Search NASA⌕ Search

SEARCH · Search NASA

Results for “STARCH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Gelatin/Gelatinized Sago Starch Biomembranes as a Drug Delivery System Using Rubber Latex as Plasticizer

Preparation and properties of gelatin and gelatin/gelatinized sago starch biomembranes as a drug delivery system are presented. Deproteinized natural rubber latex (DNRL) was chosen to blend as a plasticizer in biomembranes due to its elasticity. The opaque biomembranes were formed, and the effect of DNRL amounts (10–50 part per hundred of gelatin; phg) on mechanical properties of biomembranes was investigated. It was discovered that increasing the amounts of DNRL could decrease the brittleness of biomembranes. However, these DNRL blended biomembranes still swelled, dissolved in water, and eroded within 2 h. The 50 phg DNRL was further chosen for biomembrane preparations. Then, the 5–30 phg gelatinized sago starch which was prepared in-house was added. These gelatin/gelatinized sago starch biomembranes were homogenous and opaque. They portrayed good water uptake properties, and the highest values occurred in 20–30 min, then these biomembranes eroded slowly. Increasing the amounts of sago starch in biomembranes raised the water uptake rates but reduced the erosion properties. Biomembranes with and without starch blends showed the same tensile strengths. Their elongations at break increased when the amounts of starch were raised but still were lower than that of gelatin/DNRL biomembranes. The morphology, scanning electron microscopy, atomic force electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimeter, and X-ray diffractometer confirmed the compatibility of ingredients in biomembranes. Lidocaine and its hydrochloride salt were successfully incorporated in these biomembranes with good properties. The drug release and permeation of biomembrane showed good drug controlled release and were able to permeate through the pig skin.

36 MATERIALS SCIENCE↗

Constrained Mixture Design to Optimize Formulation and Performance of Foams Based on Cassava Starch and Peanut Skin

Foams composed of cassava starch, peanut skin, and glycerol were developed by thermal expansion process. A constrained mixture design was applied to evaluate the effect of components on flexural mechanical properties and water absorption capacity (WAC). The interaction between cassava starch and peanut skin exhibited a significant antagonistic effect in WAC. Effects of the concentration of cassava starch, glycerol and the interactions between cassava starch–glycerol and peanut skin–glycerol were significant to mechanical properties. Desirability function was applied to optimize the formulation in order to obtain less hydrophilic, more flexible and more resistant foams. Optimized formulation consisted of 23.71% (w/w) peanut skin and 12.68% (w/w) glycerol, based on solids content (cassava starch + peanut skin). Optimized foam showed experimental values similar to those predicted, validating the fitted models for defined constraints. This foam showed an important improvement in hydrophilicity indicated by a decrease in WAC, compared to cassava starch-based foams without peanut skin.

36 MATERIALS SCIENCE↗

Supermolecular structures of recrystallized starches with amylopectin side chains modified by amylosucrase to different chain lengths

Understanding the supermolecular structures of recrystallized starches is imperative to manufacture novel starches with controllable physicochemical properties enabling novel applications. In this study, native amylopectin (AP) from maize was modified to different chain lengths using amylosucrase from Neisseria polysaccharea. Native AP granules showed well-organized lamellar structures with a periodicity of ca. 9.0 nm whereas modified starches formed heterogeneous structures with the average crystallite size ranging from 19.77 to 29.88 nm. Acidic treatments eroded amorphous domains in both native AP granules and modified starch particles, producing nanocrystals composed of double helices. A-type nanocrystals (~40 nm) from native AP granules showed quadrangular shape with an acute angle of ca. 60°, while irregular B-type nanocrystals were observed for the modified starches. Molecular characterizations suggested that the nanocrystals had relatively uniform chain lengths (DP 16.5–25.2), and the helix length (the thickness of nanocrystals) was positively correlated to the thermal stability of starches.

