Results for “STEM Evaluations” — Page 3

DOE OSTI2020

An Overview of Neutron Irradiated SiC Layer Behavior using Micro-and Nano-Characterization Techniques

The complexity of fission product distribution and composition within the SiC layer of tristructural isotropic (TRISO) coated particles, irradiation effects on the SiC structure as well as the variable nature of metallic fission product release, has led to the exploration of multiple micro- and nano-characterization techniques. The fine scale of the fission product precipitates necessitates unique learnings and application of electron microscopic techniques with irradiated fuel during the Advanced Gas Reactor (AGR)-1 experiment analysis. A summarized discussion on the specific advanced techniques with associated method development for TRISO coated particles is provided followed by the down selected techniques currently considered to provide the highest impact. Techniques considered are electron probe micro-analyzer (EPMA), scanning transmission electron microscopy (STEM), and Precession electron diffraction (PED). SiC grain boundary characteristics are evaluated due to the mobility of specific fission products through grain boundaries. PED was performed for understanding the role of grain boundary character on fission product transport. One set of comparative analyses between AGR-1 and AGR-2 particles leads to a finding that the AGR-1, high-Ag-retention particle, had statistically more coincidence site lattice (CSL)-related grain boundaries (but fewer low-angle grain boundaries), compared to the AGR-2 particle. This implies that CSL-related grain boundaries may have a direct influence on Ag retention. However, precipitates were found on a relatively small fraction of CSL-related grain boundaries in both particles. In another set of comparison between AGR-1 and AGR-2 particles that were subjected to safety testing, there is significant differences in average SiC grain boundary distributions, but the fission product distributions on these grain boundaries are very similar.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2021

Micro- and Nano-techniques for the Study of Fission Product Precipitation in SiC Layer

The complexity of fission product distribution and composition within the SiC layer of tristructural isotropic (TRISO) coated particles, irradiation effects on the SiC structure as well as the variable nature of metallic fission product release, has led to the exploration of multiple micro- and nano-characterization techniques. The fine scale of the fission product precipitates necessitates unique learnings and application of electron microscopic techniques with irradiated fuel during the Advanced Gas Reactor (AGR)-1 experiment analysis. A summarized discussion on the specific advanced techniques with associated method development for TRISO coated particles is provided followed by the down selected techniques currently considered to provide the highest impact. Techniques considered are electron probe micro-analyzer (EPMA), scanning transmission electron microscopy (STEM), and Precession electron diffraction (PED). SiC grain boundary characteristics are evaluated due to the mobility of specific fission products through grain boundaries. PED was performed for understanding the role of grain boundary character on fission product transport. One set of comparative analyses between AGR-1 and AGR-2 particles leads to a finding that the AGR-1, high-Ag-retention particle, had statistically more coincidence site lattice (CSL)-related grain boundaries (but fewer low-angle grain boundaries), compared to the AGR-2 particle. This implies that CSL-related grain boundaries may have a direct influence on Ag retention. However, precipitates were found on a relatively small fraction of CSL-related grain boundaries in both particles. In another set of comparison between AGR-1 and AGR-2 particles that were subjected to safety testing, there is significant differences in average SiC grain boundary distributions, but the fission product distributions on these grain boundaries are very similar.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

GeoBridge: Connecting Communities to Geothermal Information and Opportunities: Preprint

The geothermal community is well established with long-standing events, organizations, and tools that are known across the geothermal community. But many of these tools and resources are located behind pay walls, require memberships, or are otherwise difficult to find, especially for people looking to join the geothermal community. These barriers to access can prevent outsiders from discovering valuable geothermal resources, limiting the geothermal community's potential for collaboration with other communities, such as clean energy entrepreneurs looking to expand into geothermal energy. The Department of Energy's (DOE) GeoBridge serves to bring these communities together by acting as a single, publicly accessible, searchable portal that facilitates easy access to available geothermal knowledge and information. It works to expand and diversify the pool of geothermal stakeholders by providing in-roads to geothermal information and community resources. It helps build a stronger geothermal community; one inclusive of individuals and groups from a variety of different backgrounds, including potential investors and start-up companies looking to accelerate innovation in geothermal technologies. By linking communities to geothermal information, analysis and expertise, GeoBridge serves as a launch point, directing interested parties to existing data and tools, events, educational resources, STEM programs, permitting and regulatory information, and other resources that can be used to evaluate, promote, and discover geothermal opportunities.

