Search NASA⌕ Search

SEARCH · Search NASA

Results for “SODIUM COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Assessing microbial systems and process configurations for improved ethanol production from sugary stovers by integrating soluble sugars and holocellulose

Here, this study evaluated microbial systems and technological approaches to configure the whole slurry co-fermentation process for ethanol biosynthesis from a novel stover system rich in sugars. Two approaches, namely separate and simultaneous hydrolysis and co-fermentation (SHCF and SSCF, respectively), were investigated using Escherichia coli monoculture and E. coli-yeast coculture. The SSCF with E. coli monoculture produced 32.75 g/L ethanol, representing only 44.87% yield, which left 65.13 g/L of total sugars unconverted and exhibited limited xylose consumption. Subsequently, a coculture-based SHCF significantly enhanced sugar consumption, leading to increase in ethanol yield and concentration to 66.94% and 48.86 g/L, respectively. Nevertheless, xylose utilization remained minimal due to the preference for glucose and the inhibitory effects of certain compounds. Thereafter, modification of the medium composition by supplementing betaine and sodium metabisulfite improved ethanol production to 53.18 g/L by reducing the toxic effects of inhibitors. Finally, a dual-phase SSCF (DP-SSCF) was explored by allowing the consumption of sugars from the pretreated slurry in the first phase, followed by concurrent cellulose hydrolysis and utilization of the resulting glucose in the second phase. This strategy increased ethanol titer to 63.14 g/L, with 84.3% yield and 0.88 g/L/h productivity.

09 BIOMASS FUELS↗
DOE OSTI2023

Calorimetric Study of Mixed Phosphates Na 4 M 3 (PO 4 ) 2 P 2 O 7 (M = Mn 2+ , Fe 2+ , Co 2+ , Ni 2+ ) to Evaluate the Electrochemical Trends

Mixed polyanionic compounds have been studied extensively as viable cathode materials for sodium-ion batteries. Mixed phosphates, Na 4 M 3 (PO 4 ) 2 P 2 O 7 (M = Mn 2+ , Fe 2+ , Co 2+ , Ni 2+ ), provide a low barrier for Na-ion diffusion, being advantageous in comparison to phosphates and pyrophosphates. The reported order of sodium extraction is ambiguous and remains unclear. Despite being structurally similar, electrochemical performance differs for all four analogues with different degrees of (de)sodiation, according to the transition element present. High-temperature oxide melt solution calorimetry has been used to establish the relation between thermodynamic phase stability and observed capacity for this series of mixed phosphates. Thermodynamic phase stability largely depends on the kind of structure, type of bonding, and size of the cations present. So, according to our results, the thermodynamic phase stability follows the order Na 4 Mn 3 (PO 4 ) 2 P 2 O 7 > Na 4 Fe 3 (PO 4 ) 2 P 2 O 7 > Na 4 Co 3 (PO 4 ) 2 P 2 O 7 > Na 4 Ni 3 (PO 4 ) 2 P 2 O 7 . The thermodynamic studies serve as guidelines for the selection of compositions with the potential for fabricating advanced cathode materials with maximum performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrochemical Processes Breaking Strict Phase Electroneutrality in Microemulsions

Phase electroneutrality is a near-omnipresent assumption in electrochemical reactions. Even media such as biphasic oil-water interfaces and kinetically stable emulsions follow this “rule.” This implies all electron transfer reactions must be accompanied by ion transfer to maintain charge balance within a phase. However, due to the small domain size, electroneutrality is known to break down in the electric double layer adjacent to the electrode. Therefore, the appropriateness of the electroneutrality approximation for media with nanoscale domains, such as microemulsions, is questionable. Here, in this work, we show definitively, for the first time, that phase electroneutrality can be violated during an electron transfer reaction in microemulsions. Cyclic voltammograms show that electrochemical oxidation of rubrene is possible in microemulsions when sodium hydroxide is the only supporting electrolyte. Rubrene is a hydrophobic redox compound that is insoluble in water in neutral and radical cation forms, and hydroxide anions are too hydrophilic to transfer to the oil (toluene) phase. Contrary to observations made in emulsion systems, rubrene oxidation in microemulsions seemingly occurs by a mechanism where coupled ion transfer required for rigorous phase electroneutrality is negated. Our results demonstrate that electron transfer reactions within nanometer-sized domains are not subject to restrictions that govern systems with larger domains.

