Search NASA⌕ Search

SEARCH · Search NASA

Results for “SOIL MOISTURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Lower soil moisture and deep soil temperatures in thermokarst features increase old soil carbon loss after 10 years of experimental permafrost warming

Almost half of the global terrestrial soil carbon (C) is stored in the northern circumpolar permafrost region, where air temperatures are increasing two times faster than the global average. As climate warms, permafrost thaws and soil organic matter becomes vulnerable to greater microbial decomposition. Long-term soil warming of ice-rich permafrost can result in thermokarst formation that creates variability in environmental conditions. Consequently, plant and microbial proportional contributions to ecosystem respiration may change in response to long-term soil warming. Natural abundance δ 13 C and Δ 14 C of aboveground and belowground plant material, and of young and old soil respiration were used to inform a mixing model to partition the contribution of each source to ecosystem respiration fluxes. We employed a hierarchical Bayesian approach that incorporated gross primary productivity and environmental drivers to constrain source contributions. We found that long-term experimental permafrost warming introduced a soil hydrology component that interacted with temperature to affect old soil C respiration. Old soil C loss was suppressed in plots with warmer deep soil temperatures because they tended to be wetter. When soil volumetric water content significantly decreased in 2018 relative to 2016 and 2017, the dominant respiration sources shifted from plant aboveground and young soil respiration to old soil respiration. The proportion of ecosystem respiration from old soil C accounted for up to 39% of ecosystem respiration and represented a 30-fold increase compared to the wet-year average. Our findings show that thermokarst formation may act to moderate microbial decomposition of old soil C when soil is highly saturated. However, when soil moisture decreases, a higher proportion of old soil C is vulnerable to decomposition and can become a large flux to the atmosphere. Furthermore, as permafrost systems continue to change with climate, we must understand the thresholds that may propel these systems from a C sink to a source.

permafrost↗

Converting Soil Moisture Observations to Effective Values for Improved Validation of Remotely Sensed Soil Moisture

We compare soil moisture retrieved with an inverse algorithm with observations of mean moisture in the 0-6 cm soil layer. A significant discrepancy is noted between the retrieved and observed moisture. Using emitting depth functions as weighting functions to convert the observed mean moisture to observed effective moisture removes nearly one-half of the discrepancy noted. This result has important implications in remote sensing validation studies.

Laymon, Charles A.↗

SMOS/SMAP Synergy for SMAP Level 2 Soil Moisture Algorithm Evaluation

Soil Moisture Active Passive (SMAP) satellite has been proposed to provide global measurements of soil moisture and land freeze/thaw state at 10 km and 3 km resolutions, respectively. SMAP would also provide a radiometer-only soil moisture product at 40-km spatial resolution. This product and the supporting brightness temperature observations are common to both SMAP and European Space Agency's Soil Moisture and Ocean Salinity (SMOS) mission. As a result, there are opportunities for synergies between the two missions. These include exploiting the data for calibration and validation and establishing longer term L-band brightness temperature and derived soil moisture products. In this investigation we will be using SMOS brightness temperature, ancillary data, and soil moisture products to develop and evaluate a candidate SMAP L2 passive soil moisture retrieval algorithm. This work will begin with evaluations based on the SMOS product grids and ancillary data sets and transition to those that will be used by SMAP. An important step in this analysis is reprocessing the multiple incidence angle observations provided by SMOS to a global brightness temperature product that simulates the constant 40 degree incidence angle observations that SMAP will provide. The reprocessed brightness temperature data provide a basis for evaluating different SMAP algorithm alternatives. Several algorithms are being considered for the SMAP radiometer-only soil moisture retrieval. In this first phase, we utilized only the Single Channel Algorithm (SCA), which is based on the radiative transfer equation and uses the channel that is most sensitive to soil moisture (H-pol). Brightness temperature is corrected sequentially for the effects of temperature, vegetation, roughness (dynamic ancillary data sets) and soil texture (static ancillary data set). European Centre for Medium-Range Weather Forecasts (ECMWF) estimates of soil temperature for the top layer (as provided as part of the SMOS ancillary data) were used to correct for surface temperature effects and to derive microwave emissivity. ECMWF data were also used for precipitation forecasts, presence of snow, and frozen ground. Vegetation options are described below. One year of soil moisture observations from a set of four watersheds in the U.S. were used to evaluate four different retrieval methodologies: (1) SMOS soil moisture estimates (version 400), (2) SeA soil moisture estimates using the SMOS/SMAP data with SMOS estimated vegetation optical depth, which is part of the SMOS level 2 product, (3) SeA soil moisture estimates using the SMOS/SMAP data and the MODIS-based vegetation climatology data, and (4) SeA soil moisture estimates using the SMOS/SMAP data and actual MODIS observations. The use of SMOS real-world global microwave observations and the analyses described here will help in the development and selection of different land surface parameters and ancillary observations needed for the SMAP soil moisture algorithms. These investigations will greatly improve the quality and reliability of this SMAP product at launch.

