Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rotor noise”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Scaling of helicopter main rotor noise in hover

A 2.1-m-diam, one-sixth-scale model helicopter main rotor was tested in hover at the NASA Ames Outdoor Aerodynamic Research Facility. It had previously been tested in hover in the NASA Ames 40- by 80-Foot Wind Tunnel test section. The primary objective of the tests was to obtain acoustic and performance data on a medium-scale rotor at various thrust coefficients and tip Mach numbers to compare to similar existing data on a full-scale helicopter main rotor. Information is presented on the effects of thrust- and tip-speed variation, the effects of boundary-layer trip strips, and the effects of wind conditions. In addition, a preliminary evaluation of the scaling of helicopter main-rotor noise in hover is presented. A secondary objective was to contribute to a data base that will permit the estimation of facility effects on acoustic testing.

Kitaplioglu, C.↗
NASA NTRS2012

Localized, Non-Harmonic Active Flap Motions for Low Frequency In-Plane Rotor Noise Reduction

A first-of-its-kind demonstration of the use of localized, non-harmonic active flap motions, for suppressing low frequency, in-plane rotor noise, is reported in this paper. Operational feasibility is verified via testing of the full-scale AATD/Sikorsky/UTRC active flap demonstration rotor in the NFAC's 40- by 80-Foot anechoic wind tunnel. Effectiveness of using localized, non-harmonic active flap motions are compared to conventional four-per-rev harmonic flap motions, and also active flap motions derived from closed-loop acoustics implementations. All three approaches resulted in approximately the same noise reductions over an in-plane three-by-three microphone array installed forward and near in-plane of the rotor in the nearfield. It is also reported that using an active flap in this localized, non-harmonic manner, resulted in no more that 2% rotor performance penalty, but had the tendency to incur higher hub vibration levels.

FLAPS(CONTROL SURFACES)↗
NASA NTRS1978

A simplified Mach number scaling law for helicopter rotor noise

Mach number scaling laws are derived for the rotational and the high-frequency broadband noise from helicopter rotors. The rotational scaling law is obtained directly from the theory of Lowson and Ollerhead (1969) by exploiting the properties of the dominant terms in the expression for the complex Fourier coefficients of sound radiation from a point source. The scaling law for the high-frequency broadband noise is obtained by assuming that the noise sources are acoustically compact and computing the instantaneous pressure due to an element on an airfoil where vortices are shed. Experimental results on the correlation lengths for stationary airfoils are extended to rotating airfoils. On the assumption that the correlation length varies as the boundary layer displacement thickness, it is found that the Mach number scaling law contains a factor of Mach number raised to the exponent 5.8. Both scaling laws were verified by model tests.

Aravamudan, K. S.↗
NASA NTRS1987

The uses and abuses of the acoustic analogy in helicopter rotor noise prediction

The generation of noise by helicopter rotor blades is considered theoretically, reviewing recent analyses based on the acoustic analogy (where the effect of fluid motion is replaced by fictitious sources in an undisturbed fluid). The fundamental principles of the acoustic approach are explained and illustrated with diagrams; the governing Ffowcs-Williams/Hawkings equations are written with a reformulated quadrupole term; and the directivity of noise produced (1) by regions with steep gradients (such as shock surfaces) and (2) by boundary-layer quadrupoles (tip-vortex and blade wakes) is shown to be the same as that of thickness noise. The need to include both (1) and (2) in acoustic-analogy computations is indicated.

Farassat, F.↗
NASA NTRS2015

Auralization of Tonal Rotor Noise Components of a Quadcopter Flyover

The capabilities offered by small unmanned vertical lift aerial vehicles, for example, quadcopters, continue to captivate entrepreneurs across the private, public, and civil sectors. As this industry rapidly expands, the public will be exposed to these devices (and to the noise these devices generate) with increasing frequency and proximity. Accordingly, an assessment of the human response to these machines will be needed shortly by decision makers in many facets of this burgeoning industry, from hardware manufacturers all the way to government regulators. One factor of this response is that of the annoyance to the noise that is generated by these devices. This paper presents work currently being pursued by NASA toward this goal. First, physics-based (CFD) predictions are performed on a single isolated rotor typical of these devices. The result of these predictions are time records of the discrete tonal components of the rotor noise. These time records are calculated for a number of points that appear on a lattice of locations spread over the lower hemisphere of the rotor. The source noise is then generated by interpolating between these time records. The sound from four rotors are combined and simulated-propagation techniques are used to produce complete flyover auralizations.

Christian, Andrew W.↗
NASA NTRS1972

Discrete rotor noise.

Description of a single unified theory to account generally for the discrete radiation from the whole family of heavily loaded axial flow rotors, including helicopter rotors, propellers, and compressors. The approach used is to analyze, in a Fourier way, the periodic blade loading variation (azimuth profile) into blade loading harmonics (BLH) and then sum the total radiation from each BLH. The basic differences between high and low solidity rotor spectrums are considered, emphasizing the difference between subsonic and supersonic rotor noise. The special effect of helicopter blade slap and compressor rotor-stator interaction is discussed, and measured rotor spectrums have been included to help illustrate the theory.

