Search NASA⌕ Search

SEARCH · Search NASA

Results for “ROTATING CYLINDER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

In-flight investigation of a rotating cylinder-based structural excitation system for flutter testing

A research excitation system was test flown at the NASA Dryden Flight Research Facility on the two-seat F-16XL aircraft. The excitation system is a wingtip-mounted vane with a rotating slotted cylinder at the trailing edge. As the cylinder rotates during flight, the flow is alternately deflected upward and downward through the slot, resulting in a periodic lift force at twice the cylinder's rotational frequency. Flight testing was conducted to determine the excitation system's effectiveness in the subsonic and transonic flight regimes. Primary research objectives were to determine the system's ability to develop adequate force levels to excite the aircraft's structure and to determine the frequency range over which the system could excite structural modes of the aircraft. The results from the exciter were compared with results from atmospheric turbulence excitation at the same flight conditions. The results from the forced excitation were of higher quality and had less variation than the results from atmospheric turbulence. The forced excitation data also invariably yielded higher structural damping values than those from the atmospheric turbulence data.

Vernon, Lura↗
NASA NTRS1993

The three-dimensional flow past a rapidly rotating circular cylinder

The high Reynolds number (Re) flow past a rapidly rotating circular cylinder is investigated. The rotation rate of the cylinder is allowed to vary (slightly) along the axis of the cylinder, thereby provoking three-dimensional flow disturbances, which are shown to involve relatively massive (O(Re)) velocity perturbations to the flow away from the cylinder surface. Additionally, three integral conditions, analogous to the single condition determined in two dimensions by Batchelor, are derived, based on the condition of periodicity in the azimuthal direction.

Denier, James P.↗
NASA NTRS1986

Thermocapillary and centrifugal-buoyancy-driven motion in a rapidly rotating liquid cylinder

The thermocapillary flow field in a uniformly rotating liquid cylinder heated from above is calculated using linear boundary-layer theory appropriate for small values of the Ekman number. The results show that the thermocapillary flow is confined to a thin layer at the liquid-gas interface if the temperature difference across the cylinder is sufficiently small. The interior flow is a uniform rotation with the endplates. The flow due to centrifugal buoyancy is also analyzed using the same theory. The magnitude of this flow compared with the thermocapillary motion is small in typical circumstances. However, it does influence the temperature field in the interior of the cylinder, where the thermocapillary motion does not. Full details of these flows and the first-order corrections to the interface shape are presented.

Smith, M. K.↗
NASA NTRS1925

Recent Experiments at the Gottingen Aerodynamic Institute

This report presents the results of various experiments carried out at the Gottingen Aerodynamic Institute. These include: experiments with Joukowski wing profiles; experiments on an airplane model with a built-in motor and functioning propeller; and the rotating cylinder (Magnus Effect).

CYLINDERS, ROTATING↗
NASA NTRS2004

Numerical Study of Flow Past a Circular Cylinder Using RANS, Hybrid RANS/LES and PANS Formulations

Two multiscale type turbulence models are implemented in the PAB3D solver. The models are based on modifying the Reynolds Averaged Navier-Stokes (RANS) equations. The first scheme is a hybrid RANS/LES model utilizing the two-equation (k(sub epsilon)) model with a RANS/LES transition function dependent on grid spacing and the computed turbulence length scale. The second scheme is a modified version of the partially averaged Navier-Stokes (PANS) model, where the unresolved kinetic energy parameter (f(sub k)) is allowed to vary as a function of grid spacing and the turbulence length scale. Solutions from these models are compared to RANS results and experimental data for a stationary and rotating cylinder. The parameter f(sub k) varies between zero and one and has the characteristic to be equal to one in the viscous sub layer, and when the RANS turbulent viscosity becomes smaller than the LES viscosity. The formulation, usage methodology, and validation example are presented to demonstrate the enhancement of PAB3D's time-accurate and turbulence modeling capabilities. The models are compared to RANS results and experimental data for turbulent separated flows (TS) and laminar separated flows (LS) around stationary and rotating cylinders. For a stationary cylinder, the TS case is accurately simulated using the general two-equation k(sub epsilon) turbulence model (eddy-viscosity model). PAB3D accurately predicts the drag coefficient (CD), lift coefficient (CL) and the Strouhal number (St). The LS case was a challenge for the RANS computation with an eddy-viscosity turbulence model. The RANS/LES and PANS performed well and showed marked improvements over the RANS solution. The modified PANS model was the most accurate. For the rotating cylinder, the spin ratio varied from zero to one, and the PANS results were in good agreement with published experimental data. RANS/LES and PANS capture both temporal and spatial fluctuations and produce large-scale structures that do not occur in the RANS simulation. The current results show promise for the capability of PANS in simulating unsteady and complex flow phenomena.