Bindlish, Rajat↗

Soil Moisture Active Passive (SMAP) Mission Level 4 Surface and Root Zone Soil Moisture (L4_SM) Product Specification Document

This is the Product Specification Document (PSD) for Level 4 Surface and Root Zone Soil Moisture (L4_SM) data for the Science Data System (SDS) of the Soil Moisture Active Passive (SMAP) project. The L4_SM data product provides estimates of land surface conditions based on the assimilation of SMAP observations into a customized version of the NASA Goddard Earth Observing System, Version 5 (GEOS-5) land data assimilation system (LDAS). This document applies to any standard L4_SM data product generated by the SMAP Project.

Soil Moisture↗

Global Assimilation of L-Band Brightness Temperature Observations from SMAP and SMOS into the Catchment Land Surface Model and Contribution to the Skill of Soil Moisture Estimates

The Soil Moisture Active Passive (SMAP) and Soil Moisture Ocean Salinity (SMOS) missions provide global observations of L-band (1.4 GHz) passive microwave brightness temperature (Tb) observations at a resolution of ~40 km every 2-3 days. These observations have been available since 2015 from SMAP and since 2010 from SMOS.Soil moisture estimates from the separate assimilation of SMAP and SMOS Tb observations into land surface models were previously shown to improve over model-only estimates, thereby demonstrating the value of assimilating L-band Tb observations for soil moisture estimation. The assimilation experiments documented in the literature do not, however, establish whether the joint assimilation of SMAP and SMOS Tbs improves the skill of the resulting soil moisture estimates beyond what can be achieved with either set of observations alone. Moreover, because the published SMAP and SMOS results used different assimilation systems and configurations and applied different evaluation data and procedures, it is unclear whether the assimilation of SMAP-only or SMOS-only Tbs results in better soil moisture skill. In this presentation, we compare the results of three separate assimilation experiments for the period from April 2015 to present. The experiments utilize the SMAP Level-4 Soil Moisture (L4_SM) algorithm, which assimilates L-band Tb observations into the NASA Catchment land surface model using a spatially distributed ensemble Kalman filter. Specifically, the three experiments presented here assimilate (i) SMAP Tbs only, as in the L4_SM product, (ii) SMOS Tbs only, after interpolation of 40° incidence angle, and (iii) both SMAP and SMOS Tbs. In all other respects, the configuration of three experiments is identical, as is the validation of the output. Preliminary results suggest that the joint assimilation of SMAP and SMOS Tbs yields the most skillful soil moisture estimates when compared to independent in situ measurements. Moreover, the skill of the SMAP-only assimilation exceeds that of the SMOS-only assimilation. The presentation provides an in-depth evaluation of the skill of the assimilation estimates vs. independent in situ and satellite measurements and in terms of statistics of the observation-minus-forecast residuals and analysis increments.

