Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sample Calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Evaluation of B and W UO{sub 2}/ThO{sub 2} VIII Experimental Core: Criticality and Thermal Disadvantage Factor Analysis

In the framework of the OECD/NEA International Reactor Physics Experiment (IRPHE) Project, an evaluation of core VIII of the Babcock and Wilcox (B and W) Spectral Shift Control Reactor (SSCR), critical experiment program was performed. The SSCR concept, moderated and cooled by a variable mixture of heavy and light water, envisaged changing of the thermal neutron spectrum during the operation to encourage breeding and to sustain the core criticality. Core VIII contained 2188 fuel rods with 93% enriched UO{sub 2}-ThO{sub 2} fuel in a moderator mixture of heavy and light water. The criticality experiment and measurements of the thermal disadvantage factor were evaluated. Benchmark criticality results using different cross-section libraries are reported. ENDF/B-VI.6 calculation was run using the S(α, β) model based on ENDF/B-VI.3 data while ENDF/B-VII.0 and ENDF/BVII.1 used an S(α, β) model based on ENDF/B-VII.0 data. JEFF calculations were run using the S(α, β) model based on JEFF 3.1.1 data except for the aluminum isotope, for which the S(α, β) model was missing. The maximum absolute deviation from the benchmark model was obtained using the JEFF-3.1.1 cross sections while closer results were obtained using ENDF/ B-VII.0 and ENDF/B-VII.1. Only ENDF/B-VII.1 and ENDF/B-VII.0 results are inside the 3σ uncertainty band (+2.8σ and 2.4σ, respectively), having deviations on the order of 300 pcm. The maximum deviation is -827 pcm (-6.1σ), using JEFF.3.1.1. Sample calculations of the TDF benchmark were also performed, studying the effects of the main nuclear data libraries. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A Multi-Stage Wear Model for Grid-to-Rod Fretting of Nuclear Fuel Rods

The wear of fuel rod cladding against the supporting structures in the cores of pressurized water nuclear reactors (PWRs) is an important and potentially costly tribological issue. Grid-to-rod fretting (GTRF), as it is known, involves not only time-varying contact conditions, but also elevated temperatures, flowing hot water, aqueous tribo-corrosion, and the embrittling effects of neutron fluences. The multi-stage, closed-form analytical model described in this paper relies on published out-of-reactor wear and corrosion data and a set of simplifying assumptions to portray the conversion of frictional work into wear depth. The cladding material of interest is a zirconium-based alloy called Zircaloy-4, and the grid support is made of a harder and more wear-resistant material. Focus is on the wear of the cladding. The model involves an incubation stage, a surface oxide wear stage, and a base alloy wear stage. The wear coefficient, which is a measure of the efficiency of conversion of frictional work into wear damage, can change to reflect the evolving metallurgical condition of the alloy. Wear coefficients for Zircaloy-4 and for a polyphase zirconia layer were back-calculated for a range of times required to wear to a critical depth. Inputs for the model, like the friction coefficient, are taken from the tribology literature in lieu of in-reactor tribological data. Concepts of classical fretting were used as a basis, but are modified to enable the model to accommodate the complexities of the PWR environment. Factors like grid spring relaxation, pre-oxidation of the cladding, multiple oxide phases, gap formation, impact, and hydrogen embrittlement are part of the problem definition but uncertainties in their relative roles limits the ability to validate the model. Sample calculations of wear depth versus time in the cladding illustrate how GTRF wear might occur in a discontinuous fashion during months-long reactor operating cycles. A means to account for grid/rod gaps and repetitive impact effects on GTRF wear is proposed

fretting↗

Residual entropy of ice III from Monte Carlo simulation

We calculated the residual entropy of ice III as a function of the occupation probabilities of hydrogen positions α and β assuming equal energies of all configurations. To do this, a discrete ice model with Bjerrum defect energy penalty and harmonic terms to constrain the occupation probabilities was simulated by the Metropolis Monte Carlo method for a range of temperatures and sizes followed by thermodynamic integration and extrapolation to N = ∞. Similarly as for other ices, the residual entropies are slightly higher than the mean-field (no-loop) approximation. However, the corrections caused by fluctuation of energies of ice samples calculated using molecular models of water are too large for accurate determination of the chemical potential and phase equilibria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A reduced-scaling density matrix-based method for the computation of the vibrational Hessian matrix at the self-consistent field level