access↗

DOE OSTI2025

GeoBridge: Connecting Communities to Geothermal Information and Opportunities

The geothermal community is well established with long-standing events, organizations, and tools that are known across the geothermal community. But many of these tools and resources are located behind pay walls, require memberships, or are otherwise difficult to find, especially for people looking to join the geothermal community. These barriers to access can prevent outsiders from discovering valuable geothermal resources, limiting the geothermal community's potential for collaboration with other communities, such as clean energy entrepreneurs looking to expand into geothermal energy. The Department of Energy's (DOE) GeoBridge serves to bring these communities together by acting as a single, publicly accessible, searchable portal that facilitates easy access to available geothermal knowledge and information. It works to expand and diversify the pool of geothermal stakeholders by providing in-roads to geothermal information and community resources. It helps build a stronger geothermal community; one inclusive of individuals and groups from a variety of different backgrounds, including potential investors and start-up companies looking to accelerate innovation in geothermal technologies. By linking communities to geothermal information, analysis and expertise, GeoBridge serves as a launch point, directing interested parties to existing data and tools, events, educational resources, STEM programs, permitting and regulatory information, and other resources that can be used to evaluate, promote, and discover geothermal opportunities.

access↗

DOE OSTI2022

Effects of the method of active site characterization for determining structure-sensitivity in Ag-catalyzed ethylene epoxidation

We report catalysts have been prepared on a low surface area α-Al 2 O 3 support used commercially for previous generation olefin epoxidation catalysts. Prescreening of the low surface area alumina (0.73 m 2 /g) indicated the absence of acid catalyzed isomerization of EO at an evaluation temperature of 210 °C. A 0.1 wt% Ag base material synthesized by incipient wetness impregnation of AgNO 3 was used as a base material for electroless deposition (ED) of additional Ag to increase particle sizes by controlled reduction of Ag + directly onto the preexisting Ag surface to form weight loadings between 0.3 and 5.0 wt% metal. A 12 wt% Ag/α-Al 2 O 3 using Ag 2 C 2 O 4 as the Ag precursor was also prepared to compare performance of the ED samples with a catalyst more typical of industrial formulations. Characterization by SEM, STEM, and hydrogen titration of oxygen precovered Ag characterized before and after catalytic evaluation indicated that microscopy is required to accurately represent distributions of Ag particle sizes, but H 2 titration of O-precovered Ag gives the best representation of active sites since it directly counts the number of Ag surface sites. Larger particles >100 nm are resistant to both Ag sintering and carbon foulant; TOF values were relatively insensitive to particle size with only a 2.2 × difference between the best and worst performing samples. Selectivity, which is not a function of TOF, shows the most significant structure sensitivity effect where particle sizes follow the trend 67 nm ≈ 92 nm (58% EO) < 157 nm (67% EO) < 211–542 nm (73% EO). The lower EO selectivities were also correlated with increased fouling for the smaller Ag sizes, suggesting that more strongly bound EO precursor(s) leads to combustion and CO 2 /H 2 O formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Spatial profiles of photon chemical potential in near-field thermophotovoltaic cells

Emitted photons stemming from the radiative recombination of electron–hole pairs carry chemical potential in radiative energy converters. This luminescent effect can substantially alter the local net photogeneration in near-field thermophotovoltaic cells. Several assumptions involving the luminescent effect are commonly made in modeling photovoltaic devices; in particular, the photon chemical potential is assumed to be zero or a constant prescribed by the bias voltage. The significance of photon chemical potential depends upon the emitter temperature, the semiconductor properties, and the injection level. Hence, these assumptions are questionable in near-field thermophotovoltaic devices with nanoscale separation distances between the emitter and the cell. In the present work, an iterative solver that combines fluctuational electrodynamics with the drift-diffusion model is developed to tackle the coupled photon and charge transport problem, enabling the determination of the spatial profile of photon chemical potential beyond the detailed balance approach. Here, the difference between the results obtained by allowing the photon chemical potential to vary spatially and by assuming a constant value demonstrates the limitations of the conventional approaches. This study is critically important for performance evaluation of near-field thermophotovoltaic systems with nanoscale vacuum gaps.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2022

Utility of Circulating MicroRNA-150 for Rapid Evaluation of Bone Marrow Depletion After Radiation and Efficiency of Bone Marrow Reconstitution