60 APPLIED LIFE SCIENCES↗

Structural basis for the glucan phosphatase activity of Starch Excess4

Living organisms utilize carbohydrates as essential energy storage molecules. Starch is the predominant carbohydrate storage molecule in plants while glycogen is utilized in animals. Starch is a water-insoluble polymer that requires the concerted activity of kinases and phosphatases to solubilize the outer surface of the glucan and mediate starch catabolism. All known plant genomes encode the glucan phosphatase Starch Excess4 (SEX4). SEX4 can dephosphorylate both the starch granule surface and soluble phosphoglucans and is necessary for processive starch metabolism. The physical basis for the function of SEX4 as a glucan phosphatase is currently unclear. Herein, we report the crystal structure of SEX4, containing phosphatase, carbohydrate-binding, and C-terminal domains. The three domains of SEX4 fold into a compact structure with extensive interdomain interactions. The C-terminal domain of SEX4 integrally folds into the core of the phosphatase domain and is essential for its stability. The phosphatase and carbohydrate-binding domains directly interact and position the phosphatase active site toward the carbohydrate-binding site in a single continuous pocket. Mutagenesis of the phosphatase domain residue F167, which forms the base of this pocket and bridges the two domains, selectively affects the ability of SEX4 to function as a glucan phosphatase. Together, these results reveal the unique tertiary architecture of SEX4 that provides the physical basis for its function as a glucan phosphatase.

36 MATERIALS SCIENCE↗

Synchrotron Infrared Confocal Microspectroscopical Detection of Heterogeneity Within Chemically Modified Single Starch Granules

This reports the first detection of chemical heterogeneity in octenyl succinic anhydride modified single starch granules using a Fourier transform infrared (FT-IR) microspectroscopical technique that combines diffraction-limited infrared microspectroscopy with a step size that is less than the mask projected spot size focused on the plane of the sample. The high spatial resolution was achieved with the combination of the application of a synchrotron infrared source and the confocal image plane masking system of the double-pass single-mask Continuum{reg_sign} infrared microscope. Starch from grains such as corn and wheat exists in granules. The size of the granules depends on the plant producing the starch. Granules used in this study typically had a median size of 15 {micro}m. In the production of modified starch, an acid anhydride typically is reacted with OH groups of the starch polymer. The resulting esterification adds the ester carbonyl (1723 cm{sup -1}) organic functional group to the polymer and the hydrocarbon chain of the ester contributes to the CH{sub 2} stretching vibration to enhance the intensity of the 2927 cm{sup -1} band. Detection of the relative modifying population on a single granule was accomplished by ratioing the baseline adjusted peak area of the carbonyl functional group to that of a carbohydrate band. By stepping a confocally defined infrared beam as small as 5 {micro}m x 5 {micro}m across a starch granule 1 {micro}m at a time in both the x and y directions, the heterogeneity is detected with the highest possible spatial resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics of Streptococcus mutans Transcriptome in Response to Starch and Sucrose during Biofilm Development

The combination of sucrose and starch in the presence of surface-adsorbed salivary a-amylase and bacterial glucosyltransferases increase the formation of a structurally and metabolically distinctive biofilm by Streptococcus mutans. This host-pathogen-diet interaction may modulate the formation of pathogenic biofilms related to dental caries disease. We conducted a comprehensive study to further investigate the influence of the dietary carbohydrates on S. mutanstranscriptome at distinct stages of biofilm development using whole genomic profiling with a new computational tool (MDV) for data mining. S. mutans UA159 biofilms were formed on amylase-active saliva coated hydroxyapatite discs in the presence of various concentrations of sucrose alone (ranging from 0.25 to 5% w/v) or in combination with starch (0.5 to 1% w/v). Overall, the presence of sucrose and starch (suc+st) influenced the dynamics of S. mutans transcriptome (vs. sucrose alone), which may be associated with gradual digestion of starch by surface-adsorbed amylase. At 21 h of biofilm formation, most of the differentially expressed genes were related to sugar metabolism, such as upregulation of genes involved in maltose/maltotriose uptake and glycogen synthesis. In addition, the groEL/groES chaperones were induced in the suc+stbiofilm, indicating that presence of starch hydrolysates may cause environmental stress. In contrast, at 30 h of biofilm development, multiple genes associated with sugar uptake/transport (e.g. maltose), two-component systems, fermentation/ glycolysis and iron transport were differentially expressed in suc+st-biofilms (vs. sucrose-biofilms). Interestingly, lytT (bacteria autolysis) was upregulated, which was correlated with presence of extracellular DNA in the matrix of suc+stbiofilms. Specific genes related to carbohydrate uptake and glycogen metabolism were detected in suc+st-biofilms in more than one time point, indicating an association between presence of starch hydrolysates and intracellular polysaccharide storage. Our data show complex remodeling of S. mutans-transcriptome in response to changing environmental conditions in situ, which could modulate the dynamics of biofilm development and pathogenicity.

