Search NASA⌕ Search

SEARCH · Search NASA

Results for “STEERABLE ANTENNA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Airoscope telemetry system

The AIROscope (Ames Infrared Observatory telescope) telemetry system is described from signal conditioning on the gondola to display and storage at the ground station. All analog and digital data from the systems and experiments on the gondola go to a PCM encoder which formats the data into 10-bit words. Therefore, 0.1-percent resolution is inherently available for experimental data. The coded bit stream directly modulates the carrier of the FM transmitter. To insure reliable transmission over a 650-km range an 11-watt FM transmitter operating at 1483.5 MHz is used on the gondola. Modulation is narrow band FM with a maximum deviation of plus or minus 500 kHz. The maximum modulation frequency is determined by the data bit rate which could be as high as 500 kbps. Presently, a rate of 20.48 kbps is used. The ground station receiving system includes a steerable antenna (19-db gain), preamplifier (21-db gain) and receiver. All data are recorded on a tape recorder. The recorded signal then can be played back through the PCM decommutator unit at a later time for detailed data analysis by the experimenter.

Pitts, K. J.↗
NASA NTRS1986

Millstone Hill measurements and TGCM simulation for the 30 May 1984 annular solar eclipse

On 30 May 1984, the Millstone Hill incoherent scatter radar was operated to gather data on the effects of the annular solar eclipse on the structure and dynamics of the ionosphere and thermosphere. The eclipse path was about 3 deg. south of Millstone which experienced a maximum obscuration of 86% at about 1705 UT. Both the zenith steerable antennas at Millstone were used in the experiment to collect data on the temporal evolution of the eclipse effects. This experiment represented the first opportunity at Millstone to collect data during an eclipse in the absence of a major magnetospheric disturbance which had previously made the unravelling of eclipse effects difficult. In addition, the configuration of the experiment and analysis of the data included a detailed examination of the effects on the neutral atmosphere. A major catalyst for this study was the opportunity to compare the results with the predictions made from the Thermospheric General Circulation Model (TGCM) at NCAR, as a calibration point for the model. The Arecibo and Sondrestrom radars also participated as part of a radar chain experiment. The analysis of the data from these stations is in progress; the initial results from Millstone Hill are presented.

Salah, J. E.↗
NASA NTRS1992

Fabrication Of High-Tc Superconducting Integrated Circuits

Microwave ring resonator fabricated to demonstrate process for fabrication of passive integrated circuits containing high-transition-temperature superconductors. Superconductors increase efficiencies of communication systems, particularly microwave communication systems, by reducing ohmic losses and dispersion of signals. Used to reduce sizes and masses and increase aiming accuracies and tracking speeds of millimeter-wavelength, electronically steerable antennas. High-Tc superconductors preferable for such applications because they operate at higher temperatures than low-Tc superconductors do, therefore, refrigeration systems needed to maintain superconductivity designed smaller and lighter and to consume less power.

Bhasin, Kul B.↗
NASA NTRS1995

ACTS broadband aeronautical terminal

This paper discusses the design of, and experiments with, the ACTS Broadband Aeronautical Terminal. As part of the ongoing effort to investigate commercial applications of ACTS technologies, NASA's Jet Propulsion Laboratory and various industry/government partners are developing a broadband mobile terminal for aeronautical applications. The ACTS Broadband Aeronautical Terminal is designed to explore the use of K/Ka-band for high data rate aeronautical satellite communications. Currently available commercial aeronautical satellite communications systems are only capable of achieving data rates on the order of tens of kilobits per second. The broadband terminal used in conjunction with the ACTS mechanically steerable antenna, can achieve data rates of 384 kilobits per second, while use of an ACTS spot beam antenna with this terminal will allow up to T1 data rates (1.544 megabits per second). The aeronautical terminal will be utilized to test a variety of applications that require a high data rate communications link. The use of the K/Ka-band for wideband aeronautical communications has the advantages of spectrum availability and smaller antennas, while eliminating the one major drawback of this frequency band, rain attenuation, by flying above the clouds the majority of the time.