Total body irradiation (TBI) is a common myeloablative preparative regimen used in acute myeloid and lymphoblastic leukemia patients before allogenic hematopoietic stem cell transplantation (HSCT). The inefficient clearance of tumor cells and radiation-induced toxicity to normal tissues is attributed to relapse and morbidity in a significant fraction of patients. Developing biomarkers that indicate an individual's physiological response to radiation will allow personalized treatment and follow-up. We investigated the utility of circulating microRNA150-5p (miR150) for evaluation of radiation dose response.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

DOE OSTI2024

Formation of Fully Stoichiometric, Oxidation-State Pure Neptunium and Plutonium Dioxides from Molecular Precursors

Amidate-based ligands (N-(tert-butyl)isobutyramide, ITA) bind κ 2 to form homoleptic, 8-coordinate complexes with tetravalent 237 Np (Np(ITA) 4 , 1-Np) and 242 Pu (Pu(ITA) 4 , 1-Pu). These compounds complete an isostructural series from Th, U–Pu and allow for the direct comparison between many of the early actinides with stable tetravalent oxidation states by nuclear magnetic resonance (NMR) spectroscopy and single crystal X-ray diffraction (SCXRD). The molecular precursors are subjected to controlled thermolysis under mild conditions with the exclusion of exogenous air and moisture, facilitating the removal of the volatile organic ligands and ligand byproducts. The preformed metal–oxygen bond in the precursor, as well as the metal oxidation state, are maintained through the decomposition, forming fully stoichiometric, oxidation-state pure NpO 2 and PuO 2 . Powder X-ray diffraction (PXRD), scanning transmission electron microscopy (STEM), and energy dispersive X-ray spectroscopy (EDS) elemental mapping supported the evaluation of these high-purity materials. This chemistry is applicable to a wide range of metals, including actinides, with accessible tetravalent oxidation states, and provides a consistent route to analytical standards of importance to the field of nuclear nonproliferation, forensics, and fundamental studies.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2025

Understanding (La,Sr)(Co,Fe)O$_{3-δ}$ Phase Instability within SOECs Using a Combined Experimental and Atomistic Modeling Approach

Understanding the onset of degradation in the air electrode within solid oxide electrolysis cells (SOECs), and the subsequent impact on cell performance, is a critical step in mitigating the performance losses and stability issues of SOECs. In an effort to identify early onset degradation phenomena, SOECs were characterized as fabricated and after testing potentiostatically at 1.3 V for 1000 h at 750 °C. SOEC air electrodes composed of a 1:1 composite of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3–δ (6428-LSCF) and Gd 0.1 Ce 0.9 O 1.95 (GDC) were studied using synchrotron X-ray diffraction (XRD), scanning transmission electron microscopy coupled with energy dispersive X-ray spectroscopy (STEM-EDS), and X-ray absorption near-edge spectroscopy (XANES) to evaluate the changes in the air electrode structurally and chemically. These techniques show the migration of Sr species from the air electrode through pores in the GDC barrier layer, progressing to the electrolyte boundary, where it accumulates and reacts with (Zr 0.84 Y 0.16 )O 2–δ (YSZ) to form SrZrO 3 . Microscopy results are paired with atomistic simulations to better understand the relationship between the thermodynamic instability of 6428-LSCF and cell fabrication/testing conditions. First-principles calculations reveal that LSCF-6428 is not stable during cell manufacturing and testing conditions, which supports the experimental identification of secondary phases in both as-fabricated and tested cells. Together, these results demonstrate that the challenging environments encountered by SOECs during cell manufacturing and operation lead to instabilities of the target 6428-LSCF anode material and underscore the need for more durable, high-performing SOEC components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Geologic Seawater Air Conditioning (GeoSWAC) System: Resource Assessment and Techno-Economic Evaluation in Puerto Rico

Puerto Rico's hot, humid climate drives a high and persistent demand for cooling, straining an aging and fuel-dependent energy grid while increasing peak electricity loads. Much of this challenge stems from inefficient air-conditioning systems operating in buildings without passive cooling design, making cooling both costly and vulnerable to disruption - especially during hurricanes. To address these issues, researchers evaluated a new alternative called Geologic Seawater Air Conditioning (GeoSWAC), which uses inland wells connected to naturally cold, deep seawater. By avoiding long offshore pipelines and energy-intensive refrigeration cycles, GeoSWAC can cut electricity use by 75-90%, reduce environmental impacts, and operate more reliably during power outages. A case study at the University of Puerto Rico's Rio Piedras campus found that GeoSWAC could deliver significantly lower levelized costs of cooling, reduced operational expenses, and improved water conservation compared to the campus's existing chilled-water plant. The system offers key advantages - including access to a constant cold heat sink, low pumping requirements, and enhanced resilience - for coastal regions such as Puerto Rico, the broader Caribbean, and Florida. However, its effectiveness depends heavily on site-specific geological conditions, such as subsurface connectivity and aquifer characteristics, which require detailed investigation. Future research should refine hydrogeological models, conduct performance and economic analyses, and address regulatory and permitting frameworks to support broader adoption of this promising technology.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2021

