SEARCH · Search NASA

Results for “Radio Waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Infrared-Transparent Semiconductor Membranes for Electromagnetic Interference Shielding of Millimeter Waves

Here, it is demonstrated that single-crystalline and highly doped GaAs membranes are excellent candidates for realizing infrared-transparent shields of electromagnetic interference at millimeter frequencies. Measured optical transmittance spectra for the semiconductor membranes show resonant features between 750 and 2500 nm, with a 100% maximum transmittance. The shielding effectiveness of the membranes is extracted from measured scattering parameters between 65 and 85 GHz. Selected GaAs membranes and membranes/polyamide films exhibit shielding effectiveness ranging from 22 to 40 dB, which are suitable values to ensure the safe operation of infrared devices for commercial applications. Theoretical calculations based on a plane wave model show that the interplay of primary reflection and multiple internal reflections of the radio-frequency waves results in broadband shielding capabilities of the membrane between 10 and 300 GHz.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2023

Superconducting radio frequency linear collider HELEN

This article discusses a proposed Higgs-Energy LEptoN (HELEN) $e^+e^-$ linear collider based on advanced traveling wave superconducting radio frequency technology. Here, the proposed collider offers cost and AC power savings, smaller footprint (relative to the ILC), and could be built at Fermilab. After the initial physics run at 250 GeV, the collider could be upgraded either to higher luminosity or to higher, up to 500 GeV, energies.

43 PARTICLE ACCELERATORS↗

DOE OSTI2023

Design considerations for an ultrahigh-bandwidth Phase Contrast Imaging system applied to fusion grade devices

Abstract The PCI diagnostic is an internal reference interferometer that creates an image of absolutely calibrated electron density fluctuations integrated along the line of sight of the probing light beam. While conventional PCI diagnostics installed on fusion experiments worldwide employ light of wavelength equal to 10.59 μm, the same system using light at 1.55 μm wavelength would extend the spectral response in wave-number and frequency by factors of seven and over one hundred, respectively, thereby potentially providing quantitative measurements of the internal structure of density perturbations induced by either turbulent or radio-frequency waves, simultaneously covering ion to electron gyro-radius scales up to the GHz frequency region. Based on a previously developed 1.55 μm PCI prototype system, constraints to the design for such a diagnostic in fusion grade devices are presented and compared to those faced with the conventional method.

Instruments & Instrumentation↗

DOE OSTI2021

High Field Side Launch of RF Waves: A New Approach to Reactor Actuators

Launching radio frequency (RF) waves from the high field side (HFS) of a tokamak offers significant advantages over low field side (LFS) launch with respect to both wave physics and plasma material interactions (PMI). For lower hybrid (LH) waves, the higher magnetic field opens the window between wave accessibility and the condition for strong electron Landau damping, allowing LH waves from the HFS to penetrate into the core of a burning plasma, while waves launched from the LFS are restricted to the periphery of the plasma. The lower of waves absorbed at higher yields a higher current drive efficiency as well. In the ion cyclotron range of frequencies (ICRF), HFS launch allows for direct access to the mode conversion layer where mode converted waves absorb strongly on thermal electrons and ions, thus avoiding the generation of energetic minority ion tails. The absence of turbulent heat and particle fluxes on the HFS, particularly in double null configuration, makes it the ideal location to minimize PMI damage to the antenna structure. The quiescent SOL also eliminates the need to couple LH waves across a long distance to the separatrix, as the antenna can be located close to plasma without risking damage to the structure. Improved impurity screening on the HFS will help eliminate the long-standing issues of high Z impurity accumulation with ICRF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

The Parabolic Wave Equation Generalized to a Spatially Varying Plasma in a Vertical Magnetic Field

This report walks through the process of deriving the wave equation for a vertical wave being propagated through a spatially varying plasma in a vertical magnetic field. Additionally, this report shows how to derive the index of refraction of the plasma corresponding to three different modes of the vertical magnetic field. Finally, this paper briefly explores the next steps planned to successfully simulate and test the equations in a pre-existing phase screen scintillation code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Observation of a new type of self-generated current in magnetized plasmas