Elmiligui, Alaa A.↗
NASA NTRS1986

Computation of turbulent flows on rotating bodies and ducts

A K-epsilon model for three-dimensional boundary layers modified to include anisotropy and one modified for rotating flows are described. Based on these models, the predictions of a space-marching code show good agreement with the flow data for a rotating cylinder and a rotating channel.

Pougare, M.↗
NASA NTRS2013

Systems and Methods for the Electrodeposition of a Nickel-cobalt Alloy

Systems and methods for electrodepositing a nickel-cobalt alloy using a rotating cylinder electrode assembly with a plating surface and an electrical contact. The assembly is placed within a plating bath and rotated while running a plating cycle. Nickel-cobalt alloy deposition is selectively controlled by controlling current density distribution and/or cobalt content in the plating bath while running the plating cycle to deposit an alloy of a desired yield strength onto the plating surface in a single plating cycle. In various embodiments, the rotating cylinder may be used as an insitu monitoring method to assist in obtaining the properties desired.

Ogozalek, Nance Jo↗
NASA NTRS1989

Dynamical behavior of surface tension on rotating fluids in low and microgravity environments

Consideration is given to the time-dependent evolutions of the free surface profile (bubble shapes) of a cylindrical container, partially filled with a Newtonian fluid of constant density, rotating about its axis of symmetry in low and microgravity environments. The dynamics of the bubble shapes are calculated for four cases: linear time-dependent functions of spin-up and spin-down in low and microgravity, linear time-dependent functions of increasing and decreasing gravity at high and low rotating cylinder speeds, time-dependent step functions of spin-up and spin-down in low gravity, and sinusoidal function oscillation of the gravity environment in high and low rotating cylinder speeds. It is shown that the computer algorithms developed by Hung et al. (1988) may be used to simulate the profile of time-dependent bubble shapes under variations of centrifugal, capillary, and gravity forces.

Hung, R. J.↗
NASA NTRS1990

Dynamics of surface tension in microgravity environment

Time-dependent evolutions of the profile of free surface (bubble shapes) for a cylindrical container partially filled with a Newtonian fluid of constant density, rotating about its axis of symmetry, in low and microgravity environments, have been studied. Numerical computations of the dynamics of bubble shapes have been carried out (1) linear time-dependent functions of spin-up and spin-down in low and microgravity environments, (2) linear time-dependent functions of increasing and decreasing gravity environment at high and low rotating cylinder speeds, (3) time-dependent step functions of spin-up and spin-down in a low-gravity environment, and (4) sinusoidal function oscillation of the gravity environment at high and low rotating cylinder speeds.

Hung, R. J.↗
NASA NTRS1984

Computation and turbulence closure models for shear flows in rotating curved bodies

This paper is concerned with the effects of rotation and curvature on the turbulence closure model. The k-epsilon model that includes the effects of curvature has been modified to include the anisotropy in turbulence. A space-marching algorithm which solves the parabolized Navier-Stokes equations is coupled with the turbulence closure model to predict the turbulent shear flow over a rotating cylinder and inside a rotating channel. The agreement between the predictions and available data is good. The rotation and curvature effects are predicted well.

