An automated system for processing and distributing SIRTF telemetry data
Explore the source record for details and available documents.
MIPL↗
SEARCH · Search NASA
Results for “SIRTF Operations”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Mechanical pumps for superfluid helium transfer in space
Two alternate mechanical pump concepts have been identified for the transfer of superfluid helium in space. Both pumps provide flow at sufficient head and have operating characteristics suitable for the Space Infrared Telescope Facility (SIRTF) refill mission. One pump operates at a relatively low speed and utilizes mechanical roller bearings, while the other operates at a higher rotational speed using either electromagnetic or tilting pad gas-dynamic bearings. The use of gas bearings requires transfer of normal helium so that the gas pressure within the pump casing is high enough to operate the bearings. The operating characteristics of both pumps are predicted, the dimensions are estimated and major technology issues are identified. The major issues for each pump design are cavitation performance and bearing development. Roller bearings require quantified reliability for operation in space while electromagnetic bearings require basic development as well as a complex control system. The low speed pump has significantly poorer hydraulic efficiency than the high speed pump.
Izenson, M. G.↗
SIRTF in high earth orbit
The goals, requirements and operation of the Space Infrared Telescope Facility (SIRTF) are discussed. Emphasis is upon an analysis of the options of high and low earth orbits for the mission. The consensus was that the high earth orbit offers significant scientific and engineering advantages for SIRTF.
Werner, Michael W.↗
Cryogenic and Thermal Aspects of the SIRTF Warm Launch Concept
A fundamentally new concept is being explored for cryogenic operation of the Space Infrared Telescope Facility (SIRTF). In this concept, the helium dewar and instruments would be launched at liquid helium temperature while the telescope and external radiation shields are at room temperature. Once on-orbit, the telescope and the radiation shields would be cooled radiatively to about 70 K. Helium vapor is then used to bring the telescope down to its final operating temperature of 5.5 K. We present a design which meets SIRTF requirements and discuss its merit.
SIRTF Warm Launch↗
Comet Observations with SIRTF
Comet observations are included in the programs of the Guaranteed Time Observers (GTO) on the Space Infrared Telescope Facility (SIRTF), scheduled to be in space and operational for five years beginning in late 2003. SIRTF is a cryogenic telescope with three basic instruments for imaging, photometry and spectroscopy from 3.6 m to 160 m. All of these capabilities will be used in studies of comets. The intent is to study the infrared radiation (emission) from comets (and dust tails, where relevant) in all stages of evolution, starting with Kuiper Belt objects and Centaurs (thermal emission at 24,70, and 160 m to derive dimensions and albedos). Active comets will be observed spectroscopically and in deep thermal images. Several known or suspected extinct comets will be observed spectroscopically (5-37 m) for information on their surface compositions. There are opportunities for Guest Observers (GO) to propose additional comet work. .
Cruikshank, Dale P.↗
Prototype secondary mirror assembly design for the space infrared telescope facility
The authors describe the design of a liquid helium temperature prototype secondary mirror assembly (PSMA) under developement for the NASA Space Infrared Telescope Facility (SIRTF) program. The SIRTF secondary mirror assembly must operate below 4 K and provide highly precise two-axis dynamic tilting (chopping) in addition to the conventional functions needed by the SIRTF observatory. The PSMA design uses a fused quartz mirror kinematically attached at its center to an aluminum cruciform. The mirror/cruciform assembly is driven in tilt about its combined center of mass using a unique flexure pivot and a four-actuator control system with feedback provided by pairs of differential position sensors. The voice coil actuators are mounted on a second flexture-pivoted mass, enhancing servo system stability and isolating the telescope from vibration-induced disturbances. The mirror/cruciform and the reaction mass are attached to opposite sides of an aluminum mounting plate whose dimensional characteristics are nominally identical to those of the aluminum flexure pivot material. The mounting plate is connected to the outer housing by a six-degree-of-freedom focus and centering mechanism using pivoted actuation levers driven by lead screw/harmonic drive/stepper motor assemblies.