Reichle, Rolf↗

Application of Multitemporal Remotely Sensed Soil Moisture for the Estimation of Soil Physical Properties

This paper demonstrates the use of multitemporal soil moisture derived from microwave remote sensing to estimate soil physical properties. The passive microwave ESTAR instrument was employed during June 10-18, 1992, to obtain brightness temperature (TB) and surface soil moisture data in the Little Washita watershed, Oklahoma. Analyses of spatial and temporal variations of TB and soil moisture during the dry-down period revealed a direct relationship between changes in T and soil moisture and soil physical (viz. texture) and hydraulic (viz. saturated hydraulic conductivity, K(sat)) properties. Statistically significant regression relationships were developed for the ratio of percent sand to percent clay (RSC) and K(sat), in terms of change components of TB and surface soil moisture. Validation of results using field measured values and soil texture map indicated that both RSC and K(sat) can be estimated with reasonable accuracy. These findings have potential applications of microwave remote sensing to obtain quick estimates of the spatial distributions of K(sat), over large areas for input parameterization of hydrologic models.

Mattikalli, N. M.↗

Using Data Assimilation Diagnostics to Assess the SMAP Level-4 Soil Moisture Product

The Soil Moisture Active Passive (SMAP) mission Level-4 Soil Moisture (L4_SM) product provides 3-hourly, 9-km resolution, global estimates of surface (0-5 cm) and root-zone (0-100 cm) soil moisture and related land surface variables from 31 March 2015 to present with approx.2.5-day latency. The ensemble-based L4_SM algorithm assimilates SMAP brightness temperature (Tb) observations into the Catchment land surface model. This study describes the spatially distributed L4_SM analysis and assesses the observation-minus-forecast (O-F) Tb residuals and the soil moisture and temperature analysis increments. Owing to the climatological rescaling of the Tb observations prior to assimilation, the analysis is essentially unbiased, with global mean values of approx. 0.37 K for the O-F Tb residuals and practically zero for the soil moisture and temperature increments. There are, however, modest regional (absolute) biases in the O-F residuals (under approx. 3 K), the soil moisture increments (under approx. 0.01 cu m/cu m), and the surface soil temperature increments (under approx. 1 K). Typical instantaneous values are approx. 6 K for O-F residuals, approx. 0.01 (approx. 0.003) cu m/cu m for surface (root-zone) soil moisture increments, and approx. 0.6 K for surface soil temperature increments. The O-F diagnostics indicate that the actual errors in the system are overestimated in deserts and densely vegetated regions and underestimated in agricultural regions and transition zones between dry and wet climates. The O-F auto-correlations suggest that the SMAP observations are used efficiently in western North America, the Sahel, and Australia, but not in many forested regions and the high northern latitudes. A case study in Australia demonstrates that assimilating SMAP observations successfully corrects short-term errors in the L4_SM rainfall forcing.

SMAP↗

An Overview of Production and Validation of the SMAP Passive Soil Moisture Product

The Soil Moisture Active Passive (SMAP) mission is an L-band mission scheduled for launch in Jan. 2015. The SMAP instruments consist of a radar and a radiometer to obtain complementary information from space for soil moisture and freeze/thaw state research and applications. By utilizing novel designs in antenna construction, retrieval algorithms, and acquisition hardware, SMAP provides a capability for global mapping of soil moisture and freeze/thaw state with unprecedented accuracy, resolution, and coverage. This improvement in hydrosphere state measurement is expected to advance our understanding of the processes that link the terrestrial water, energy and carbon cycles, improve our capability in flood prediction and drought monitoring, and enhance our skills in weather and climate forecast. For swath-based soil moisture measurement, SMAP generates three operational geophysical data products: (1) the radiometer-only soil moisture product (L2_SM_P) posted at 36-kilometer resolution, (2) the radar-only soil moisture product (L2_SM_A) posted at 3-kilometers resolution, and (3) the radar-radiometer combined soil moisture product (L2_SM_AP) posted at 9-kilometers resolution. Each product draws on the strengths of the underlying sensor(s) and plays a unique role in hydroclimatological and hydrometeorological applications. A full suite of SMAP data products is given in Table 1.

passive microwave↗

Correlation of microwave sensor returns with soil moisture

Microwave sensor soil data were collected by aircraft over agricultural croplands. Multiple incident angle scatterometer data (13.3, 4.75, 1.6 and 0.4 GHz), passive radiometer data (L and C-band), and soil moisture ground truth measurements were collected coincidentally. Each sensor and angle of incidence was linearly analyzed against the measured soil moisture. For bare agricultural soils, the optimal single sensor for soil moisture preduction is the L-band passive radiometer. The effects of vegetation and differing surface roughness prove significant. When both bare and vegetated surfaces were studied, the masking due to the vegetation renders the single sensor approach ineffective in soil moisture prediction. Multisensor techniques are necessary to remotely measure soil moisture when a priori knowledge of vegetation is not available.