Pouagare, M.↗
NASA NTRS1987

Strange attractors in weakly turbulent Couette-Taylor flow

An experiment is conducted on the transition from quasi-periodic to weakly turbulent flow of a fluid contained between concentric cylinders with the inner cylinder rotating and the outer cylinder at rest. Power spectra, phase-space portraits, and circle maps obtained from velocity time-series data indicate that the nonperiodic behavior observed is deterministic, that is, it is described by strange attractors. Various problems that arise in computing the dimension of strange attractors constructed from experimental data are discussed and it is shown that these problems impose severe requirements on the quantity and accuracy of data necessary for determining dimensions greater than about 5. In the present experiment the attractor dimension increases from 2 at the onset of turbulence to about 4 at a Reynolds number 50-percent above the onset of turbulence.

Brandstater, A.↗
NASA NTRS1992

The Proteus Navier-Stokes code

An effort is currently underway at NASA Lewis to develop two and three dimensional Navier-Stokes codes, called Proteus, for aerospace propulsion applications. Proteus solves the Reynolds-averaged, unsteady, compressible Navier-Stokes equations in strong conservation law form. Turbulence is modeled using a Baldwin-Lomax based algebraic eddy viscosity model. In addition, options are available to solve thin layer or Euler equations, and to eliminate the energy equation by assuming constant stagnation enthalpy. An extensive series of validation cases have been run, primarily using the two dimensional planar/axisymmetric version of the code. Several flows were computed that have exact solution such as: fully developed channel and pipe flow; Couette flow with and without pressure gradients; unsteady Couette flow formation; flow near a suddenly accelerated flat plate; flow between concentric rotating cylinders; and flow near a rotating disk. The two dimensional version of the Proteus code has been released, and the three dimensional code is scheduled for release in late 1991.

Towne, Charles E.↗
NASA NTRSDate not supplied

Centrifugal Nuclear Thermal Rocket Challenges and Potential

The Centrifugal Nuclear Thermal Rocket (CNTR) is a liquid fueled fission propulsion concept designed to heat propellant to 5000 K prior to expansion through a nozzle. A specific impulse up to 1800 s may be achieved using hydrogen propellant, and a specific impulse up to 1000 s may be achieved using more storable propellants such as methane, ammonia, or propane. The high uranium density of the liquid metallic uranium or liquid uranium carbide fuel will help enable compact engines suitable for missions such as fast (<15 month) round trip human Mars missions or high delta-V missions in cislunar space. Long term applications of the CNTR could include the advanced exploration and utilization of the solar system through direct use of in-situ volatiles as propellant. Challenges associated with the CNTR are numerous. Centrifugal force is used to retain the liquid fuel in rotating fuel cylinders, and rotational velocities up to 5000 rpm may be required. Propellant flow must be directed such that all structures and moderators in the core are adequately cooled prior to the propellant entering the liquid fuel and being heated to 5000 K. The rotating fuel cylinder wall (RFCW) must have an inner surface designed to be compatible with liquid uranium metal or uranium carbide fuel up to at least 1500 K, and that inner surface may also need to be textured to help maintain acceptable wall temperatures. Propellant must flow radially inward through the RFCW while fuel is simultaneously contained. The RFCW should ideal-ly be made from a material with low neutron absorption to help minimize engine mass and facilitate the use of High Assay Low Enriched Uranium (HALEU) fuel in the system. The drive system for the rotating fuel cylinders must support all phases of operation. This paper will discuss computational and experimental research being conducted to address some of the challenges associated with the CNTR, and will also note potential mission benefits from the CNTR.

Michael G. Houts↗
NASA NTRS1976

Mechanical thermal motor

An apparatus is described for converting thermal energy such as solar energy into mechanical motion for driving fluid pumps and similar equipment. The thermal motor comprises an inner concentric cylinder carried by a stationary core member. The core member has a cylindrical disc plate fixed adjacent to a lower portion and extending radially from it. An outer concentric cylinder rotatably carried on the disc plate defining a space between the inner and outer concentric cylinders. A spiral tubular member encircles the inner concentric cylinder and is contained within the space between the inner and outer cylinders. One portion is connected to the inner concentric cylinder and a second portion connected to the outer concentric cylinder. A heated fluid is conveyed through the tubular member and is periodically cooled causing the tubular member to expand and contract. This causes the outer concentric cylinder to reciprocally rotate on the base plate accordingly. The reciprocating motion of the outer concentric cylinder is then utilized to drive a pump member in a pump chamber.

Hein, L. A.↗