Stier, M.↗
Using SIRTF to study extragalactic star formation
SIRTF, the Space Infrared Telescope Facility, is a NASA mission to provide a long lifetime, sensitive and flexible infrared observatory in space. SIRTF will be able to study selected objects with a sensitivity over 5,000 time better than the IRAS survey limits, and will provide photometric and low to medium resolution spectroscopic data over almost nine octaves from 1.8 to 700 micron wavelength. The baseline SIRTF design has an 85 cm telescope with optics and control system designed for diffraction limited operation at 4 micron and longer wavelengths. SIRTF will be able to measure important cooling lines from neutral regions, such as the 157 micron line, and lines from H II regions such as the 88 micron line. SIRTF will also be able to survey small areas of the sky to the confusion limit in the 3 to 700 micron region.
Wright, Edward L.↗
Space infrared telescope facility project
The functions undertaken during this reporting period were: to inform the planetary science community of the progress and status of the Space Infrared Telescope Facility (SIRTF) Project; to solicit input from the planetary science community on needs and requirements of planetary science in the use of SIRTF at such time that it becomes an operational facility; and a white paper was prepared on the use of the SIRTF for solar system studies.
Cruikshank, Dale P.↗
SIRTF focal plane technologies
The Space Infrared Telescope Facility (SIRTF) will have three science instruments, the Infrared Array Camera (IRAC) which will obtain multispectral images between 1.8 micron and 26 microns, the Infrared Spectrometer (IRS) which is a set of two dispersive spectrometers covering the wavelength range between 2.5 and 200 microns, and the Multiband Imaging Photometer for SIRTF (MIPS) which is a general-purpose photometric instrument which operates between 30 and 1,200 microns. Taken together, the full wavelength range of these instruments extends from 1.8 micron to 1,200 microns, equivalent to nearly a factor of 700 in photon energy and diffraction limited image size. In addition to supporting this unprecedented spectral and optical coupling requirement, the SIRTF detectors must operate at lower temperatures than previously demonstrated and be optimized for new levels of performance in order to achieve the goals of the science mission. Thus, development of the detector arrays for the SIRTF instruments is one of the most challenging aspects of the instrument development activities.
Capps, Richard W.↗
Fused silica mirror evaluation for the Shuttle Infrared Telescope Facility (SIRTF)
The SIRTF optics are intended for operation at 20 K (or less); it will be extremely inconvenient, expensive, and time consuming if it becomes necessary to accomplish all of the optical element testing, assembly, and alignment at comparable temperatures. The thermal strain behavior, including potential anisotropies and inhomogeneities, of a mirror substrate between room temperature and 20 K thus becomes a major factor in the selection of the substrate material, structural configuration, and joining methods for lightweight structures. With support from Space Projects, NASA Ames Research Center, an optical figure evaluation of a 0.65-meter, lightweight, fused silica mirror at a low-temperature goal of 20 K is being conducted. The design details of a thermal shroud, provisions for extracting heat from the low-conductivity mirror, and wavefront error sources other than the mirror surface are discussed and preliminary test results presented.
Barnes, W. P., Jr.↗
The Development and Mission of the Space Infrared Telescope Facility
This paper provides an overview of the SIRTF mission, telescope, cryostat, instruments, spacecraft, orbit, operations and project management approach; and this paper serves as an introduction to the accompanying set of detailed papers about specific aspects of SIRTF.
Spitzer Space Telescope↗
System design parameter study for Shuttle Infrared Telescope Facility (SIRTF)
SIRTF is a high-sensitivity, cooled astronomical telescope operating from 2 to 1000 microns. The techniques used in analyzing the sensitivity of the SIRTF system performance to several technical issues are presented. Lowering the telescope temperature to near 4K is found to produce margin in several areas. A refined observing requirements model relieves the hardware performance requirements, and identifies extended source size/observing strategy as an important system specification. Other major conclusions are presented.