Increasing Diversity in Energy Efficiency Professions: JUMP into STEM

A long-term approach to achieving equity in the energy efficiency industry is to increase the overall diversity of the professionals who work in the field. Building science professionals have a direct impact on energy efficiency policy and programs, as many become leaders within the industry. Buildings are used every day by almost all members of U.S. society, so diversity in building science professionals is critical to better understanding the behaviors and needs of the full spectrum of building occupants. Many groups of people, including minorities and women, are underrepresented in the industry. The industry needs to attract a wide range of current college and university students to careers in building science, so that many perspectives are included in the clean energy transition. The JUMP into STEM student competition addresses this need by inspiring students from diverse backgrounds to use creative ideation to solve real-world building science problems. Student teams - comprising an interdisciplinary mix of majors and underrepresented groups in science, technology, engineering, and math (STEM) - respond to one of three buildings-related challenges. Diversity is encouraged through challenge design, competition guidelines, and evaluation criteria for the submission. Winners of the competition are awarded paid building science internships, a gateway to a career in this field. The competition has an advisory panel of diversity experts and a professor team that includes representation from minority-serving institutions. This paper presents the JUMP into STEM approach to fostering diversity and creative ideation on technical challenges and discusses outcomes from the 2019 and 2020 competitions.

buildings↗

DOE OSTI2022

Analysis of Interpretable Data Representations for 4D-STEM Using Unsupervised Learning

Abstract Understanding the structure of materials is crucial for engineering devices and materials with enhanced performance. Four-dimensional scanning transmission electron microscopy (4D-STEM) is capable of mapping nanometer-scale local crystallographic structure over micron-scale field of views. However, 4D-STEM datasets can contain tens of thousands of images from a wide variety of material structures, making it difficult to automate detection and classification of structures. Traditional automated analysis pipelines for 4D-STEM focus on supervised approaches, which require prior knowledge of the material structure and cannot describe anomalous or deviant structures. In this article, a pipeline for engineering 4D-STEM feature representations for unsupervised clustering using non-negative matrix factorization (NMF) is introduced. Each feature is evaluated using NMF and results are presented for both simulated and experimental data. It is shown that some data representations more reliably identify overlapping grains. Additionally, real space refinement is applied to identify spatially distinct sample regions, allowing for size and shape analysis to be performed. This work lays the foundation for improved analysis of nanoscale structural features in materials that deviate from expected crystallographic arrangement using 4D-STEM.

Bruefach, Alexandra (ORCID:0000000209323477)↗

DOE OSTI2025

Evaluating an Earth system model from a water manager perspective

Abstract. The large spatial scale of global Earth system models (ESMs) is often cited as an obstacle to using the output by water resource managers in localized decisions. Recent advances in computing have improved the fidelity of hydrological responses in ESMs through increased connectivity between model components. However, the models are seldom evaluated for their ability to reproduce metrics that are important for and resonate with practitioners or that allow practitioners to situate higher-resolution model outputs within a cascade of uncertainty stemming from different models and scenarios. We draw on the combined experience of the author team and water manager workshop participants to identify salient water management metrics and evaluate whether they are credibly reproduced over the conterminous USA by the Community Earth System Model v2 (CESM2) Large Ensemble. We find that, while the exact values may not match the observations, aspects such as interannual variability can be reproduced by CESM2 for the mean wet day precipitation and length of dry spells. CESM2 also captures the proportion of total annual precipitation that derives from the heaviest rain days in watersheds that are not snow-dominated. Aggregating the 7 d mean daily runoff to two-digit Hydrological Unit Code (HUC2) watersheds also shows that rain-dominated regions capture the timing and interannual variability of annual maximum and minimum flows. We conclude that there is potential for far greater use of large-ensemble ESMs, such as CESM2, in long-range water management decisions to supplement high-resolution regional projections.