Taube, D. W.↗

Impact of a Merged Precipitation Data on Global Soil Moisture Variability

Accurate soil moisture information has proved to be important to climate simulations and climate and weather forecasts. However, many difficulties exist that limit our understanding of soil moisture distribution and variability. One of them is the lack of accurate precipitation with appropriate spatial and temporal resolution. Precipitation as an input forcing to the land surface greatly influences soil moisture characteristics and variability. To improve precipitation data quality, an algorithm has been developed to generate a spatially and temporally continuous 3-hourly global precipitation data for the period of 1987 to present. This precipitation product is a combination of the precipitation from Special Sensor Microwave Imager (SSMI) with the Goddard Earth Observing System-1 Data Assimilation System (GEOS-1 DAS) employing a Physical-space Statistical Analysis System (PSAS). In this study we investigate the impact of this merged/analyzed precipitation data on the global soil moisture variability using an Off-line Land-surface GEOS Assimilation (OLGA) system. Two OLGA integrations starting from 1987 to 1993 are performed forced with the analyzed and GEOS-1 DAS precipitation respectively. We examine the spatial and temporal characteristics of soil moisture variability in response to the analyzed precipitation. The influence of this merged precipitation on the soil moisture variability and regional hydrological budget is estimated throughout the comparison with the results forced with the GEOS-1 DAS precipitation only. In the OLGA the sut@-grid scale horizontal heterogeneity is explicitly represented on the tile space. This provides a means to assess the role of the surface moisture heterogeneity in the interaction with the surface atmosphere and surface hydrological budget, and to validate OLGA results at tile space with in situ observation. ABRACOS (Anglo-Brazilian Amazonian Climate Observation Study), FIFE (First ISLSCP Field Experiment) I and HAPEX data will be used in the validation.

Yang, Runhua↗

Differential Organic Carbon Mineralization Responses to Soil Moisture in Three Different Soil Orders Under Mixed Forested System: Supporting Data

This data contains data from 90-day long incubation study which aimed to look at the soil moisture-texture relationship on soil organic carbon (SOC) cycling. Soils were collected from three distinct soil textures from mixed forests in 2017: sandy (Georgia, 2017-05-01), loamy (Missouri, 2017-06-14) and clayey (Texas, December 2017) were incubated at different soil moisture levels (air-dried, 25% water holding capacity (WHC), 50% WHC, 100% WHC and 175% WHC) at room temperature for a period of 90 days. Files contain microbial respiration, active and slow SOC pools, and their respective mineralization rates, extractable organic carbon (C), and C-acquiring extracellular enzymes. Findings from these data were used in Singh et al. (2021). This study aimed to examine the interactive effect of soil moisture and texture on SOC mineralization. Soil samples of three distinct textures (sandy, loamy, and clayey) were collected from mixed forests of Georgia, Missouri, and Texas, respectively. Soil cores of 5 cm diameter were collected from numerous random locations at each site from 0-15 cm depth after scraping the litter layer and mixed thoroughly to obtain a composite sample per site. Three additional soil cores were collected to determine the WHC using pressure plate extractors. Soil samples were composited, and triplicate soil samples were incubated in mason jars for a period of 90 days at room temperature under different moisture regimes: air dried, 25% WHC, 50% WHC, at WHC and 100% saturation. Soil respiration was measured weekly, and destructive sampling was conducted at 1, 15, 60, and 90 days to determine extractable organic C, C acquiring enzyme activity, and active and slow SOC pools with their respective mineralization rates. The C acquiring enzyme activity was the total activity of α-glucosidase, β-glucosidase, cellobiohydrolase, and β-xylosidase enzymes. Gas samples for microbial respiration measurements were collected from headspace of incubation jars through the sampling ports on the lids and then analyzed using a Shimadzu Gas Chromatograph (GC-2014). Prior to sampling, the vials were evacuated. Blank correction was also done by collecting gas samples from empty incubation jars. Double pool exponential decay model was used in SigmaPlot to determine the active and slow SOC pools and their mineralization rates (Farrar et al., 2012; Jagadamma et al., 2014). The C-acquiring extracellular enzymes were measured using the microplate method by German et al., (2011). Microbial community structure was determined using the phospholipid fatty acid (PLFA) and neutral lipid fatty acid (NLFA) analyses (Buyer and Sasser, 2012). This dataset has seven data files provided in comma-separate (*.csv) format. Additional metadata are provided: seven data dictionaries and a file-level metadata file in comma separate (*.csv) format and a user guide in PDF (*.pdf) format.