Barth, Brian A. [Univ. of Tennessee, Knoxville, TN↗
DOE OSTI2022

Insights into Ti doping for stabilizing the Na 2/3 Fe 1/3 Mn 2/3 O 2 cathode in sodium ion battery

Iron- and manganese-based layered metal oxides, as cathodes for sodium ion batteries, have received widespread attention because of the low cost and high specific capacity. However, the Jahn-teller effect of Mn 3+ ions and the resulted unstable structure usually lead to continuously capacity decay. Herein, Titanium (Ti) has been successfully doped into Na 2/3 Fe 1/3 Mn 2/3 O 2 to suppress the Jahn-Teller distortion and improve both cycling and rate performance of sodium ion batteries. In situ high-energy synchrotron X-ray diffraction study shows that Ti-doped compound (Na 2/3 Fe 1/3 Mn 0.57 Ti 0.1 O 2 ) can maintain the single P2 phase without any phase transition during the whole charging/discharging process. Further, various electrochemical characterizations are also applied to explore the better kinetics of sodium ions transfer in the Na 2/3 Fe 1/3 Mn 0.57 Ti 0.1 O 2 . This work provides a comprehensive insight into the Ti-doping effects on the performance from both structural and electrokinetic perspectives.

25 ENERGY STORAGE↗
DOE OSTI2020

Electrochemical cells for direct oxide reduction, and related methods

A method of direct oxide reduction includes forming a molten salt electrolyte in an electrochemical cell, disposing at least one metal oxide in the electrochemical cell, disposing a counter electrode comprising a material selected from the group consisting of osmium, ruthenium, rhodium, iridium, palladium, platinum, silver, gold, lithium iridate, lithium ruthenate, a lithium rhodate, a lithium tin oxygen compound, a lithium manganese compound, strontium ruthenium ternary compounds, calcium iridate, strontium iridate, calcium platinate, strontium platinate, magnesium ruthenate, magnesium iridate, sodium ruthenate, sodium iridate, potassium iridate, and potassium ruthenate in the electrochemical cell, and applying a current between the counter electrode and the at least one metal oxide to reduce the at least one metal oxide. Related methods of direct oxide reduction and related electrochemical cells are also disclosed.

Tripathy, Prabhat K.↗
DOE OSTI2022

Improved precision in As speciation analysis with HERFD-XANES at the As K -edge: the case of As speciation in mine waste

High-energy-resolution fluorescence-detected (HERFD) X-ray absorption near-edge spectroscopy (XANES) is a spectroscopic method that allows for increased spectral feature resolution, and greater selectivity to decrease complex matrix effects compared with conventional XANES. XANES is an ideal tool for speciation of elements in solid-phase environmental samples. Accurate speciation of As in mine waste materials is important for understanding the mobility and toxicity of As in near-surface environments. In this study, linear combination fitting (LCF) was performed on synthetic spectra generated from mixtures of eight measured reference compounds for both HERFD-XANES and transmission-detected XANES to evaluate the improvement in quantitative speciation with HERFD-XANES spectra. The reference compounds arsenolite (As 2 O 3 ), orpiment (As 2 S 3 ), getchellite (AsSbS 3 ), arsenopyrite (FeAsS), kaňkite (FeAsO 4 ·3.5H 2 O), scorodite (FeAsO 4 ·2H 2 O), sodium arsenate (Na 3 AsO 4 ), and realgar (As 4 S 4 ) were selected for their importance in mine waste systems. Statistical methods of principal component analysis and target transformation were employed to determine whether HERFD improves identification of the components in a dataset of mixtures of reference compounds. LCF was performed on HERFD- and total fluorescence yield (TFY)-XANES spectra collected from mine waste samples. Arsenopyrite, arsenolite, orpiment, and sodium arsenate were more accurately identified in the synthetic HERFD-XANES spectra compared with the transmission-XANES spectra. In mine waste samples containing arsenopyrite and either scorodite or kaňkite, LCF with HERFD-XANES measurements resulted in fits with smaller R -factors than concurrently collected TFY measurements. The improved accuracy of HERFD-XANES analysis may provide enhanced delineation of As phases controlling biogeochemical reactions in mine wastes, contaminated soils, and remediation systems.