Agan, M. J.↗
NASA NTRS1999

ACTS Ka-band Propagation Research in a Spatially Diversified Network with Two USAT Ground Stations

Congestion in the radio spectrum below 18 GHz is stimulating greater interest in the Ka (20/30 GHz) frequency band. Transmission at these shorter wavelengths is greatly influenced by rain resulting in signal attenuation and decreased link availability. The size and projected cost of Ultra Small Aperture Terminals (USATS) make site diversity methodology attractive for rain fade compensation. Separation distances between terminals must be small to be of interest commercially. This study measures diversity gain at a separation distance <5 km and investigates utilization of S-band weather radar reflectivity in predicting diversity gain. Two USAT ground stations, separated by 2.43 km for spatial diversity, received a continuous Ka-band tone sent from NASA Glenn Research Center via the Advanced Communications Technology Satellite (ACTS) steerable antenna beam. Received signal power and rainfall were measured, and Weather Surveillance Radar-1998 Doppler (WSR-88D) data were obtained as a measure of precipitation along the USAT-to-ACTS slant path. Signal attenuation was compared for the two sites, and diversity gain was calculated for fades measured on eleven days. Correlation of WSR-88D S-band reflectivity with measured Ka-band attenuation consisted of locating radar volume elements along each slant path, converting reflectivity to Ka-band attenuation with rain rate calculation as an intermediate step. Specific attenuation for each associated path segment was summed, resulting in total attenuation along the slant path. Derived Ka-band attenuation did not correlate closely with empirical data (r = 0.239), but a measured signal fade could be matched with an increase in radar reflectivity in all fade events. Applying a low pass filter to radar reflectivity prior to deriving Ka-band attenuation improved the correlation between measured and derived signal attenuation (r = 0.733). Results indicate that site diversity at small separation distances is a viable means of rain fade compensation, and that existing models underestimate diversity gain for a subtropical climate such as Florida. Also, filtered WSR-88D reflectivity can be used for optimizing diversity terminal placement by comparing derived Ka- band attenuation between the diversity sites.

Kalu, Alex↗
NASA NTRS1997

The Development of Si and SiGe Technologies for Microwave and Millimeter-Wave Integrated Circuits

Historically, microwave technology was developed by military and space agencies from around the world to satisfy their unique radar, communication, and science applications. Throughout this development phase, the sole goal was to improve the performance of the microwave circuits and components comprising the systems. For example, power amplifiers with output powers of several watts over broad bandwidths, low noise amplifiers with noise figures as low as 3 dB at 94 GHz, stable oscillators with low noise characteristics and high output power, and electronically steerable antennas were required. In addition, the reliability of the systems had to be increased because of the high monetary and human cost if a failure occurred. To achieve these goals, industry, academia and the government agencies supporting them chose to develop technologies with the greatest possibility of surpassing the state of the art performance. Thus, Si, which was already widely used for digital circuits but had material characteristics that were perceived to limit its high frequency performance, was bypassed for a progression of devices starting with GaAs Metal Semiconductor Field Effect Transistors (MESFETs) and ending with InP Pseudomorphic High Electron Mobility Transistors (PHEMTs). For each new material or device structure, the electron mobility increased, and therefore, the high frequency characteristics of the device were improved. In addition, ultra small geometry lithographic processes were developed to reduce the gate length to 0.1 pm which further increases the cutoff frequency. The resulting devices had excellent performance through the millimeter-wave spectrum.