Carbon acquiring enzyme activity↗

Utilization of active microwave roughness measurements to improve passive microwave soil moisture estimates over bare soils

Multisensor aircraft data were used to establish the potential of the active microwave sensor response to be used to compensate for roughness in the passive microwave sensor's response to soil moisture. Only bare fields were used. It is found that the L-band radiometer's capability to estimate soil moisture significantly improves when surface roughness is accounted for with the scatterometers.

Theis, S. W.↗

Utilization of active microwave roughness measurements to improve passive microwave soil moisture estimates over bare soils

Multisensor aircraft data were used to establish the potential of the active microwave sensor response to be used to compensate for roughness in the passive microwave sensor's response to soil moisture. Only bare fields were used. It is found that the L-band radiometer's capability to estimate soil moisture significantly improves when surface roughness is accounted for with the scatterometers.

Theis, S. W.↗

Developing a strategy for the national coordinated soil moisture monitoring network

Soil moisture is a critical land surface variable, affecting a wide variety of climatological, agricultural, and hydrological processes. Determining the current soil moisture status is possible via a variety of methods, including in situ monitoring, remote sensing, and numerical modeling. Although all of these approaches are rapidly evolving, there is no cohesive strategy or framework to integrate these diverse information sources to develop and disseminate coordinated national soil moisture products that will improve our ability to understand climate variability. The National Coordinated Soil Moisture Monitoring Network initiative has developed a national strategy for network coordination with NOAA's National Integrated Drought Information System. The strategy is currently in review within NOAA, and work is underway to implement the initial milestones of the strategy. This update reviews the goals and steps being taken to establish this national-scale coordination for soil moisture monitoring in the United States.

54 ENVIRONMENTAL SCIENCES↗

Developing a strategy for the national coordinated soil moisture monitoring network

Soil moisture is a critical land surface variable, affecting a wide variety of climatological, agricultural, and hydrological processes. Determining the current soil moisture status is possible via a variety of methods, including in situ monitoring, remote sensing, and numerical modeling. Although all of these approaches are rapidly evolving, there is no cohesive strategy or framework to integrate these diverse information sources to develop and disseminate coordinated national soil moisture products that will improve our ability to understand climate variability. The National Coordinated Soil Moisture Monitoring Network initiative has developed a national strategy for network coordination with NOAA's National Integrated Drought Information System. The strategy is currently in review within NOAA, and work is underway to implement the initial milestones of the strategy. This update reviews the goals and steps being taken to establish this national-scale coordination for soil moisture monitoring in the United States.

Michael H. Cosh↗

The benefit of brightness temperature assimilation for the SMAP Level-4 surface and root-zone soil moisture analysis

