Search NASA⌕ Search

SEARCH · Search NASA

Results for “Roughness Augmentation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Preliminary results of a study of the relationship between free-stream turbulence and stagnation region heat transfer

Preliminary results of a study to investigate the relationship between free stream turbulence and heat transfer augmentation in the stagnation region is presented. The effects of free stream turbulence and surface roughness on spanwise averaged heat transfer were investigated. Turbulence was measured upstream of a cylinder placed in the wake of an array of parallel wires that were perpendicular to the cylinder axis. Finally, flow visualization and thermal visualization techniques were combined to show the relationship between vortices in the stagnation region and spanwise variations in heat transfer.

Vanfossen, G. J., Jr.↗
NASA NTRS2016

Solar vs. Fission Surface Power for Mars

A multi-discipline team of experts from the National Aeronautics and Space Administration (NASA) developed Mars surface power system point design solutions for two conceptual missions. The primary goal of this study was to compare the relative merits of solar- versus fission-powered versions of each surface mission. First, the team compared three different solar power options against a fission power system concept for a sub-scale, uncrewed demonstration mission. The 4.5 meter (m) diameter pathfinder lander's primary mission would be to demonstrate Mars entry, descent, and landing techniques. Once on the Martian surface, the lander's In Situ Resource Utilization (ISRU) payload would demonstrate liquid oxygen propellant production using atmospheric resources. For the purpose of this exercise, location was assumed to be at the Martian equator. The three solar concepts considered included a system that only operated during daylight hours (at roughly half the daily propellant production rate of a round-the-clock fission design), a battery-augmented system that operated through the night (matching the fission concept's propellant production rate), and a system that operated only during daylight, but at a higher rate (again, matching the fission concept's propellant production rate). Including 30% mass growth allowance, total payload masses for the three solar concepts ranged from 1,116 to 2,396 kg, versus the 2,686 kg fission power scheme. However, solar power masses are expected to approach or exceed the fission payload mass at landing sites further from the equator, making landing site selection a key driver in the final power system decision. The team also noted that detailed reliability analysis should be performed on daytime-only solar power schemes to assess potential issues with frequent ISRU system on/off cycling. Next, the team developed a solar-powered point design solution for a conceptual four-crew, 500-day surface mission consisting of up to four landers per crewed expedition mission. Unlike the demonstration mission, a lengthy power outage due to the global dust storms that are known to occur on Mars would pose a safety hazard to a crewed mission. A similar fission versus solar power trade study performed by NASA in 2007 concluded that fission power was more reliable-with a much lower mass penalty-than solar power for this application. However, recent advances in solar cell and energy storage technologies and changes in operational assumptions prompted NASA to revisit the analysis. For the purpose of this exercise a particular landing site at Jezero Crater, located at 18o north latitude, was assumed. A fission power system consisting of four each 10 kW Kilopower fission reactors was compared to a distributed network of Orion-derived Ultraflex solar arrays and Lithium ion batteries mounted on every lander. The team found that a solar power system mass of about 9,800 kg would provide the 22 kilowatts (kW) keep-alive power needed to survive a dust storm lasting up to 120-days at average optical depth of 5, and 35 kW peak power for normal operations under clear skies. Although this is less than half the mass estimated during the 2007 work (which assumed latitudes up to 30o) it is still more than the 7,000 kg mass of the fission system which provides full power regardless of dust storm conditions.