59 BASIC BIOLOGICAL SCIENCES↗

The Pseudoenzyme β‐Amylase9 From Arabidopsis Activates α‐Amylase3: A Possible Mechanism to Promote Stress‐Induced Starch Degradation

ABSTRACT Starch accumulation in plants provides carbon for nighttime use, for regrowth after periods of dormancy, and for times of stress. Both ɑ‐ and β‐amylases (AMYs and BAMs, respectively) catalyze starch hydrolysis, but their functional roles are unclear. Moreover, the presence of catalytically inactive amylases that show starch excess phenotypes when deleted presents questions on how starch degradation is regulated. Plants lacking one of these catalytically inactive β‐amylases, BAM9, have enhanced starch accumulation when combined with mutations in BAM1 and BAM3, the primary starch degrading BAMs in response to stress and at night, respectively. BAM9 has been reported to be transcriptionally induced by stress although the mechanism for BAM9 function is unclear. From yeast two‐hybrid experiments, we identified the plastid‐localized AMY3 as a potential interaction partner for BAM9. We found that BAM9 interacted with AMY3 in vitro and that BAM9 enhances AMY3 activity about three‐fold. Modeling of the AMY3‐BAM9 complex predicted a previously undescribed alpha–alpha hairpin in AMY3 that could serve as a potential interaction site. Additionally, AMY3 lacking the alpha–alpha hairpin is unaffected by BAM9. Structural analysis of AMY3 showed that it can form a homodimer in solution and that BAM9 appears to replace one of the AMY3 monomers to form a heterodimer. The presence of both BAM9 and AMY3 in many vascular plant lineages, along with model‐based evidence that they heterodimerize, suggests that the interaction is conserved. Collectively these data suggest that BAM9 is a pseudoamylase that activates AMY3 in response to cellular stress, possibly facilitating stress recovery.

Biochemistry & Molecular Biology↗

Disruption of starch biosynthesis and triacylglycerol degradation impairs growth but improves photosynthesis in Arabidopsis

Enhancing lipid accumulation by redirecting carbon from starch to triacylglycerol (TAG) in vegetative tissues is a promising strategy for developing high-energy-density crops for bioenergy production. However, our understanding of how starch and TAG metabolism interact and how this interaction affects growth and photosynthesis is incomplete. Here, we investigated the metabolic and physiological consequences of disrupting starch biosynthesis and TAG turnover in Arabidopsis thaliana by generating single, double, and triple mutants involving ADG1 (starch biosynthesis), TGD1 (lipid trafficking), and SDP1\\\\\\\\r\\\\\\\\n(TAG lipase). Unexpectedly, elimination of starch biosynthesis lowered TAG levels in the high-TAG-accumulating tgd1 mutant, primarily through enhanced TAG breakdown. This decline was completely reversed by sucrose supplementation, suggesting that TAG degradation was induced by carbon limitation.\\\\\\\\r\\\\\\\\nGenetic suppression of TAG turnover via SDP1 disruption in the starchless tgd1 adg1-1 background led to a nine-fold rise in leaf TAG accumulation in the tgd1 sdp1 adg1-1 triple mutant, together with enhanced photosynthetic performance. However, this metabolic reprogramming incurred growth penalties.\\\\\\\\r\\\\\\\\nOur results highlight the role of dynamic TAG turnover in maintaining metabolic balance and photosynthesis in starch-deficient backgrounds. These findings underscore the need for refined metabolic engineering strategies that coordinate TAG biosynthesis and degradation to optimize lipid accumulation in bioenergy crops.

