Search NASA⌕ Search

SEARCH · Search NASA

Results for “RADIO SIGNAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Ionospheric irregularities causing scintillation of GHz frequency radio signals

Consideration of the recently observed phenomenon of scintillation of satellite signals at GHz frequency range. Based on the scintillation data and results from in situ measurements, several ionospheric irregularity models with different power spectra are studied. Scintillation index is computed for the various models and compared with observed results. Both magnitude and frequency dependence of the scintillation index are investigated. It is found that a thick irregularity slab of the order of 200 km with an electron density fluctuation of about 20 per cent of its background value and with a nonmonotonic power spectrum may account for the maximum observed values of the scintillation index as well as its frequency dependence. Some future observations and measurements are suggested.

Wernik, A. W.↗

Effects of multiple scattering on scintillation of transionospheric radio signals

Recent development in the optical scintillation theory has been adapted to the ionospheric geometry in order to study the ionospheric scintillation phenomenon in the presence of multiple scattering. Under approximations well satisfied in typical ionospheres for a frequency above about 20 MHz, the first through fourth moment equations have been derived and some analytic solutions given. The fourth moment equation has also been solved numerically. The numerical results show clearly the occurrence of focusing and saturation phenomena. The new multiple-scatter effects are emphasized.

Liu, C. H.↗

Spectral inversion of radio signals scattered from Saturn's rings

Favorable alignment of contours of constant Doppler frequency with the ringlets that comprise Saturn's ring system formed the basis of an inversion technique that recovered the radar cross-section with radial resolution reaching 1000 km from an experiment carried out by the Voyager 1 spacecraft. The radar cross-section, together with measurements of the direct signal extinction, lead to estimates of effective particle diameters of 2, 8, and 10 meters for ringlets within ring C, Cassini division, and ring A, respectively.

Marouf, E. A.↗

Gravitational waves and red shifts - A space experiment for testing relativistic gravity using multiple time-correlated radio signals

A two-step satellite mission for improving the accuracy of gravitational wave detection and for observing actual gravity waveforms is proposed. The spacecraft would carry both a highly stable hydrogen maser, which would control a transmitter sending signals to earth, and a Doppler transponder operating in the two-way mode. The use of simultaneous one- and two-way Doppler transmissions offers four time records of frequency pulsations, which can reveal gravitational radiation at 1-10 MHz with an amplitude accuracy of a factor of six. The first mission phase would consist of a Shuttle launch into a highly eccentric orbit to obtain measurements of the gravitational redshift using gravitational potentials of different earth regions to establish that gravity is describable by a metric theory. Then, after a boost into a heliocentric orbit at 6 AU, the earth-satellite system could detect gravitational waves in the solar system, as well as bursts emitted by the collisions of supermassive black holes.

Smarr, L. L.↗

An investigation of pre-launch and in-flight STS range safety radio signal degradation and dropout

The range safety system (RSS) transmitters operate at a frequency of 416.500 MHz. The transmitting antennas transmit left circularly polarized waves, and the shuttle range safety system (SRSS) receiving antennas onboard the shuttle vehicle receive left circular polarization. Preliminary explanations are proposed for many of the observed fluctuations in signal levels. It is recommended that experiments and further investigation be performed to test the validity of certain of these explanations.

Mcdonald, Malcolm W.↗

Topological and Dynamical Representations for Radio Frequency Signal Classification

Radio Frequency (RF) signals are found throughout our world, carrying over-the-air information for both digital and analog uses with applications ranging from WiFi to the radio. One area of focus in RF signal analysis is determining the modulation schemes employed in these signals which is crucial in many RF signal processing domains from secure communication to spectrum monitoring. This work investigates the accuracy and noise robustness of novel Topological Data Analysis (TDA) and dynamic representation based approaches paired with a small convolution neural network for RF signal modulation classification with a comparison to state-of-the-art deep neural network approaches. We show that using TDA tools, like Vietoris-Rips and lower star filtrations, and the Takens' embedding in conjunction with a standard shallow neural network we can capture the intrinsic dynamical, geometric, and topological features of the underlying signal's manifold, offering informative representations of the RF signals. Our approach is effective in handling the modulation classification task and is notably noise robust, outperforming the commonly used deep neural network approaches in mode classification. Moreover, our fusion of dynamical and topological information is able to attain similar performance to deep neural network architectures with significantly smaller training datasets.