A tokamak, a torus-shaped nuclear fusion device, needs an electric current in the plasma to produce magnetic field in the poloidal direction for confining fusion plasmas. Plasma current is conventionally generated by electromagnetic induction. However, for a steady-state fusion reactor, minimizing the inductive current is essential to extend the tokamak operating duration. Several non-inductive current drive schemes have been developed for steady-state operations such as radio-frequency waves and neutral beams. However, commercial reactors require minimal use of these external sources to maximize the fusion gain, Q, the ratio of the fusion power to the external power. Apart from these external current drives, a self-generated current, so-called bootstrap current, was predicted theoretically and demonstrated experimentally. Here, we reveal another self-generated current that can exist in a tokamak and this has not yet been discussed by present theories. We report conclusive experimental evidence of this self-generated current observed in the KSTAR tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2026

Suprathermal electron transport studies in radio-frequency-heated tokamak plasmas

This contribution reports on the study of suprathermal electron radial transport enhancement in the presence of electron-heating radio-frequency waves, such as electron-cyclotron waves or lower-hybrid waves. Since suprathermal electrons emit hard X-rays from Bremsstrahlung, experimental data from hard X-ray measurements are used to follow their dynamics. In particular, electron-cyclotron power modulation experiments performed in TCV show that this transport depends on the total electron-cyclotron power. These results are corroborated by experimentally constrained Fokker-Planck simulations [J. Cazabonne et al, Plasma Phys. Control. Fusion 65, 104001 (2023)]. Similar experiments have been performed in WEST with lower-hybrid waves, and are reported for the first time. Preliminary analyses show potential evidence of suprathermal electron transport, but no clear dependence on wave power nor photon energy at this stage.

Cazabonne, Jean [CEA, IRFM, Saint Paul Lez Durance↗

DOE OSTI2022

Manufacturing the Harmonic Kicker Cavity Prototype for the Electron-Ion Collider

High-bunch-frequency beam-separation schemes, such as the injection scheme proposed for the Rapid Cycling Synchrotron at the Electron-Ion Collider, demand rise and fall times an order of magnitude below what can realistically be accomplished with a stripline kicker. Nanosecond-time-scale kick waveforms can instead be obtained by Fourier synthesis in a harmonically resonant quarter-wave radio-frequency cavity which is optimized for high shunt impedance. Originally developed for the Jefferson Lab Electron-Ion Collider (JLEIC) Circulator Cooler Ring, a hypothetical 11-pass ring driven by an energy-recovery linac at Jefferson Lab, our high-power prototype of such a harmonic kicker cavity, which operates at five modes at the same time, will demonstrate the viability of this concept with a beam test at Jefferson Lab. As the geometry of the cavity, tight mechanical tolerances, and number of ports complicate the design and manufacturing process, special care must be given to the order of the manufacturing steps. We present our experiences with the manufacturability of the present design, lessons learned, and first RF test results from the prototype.

Overstreet, S. A.↗

DOE OSTI2022

Manufacturing the Harmonic Kicker Cavity Prototype for the Electron-Ion Collider

Overstreet, S. A.↗

DOE OSTI2021

Underground Imaging by Sub-Terahertz Radiation

Sub-terahertz ground-penetrating radar systems offer an alternative to radio wave-based systems in the airborne imaging of buried objects. Laboratory prototype systems operating in W-band (75–110 GHz) and F-band (90–140 GHz) are presented, detecting the distance between target and source and imaging metal objects buried in mixed soil. The experimental results show that imaging in the 100–150 GHz frequency range is feasible for underground applications but significantly restricted by the attenuation characteristics of the medium covering the targets. A higher power source and more sensitive receiving components are essential to increase the penetration capability and expand the application settings of this approach.

42 ENGINEERING↗

DOE OSTI2021

Searching for gravitational waves with strongly lensed repeating fast radio bursts

We report that since their serendipitous discovery, fast radio bursts (FRBs) have garnered a great deal of attention from both observers and theorists. A new class of radio telescopes with wide fields of view have enabled a rapid accumulation of FRB observations, confirming that FRBs originate from cosmological distances. The high occurrence rate of FRBs and the development of new instruments to observe them create opportunities for FRBs to be utilized for a host of astrophysical and cosmological studies. We focus on the rare, and as yet undetected, subset of FRBs that undergo repeated bursts and are strongly gravitationally lensed by intervening structure. An extremely precise timing of burst arrival times is possible for strongly lensed repeating FRBs, and we show how this timing precision enables the search for long-wavelength gravitational waves, including those sourced by supermassive black hole binary systems. The timing of burst arrival for strongly lensed repeating FRBs is sensitive to gravitational-wave sources near the FRB host galaxy, which may lie at cosmological distances and would therefore be extremely challenging to detect by other means. Timing of strongly lensed FRBs can also be combined with pulsar timing array data to search for correlated time delays characteristic of gravitational waves passing through the Earth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2026