59 BASIC BIOLOGICAL SCIENCES↗

Soybean cotyledon starch metabolism is sensitive to altered gravity conditions

We have demonstrated that etiolated soybean seedlings grown under the altered gravity conditions of clinorotation (1 rpm) and centrifugation (5xg) exhibit changes in starch metabolism. Cotyledon starch concentration was lower (-28%) in clinorotated plants and higher (+24%) in centrifuged plants than in vertical control plants. The activity of ADP-glucose pyrophosphorylase in the cotyledons was affected in a similar way, i.e. lower (-37%) in the clinorotated plants and higher (+22%) in the centrifuged plants. Other starch metabolic enzyme activities, starch synthase, starch phosphorylase and total hydrolase were not affected by the altered gravity treatments. We conclude that the observed changes in starch concentrations were primarily due to gravity-mediated differences in ADP-glucose pyrophosphorylase activity.

Brown, C. S.↗

The influence of microgravity and spaceflight on columella cell ultrastructure in starch-deficient mutants of Arabidopsis

The ultrastructure of root cap columella cells was studied by morphometric analysis in wild-type, a reduced-starch mutant, and a starchless mutant of Arabidopsis grown in microgravity (F-microgravity) and compared to ground 1g (G-1g) and flight 1g (F-1g) controls. Seedlings of the wild-type and reduced-starch mutant that developed during an experiment on the Space Shuttle (both the F-microgravity samples and the F-lg control) exhibited a decreased starch content in comparison to the G-1g control. These results suggest that some factor associated with spaceflight (and not microgravity per se) affects starch metabolism. Elevated levels of ethylene were found during the experiments on the Space Shuttle, and analysis of ground controls with added ethylene demonstrated that this gas was responsible for decreased starch levels in the columella cells. This is the first study to use an on-board centrifuge as a control when quantifying starch in spaceflight-grown plants. Furthermore, our results show that ethylene levels must be carefully considered and controlled when designing experiments with plants for the International Space Station.

manned↗

Equilibrium, Kinetic and Thermodynamic Studies Of Lead (II) Sorption on Hydrolyzed Starch Graft Copolymers

Hydrolyzed starch graft poly (acrylic acid) and starch graft poly(acrylonitrile) copolymers were used as a sorbents for the removal of Pb(II) from aqueous solution in batch process. The sorbents were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and thermogravimetric analysis. The effect of contact time, initial concentration and temperature were assessed to optimize the conditions for maximum sorption of the metal ions. The experimental data were analyzed by Langmuir, Freundlich, Temkin, Dubinin Radushkevich and Sips isotherm models. The Freundlich and the Sips isotherms confirmed the applicability of the models. The sorption capacity of the sorbent was found to be 118.61 mg/g for starch graft poly (acrylic) acid and 115.83 mg/g for starch graft poly (acrylonitrile). The Sorption kinetics was assessed by Lagergren pseudo first order, pseudo second order, Elovich equation, Intraparticle diffusion and the liquid film diffusion models. The experimental data fitted very well with the Elovich equation and the Intraparticle kinetic models. The thermodynamic analysis showed that the sorption was a spontaneous and endothermic process. The results indicated that starch graft copolymers can be used as an effective sorbents for Pb (II) removal from aqueous media.

36 MATERIALS SCIENCE↗

Effect of Oregano Essential Oil Content on Properties of Green Biocomposites Based on Cassava Starch and Sugarcane Bagasse for Bioactive Packaging

In this study, 10 wt% sugarcane bagasse fiber-reinforced starch foam composites were prepared with different oregano essential oil (OEO) contents in the range of 2–8 wt% to improve the antimicrobial effectiveness of bioactive packaging. FT-IR analysis confirms that OEO penetrates into starch foam composite. From the result of antimicrobial activity, the incorporation of 8 wt% OEO in starch foam composite achieves the minimum inhibitory concentration against Escherichia-coli (E. coli) and Staphylococcus-aureus (S. aureus). OEO is more effective against S. aureus (Gram-positive bacteria) than E. coli (Gram-negative bacteria). The water absorption capacity and hygroscopicity of foam composite decrease with increasing OEO content. The lowest monolayer value is observed in starch foam composite containing 8 wt% OEO. The soil biodegradation rate and flexural strength of samples slightly decrease with increasing OEO content. As a result, starch foam composite containing OEO can be applied as bioactive packaging to preserve foods.