Mord, A. J.↗
SIRTF, the Space Infrared Telescope Facility
The Space Infrared Telescope Facility (SIRTF) is the last of the NASA Great Observatories, and a cornerstone of the NASA Origins Missions. The Observatory will include an 85 cm telescope in a unique orbit around the sun. The telescope will be launched at ambient temperature and cooled to 5.5K in space. The science instruments will use large detector arrays that will be background limited, and capable of a broad range of astrophysical investigations. The SIRTF architecture will accommodate up to 5 years of cryogenic space operations. This talk will describe both the scientific and technical capabilities of SIRTF.
Simmons, Larry L.↗
Complementarity of NGST, ALMA, and Far IR Space Observatories
The Next Generation Space Telescope (NGST) and the Atacama Large Millimeter Array (ALMA) will both start operations long before a new far IR observatory to follow SIRTF into space can be launched. What will be unknown even after they are operational, and what will a far IR space observatory be able to add? I will compare the telescope design concepts and capabilities and the advertised scientific programs for the projects and attempt to forecast the research topics that will be at the forefront in 2010.
Mather, John C.↗
Concepts for on-orbit servicing of SIRTF
The usable lifetime of the Space Infrared Telescope Facility (SIRTF) has been assumed to be limited to about two years by the lifetime of the superfluid helium carried in the telescope dewar. Concepts are presented for extending the system life by replenishing the cryogen on orbit, and for replacing the focal plane instruments. The operational aspects and the modifications to the baseline SIRTF are examined. It appears to be feasible to perform these servicing operations based on either the Space Shuttle or on the Space Station.
Mord, A. J.↗
The SIRTF in-orbit checkout and science verification plan
This paper describes a nominal mission plan that progressively establishes SIRTF capabilities during the IOC/SV phases, taking into consideration thermal, cryogrenic, optical, communications, celestial mechanics, and operational designs and constraints.
SIRTF↗
Development of the Space Infrared Telescope Facility (SIRTF)
This paper will provide an overview of the SIRTF mission, telescope, cryostat, instruments, spacecraft, orbit, and operations in preparation for an accompanying set of detailed technical presentations.
SIRTF↗
Spitzer Space Telescope Sequencing Operations Software, Strategies, and Lessons Learned
The Space Infrared Telescope Facility (SIRTF) was launched in August, 2003, and renamed to the Spitzer Space Telescope in 2004. Two years of observing the universe in the wavelength range from 3 to 180 microns has yielded enormous scientific discoveries. Since this magnificent observatory has a limited lifetime, maximizing science viewing efficiency (ie, maximizing time spent executing activities directly related to science observations) was the key operational objective. The strategy employed for maximizing science viewing efficiency was to optimize spacecraft flexibility, adaptability, and use of observation time. The selected approach involved implementation of a multi-engine sequencing architecture coupled with nondeterministic spacecraft and science execution times. This approach, though effective, added much complexity to uplink operations and sequence development. The Jet Propulsion Laboratory (JPL) manages Spitzer s operations. As part of the uplink process, Spitzer s Mission Sequence Team (MST) was tasked with processing observatory inputs from the Spitzer Science Center (SSC) into efficiently integrated, constraint-checked, and modeled review and command products which accommodated the complexity of non-deterministic spacecraft and science event executions without increasing operations costs. The MST developed processes, scripts, and participated in the adaptation of multi-mission core software to enable rapid processing of complex sequences. The MST was also tasked with developing a Downlink Keyword File (DKF) which could instruct Deep Space Network (DSN) stations on how and when to configure themselves to receive Spitzer science data. As MST and uplink operations developed, important lessons were learned that should be applied to future missions, especially those missions which employ command-intensive operations via a multi-engine sequence architecture.
missions operations↗