Myers, Audun D.↗

Sampling Downconverter For Radio-Frequency Signals

Phase and delay errors reduced greatly. Proposed GaAs integrated-circuit for receiver of radio signals at gigahertz frequencies samples incoming signal in phase and in quadrature, digitizes it, and down-converts it to baseband in single step. Incorporates both digital and analog components in design offering improved stability, versatility, and sampling bandwidth. Eliminates need for several components found in conventional analog designs, including mixers, postmixer filters, and 90 degree phase shifter.

Thomas, J. B.↗

Communicating from the edge of the solar system

Communication technology for deep-space scientific missions is surveyed, with a focus on systems being developed for Galileo, a NASA orbiter/probe mission to Jupiter. The problems faced in designing the links from the probe (descending into the Jovian atmosphere) to the orbiter and from the orbiter to earth are examined; the technological solutions adopted for Galileo are discussed; the expansion of the Deep Space Network for the mission is described; the advantages and limitations of cm-band communication systems being considered to meet the data-rate requirements of future deep-space missions are outlined; and the potential of optical communication for the 21st century is indicated. Also included are tables listing past and planned deep-space missions and a brief description of the use of spacecraft radio signals by radio and planetary scientists to probe solar-system plasmas and gravitational fields.

Posner, E. C.↗

Goldstone radio spectrum signal identification, March 1980 - March 1982

The signal identification process is described. The Goldstone radio spectrum environment contains signals that are a potential source of electromagnetic interference to the Goldstone tracking receivers. The identification of these signals is accomplished by the use of signal parameters and environment parameters. Statistical data on the Goldstone radio spectrum environment from 2285 to 2305 MHz are provided.

Gaudian, B. A.↗

Fast Faraday fading of long range satellite signals.

20 MHz radio signals have been received during the day from satellite Beacon-B when it was below the optical horizon by using a bank of narrow filters to improve the signal to noise ratio. The Faraday fading rate becomes constant, under these conditions, at a level determined by the plasma frequency just below the F-layer peak. Variations in the Faraday fading rate reveal fluctuations in the electron density near the peak, while the rate of attaining the constant level depends on the shape of the electron density profile.

Heron, M. L.↗

Low-Power SOI CMOS Transceiver

The work aims at developing a low-power Silicon on Insulator Complementary Metal Oxide Semiconductor (SOI CMOS) Transceiver for deep-space communications. RF Receiver must accomplish the following tasks: (a) Select the desired radio channel and reject other radio signals, (b) Amplify the desired radio signal and translate them back to baseband, and (c) Detect and decode the information with Low BER. In order to minimize cost and achieve high level of integration, receiver architecture should use least number of external filters and passive components. It should also consume least amount of power to minimize battery cost, size, and weight. One of the most stringent requirements for deep-space communication is the low-power operation. Our study identified that two candidate architectures listed in the following meet these requirements: (1) Low-IF receiver, (2) Sub-sampling receiver. The low-IF receiver uses minimum number of external components. Compared to Zero-IF (Direct conversion) architecture, it has less severe offset and flicker noise problems. The Sub-sampling receiver amplifies the RF signal and samples it using track-and-hold Subsampling mixer. These architectures provide low-power solution for the short- range communications missions on Mars. Accomplishments to date include: (1) System-level design and simulation of a Double-Differential PSK receiver, (2) Implementation of Honeywell SOI CMOS process design kit (PDK) in Cadence design tools, (3) Design of test circuits to investigate relationships between layout techniques, geometry, and low-frequency noise in SOI CMOS, (4) Model development and verification of on-chip spiral inductors in SOI CMOS process, (5) Design/implementation of low-power low-noise amplifier (LNA) and mixer for low-IF receiver, and (6) Design/implementation of high-gain LNA for sub-sampling receiver. Our initial results show that substantial improvement in power consumption is achieved using SOI CMOS as compared to standard CMOS process. Potential advantages of SOI CMOS for deep-space communication electronics include: (1) Radiation hardness, (2) Low-power operation, and (3) System-on-Chip (SOC) solutions.

Fujikawa, Gene↗

Voyager 2 radio observations of Uranus

Voyager 2 detected continuous radio signals in the 40-100 kHz interval starting from 5 days before passage of Uranus. The radio signals reached 800 kHz within 4 days of closest approach and continued throughout the outward bound phase of flight. The signals were modulated with a period close to 17.24 days, the same period calculated for the rotation of the Uranus magnetosphere with other spacecraft data. The planet was also found to have an off-center magnetic field, and radio signals were strongest when the dipole center was on the nightside of Uranus. Dynamic spectral and burst events which were recorded indicated that Uranus, like the earth, has a strongly defined plasmasphere. It moves under the control of magnetic force tubes that interact with the magnetosphere boundary, producing a variety of MHD phenomena.

Warwick, J. W.↗