem by producing less signal for a given dose and being less sensitive to light elements than dose-efficient phase contrast imaging techniques such as those enabled by four-dimensional (4D)-STEM [8-10] (Fig. 1a). Consequently, active site structural analysis is often left to methods such as low-resolution imaging combined with quantum chemical calculations [6], which hinders accurate determination of reaction and degradation mechanisms.Here, we demonstrate direct atomic-scale structural mapping of FeN4 sites by performing low-voltage 4D-STEM on a model PGM-free catalyst system with many exposed monolayer regions. To accomplish this, we pair a 30 keV aberration-corrected probe with a fast pixelated detector that has optimal performance at low beam voltages [11]. This enables us to simultaneously image light and heavy elements with high signal-to-noise by center-of-mass analysis (Fig. 1c) while minimizing beam-induced atomic displacements at sensitive sites. The monolayer nature of these materials additionally allows for experimental validation by direct comparison with multislice simulations [12] of model structures (Fig. 1d-e). This work demonstrates how low-voltage 4D-STEM will provide new insights into the atomic-scale structure and degradation mechanisms of active sites in PGM-free catalysts, facilitating the development of low-cost hydrogen fuel cells and other energy conversion technologies in the future [13].

Zachman, Michael↗
DOE OSTI2025

Metal–Oxide Interface Sites Created Using Atomic Layer Deposition and Tested for CO Oxidation

The performance of catalysts made out of Pt supported on TiO 2 thin films grown on SBA-15 (a silica mesoporous material) by atomic layer deposition (ALD) was characterized systematically by combining in situ infrared absorption spectroscopy (IR) with other techniques including electron microscopy and adsorption−desorption isothermal measurements. The titania films in the resulting high-surface-area catalysts were evenly distributed throughout the inner surface of the SBA-15 mesopores, and their thickness could be controlled at a submonolayer level, with 3 to 4 TiO 2 ALD cycles needed for the complete coverage of the silica sites. The titania films could be deposited either before or after adding the metal (Pt), which was dispersed in the form of small nanoparticles (NPs) approximately 4−6 nm in diameter, in order to exert some control on the density and nature of the Pt/TiO 2 interface sites. One important lesson deriving from this work is that such an order of deposition leads to significantly different catalysts in spite of the fact that most of their structural properties are similar. If the Pt is deposited on the titania films, the resulting metal NPs are slightly smaller than those grown on silica and display CO adsorption sites with lower surface Pt coordination numbers. On the other hand, when TiO 2 is deposited on the Pt/SBA-15 starting material, some titania grows on the metal and partially blocks its surface while also creating new interface sites where CO binds more weakly and displays lower C−O stretching frequencies. In terms of catalytic performance, the results from in situ IR CO site titration and kinetic measurements combined suggest a mechanism where CO first adsorbs on Pt atop sites and then migrates to Pt/TiO 2 interface sites, where oxidation takes place. Both types of sites appear to be similar in all the catalysts tested, but catalytic performance could be optimized by tuning their surface densities. Maximum catalytic activity was obtained when the TiO2 films were deposited first and with TiO 2 coverages of at least half a monolayer, that is, after at least 2 ALD cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