Ponchak, George E.↗
NASA NTRS2005

LEO Download Capacity Analysis for a Network of Adaptive Array Ground Stations

To lower costs and reduce latency, a network of adaptive array ground stations, distributed across the United States, is considered for the downlink of a polar-orbiting low earth orbiting (LEO) satellite. Assuming the X-band 105 Mbps transmitter of NASA s Earth Observing 1 (EO-1) satellite with a simple line-of-sight propagation model, the average daily download capacity in bits for a network of adaptive array ground stations is compared to that of a single 11 m dish in Poker Flats, Alaska. Each adaptive array ground station is assumed to have multiple steerable antennas, either mechanically steered dishes or phased arrays that are mechanically steered in azimuth and electronically steered in elevation. Phased array technologies that are being developed for this application are the space-fed lens (SFL) and the reflectarray. Optimization of the different boresight directions of the phased arrays within a ground station is shown to significantly increase capacity; for example, this optimization quadruples the capacity for a ground station with eight SFLs. Several networks comprising only two to three ground stations are shown to meet or exceed the capacity of the big dish, Cutting the data rate by half, which saves modem costs and increases the coverage area of each ground station, is shown to increase the average daily capacity of the network for some configurations.

Ingram, Mary Ann↗
NASA NTRS2013

The Arctic Regional Communications Small SATellite (ARCSAT)

Traditional satellite missions are extremely complex and expensive to design, build, test, launch and operate. Consequently many complementary operational, exploration and research satellite missions are being formulated as a growing part of the future space community capabilities using formations of small, distributed, simple to launch and inexpensive highly capable small scale satellites. The Arctic Regional Communications small SATellite (ARCSAT) initiative would launch a Mini-Satellite "Mothership" into Polar or Sun Sync low-earth-orbit (LEO). Once on orbit, the Mothership would perform orbital insertion of four internally stored independently maneuverable nanosatellites, each containing electronically steerable antennas and reconfigurable software-defined radios. Unlike the traditional geostationary larger complex satellite communication systems, this LEO communications system will be comprised of initially a five small satellite formation that can be later incrementally increased in the total number of satellites for additional data coverage. ARCSAT will provide significant enabling capabilities in the Arctic for autonomous voice and data communications relay, Maritime Domain Awareness (MDA), data-extraction from unattended sensors, and terrestrial Search & Rescue (SAR) beacon detection missions throughout the "data starved desert" of the Arctic Region.

Casas, Joseph↗
NASA NTRS2011

Producing Science-Ready Radar Datasets for the Retrieval of Forest Structure Parameters from Backscatter: Correcting for Terrain Topography and Changes in Vegetation Reflectivity

Radar backscatter data contain both geometric and radiometric distortions due to underlying topography and the radar viewing geometry. Our objective is to develop a radiometric correction algorithm specific to the UAVSAR system configuration that would improve retrieval of forest structure parameters. UAVSAR is an airborne Lband radar capable of repeat?pass interferometry producing images with a spatial resolution of 5m. It is characterized by an electronically steerable antenna to compensate for aircraft attitude. Thus, the computation of viewing angles (i.e. look, incidence and projection) must include aircraft attitude angles (i.e. yaw, pitch and roll) in addition to the antenna steering angle. In this presentation, we address two components of radiometric correction: area projection and vegetation reflectivity. The first correction is applied by normalization of the radar backscatter by the local ground area illuminated by the radar beam. The second is a correction due to changes in vegetation reflectivity with viewing geometry.

polarimetry↗
NASA NTRS2019

Flexible Modem Interface (FMI) in Space - Extending Standardized Commercial Satellite Communications Services to Space Users