54 ENVIRONMENTAL SCIENCES↗

Enhanced Mechanical and Barrier Performance of Poly (Lactic Acid) Based Nanocomposites Using Surface Acetylated Starch Nanocrystals

Poly (lactic) acid (PLA) based nanocomposites reinforced with starch nanocrystals (SNC) extracted from high amylopectin waxy maize starch and acetylated starch nanocrystals (Ac-SNC), were prepared and their influence on the overall properties of PLA nanocomposites were studied. The two nanofillers (SNC and Ac-SNC) were incorporated in PLA at two different loadings (1 and 3 wt%) by solvent casting and evaporation technique. Surface acetylation of SNC was confirmed by Fourier Transform infra-red spectroscopy and nuclear magnetic resonance spectroscopy and the crystalline structure by X-ray diffraction. This paper reports the influence of incorporating unacetylated and surface acetylated starch nanocrystals on morphological, barrier, mechanical, and rheological properties of PLA based nanocomposites. While both nanofillers improved the properties of PLA, the PLA-Ac-SNC had superior properties to that of PLA-SNC nanocomposites, due to better filler dispersion and interaction with the polymer matrix. These sustainable nanocomposites with improved properties will expand the application of these bio-sourced starch nanocrystals. Graphical Abstract: .

36 MATERIALS SCIENCE↗

Development of an enzyme cocktail to bioconvert untapped starch in sweet sorghum processing by-products: Part II. Application and economic potential

Demand for bioethanol and other biochemicals produced from agricultural crops has increased. Sweet sorghum has been identified as a promising bioenergy crop as it can produce starch, sugar, and fibrous biomass. During processing, starch accumulates in the juice sediments and clarification mud. And, while currently not recovered, it can be made accessible for fermentation by enzymatic hydrolysis. The enzymatic hydrolysis of starch in sweet sorghum processing streams was investigated, followed by fermentation of the resulting glucose to ethanol. The juice sediment contained sufficient starch to increase fermentable sugars by 127%, allowing a final ethanol titer of 11.1 vol%. The economics for fermentation of only dissolved sugars (Scenario 1) versus dissolved sugars and hydrolyzed starch (Scenario 2) were compared using a technoeconomic model. Fixed capital cost was found to be similar for both scenarios. For a set harvest period, Scenario 2 could produce 20% more ethanol; however, if the distillation by-product was dried and marketed as animal feed, Scenario 1 was more cost effective. A plant producing 5.6–5.7 Mkg of fuel ethanol per year had a minimum selling price of $0.67/kg of ethanol with concurrent production of animal feed and zero cost sweet sorghum processing. Finally, even with these optimistic assumptions, the estimated production cost was higher than the current wholesale price of fuel ethanol.

09 BIOMASS FUELS↗

Provitamin A biofortification of cassava enhances shelf life but reduces dry matter content of storage roots due to altered carbon partitioning into starch

Storage roots of cassava (Manihot esculenta Crantz), a major subsistence crop of sub-Saharan Africa, are calorie rich but deficient in essential micronutrients, including provitamin A bcarotene. In this study, b-carotene concentrations in cassava storage roots were enhanced by coexpression of transgenes for deoxy-D-xylulose-5-phosphate synthase (DXS) and bacterial phytoene synthase (crtB), mediated by the patatin-type 1 promoter. Storage roots harvested from field-grown plants accumulated carotenoids to ≤50 lg/g DW, 15- to 20-fold increases relative to roots from nontransgenic plants. Approximately 85%–90% of these carotenoids accumulated as all-trans-b-carotene, the most nutritionally efficacious carotenoid. b-Caroteneaccumulating storage roots displayed delayed onset of postharvest physiological deterioration, a major constraint limiting utilization of cassava products. Large metabolite changes were detected in b-carotene-enhanced storage roots. Most significantly, an inverse correlation was observed between b-carotene and dry matter content, with reductions of 50%–60% of dry matter content in the highest carotenoid-accumulating storage roots of different cultivars. Further analysis confirmed a concomitant reduction in starch content and increased levels of total fatty acids, triacylglycerols, soluble sugars and abscisic acid. Potato engineered to co-express DXS and crtB displayed a similar correlation between b-carotene accumulation, reduced dry matter and starch content and elevated oil and soluble sugars in tubers. Transcriptome analyses revealed a reduced expression of genes involved in starch biosynthesis including ADP-glucose pyrophosphorylase genes in transgenic, carotene-accumulating cassava roots relative to nontransgenic roots. These findings highlight unintended metabolic consequences of provitamin A biofortification of starch-rich organs and point to strategies for redirecting metabolic flux to restore starch production.