Rucker, Michelle A.↗
NASA NTRS2016

Solar Versus Fission Surface Power for Mars

A multi-discipline team of experts from the National Aeronautics and Space Administration (NASA) developed Mars surface power system point design solutions for two conceptual missions to Mars using In-situ resource utilization (ISRU). The primary goal of this study was to compare the relative merits of solar- versus fission-powered versions of each surface mission. First, the team compared three different solar-power options against a fission power system concept for a sub-scale, uncrewed demonstration mission. This “pathfinder” design utilized a 4.5 meter diameter lander. Its primary mission would be to demonstrate Mars entry, descent, and landing techniques. Once on the Martian surface, the lander’s ISRU payload would demonstrate liquid oxygen propellant production from atmospheric resources. For the purpose of this exercise, location was assumed to be at the Martian equator. The three solar concepts considered included a system that only operated during daylight hours (at roughly half the daily propellant production rate of a round-the-clock fission design), a battery-augmented system that operated through the night (matching the fission concept’s propellant production rate), and a system that operated only during daylight, but at a higher rate (again, matching the fission concept’s propellant production rate). Including 30% mass growth allowance, total payload masses for the three solar concepts ranged from 1,128 to 2,425 kg, versus the 2,751 kg fission power scheme. However, solar power masses increase as landing sites are selected further from the equator, making landing site selection a key driver in the final power system decision. The team also noted that detailed reliability analysis should be performed on daytime-only solar power schemes to assess potential issues with frequent ISRU system on/off cycling.

Rucker, Michelle A.↗
NASA NTRS1959

A Flight Investigation to Determine the Lateral Oscillatory Damping Acceptable for an Airplane in the Landing Approach

An F-86E airplane, in which servo actuation of the ailerons and rudder provides artificial variation of the important lateral and directional aerodynamic stability parameters, has been flown by test pilots of the NASA, U.S. Air Force, and one aircraft manufacturer to determine satisfactory and acceptable levels of lateral oscillatory damping in the landing approach. In addition to normal operational use, particular consideration was given to the emergency condition of failure of stability-augmentation equipment. In this study, the pilots' opinions of the airplane dynamic stability and control characteristics in smooth and simulated rough air have been recorded according to a numerical rating scale. The results are presented in the form of boundaries in terms of cycles to damp to half amplitude, 1/C(sub 1/2), or time to damp to half amplitude, 1/T(1/2) and bank-to-sideslip ratio, and are discussed in relation to existing flying-qualities criteria. Though the present results, which were obtained at 170 knots indicated airspeed and 10,000-feet altitude, indicated that increased damping is required with increased bank-to-sideslip ratio (as found in previous work), consideration of the dampers-failed condition indicated a great reduction in the minimum acceptable damping. At moderate values of bank-to-sideslip ratio, effects of lateral-oscillation period on pilot-opinion variation with damping appeared to be taken into account by use of the parameter 1/T(sub 1/2).

McNeill, Walter E.↗
NASA NTRS1987

Pressure-Assisted Seal for Castings

Modification of widely used pressure-assisted gasket ensures tight seal even when one sealed surface somewhat rough or porous. Modified U-cross-section gasket has thin lips increasing sealing area and conform to slightly rough surface. Lips provide wider sealing area and extend highly loaded region at tip. Coating of polytetrafluoroethylene on tip and lip augments conformance.

Stuck, Donald E.↗
NASA NTRS2022

Model Predictive Control in the Three-body Problem Using Invariant Funnels As Terminal Sets

This paper describes a method for augmenting Model Predictive Control techniques using invariant funnels computed in the Circular Restricted Three-Body Problem. We use ellipsoids that roughly approximate the boundary of the invariant funnel as convex terminal sets for a short look-ahead optimization problem at each time step. We apply this method to a hypothetical low-thrust mission to land on Jupiter’s mooon Europa and show that including the invariant funnels as terminal sets reduces the amount of control effort required by almost an order of magnitude.