Cryogenic RF characterization of the MAGO cavity for high-frequency gravitational-wave detection

Superconducting radio-frequency (SRF) cavities are promising resonant sensors for gravitational-wave detection in the kHz-MHz frequency range. We report the cryogenic RF characterization of a prototype superconducting niobium cavity with an unconventional geometry designed for narrow electromagnetic mode separation. Following an adapted surface preparation procedure, cryogenic tests were performed at Fermilab and DESY at temperatures down to 2 K. Mechanical tuning at room temperature achieved a mode splitting of approximately 11 kHz at cryogenic temperature. High electromagnetic quality factors consistent with previous prototype cavities were measured. The measurements further revealed phase transfer characteristics relevant for stable low-level RF control as well as indications of mode coupling potentially caused by one-point multipacting. In addition, first cryogenic measurements of the mechanical eigenmodes yielded mechanical quality factors significantly below commonly assumed theoretical values. These results demonstrate the successful application of established SRF preparation and characterization techniques to a non-standard resonator geometry and provide important experimental input for the development of future SRF-based gravitational-wave detectors.

Dokuyucu, Can [DESY]↗

DOE OSTI2026

FullWave — A Full Wave Parallel Code for Modeling RF Fields in Hot Tokamak Plasma

FullWave is a computer code that simulates how radio-frequency (RF) waves travel and deposit energy in the hot plasma inside a fusion reactor. RF waves are used to heat the plasma and drive electrical current, which is essential for sustaining fusion reactions. The code uses a new algorithm that can handle much finer spatial detail than previous codes — more than 100 times finer — while running efficiently on national supercomputers. It incorporates a detailed physics model that captures subtle kinetic effects important for accurate prediction of wave behavior. Under this project, FullWave was extended to cover multiple RF frequency ranges relevant to present and future tokamaks, and validated against experimental parameters from the DIII-D tokamak at General Atomics. Results were published in peer-reviewed journal articles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Reimagining full wave rf quasilinear theory in a tokamak

The velocity dependent resonant interaction of particles with applied radio frequency (rf) waves during heating and current drive in the presence of pitch angle scattering collisions gives rise to narrow collisional velocity space boundary layers that dramatically enhance the role of collisions as recently shown by Catto (J. Plasma Phys., vol. 86, 815860302, 2020). The behavior is a generalization of the narrow collisional boundary layer that forms during Landau damping as found by Johnston (Phys. Fluids, vol. 14, 1971, pp. 2719-2726) and Auerbach (Phys. Fluids, vol. 20, 1977, pp. 1836-1844). For a wave of parallel wave number k|| interacting with weakly collisional plasma species of collision frequency ν and thermal speed vth , the effective collision frequency becomes of order ν(k_||v_th /ν)^2/3>> ν . The narrow boundary layers that arise because of the diffusive nature of the collisions allows a physically meaningful wave-particle interaction time to be defined that is the inverse of this effective collision frequency. The collisionality implied by the narrow boundary layer results in changes in the standard quasilinear treatment of applied rf fields in tokamaks while remaining consistent with causality. These changes occur because successive poloidal interactions with the rf are correlated in tokamak geometry and because the resonant velocity space dependent interactions are controlled by the spatial and temporal behavior of the perturbed full wave fields rather than just the spatially local Landau and Doppler shifted cyclotron wave-particle resonance condition associated with unperturbed motion of the particles. The correlation of successive poloidal circuits of the tokamak leads to the appearance in the quasilinear operator of transit averaged resonance conditions localized in velocity space boundary layers that maintain negative definite entropy production.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

RF cured nanocomposite adhesives for multi-material joining applications

A method for fabricating, and curing, nanocomposite adhesives including introducing nanoheater elements into a heat-curing adhesive to fabricate a nanocomposite adhesive, and providing a radio-frequency (RF) electromagnetic wave to the nanocomposite adhesive to heat, and cure the nanocomposite adhesive. The nanocomposite adhesive is physically applied to first and second materials to bond the first and second materials upon curing of the nanocomposite adhesive, and the RF electromagnetic wave has a frequency in the radio-frequency range, having energy that is transferred to the nanoheater elements by electromagnetic wave interactions with permanent and induced dipoles, intrinsic photon-phonon interaction, or interactions with nanoheater defects and grain structures.