58 GEOSCIENCES↗
DOE OSTI2023

Topology driven and soft phonon mode enabled Na-ion diffusion in quaternary chalcogenides, Na 3 ZnGaX 4 (X = S, and Se)

The compounds Na 3 ZnGaX 4 (X = S, Se) are potential solid electrolyte materials in sodium-based batteries, which have certain advantages over oxide materials and have shown significant ionic conductivity at ambient temperature. In this paper, we bring out atomic-level features of the diffusion process in these new materials using the microscopic techniques of inelastic neutron scattering (INS), quasielastic neutron scattering (QENS), and ab initio molecular dynamics (AIMD) simulations. The insights obtained from these techniques are unique and not available from other macroscopic experiments. Neutron scattering experiments have been performed at temperatures from 100 to 700 K. The simulations have been carried out up to 900 K. We have calculated the phonon spectra and the space–time correlation functions and found good agreement with the results of the neutron scattering experiments. The simulations enable detailed analysis of the atomic-site dependent dynamical information. We observe low-energy phonon modes of ~6 meV involving the vibrations of certain Na atoms in the lattice. This reveals that the Na at 32g Wyckoff sites (Na2) has sufficiently shallow potential among the two available crystallographic sites. This shallow potential facilitates diffusion. Furthermore, the specific structural topology of the network of interconnected zig-zag chains of the Na2 atomic sites provides the low-barrier energy pathways for diffusion. A small fraction of vacancy defects appears essential for diffusion. We further observe that the Na2 atoms undergo jump-like diffusion to the vacant next or the 2nd next neighbour sites at ~4 Å. While the QENS experiments reveal the jump-like diffusion and its time scale, detailed analysis of the AIMD simulations shows that the jumps appear mostly along zig-zag chains of the Na2 sites in the tetragonal ab-plane, as well as between the chains along the c-axis. In conclusion, the net diffusion is essentially 3-dimensional, with little anisotropy despite the anisotropy of the tetragonal crystal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A Review of Tank 48H Treatment of Tetraphenylborate with Permanganate

Tank 48H contains roughly 270,000 gallons of radioactive waste material. The waste stored in this tank was to be processed in multiple stages utilizing facilities at the Savannah River Site (SRS) almost 30 years ago. The In-Tank Precipitation Process (ITP) was initiated in Tank 48H, which precipitated highly radioactive cesium-137 using sodium tetraphenylborate (NaTPB). While the process succeeded in precipitating the Cs, Sr, and other actinides, it also generated an unexpectedly large amount of benzene. The evolved benzene created a safety concern and made the waste incompatible with further downstream processing. This halted the ITP, and a new method of treatment was required to continue processing the legacy waste contained in Tank 48H. A myriad of treatment options have been proposed with multiple teams of researchers assembled to work on this highly complex issue over the last few decades. This review investigated one potentially viable treatment option, in-tank oxidation with sodium permanganate. Permanganate has been well known in literature as a strong oxidizing agent for organic compounds, as well as being utilized at the Savannah River Site (SRS) in other processes. A small number of studies have been conducted utilizing waste simulants to evaluate the use of permanganate as an oxidant for tetraphenylborate (TPB). A search of the literature and data from these studies indicates that permanganate could be a viable treatment for destruction of TPB in Tank 48H. While the scoping studies had a small number of individual experiments and nonideal conditions, the permanganate decomposed up to 90% of the TPB. A free hydroxide concentration above 1.0 M is required for tank corrosion control. Simulant studies indicate no decrease in TPB decomposition by permanganate until pH 14. The simulant studies show an increase in TPB decomposition as the temperature of the solution is increased to 40 °C. The post-reaction analysis of previous simulant tests did not look at all of the organic degradation products. Investigations into what these organic products are and in what quantity will help guide determinations as to whether the downstream processing facilities are able to handle the material that will be generated. Study on the time frame for the reaction between permanganate and TPB should be investigated as the literature reports only extend out to two weeks reaction time. The permanganate treatment conditions indicate no corrosion control concerns and a longer timescale reaction may be needed for in-tank treatment. In addition, further study would be useful to identify a lower boundary condition for the ratio of TPB and oxidant. The simulant tests applied large excesses of permanganate, and this may be unnecessary. The size constraint of the tank means that there will be practical limitations on the amount of sodium permanganate that can be added to the tank. The amount of permanganate should be minimized as much as possible while still ensuring decomposition of the TPB to minimize the amount of manganese dioxide solids generated.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Copper Tantalate by a Sodium-Driven Flux-Mediated Synthesis for Photoelectrochemical CO 2 Reduction