Close, Sigrid↗
NASA NTRS2004

Validation and Improvement of SRTM Performance over Rugged Terrain

We have previously reported work related to basic technique development in phase unwrapping and generation of digital elevation models (DEM). In the final year of this work we have applied our technique work to the improvement of DEM's produced by SRTM. In particular, we have developed a rigorous mathematical algorithm and means to fill in missing data over rough terrain from other data sets. We illustrate this method by using a higher resolution, but globally less accurate, DEM produced by the TOPSAR airborne instrument over the Galapagos Islands to augment the SRTM data set in this area, We combine this data set with SRTM to use each set to fill in holes left over by the other imaging system. The infilling is done by first interpolating each data set using a prediction error filter that reproduces the same statistical characterization as exhibited by the entire data set within the interpolated region. After this procedure is implemented on each data set, the two are combined on a point by point basis with weights that reflect the accuracy of each data point in its original image. In areas that are better covered by SRTM, TOPSAR data are weighted down but still retain TOPSAR statistics. The reverse is true for regions better covered by TOPSAR. The resulting DEM passes statistical tests and appears quite feasible to the eye, but as this DEM is the best available for the region we cannot fully veri@ its accuracy. Spot checks with GPS points show that locally the technique results in a more comprehensive and accurate map than either data set alone.

Zebker, Howard A.↗
DOE OSTI2024

Evaluating community solar as a measure to promote equitable clean energy access

Rooftop and community solar are alternative product classes for residential solar in the United States. Community solar, where multiple households buy solar from shared systems, could make solar more accessible by reducing initial costs and removing adoption barriers for renters and multifamily building occupants. Here we test whether community solar has expanded solar access in the United States. On the basis of a sample of 11 states, we find that community solar adopters are about 6.1 times more likely to live in multifamily buildings than rooftop solar adopters, 4.4 times more likely to rent and earn 23% less annual income. In this study, we do not find that community solar expands access in terms of race. These differences are driven, roughly evenly, by inherent differences between the two solar products and by policies to promote low-income community solar adoption. The results suggest that alternative solar products can expand solar access and that policy could augment such benefits.

14 SOLAR ENERGY↗
NASA NTRS2004

The Feasibility of Multipole Electrostatic Radiation Shielding

Although passive shielding appears to be the only workable solution for galactic cosmic radiation (GCR), active shielding may play an important augmenting role to control the dose from solar particle events (SPEs). It has been noted that, to meet the guidelines of NCRP Report No. 98 through the six SPEs of 1989, a crew member would need roughly double the passive shielding that is necessary to control the GCR dose . This would dramatically increase spacecraft mass, and so it has been proposed that a small but more heavily shielded storm shelter may be used to protect the crew during SPEs. Since a gradual SPE may last 5 or more days, staying in a storm shelter may be psychologically and physiologically distressing to the crew. Storm shelters do not provide shielding for the spacecraft itself against the SPE radiation, and radiation damage to critical electronics may result in loss of mission and life. Single-event effects during the radiation storm may require quick crew response to maintain the integrity of the spacecraft, and confining the crew to a storm shelter prohibits their attending to the spacecraft at the precise time when that attention is needed the most. Active shielding cannot protect against GCR because the particle energies are too high. Although lower energy particles are easier to stop in a passive shield, such shielding is more satisfactory against GCR than against SPE radiation because of the tremendous difference in their initial fluences. Even a small fraction of the SPE fluence penetrating the passive shielding may result in an unacceptably high dose. Active shielding is more effective than passive shielding against SPE radiation because it offers 100% shielding effectiveness up to the cutoff energy, and significant shielding effectiveness beyond the cutoff as well.

Metzger, Philip T.↗
NASA NTRS2011

Long-Term International Space Station (ISS) Risk Reduction Activities

As the assembly of the ISS nears completion, it is worthwhile to step back and review some of the actions pursued by the Program in recent years to reduce risk and enhance the safety and health of ISS crewmembers, visitors, and space flight participants. While the initial ISS requirements and design were intended to provide the best practicable levels of safety, it is always possible to further reduce risk given the determination, commitment, and resources to do so. The following is a summary of some of the steps taken by the ISS Program Manager, by our International Partners, by hardware and software designers, by operational specialists, and by safety personnel to continuously enhance the safety of the ISS, and to reduce risk to all crewmembers. While years of work went into the development of ISS requirements, there are many things associated with risk reduction in a Program like the ISS that can only be learned through actual operational experience. These risk reduction activities can be divided into roughly three categories: Areas that were initially noncompliant which have subsequently been brought into compliance or near compliance (i.e., Micrometeoroid and Orbital Debris [MMOD] protection, acoustics) Areas where initial design requirements were eventually considered inadequate and were subsequently augmented (i.e., Toxicity hazard level-4 materials, emergency procedures, emergency equipment, control of drag-throughs) Areas where risks were initially underestimated, and have subsequently been addressed through additional mitigation (i.e., Extravehicular Activity [EVA] sharp edges, plasma shock hazards). Due to the hard work and cooperation of many parties working together across the span of more than a decade, the ISS is now a safer and healthier environment for our crew, in many cases exceeding the risk reduction targets inherent in the intent of the original design. It will provide a safe and stable platform for utilization and discovery for years to come.