54 ENVIRONMENTAL SCIENCES↗

Application of Sorghum Starch for Preparing Superabsorbent

Starch was extracted from Sorghum bicolor grains by alkali steeping method and was utilized for the production of absorbent material by grafting and crosslinking with binary mixtures of vinyl monomers viz. acrylic acid and acrylamide. Both unmodified and modified starches were characterized with Thermogravimetric analysis, Infra-Red spectroscopy, Scanning electron microscopy and X-ray diffraction analysis, to ascertain the modification of the starch. The parameters of the reaction system viz. initiator concentration, monomer concentration, starch to monomer ratio, etc. were optimized. The modified starch showed enhanced water absorption in the range of 49–85 g/g. Absorbency of the products increased after treatment with aqueous alkali solution due to saponification at higher temperature. The saponified products showed increased water absorption level in the range of 245–400 g/g. The product thus obtained using optimized condition of grafting, on saponification found to be highly superabsorbent displaying the water absorbency of 400 g/g. The influence of pH on absorption of water was also tested and best results were obtained at pH 7–8.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of β-Cyclodextrin Immobilized Starch and Its Application for the Removal of Dyestuff from Waste-Water

A natural polymeric adsorbent, β-cyclodextrin immobilized starch (CS-βCD) was prepared by introducing host functional molecule β-cyclodextrin (β-CD) onto starch in presence of citric acid. The immobilization conditions were optimized to: m CA:m CS = 1:2, reaction time of 2 h and reaction temperature at 120 °C, by varying the input levels of the reactant, CS-βCD with a series of immobilization ratio (IR) and carboxyl content (CC) could be obtained. The FT-IR and {sup 13}C-NMR analysis indicated the β-CD molecules have been immobilized onto starch via the formation of ester linkages. The XRD and SEM analysis showed CS-βCD had more looser structure and more irregular surface compared with native starch. The GPC analysis showed CS-βCD had a reduced molecular weight but a more complicated molecular configuration. The adsorbing capacities of CS-βCD to three cationic dyes (methylene blue, methyl purple and basic fuchsin) were significantly improved compared with native starch, diatomite and zeolite. The adsorption behaviors of CS-βCD to the three dyes had high fitting degrees to both Langmuir and Freundlich models (R{sup 2} > 0.98). The decolourization ratio of CS-βCD to the mixed dyestuff waste-water had reached 88.75%, which was much higher than other absorbents. The results indicated the CS-βCD would become a high-efficiency dyestuff adsorbent, and would have a promising application in the industrial dyestuff waste-water treatment.

36 MATERIALS SCIENCE↗

Phototropin connects blue light perception to starch metabolism in green algae

Abstract In photosynthetic organisms, light acts as an environmental signal to control their development and physiology, as well as energy source to drive the conversion of CO 2 into carbohydrates used for growth or storage. The main storage carbohydrate in green algae is starch, which accumulates during the day and is broken down at night to meet cellular energy demands. The signaling role of light quality in the regulation of starch accumulation remains unexplored. Here, we identify PHOTOTROPIN-MEDIATED SIGNALING KINASE 1 (PMSK1) as a key regulator of starch metabolism inChlamydomonas reinhardtii. In its phosphorylated form (PMSK1-P), it activates GLYCERALDEHYDE-3-PHOSPHATE DEHYDROGENASE (GAP1), promoting starch biosynthesis. We show that blue light, perceived by PHOTOTROPIN, induces PMSK1 dephosphorylation that in turn represses GAP1 mRNA levels and reduces starch accumulation. These findings reveal a previously uncharacterized blue light-mediated signaling pathway that advances our understanding of photoreceptor-controlled carbon metabolism in microalgae.

Science & Technology - Other Topics↗