Tye, Mari R. (ORCID:0000000324911020)↗

DOE OSTI2023

Carbon Outgassing in the Antarctic Circumpolar Current Is Supported by Ekman Transport From the Sea Ice Zone in an Observation‐Based Seasonal Mixed‐Layer Budget

Despite its importance for the global cycling of carbon, there are still large gaps in our understanding of the processes driving annual and seasonal carbon fluxes in the high-latitude Southern Ocean. This is due in part to a historical paucity of observations in this remote, turbulent, and seasonally ice-covered region. Here, we use autonomous biogeochemical float data spanning 6 full seasonal cycles and with circumpolar coverage of the Southern Ocean, complemented by atmospheric reanalysis, to construct a monthly climatology of the mixed layer budget of dissolved inorganic carbon (DIC). We investigate the processes that determine the annual mean and seasonal cycle of DIC fluxes in two different zones of the Southern Ocean—the Sea Ice Zone (SIZ) and Antarctic Southern Zone (ASZ). We find that, annually, mixing with carbon-rich waters at the base of the mixed layer supplies DIC which is, in the ASZ, either used for net biological production or outgassed to the atmosphere. In contrast, in the SIZ, where carbon outgassing and the biological pump are weaker, the surplus of DIC is instead advected northward to the ASZ. In other words, carbon outgassing in the southern Antarctic Circumpolar Current (ACC), which has been attributed to remineralized carbon from deep water upwelled in the ACC, is also due to the wind-driven transport of DIC from the SIZ. These results stem from the first observation-based carbon budget of the circumpolar Southern Ocean and thus provide a useful benchmark to evaluate climate models, which have significant biases in this region.

Sauvé, Jade↗

DOE OSTI2022

Evaluated 238 U(n,f) Average Prompt Fission Neutron Multiplicities Including the CGMF Model

This report documents an evaluation of the average prompt fission neutron multiplicity, $\overline{v}_p$, of 238 U from 800 keV to MeV. This evaluation had to be re-done from “scratch” as the input to previous $\overline{v}_p$ evaluations, specifically ENDF/B-VIII.0, was not found. That means that all available experimental data were re-analyzed and uncertainties were re-estimated. The new evaluated 238 U $\overline{v}_p$ based on only experimental data differs distinctly from ENDF/B-VIII.0 $\overline{v}_p$ from 2 to 4.5 MeV, and from 6 to 7 MeV, and is otherwise similar. The difference from 2 to 4.5 MeV stems from the fact that ENDF/B-VIII.0 was tweaked in this energy range to data of Frehaut, while two other, equally trustworthy, data sets would indicate an evaluated 238 U $\overline{v}_p$ that is up to 2% higher. Also, second chance fission in ENDF/B-VIII.0 was smoothed over from 6–7 MeV. Another major difference to ENDF/B-VIII.0 is that one of the evaluations presented here includes model information from the Hauser-Feshbach fission fragment decay code CGMF, while ENDF/B-VIII.0 is based purely on experimental data. CGMF links several fission quantities with each other; $\overline{v}_p$ is predicted by assumptions made on, e.g., pre-neutron emission yields as a function of mass, the total kinetic energy, or spin and parity of fission fragments. This allows to validate the new 238 U $\overline{v}_p$ by using CGMF parameters obtained from fitting to experimental 238 U $\overline{v}_p$ to predict yields as a function of mass, the average total kinetic energy, or the mean energy of the prompt fission neutron spectrum. These model-predicted values can then be compared to experimental and evaluated data. The model-predicted fission-observable values using evaluated parameters obtained here are reasonably close to experimental data for some observables, but are farther away from experimental data related to TKE observables. In addition to that, the evaluated 238 U(n,f) $\overline{v}_p$ shows similar deviations from ENDF/B-VIII.0 as for the evaluation with only experimental data. This difference is expected to lead to changes in simulated effective neutron multiplication factor, $k_{eff}$ of ICSBEP critical assemblies that are sensitive to 238 U in the fast range (BigTen, Flattop, Flattop-Pu). These changes in $k_{eff}$ need to be counter-balanced. Chi-Nu PFNS experimental data are expected to be released in the next few months that might lead to the needed changes in the PFNS. Until then, we hold off in benchmarking the new 238 U(n,f) $\overline{v}_p$ as well as submitting it to ENDF/B-VIII.1. Also, new high-precision 238 U $\overline{v}_p$ are expected to be measured by the CEA in the next two years that will shed further light on question on 238 U $\overline{v}_p$ from 2–4.5 and 6–7 MeV.