Copper-tantalate, Cu 2 Ta 4 O 11 (CTO), shows significant promise as an efficient photocathode for multi-carbon compounds (C 2+ ) production through photoelectrochemical (PEC) CO 2 reduction, owing to its suitable energy bands and catalytic surface. However, synthesizing CTO poses a significant challenge due to its metastable nature and thermal instability. In this study, this challenge is addressed by employing a flux-mediated synthesis technique using a sodium-based flux to create sodium-doped CTO (Na-CTO) thin films, providing enhanced nucleation and stabilization for the CTO phase. To evaluate the PEC performance and catalytic properties of the films, copper(II) oxide (CuO) at the Na-CTO surface is selectively etched. The etched Na-CTO shows a lower dark current, with decreased contribution from photocorrosion, unlike the non-etched Na-CTO which has remaining CuO on the surface. Furthermore, Na-CTO exhibits 7.3-fold ethylene selectivity over hydrogen, thus highlighting its promising potential as a photocathode for C 2+ production through PEC CO 2 reduction.

copper tantalate↗
DOE OSTI2023

Isatin derivative redoxmer for electrochemical device

An electrochemical device includes a compound that is an isatin derivative. The electrochemical device may be a lithium ion battery, a sodium ion battery, or a redox flow battery, and the isatin derivative may be a bipolar redox active material.

Bheemireddy, Sambasiva Reddy↗
DOE OSTI1961

Laboratory Development of a Pot Calcination Process for Converting Liquid Wastes to Solids

Simulated Darex, Purex, Thorex, and TBP-25 wastes were batch-evaporated and calcined to solids. The weight of residue was decreased to ~ 8% of the original waste for Darex, to ~ 4% for Purex, to ~ 2% for Thorex, and ~ 7% for TBP-25 by calcination to 1200°C. Semicontinuous evaporation and calcination to solids at 900°C of Darex and Purex wastes gave volume reduction factors of ~ 8 and 7 to 10, respectively. The nitrate contents of the residues from batch calcination to 800°C were from ~ 0.07 to 0.5 wt % while the nitrate contents of the residues from semicontinuous calcination to 900°C were from ~ 0.1 to 0.7 wt %. Sodium, calcium, and magnesium additives to Purex waste decreased the percent of sulfate volatilized into the condensate from ~ 30% to <0.5%. Replacement of the atmosphere above the waste with nitric oxide decreased ruthenium volatility from 50 to 60% of that originally present in Purex waste to 0.5 to 3.5%. The thermal conductivities for the calcined wastes, measured in situ, were all >0.1 Btu/hr ft °F at ~ 400°F and increased almost linearly with increasing temperature to >0.3 Btu/hr ft °F at ~ 1600°F in all cases studied.

052001* -- Nuclear Fuels-- Waste Processing↗
DOE OSTI2022

Direct Air Capture and Sequestration of CO 2 by Accelerated Indirect Aqueous Mineral Carbonation under Ambient Conditions

Mineralization of gaseous carbon dioxide into solid carbonates using alkaline industrial residues such as coal fly ash has a dual advantage of reducing the carbon dioxide footprint of coal power plants and improving ash utilization. However, the slow mineral carbonation rate under atmospheric conditions is a major challenge, especially when using natural minerals or industrial residues for direct air capture (DAC) of CO 2 . In this study, using coal fly ash samples and concentrated alkali carbonate aqueous solutions as a recyclable solvent, we show the feasibility of coupling mineral carbonation with DAC under atmospheric conditions. Findings show that carbonation efficiency is best under alkaline conditions, achieving as high as ~80% conversion to calcium carbonates within 1 h in a 1.9 M sodium carbonate solution. Based on the experimental results, a process coupling DAC and mineral carbonation that operates entirely under ambient conditions is proposed. Here, the techno-economic and life cycle assessments for the proposed process project a levelized cost of $\$116$–133/t-CO 2 -sequestered (US $\$2019$) and process carbon emissions (GWP) in the range of 0.03–0.25 t-CO 2 e/t-CO 2 -sequestered. Considering the low cost, simplicity, and gigaton-scale sequestration potential, we believe that DAC based on alkaline industrial residue carbonation can be considered a “low-hanging fruit” in the pursuit of negative emissions to combat climate change.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Sodium Rich Vanadium Oxy‐Fluorophosphate – Na 3.2 Ni 0.2 V 1.8 (PO 4 ) 2 F 2 O – as Advanced Cathode for Sodium Ion Batteries