Forroci, Michael P.↗
NASA NTRS2011

International Space Station (ISS) Risk Reduction Activities

As the assembly of the ISS nears completion, it is worthwhile to step back and review some of the actions pursued by the Program in recent years to reduce risk and enhance the safety and health of ISS crewmembers, visitors, and space flight participants. While the ISS requirements and initial design were intended to provide the best practicable levels of safety, it is always possible to reduce risk -- given the determination and commitment to do so. The following is a summary of some of the steps taken by the ISS Program Manager, by our International Partners, by hardware and software designers, by operational specialists, and by safety personnel to continuously enhance the safety of the ISS. While decades of work went into developing the ISS requirements, there are many things in a Program like the ISS that can only be learned through actual operational experience. These risk reduction activities can be divided into roughly three categories: (1) Areas that were initially noncompliant which have subsequently been brought into compliance or near compliance (i.e., Micrometeoroid and Orbital Debris [MMOD] protection, acoustics) (2) Areas where initial design requirements were eventually considered inadequate and were subsequently augmented (i.e., Toxicity Level 4 materials, emergency hardware and procedures) (3) Areas where risks were initially underestimated, and have subsequently been addressed through additional mitigation (i.e., Extravehicular Activity [EVA] sharp edges, plasma shock hazards) Due to the hard work and cooperation of many parties working together across the span of nearly a decade, the ISS is now a safer and healthier environment for our crew, in many cases exceeding the risk reduction targets inherent in the intent of the original design. It will provide a safe and stable platform for utilization and discovery.

Fodroci, Michael↗
NASA NTRSDate not supplied

A Study of Large Scale Power Extraction and Insertion on Turbofan Performance and Stability

This describes the effects of turbofan power extraction and insertion (augmentation) on engine performance and stability. The purpose of this paper is to present how power augmentation affects a dual spool gas turbine engine cycle where the engine will also be required to provide thrust. The goals for the paper are to describe effective limits of power augmentation and offer strategies, utilizing spool choice and variable geometries, to maximize augmentation effect. While Analysis is general, two potential uses are explored: Power extraction for electrified aircraft propulsion and power insertion for thrust assist. Results of the paper show it is possible to extract over 20% (at 85% max thrust) and gain roughly 12% of maximum thrust through power insertion.

Gas Turbine engines↗
NASA NTRS2021

A Study of Large-Scale Power Extraction and Insertion on Turbofan Performance and Stability

This paper describes the effects of turbofan power extraction and insertion (augmentation) on engine performance and stability. The purpose of this paper is to present how power augmentation affects a dual spool gas turbine engine cycle where the engine will also be required to provide thrust. The goals for the paper are to describe effective limits of power augmentation and offer strategies, utilizing spool choice and variable geometries, to maximize augmentation effect. While Analysis is general, two potential uses are explored: Power extraction for electrified aircraft propulsion and power insertion for thrust assist. Results of the paper show it is possible to extract over 20% (at 85% max thrust) and gain roughly 12% of maximum thrust through power insertion.

Gas Turbine engines↗
NASA NTRS1989

Erosive burning threshold conditions in solid rocket motors

Erosive burning has been predicted to be enhanced by factors that increase the level of turbulence close to the propellant surface, such a high cross flow velocity, low surface blowing rate, propellant surface roughness, and adverse pressure gradient. A study is reported which was carried out with the objective of measuring the effects of these parameters on the scaling to larger rocket motor sizes of the transition to, or threshold conditions for, erosive burning rate augmentation. The results are used to develop a scaling criterion for the threshold conditions for erosive burning.