238U↗

DOE OSTI2021

Disease modeling for Mucopolysaccharidosis type IIIB using patient derived induced pluripotent stem cells

Highlights: • Establishment of a patient-specific neuronal model for Mucopolysaccharidosis type IIIB using iPSCs. • Lysosomes enlarged and secondary lipid accumulated in Mucopolysaccharidosis type IIIB iPSC-derived neuronal cells. • Recombinant NAGLU, δ-tocopherol, and HPBCD reduced the disease phenotypes in MPS IIIB iPSC-derived neuronal cells. Mucopolysaccharidosis type IIIB (MPS IIIB) is a lysosomal disease caused by mutations in the NAGLU gene encoding α-N-acetylglucosaminidase (NAGLU) which degrades heparan sulfate in lysosomes. Deficiency in NAGLU results in lysosomal accumulation of glycosaminoglycans (GAGs) and neurological symptoms. Currently, there is no effective treatment or cure for this disease. In this study, induced pluripotent stem cell lines were established from two MPS IIIB patient fibroblast lines and differentiated into neural stem cells and neurons. MPS IIIB neural stem cells exhibited NAGLU deficiency accompanied with GAG accumulation, as well as lysosomal enlargement and secondary lipid accumulation. Treatments with recombinant NAGLU, δ-tocopherol, and 2-hydroxypropyl-b-cyclodextrin significantly reduced the disease phenotypes in these cells. These results indicate the MPS IIIB neural stem cells and neurons have the disease relevant phenotype and can be used as a cell-based disease model system for evaluation of drug efficacy and compound screening for drug development.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2022

Analysis of ionizing radiation induced DNA damage response in human adult stem cells and differentiated neurons

Findings of neurodegenerative features associated with human radiosensitive syndromes such as Ataxia telangiectasia suggest that DNA repair efficiency is crucial for maintaining the functional integrity of central nervous system. To gain a better understanding of ionizing radiation (IR) induced DNA damage response in undifferentiated and differentiated neural cell types and to evaluate the role of ATM in DNA double strand break (DSB) repair, an in vitro human neural cell differentiation model system was utilized in this study. As compared to adult stem cells, differentiated neurons displayed an attenuated DSB repair response (as judged by the persistence of 53BP1 foci) after IR exposure and the attenuation was even more pronounced in stem cells and neurons after suppression of ATM (Ataxia Telangiectasia Mutated) gene product suggesting the importance of ATM for an optimal DSB repair efficiency in human neural cell types. In corroboration with an attenuated DNA damage response, a sharp decline in the expression levels of several DSB repair genes was observed in neurons. Furthermore, our results suggest that cellular differentiation modulates the expression of several genes thereby compromising the DSB repair fidelity in post mitotic neurons. Further studies are required to verify whether or not ATM mediated exacerbation of DNA repair deficiency in differentiated neurons leads to neurodegeneration.

53 binding protein 1↗

DOE OSTI2024

Temperature-induced degradation of GaN HEMT: An in situ heating study

High-power electronics, such as GaN high electron mobility transistors (HEMTs), are expected to perform reliably in high-temperature conditions. This study aims to gain an understanding of the microscopic origin of both material and device vulnerabilities to high temperatures by real-time monitoring of the onset of structural degradation under varying temperature conditions. This is achieved by operating GaN HEMT devices in situ inside a transmission electron microscope (TEM). Electron-transparent specimens are prepared from a bulk device and heated up to 800 °C. High-resolution TEM (HRTEM), scanning TEM (STEM), energy-dispersive x-ray spectroscopy (EDS), and geometric phase analysis (GPA) are performed to evaluate crystal quality, material diffusion, and strain propagation in the sample before and after heating. Gate contact area reduction is visible from 470 °C accompanied by Ni/Au intermixing near the gate/AlGaN interface. Elevated temperatures induce significant out-of-plane lattice expansion at the SiNx/GaN/AlGaN interface, as revealed by geometry-phase GPA strain maps, while in-plane strains remain relatively consistent. Exposure to temperatures exceeding 500 °C leads to almost two orders of magnitude increase in leakage current in bulk devices in this study, which complements the results from our TEM experiment. The findings of this study offer real-time visual insights into identifying the initial location of degradation and highlight the impact of temperature on the bulk device’s structure, electrical properties, and material degradation.

36 MATERIALS SCIENCE↗