Abstract Conventional sodium‐based layered oxide cathodes are extremely air sensitive and possess poor electrochemical performance along with safety concerns when operating at high voltage. The polyanion phosphate, Na 3 V 2 (PO 4 ) 3 stands out as an excellent candidate due to its high nominal voltage, ambient air stability, and long cycle life. The caveat is that Na 3 V 2 (PO 4 ) 3 can only exhibit reversible capacities in the range of 100 mAh g −1 , 20% below its theoretical capacity. Here, the synthesis and characterizations are reported for the first time of the sodium‐rich vanadium oxyfluorophosphate, Na 3.2 Ni 0.2 V 1.8 (PO 4 ) 2 F 2 O, a tailored derivative compound of Na 3 V 2 (PO 4 ) 3 , with extensive electrochemical and structural analyses. Na 3.2 Ni 0.2 V 1.8 (PO 4 ) 2 F 2 O delivers an initial reversible capacity of 117 mAh g −1 between 2.5 and 4.5 V under the 1C rate at room temperature, with 85% capacity retention after 900 cycles. The cycling stability is further improved when the material is cycled at 50 °C within 2.8–4.3 V for 100 cycles. When paired with a presodiated hard carbon, Na 3.2 Ni 0.2 V 1.8 (PO 4 ) 2 F 2 O cycled with a capacity retention of 85% after 500 cycles. Cosubstitution of the transition metal and fluorine in Na 3.2 Ni 0.2 V 1.8 (PO 4 ) 2 F 2 O as well as the sodium‐rich structure are the major factors behind the improvement of specific capacity and cycling stability, which paves the way for this cathode in sodium‐ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Multifunctional Effect of Fe Substitution in Na Layered Cathode Materials for Enhanced Storage Stability

In this study, developing stable cathode materials that are resistant to storage degradation is essential for practical development and industrial processing of Na-ion batteries, as many sodium layered oxide materials are susceptible to hygroscopicity and instability when exposed to ambient air. Among the various layered compounds, Fe-substituted O 3 -type Na(Ni 1/2 Mn 1/2 ) 1-x Fe x O 2 materials have emerged as a promising option for high-performance and low-cost cathodes. While previous reports have noted the decent air-storage stability of these materials, the role and origin of Fe substitution in improving storage stability remain unclear. In this study, we investigate the air resistant effect of Fe substitution in O 3 -Na(Ni 1/2 Mn 1/2 ) 1-x Fe x O 2 cathode materials by performing systematic surface and structural characterizations. We find that the improved storage stability can be attributed to the multifunctional effect of Fe substitution, which forms a surface protective layer containing an Fe-incorporated spinel phase and decreases the thermodynamical driving force for bulk chemical sodium extraction. With these mechanisms, the Fe-containing cathodes can suppress the cascades of cathode degradation processes and better retain the electrochemical performance after air storage.

25 ENERGY STORAGE↗
DOE OSTI2025

Tank 48H Phase 1 Initial Testing Using Sodium Permanganate to Decompose Tetraphenylborate: Simulant Studies with Shaker Oven and 2-L Vessel

Tank 48H currently holds legacy material including organic tetraphenylborate (TPB) compounds from the operation of the In-Tank Precipitation process. The large quantity of TPB is not compatible with the waste treatment facilities at SRS and must be removed or undergo treatment to oxidize the organic compounds before the tank can be returned to routine Tank Farm service. Tank 48H currently holds approximately 270,000 gallons of legacy material comprised of decontaminated salt solution, approximately 20,000 kilograms of TPB solids, 3,400 kilograms of sludge solids, and 1,800 kilograms of monosodium titanate (MST).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Crystalline Organic Compounds as Effective Nuclei in Contact Efflorescence of Ammonium Sulfate