Recent innovations are producing a multitude of advanced commercial satellite communications (COMSATCOM) systems that could deliver massive amounts of SATCOM capacity at a fraction of current cost while also offering reliability and availability that is critical to achieving mission success for orbiting assets. Recognizing the alignment of commercial capabilities with the National Aeronautics and Space Administration's (NASA) diverse mission requirements, the agency is proactively engaging industry to formulate strategies leading towards a NASA communications architecture that includes advanced commercial capabilities. To fully leverage the expanded space resources, NASA must also address the integration of commercial waveforms into its space terminals. In pursuit of similar goals, the United States Department of Defense (DoD) is leading the standardization of the flexible modem interface (FMI) to address service integration for their tactical terminals in pursuit of a DoD Wideband SATCOM Enterprise.This paper describes how NASA is adapting this FMI standard to work with the Space Telecommunications Radio System (STRS) software-defined radio (SDR) framework to address the challenging size, weight, and power resource requirements for terminals in space. A full adaptation would include waveform compatibility with modular baseband processing, frequency compatibility with a wideband front end, and radiated beam control with an electronically steerable antenna to enable multi-provider commercial service capability in a feasible package for space terminals. Security is also a key aspect to be addressed for this integration since data will flow through commercial networks, commercial service providers have their own security mechanisms, and space terminals must be able to securely load proprietary software and firmware needed to access the commercial networks on demand. Success of this effort means commercial partners will be able to allow network-compliant implementations to be hosted on STRS-compliant SDRs in space for reliable and capable network access.

COMSATCOM↗
NASA NTRSDate not supplied

Power and Propulsion Element Steerable High Gain Antenna Lunar Transit Thermal Analysis Tracking Methodology

The Power and Propulsion Element (PPE) is an ion thruster propulsion spacecraft developed as an element of Space Reactor (SR-1) Freedom to provide propulsion, communications and power for the spacecraft. PPE was originally being developed for the use with the lunar orbiting space station Gateway as one of the first two planned elements. PPE was to be launched with the Habitation and Logistics Outpost (HALO) element in a configuration called the Co-Manifested Vehicle (CMV) that would arrive at a Near-Rectilinear Halo Orbit (NRHO) around the Moon via a lunar transit spiral trajectory phase. The PPE communication system is equipped with two Steerable High Gain Antennas (SHGA) each steered by a two-axis gimbal (TAG) mechanism. A thermal analysis was conducted during the near-Earth spiral phase of the mission using Thermal Desktop (TD). This analysis utilized multiple axis Earth tracking articulators in combination with SINDA system internal environmental heating symbols to produce accurate Earth ground station tracking communication system temperatures. This presentation provides an overview of the communication system thermal model and the analysis methodology.

Thermal Analysis↗
NASA NTRS1986

Mobile satellite communications - Vehicle antenna technology update

This paper discusses options for vehicle antennas to be used in mobile satellite communications systems. Two types of antennas are identified. A non-steerable, azimuthally omnidirectional antenna with a modest gain of 3 to 5 dBi is suggested when a low cost is desired. Alternatively, mechanically or electronically steerable antennas with a higher gain of 10 to 12 dBi are suggested to alleviate power and spectrum scarcity associated with mobile satellite communications. For steerable antennas, both open-loop and closed-loop pointing schemes are discussed. Monopulse and sequential lobing are proposed for the mechanically steered and electronically steered antennas, respectively. This paper suggests a hybrid open-loop/closed-loop pointing technique as the best performer in the mobile satellite environment.

Bell, D.↗
NASA NTRS1975

Electronically steerable millimeter wave antenna techniques for space shuttle applications

A large multi-function antenna aperture and related components are described which will perform electronic steering of one or more beams for two of the three applications envisioned: (1) communications, (2) radar, and (3) radiometry. The array consists of a 6-meter folded antenna that fits into two pallets. The communications frequencies are 20 and 30 GHz, while the radar is to operate at 13.9 GHz. Weight, prime power, and volumes are given parametrically; antenna designs, electronics configurations, and mechanical design were studied.

Kummer, W. H.↗
NASA NTRS1965

Telstar I, volume 4

Volume IV of NASA Special Publication SP-32 was originally intended to contain only those papers published outside of the Bell System Technical Journal that were pertinent to the Telstar I project. However, since that time, the results of Telstar II have been reported to NASA by the Bell Telephone Laboratories. It was then decided that this report should also be included.

PERFORMANCE CHARACTERISTICS↗