The Soil Moisture Active Passive (SMAP) Level-4 (L4) product provides global estimates of surface soil moisture (SSM) and root-zone soil moisture (RZSM) via the assimilation of SMAP brightness temperature (Tb) observations into the NASA Catchment Land Surface Model (CLSM). Here, using in situ measurements from 2474 sites in China, we evaluate the performance of soil moisture estimates from the L4 data assimilation (DA) system and from a baseline “open-loop” (OL) simulation of CLSM without Tb assimilation. Using random forest regression, the efficiency of the L4 DA system (i.e., the performance improvement in DA relative to OL) is attributed to eight control factors related to the CLSM as well as τ–ω radiative transfer model (RTM) components of the L4 system. Results show that the Spearman rank correlation (R) for L4 SSM with in situ measurements increases for 77 % of the in situ measurement locations (relative to that of OL), with an average R increase of approximately 14 % (ΔR=0.056). RZSM skill is improved for about 74 % of the in situ measurement locations, but the average R increase for RZSM is only 7 % (ΔR=0.034). Results further show that the SSM DA skill improvement is most strongly related to the difference between the RTM-simulated Tb and the SMAP Tb observation, followed by the error in precipitation forcing data and estimated microwave soil roughness parameter h. For the RZSM DA skill improvement, these three dominant control factors remain the same, although the importance of soil roughness exceeds that of the Tb simulation error, as the soil roughness strongly affects the ingestion of DA increments and further propagation to the subsurface. For the skill of the L4 and OL estimates themselves, the top two control factors are the precipitation error and the SSM–RZSM coupling strength error, both of which are related to the CLSM component of the L4 system. Finally, we find that the L4 system can effectively filter out errors in precipitation. Therefore, future development of the L4 system should focus on improving the characterization of the SSM–RZSM coupling strength.

Jianxiu Qiu↗

Inferring Land Surface Model Parameters for the Assimilation of Satellite-Based L-Band Brightness Temperature Observations into a Soil Moisture Analysis System

The Soil Moisture and Ocean Salinity (SMOS) satellite mission provides global measurements of L-band brightness temperatures at horizontal and vertical polarization and a variety of incidence angles that are sensitive to moisture and temperature conditions in the top few centimeters of the soil. These L-band observations can therefore be assimilated into a land surface model to obtain surface and root zone soil moisture estimates. As part of the observation operator, such an assimilation system requires a radiative transfer model (RTM) that converts geophysical fields (including soil moisture and soil temperature) into modeled L-band brightness temperatures. At the global scale, the RTM parameters and the climatological soil moisture conditions are still poorly known. Using look-up tables from the literature to estimate the RTM parameters usually results in modeled L-band brightness temperatures that are strongly biased against the SMOS observations, with biases varying regionally and seasonally. Such biases must be addressed within the land data assimilation system. In this presentation, the estimation of the RTM parameters is discussed for the NASA GEOS-5 land data assimilation system, which is based on the ensemble Kalman filter (EnKF) and the Catchment land surface model. In the GEOS-5 land data assimilation system, soil moisture and brightness temperature biases are addressed in three stages. First, the global soil properties and soil hydraulic parameters that are used in the Catchment model were revised to minimize the bias in the modeled soil moisture, as verified against available in situ soil moisture measurements. Second, key parameters of the "tau-omega" RTM were calibrated prior to data assimilation using an objective function that minimizes the climatological differences between the modeled L-band brightness temperatures and the corresponding SMOS observations. Calibrated parameters include soil roughness parameters, vegetation structure parameters, and the single scattering albedo. After this climatological calibration, the modeling system can provide L-band brightness temperatures with a global mean absolute bias of less than 10K against SMOS observations, across multiple incidence angles and for horizontal and vertical polarization. Third, seasonal and regional variations in the residual biases are addressed by estimating the vegetation optical depth through state augmentation during the assimilation of the L-band brightness temperatures. This strategy, tested here with SMOS data, is part of the baseline approach for the Level 4 Surface and Root Zone Soil Moisture data product from the planned Soil Moisture Active Passive (SMAP) satellite mission.

Reichle, Rolf H.↗

Multispectral determination of soil moisture-2

Soil moisture data obtained using scatterometers, modular multispectral scanners and passive microwave radiometers were revised and grouped into four field cover types for statistical anaysis. Guymon data are grouped as alfalfa, bare, milo with rows perpendicular to the field view, and milo viewed parallel to the field of view. Dalhart data are grouped as bare combo, stubble, disked stubble, and corn field. Summary graphs combine selected analyses to compare the effects of field cover. The analysis for each of the cover types is presented in tables and graphs. Other tables show elementary statistics, correlation matrices, and single variable regressions. Selected eigenvectors and factor analyses are included and the highest correlating sensor typs for each location are summarized.

Estes, J. E.↗