Strand, L. D.↗
NASA NTRSDate not supplied

A Study of Large Scale Power Extraction and Insertion on Turbofan Performance and Stability

This paper describes the effects of turbofan power extraction and insertion (augmentation) on engine performance and stability. The purpose of this paper is to present how power augmentation affects a dual spool gas turbine engine cycle where the engine will also be required to provide thrust. The goals for the paper are to describe effective limits of power augmentation and offer strategies, utilizing spool choice and variable geometries, to maximize augmentation effect. While Analysis is general two potential uses are explored: Power extraction for electrified aircraft propulsion purposes. And, Power insertion for thrust assist. Results of the paper show it is possible to extract over 20% (at 85% max thrust) and gain roughly 12% of maximum thrust through power insertion.

Gas Turbine Engines↗
NASA NTRS2005

Reciprocating Feed System Development Status

The reciprocating feed system (RFS) is an alternative means of providing high pressure propellant flow at low cost and system mass, with high fail-operational reliability. The RFS functions by storing the liquid propellants in large, low-pressure tanks and then expelling each propellant through two or three small, high-pressure tanks. Each RFS tank is sequentially filled, pressurized, expelled, vented, and refilled so as to provide a constant, or variable, mass flow rate to the engine. This type of system is much lighter than a conventional pressure fed system in part due to the greatly reduced amount of inert tank weight. The delivered payload for an RFS is superior to that of conventional pressure fed systems for conditions of high total impulse and it is competitive with turbopump systems, up to approximately 2000 psi. An advanced version of the RFS uses autogenous pressurization and thrust augmentation to achieve higher performance. In this version, the pressurization gases are combusted in a small engine, thus making the pressurization system, in effect, part of the propulsion system. The RFS appears to be much less expensive than a turbopump system, due to reduced research and development cost and hardware cost, since it is basically composed of small high- pressure tanks, a pressurization system, and control valves. A major benefit is the high reliability fail-operational mode; in the event of a failure in one of the three tank-systems, it can operate on the two remaining tanks. Other benefits include variable pressure and flow rates, ease of engine restart in micro-gravity, and enhanced propellant acquisition and control under adverse acceleration conditions. We present a system mass analysis tool that accepts user inputs for various design and mission parameters and calculates such output values payload and vehicle weights for the conventional pressure fed system, the RFS, the Autogenous Pressurization Thrust Augmentation (APTA) RFS, and turbopump systems. Using this tool, a preliminary design of a representative crew exploration vehicle (CEV) has been considered. The design parameters selected for a representative system were modeled after the orbital maneuvering system (OMS) on the Shuttle Orbiter, with an increase of roughly a factor of ten in the delta- V capability and a greater thrust (30,000 lbs, vs. 12,000 lbs). Both storable and cryogenic propellants were considered. Results show that a RFS is a low mass alternative to conventional pressure fed systems, with a substantial increase in payload capability and that it is weight-competitive with turbopump systems at low engine pressure (a few hundred psi); at high engine pressures, the APTA RFS appears to offer the highest payload. We also present the status of the RFS test bed fabrication, assembly, and checkout. This test bed is designed to provide flow rates appropriate for engines in the roughly 10,000 to 30,000 lb thrust range.