Contact nucleation is believed to play a role in liquid-to-solid phase transitions in the atmosphere including ice nucleation and salt efflorescence. Here, for this work, contact efflorescence of optically levitated ammonium sulfate droplets by collisions with organic particles is probed using a long working-distance optical trap. Two highly viscous water-soluble organic compounds (d-(+)-raffinose and citric acid), and two insoluble highly surface-active organic compounds (stearic acid and cis-pinonic acid) were probed for their ability to induce efflorescence upon contact. While three of the organics showed minimal effectiveness as contact nuclei, cis-pinonic acid showed a remarkable ability to initiate contact efflorescence of ammonium sulfate, occurring near ammonium sulfate’s deliquescence relative humidity. Further analysis of cis-pinonic acid using bright-field microscopy in an electrodynamic balance provided evidence that the cis-pinonic acid particles are crystalline under the laboratory conditions. We suggest that the close lattice match between crystalline ammonium sulfate and crystalline cis-pinonic acid may account for the observed effectiveness in initiating contact efflorescence of ammonium sulfate. In contrast, tests of contact nucleation between cis-pinonic acid and sodium chloride, a pair with a poor lattice match, did not result in efflorescence. These findings suggest that crystalline organic compounds in the atmosphere could act as effective nuclei for contact efflorescence of atmospherically relevant salts, provided they share a compatible lattice structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Untargeted metabolomics reveals anion and organ‐specific metabolic responses of salinity tolerance in willow

SUMMARY Willows can alleviate soil salinisation while generating sustainable feedstock for biorefinery, yet the metabolomic adaptations underlying their tolerance remain poorly understood.Salix miyabeanawas treated with two environmentally abundant salts, NaCl and Na 2 SO 4 , in a 12‐week pot trial. Willows tolerated salts across all treatments (up to 9.1 dS m −1 soil EC e ), maintaining biomass while selectively partitioning ions, confining Na + to roots and accumulating Cl − and in the canopy and adapting to osmotic stress via reduced stomatal conductance. Untargeted metabolomics captured >5000 putative compounds, including 278 core willow metabolome compounds constitutively produced across organs. Across all treatments, salinity drove widespread metabolic reprogramming, altering 28% of the overall metabolome, with organ‐tailored strategies. Comparing salt forms at equimolar sodium, shared differentially abundant metabolites were limited to 3% of the metabolome, representing the generalised salinity response, predominantly in roots. Anion‐specific metabolomic responses were extensive. NaCl reduced carbohydrates and tricarboxylic acid cycle intermediates, suggesting potential carbon and energy resource pressure, and accumulated root structuring compounds, antioxidant flavonoids, and fatty acids. Na 2 SO 4 salinity triggered accumulation of sulphur‐containing larger peptides, suggesting excess sulphate incorporation leverages ion toxicity to produce specialised salt‐tolerance‐associated metabolites. This high‐depth picture of the willow metabolome underscores the importance of capturing plant adaptations to salt stress at organ scale and considering ion‐specific contributions to soil salinity.

Plant Sciences↗
DOE OSTI2026

Novel insight into the kinetics of amide bond glycolysis for nylon-6 depolymerization

Chemical recycling of nylon-6 to short-chain oligomers and monomer ε-caprolactam via catalytic glycolysis is a potential solution for plastic waste remediation. Here, in this work, the kinetics of amide bond glycolysis (with ethylene glycol) in nylon-6 and the model compound N-phenethyl-3-phenylpropanamide (M1) were evaluated at 473 K in the presence of the cyclic amidine catalyst 1,5,7-triazabicyclo[4.4.0]dec-5-ene. Rates of polymer glycolysis were determined by the time-dependent shift in molecular weight distribution, whereas rates of M1 glycolysis were determined using liquid chromatography. The similarity of the first-order rate constants for glycolysis of nylon-6 and M1 at 473 K with 0.03 M amidine catalyst (5 mol% relative to amide bonds), 1.22 × 10 −5 s −1 and 2.18 × 10 −5 s −1 , respectively, confirmed the suitability of M1 as a model compound for nylon-6 glycolysis. Similar rates of glycolysis in the presence of other cyclic amidine catalysts as well as sodium methoxide revealed little influence of base strength. Glycolysis rates were unexpectedly non-linear in catalyst loading and deactivation occurred with long reaction times, presumably by non-selective decomposition of products as detected by liquid chromatography.

Depolymerization rate and rate constant↗