Zhang, Yuepeng↗

DOE OSTI2026

Full-wave modeling of RF waves in fusion plasmas with finite element method: Progress in past decades and its future role

This paper reviews the progress in computing radio frequency (RF) wave fields in fusion plasmas, specifically focusing on simulations utilizing the finite element method (FEM) over the past few decades. Computing RF wave fields in fusion plasmas presents unique challenges due to large simulation domains, complex antenna structures, non-local dielectric properties, and wide ranges of spatial scales. It highlights key developments and outlines future directions, primarily addressing waves in the ion cyclotron (IC) to lower hybrid (LH) frequency range. We begin with briefly revisiting earlier developments before the widespread availability of modern computer-aided engineering (CAE) software based on FEM. This historical perspective illuminates early progress and the physics difficulties that motivated ongoing work within the community. Modern wave simulations for RF antennas based on FEM are characterized by the use of detailed 3D antenna model geometry generated from engineering CAD software and localized wave dielectric model. Significant advancements have also been made in improving physics models to include phenomena such as RF sheath rectification and wave scattering. FEM-based RF simulations have also been applied to compute wave propagation in the core region, where the inclusion of non-local dielectric response is crucial. This is a challenging goal, and several promising approaches have been proposed in this area. Additionally, RF simulation development initiatives based on open-source libraries have gained popularity, demonstrating scalability and flexibility in extending physics models. This paper will discuss the advantages and disadvantages of using such a publicly available FEM library.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Fast ion transport by sawtooth instability in the presence of ICRF-NBI synergy in JET plasmas

JET experiments have shown that the three-ion scenarios using waves in the ion cyclotron range of frequencies (ICRF) is an efficient way to build fast ion population through beam ion acceleration by radio frequency (RF) waves. Here, such a heating scheme is applied to plasmas with at least two thermal ion species. Analysis of mixed discharges with complex heating schemes requires a workflow that allows to model thermal and fast ion transport consistently. This paper is dedicated to modelling of a mixed plasma discharge with significant fraction of fast ions and contributes to development of fast ion transport models. For interpretive analysis with the TRANSP code a JET hydrogen-deuterium (HD) plasma discharge with neutral beam injection (NBI) and ICRF heating has been chosen. The task is complicated by NBI-ICRF synergy and plasma magnetohydrodynamic activity, like sawtooth crashes. D beam ions accelerated by RF waves form a high energy tail in fast ion distribution. Significant difference between the neutron rate computed by TRANSP and measured one is observed if the same diffusivity for electrons and ions is assumed. Sensitivity studies show that uncertainties in input plasma parameters and thermal ion transport models are crucial for modelling mixed plasma discharges and increased D transport is required to reach the plasma composition consistent with diagnostic measurements at the plasma edge. Fast ion redistribution by a sawtooth instability is characterised by non-resonant transport due to reconnection of magnetic field lines and resonant transport caused by resonance interaction between the instability and fast ions. With ORBIT simulations it has been shown that resonant interaction strongly affects fast ions of high energies, like beam ions accelerated by RF waves and fusion products. For the considered case, fast ion profiles simulated by ORBIT remain peaked after the sawtooth crashes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Study of ponderomotive instability in the FRIB beta=0.53 half-wave resonator

Superconducting radio-frequency niobium cavities are susceptible to deformations caused by external or internal forces, leading to shifts in the cavity resonant frequency. One source of deformation comes from the radiation pressure of the cavity fields, producing the so-called Lorentz force detuning effect. This effect can couple to the cavity mechanical modes in generator driven mode, leading to ponderomotive instability. In the FRIB 322 MHz, β=0.53 Half-wave Resonators (HWR), the instability appeared when the cavity was detuned, with thresholds depending on low-level RF control parameters, such as closed loop gain, as well as accelerating gradient. Using a measured Lorentz Transfer Function, Simulink simulations were conducted to predict the instability thresholds, which were then compared with the experimental results. We will discuss how these thresholds can be broadened to enable stable operation at higher gradients.

Accelerator Physics↗