Wright, S. E.↗
NASA NTRS2019

Auralization of Unsteady Rotor Noise Using a Solution to the Ffowcs Williams-Hawkings Equation

Auralization of unsteady helicopter flight operations is needed to better understand the impact of maneuvers on community noise. Previous source sound synthesis methods were based on interpolated data, which may lead to artifacts in generating sound for helicopter maneuvers where sound pressure directivity may change rapidly. In this paper, the source sound is synthesized at every time sample using a solution to the Ffowcs Williams-Hawkings Equation along the path of the emission angle between the source and a ground observer. The synthesized sound is then propagated to the ground observer for auralization. Since no interpolation is performed, maneuvers with rapidly changing sound pressure directivities may be more accurately synthesized and auralized. The framework for accomplishing this synthesis and auralization is described, which couples the Fundamental Rotorcraft Acoustic Modeling from Experiments, the second-generation Aircraft NOise Prediction Program, and the NASA Auralization Framework. Synthesis of a hovering rotor is presented to compare with previous synthesis methods. Two examples with a periodic signals are then presented to demonstrate synthesis and auralization of unsteady rotor noise.

Krishnamurthy, Siddhartha↗
NASA NTRS1987

Rotor noise measurement using a directional microphone array

A directional array of microphones was used to measure the noise from a 40 percent scale model rotor in a large aeroacoustic wind tunnel. The development and design of this directional array is described. A design goal was that the array focus on a constant sensing area over a broad frequency range. The implementation of the array design is presented, followed by sample results for several different rotor test conditions. The directional array spectral results are compared with predictions of broadband self noise, and with total rotor noise measurements obtained from individual microphones of the array. The directional array is demonstrated to be a useful tool in examining noise source distributions.

Marcolini, Michael A.↗
NASA NTRS1986

Rotor noise due to atmospheric turbulence ingestion. I - Fluid mechanics

In the present analytical procedure for the prediction of helicopter rotor noise generation due to the ingestion of atmospheric turbulence, different models for turbulence fluid mechanics and the ingestion process are combined. The mean flow and turbulence statistics associated with the atmospheric boundary layer are modeled with attention to the effects of atmospheric stability length, windspeed, and altitude. The turbulence field can be modeled as isotropic, locally stationary, and homogeneous. For large mean flow contraction ratios, accurate predictions of turbulence vorticity components at the rotor face requires the incorporation of the differential drift of fluid particles on adjacent streamlines.

Simonich, J. C.↗
NASA NTRS1982

Rotor noise prediction technology: Theoretical approach

Helicopter rotors which are the most complicated noise generators among rotating blade machinery are discussed. The main or the tail rotor can be the dominant source of noise depending on the range of frequencies and the observer position. Significant advances in noise prediction were made. Acoustic analysis is the most successful and general theoretical method to treat the acoustics of helicopter noise. The aerodynamic approach is used to study nonlinear acoustic effects. The results of acoustic analogy depend greatly on the input data.

Farassat, F.↗
NASA NTRS1988

Study Of Helicopter-Tail-Rotor Noise

Report describes findings of experiment in generation of impulsive noise and fluctuating blade loads by helicopter tail rotor interacting with vortexes from main rotor. Experiment used model rotor and isolated vortex and designed to isolate blade/vortex interaction noise from other types of rotor noise.

Ahmadi, Ali R.↗
NASA NTRS1978

Wind tunnel investigations of model rotor noise at low tip speeds

Experimental and related analytical results on model rotor rotational and broadband noise obtained in the anechoic wind tunnel and rotor facility are summarized. Factors studied include various noise sources, effects of helicopter performance parameters on noise generated by a model main rotor, appropriate scaling laws for the various types of main rotor noise, and the effects of intensity and size scales of injected turbulence on the intensity and spectra of broadband noise.

Aravamudan, K. S.↗
NASA NTRS1991

Rotor noise

The physical characteristics and sources of rotorcraft noise as they exist today are presented. Emphasis is on helicopter-like vehicles, that is, on rotorcraft in nonaxial flight. The mechanisms of rotor noise are reviewed in a simple physical manner for the most dominant sources of rotorcraft noise. With simple models, the characteristic time- and frequency-domain features of these noise sources are presented for idealized cases. Full-scale data on several rotorcraft are then reviewed to allow for the easy identification of the type and extent of the radiating noise. Methods and limitations of using scaled models to test for several noise sources are subsequently presented. Theoretical prediction methods are then discussed and compared with experimental data taken under very controlled conditions. Finally, some promising noise reduction technology is reviewed.