Trewek, Mary↗
DOE OSTI2022

Measurement of Charged Current Inclusive $\bar{V}_\mu$ Interactions and 2p2h Contribution Using the NOvA Near Detector

More precise measurements of the scattering of antineutrinos on nuclei in the few GeV region of incident energy, $E_{\nu}$, can reveal new aspects of $v/\bar{v}$ interactions and of nuclear structure, while providing information crucial to continued progress by neutrino oscillation experiments. This Thesis reports an investigation of charged current $\bar{v}_\mu$ interactions in the predominantly hydrocarbon medium of the NOvA Near Detector. The data are obtained with the detector exposed to a narrow-band $\bar{v}$ µ beam with spectral peak at E ν = 2.0 GeV, for a total accumulated exposure of 12.5×10$^{20}$ protons-on-target. The analysis expresses results in terms of three-momentum transfer,|$\vec{q}$| and available hadronic energy, $E$ avail . These variables approximate (q 0 , |$\vec{q}$|), the variables used in theoretical treatments of lepton scattering on multi-nucleon systems such as in 2-particle-2-hole (2p2h) processes. This Thesis delivers two core measurements: Firstly, the double-dierential cross section $d^2σ/d|\vec{q} |dE_{avail}$ for inclusive CC $\bar{v}_\mu$ interactions in the NOvA detector medium is obtained. The cross section has a roughly gaussian shape in its projection onto |$\vec{q}$|, while being largely concentrated at values of $E$ avail below 100 MeV. The single diferential cross sections dσ/d|$\vec{q}$| and dσ/dE avail are also obtained, and are compared to predictions based on the GENIE v3.0.6 neutrino generator augmented with four different implementations of 2p2h reactions. Secondly, the contribution of 2p2h reactions to the CC inclusive scattering sample is determined. Its presence is characterized in terms of double-differential and single-differential cross sections. The latter 2p2h distributions are compared to predictions from two experimental data-tune models and from two theory-based models, namely the SuSAv2 model and the Valencia model. Both of the theoretical models underpredict the measured cross-section strength and predict a shape for dσ/d|$\vec{q}$| that is flatter than the measured shape. Thus, this Thesis provides new information about CC antineutrino-nucleus scattering in the vicinity of Eν ~ 2 GeV, and it highlights improvements that are needed in theoretical treatments of 2p2h reactions.

43 PARTICLE ACCELERATORS↗
NASA NTRS2015

Swarm Flyby Gravimetry

This study describes a new technology for discerning the gravity fields and mass distribution of a solar system small body, without requiring dedicated orbiters or landers. Instead of a lander, a spacecraft releases a collection of small, simple probes during a flyby past an asteroid or comet. By tracking those probes from the host spacecraft, one can estimate the asteroid's gravity field and infer its underlying composition and structure. This approach offers a diverse measurement set,equivalent to planning and executing many independent and unique flyby encounters of a single spacecraft. This report assesses a feasible hardware implementation, derives the underlying models,and analyzes the performance of this concept via simulation.In terms of hardware, a small, low mass, low cost implementation is presented, which consists of a dispenser and probes. The dispenser contains roughly 12 probes in a tube and has a total size commensurate with a 6U P-Pod. The probes are housed in disc shaped sabots. When commanded,the dispenser ejects the top-most probe using a linear motor. The ejected probe separates from its sabots and unfolds using internal springs. There are two types of probes, each designed for a particular tracking modality. The reflective probe type, tracked by a telescope, unfolds to forma diffusely reflective sphere. The retroreflector probe type, tracked by a lidar, unfolds to form a corner-cube retroreflector assembly. Both types are designed to spherical so that their attitude doesn't affect the spacecraft's tracking performance.This analysis indicates that the point-mass term of small bodies larger than roughly 500 m in diameter can be observed from a host spacecraft that tracks locally deployed probes throughout a flyby to an uncertainty of better than 5%. The conditions by which this measurement is possible depends on the characteristics of the asteroid (size, type), the flyby velocity, and the type of tracking available (angles-only or angles+ranging). For most encounters, a few (1-3) well placed probes can be very effective, with marginal improvement for additional probes. Given realistic deployment errors, an encounter may require roughly 10-12 probes to ensure that 1-3 achieve their target. Long duration tracking of probes flying by large asteroids (>5 km diameter) can sometimes provide observability of the gravity field's first spherical harmonic, J( sub 2). In summary, this method offers a feasible, affordable approach to enabling or augmenting flyby science.

Atchison, Justin↗