Schmitz, F. H.↗
NASA NTRS2016

The Role of Flow Diagnostic Techniques in Fan and Open Rotor Noise Modeling

A principal source of turbomachinery noise is the interaction of the rotating and stationary blade rows with the perturbations in the airstream through the engine. As such, a lot of research has been devoted to the study of the turbomachinery noise generation mechanisms. This is particularly true of fan and open rotors, both of which are the major contributors to the overall noise output of modern aircraft engines. Much of the research in fan and open rotor noise has been focused on developing theoretical models for predicting their noise characteristics. These models, which run the gamut from the semi-empirical to fully computational ones, are, in one form or another, informed by the description of the unsteady flow-field in which the propulsors (i.e., the fan and open rotors) operate. Not surprisingly, the fidelity of the theoretical models is dependent, to a large extent, on capturing the nuances of the unsteady flowfield that have a direct role in the noise generation process. As such, flow diagnostic techniques have proven to be indispensible in identifying the shortcoming of theoretical models and in helping to improve them. This presentation will provide a few examples of the role of flow diagnostic techniques in assessing the fidelity and robustness of the fan and open rotor noise prediction models.

Noise Prediction↗
NASA NTRS2009

Open Rotor Noise Prediction Methods at NASA Langley- A Technology Review

Open rotors are once again under consideration for propulsion of the future airliners because of their high efficiency. The noise generated by these propulsion systems must meet the stringent noise standards of today to reduce community impact. In this paper we review the open rotor noise prediction methods available at NASA Langley. We discuss three codes called ASSPIN (Advanced Subsonic-Supersonic Propeller Induced Noise), FW - Hpds (Ffowcs Williams-Hawkings with penetrable data surface) and the FSC (Fast Scattering Code). The first two codes are in the time domain and the third code is a frequency domain code. The capabilities of these codes and the input data requirements as well as the output data are presented. Plans for further improvements of these codes are discussed. In particular, a method based on equivalent sources is outlined to get rid of spurious signals in the FW - Hpds code.

Farassat, F.↗
NASA NTRS1988

Helicopter main-rotor noise: Determination of source contributions using scaled model data

Acoustic data from a test of a 40 percent model MBB BO-105 helicopter main rotor are scaled to equivalent full-scale flyover cases. The test was conducted in the anechoic open test section of the German-Dutch Windtunnel (DNW). The measured data are in the form of acoustic pressure time histories and spectra from two out-of-flow microphones underneath and foward of the model. These are scaled to correspond to measurements made at locations 150 m below the flight path of a full-scale rotor. For the scaled data, a detailed analysis is given for the identification in the data of the noise contributions from different rotor noise sources. Key results include a component breakdown of the noise contributions, in terms of noise criteria calculations of a weighted sound pressure level (dBA) and perceived noise level (PNL), as functions of rotor advance ratio and descent angle. It is shown for the scaled rotor that, during descent, impulsive blade-vortex interaction (BVI) noise is the dominant contributor to the noise. In level flight and mild climb, broadband blade-turbulent wake interaction (BWI) noise is dominant due to the absence of BVI activity. At high climb angles, BWI is reduced and self-noise from blade boundary-layer turbulence becomes the most prominent.

Brooks, Thomas F.↗
NASA NTRS1978

Evaluation of the annoyance due to helicopter rotor noise

A program was conducted in which 25 test subjects adjusted the levels of various helicopter rotor spectra until the combination of the harmonic noise and a broadband background noise was judged equally annoying as a higher level of the same broadband noise spectrum. The subjective measure of added harmonic noise was equated to the difference in the two levels of broadband noise. The test participants also made subjective evaluations of the rotor noise signatures which they created. The test stimuli consisted of three degrees of rotor impulsiveness, each presented at four blade passage rates. Each of these 12 harmonic sounds was combined with three broadband spectra and was adjusted to match the annoyance of three different sound pressure levels of broadband noise. Analysis of variance indicated that the important variables were level and impulsiveness. Regression analyses indicated that inclusion of crest factor improved correlation between the subjective measures and various objective or physical measures.

Sternfeld, H., Jr.↗
NASA NTRS2013

Limitations of Phased Array Beamforming in Open Rotor Noise Source Imaging

Phased array beamforming results of the F31/A31 historical baseline counter-rotating open rotor blade set were investigated for measurement data taken on the NASA Counter-Rotating Open Rotor Propulsion Rig in the 9- by 15-Foot Low-Speed Wind Tunnel of NASA Glenn Research Center as well as data produced using the LINPROP open rotor tone noise code. The planar microphone array was positioned broadside and parallel to the axis of the open rotor, roughly 2.3 rotor diameters away. The results provide insight as to why the apparent noise sources of the blade passing frequency tones and interaction tones appear at their nominal Mach radii instead of at the actual noise sources, even if those locations are not on the blades. Contour maps corresponding to the sound fields produced by the radiating sound waves, taken from the simulations, are used to illustrate how the interaction patterns of circumferential spinning modes of rotating coherent noise sources interact with the phased array, often giving misleading results, as the apparent sources do not always show where the actual noise sources are located. This suggests that a more sophisticated source model would be required to accurately locate the sources of each tone. The results of this study also have implications with regard to the shielding of open rotor sources by airframe empennages.

Horvath, Csaba↗