An analytical method to calculate the molecular vibrational Hessian matrix at the self-consistent field level is presented. By analysis of the multipole expansions of the relevant derivatives of Coulomb-type two-electron integral contractions, we show that the effect of the perturbation on the electronic structure due to the displacement of nuclei decays at least as r{sup −2} instead of r{sup −1}. The perturbation is asymptotically local, and the computation of the Hessian matrix can, in principle, be performed with O(N) complexity. Our implementation exhibits linear scaling in all time-determining steps, with some rapid but quadratic-complexity steps remaining. Sample calculations illustrate linear or near-linear scaling in the construction of the complete nuclear Hessian matrix for sparse systems. For more demanding systems, scaling is still considerably sub-quadratic to quadratic, depending on the density of the underlying electronic structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Predicted aboveground biomass of Typha angustifolia in an upland brackish tidal marsh, PIE LTER, Byfield, MA (2022-2024)

This dataset contains predicted monthly aboveground Typha angustifolia biomass per sample and per square meter in a brackish tidal marsh site dominated by Typha angustifolia near the Parker River in the upper estuary of the Plum Island Sound, Massachusetts (MA) during the growing seasons (May-September) of 2022, 2023, and 2024. This site is also located within the Plum Island Ecosystems Long Term Ecological Research Station (PIE LTER). Allometric equations were developed from dry weight data and associated maximum heights collected in 2022 and 2023. The goal of this study was to investigate the difference in aboveground biomass between the site’s marsh interior (MI) and the creek bank (CB). Metadata files (Typha_biomass_predictions_dd.csv and Typha_biomass_predictions_flmd.csv) contain detailed information on variable definitions, calculations, sampling methods, and the location of the site.

DATE↗

DEVELOPMENT OF AN ANTIFOAM TRACKING SYSTEM AS AN OPTION TO SUPPORT THE MELTER OFF-GAS FLAMMABILITY CONTROL STRATEGY AT THE DWPF

The Savannah River National Laboratory (SRNL) has been working with the Savannah River Remediation (SRR) Defense Waste Processing Facility (DWPF) in the development and implementation of an additional strategy for confidently satisfying the flammability controls for DWPF’s melter operation. An initial strategy for implementing the operational constraints associated with flammability control in DWPF was based upon an analytically determined carbon concentration from antifoam. Due to the conservative error structure associated with the analytical approach, its implementation has significantly reduced the operating window for processing and has led to recurrent Slurry Mix Evaporator (SME) and Melter Feed Tank (MFT) remediation. To address the adverse operating impact of the current implementation strategy, SRR issued a Technical Task Request (TTR) to SRNL requesting the development and documentation of an alternate strategy for evaluating the carbon contribution from antifoam. The proposed strategy presented in this report was developed under the guidance of a Task Technical and Quality Assurance Plan (TTQAP) and involves calculating the carbon concentration from antifoam based upon the actual mass of antifoam added to the process assuming 100% retention. The mass of antifoam in the Additive Mix Feed Tank (AMFT), in the Sludge Receipt and Adjustment Tank (SRAT), and in the SME is tracked by mass balance as part of this strategy. As these quantities are monitored, the random and bias uncertainties affecting their values are also maintained and accounted for. This report documents: 1) the development of an alternate implementation strategy and associated equations describing the carbon concentration from antifoam in each SME batch derived from the actual amount of antifoam introduced into the AMFT, SRAT, and SME during the processing of the batch. 2) the equations and error structure for incorporating the proposed strategy into melter off-gas flammability assessments. Sample calculations of the system are also included in this report. Please note that the system developed and documented in this report is intended as an alternative to the current, analytically-driven system being utilized by DWPF; the proposed system is not intended to eliminate the current system. Also note that the system developed in this report to track antifoam mass in the AMFT, SRAT, and SME will be applicable beyond just Sludge Batch 8. While the model used to determine acceptability of the SME product with respect to melter off-gas flammability controls must be reassessed for each change in sludge batch, the antifoam mass tracking methodology is independent of sludge batch composition and as such will be transferable to future sludge batches.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Molecular Mechanisms Underlying Surfactant-Based Plastics De-Inking

Surfactant-mediated binder removal is critical for de-inking pretreatment in plastics recycling, yet the molecular mechanisms governing surfactant performance remain poorly understood. We used all-atom (AA) and coarse-grained (CG) molecular dynamics (MD) simulations alongside alkaline surfactant washing experiments to investigate interactions between a series of surfactants and a polyether urethane (PEU) binder in solution and on a polyethylene (PE) surface. Experiments reveal a range of de-inking efficiencies, ranging from <25 to >95% depending upon surfactant headgroup charge and tail length. AA simulations reveal that charged surfactants reach stable levels of surfactant coverage, while nonionic surfactants aggregate on the binder. CG umbrella sampling calculations quantify the thermodynamics of binder desorption in water. In ∼0.25 M surfactant solutions, up to a 52% reduction in the free energy barrier is computed, with trends in good agreement (R 2 = 0.92, Pearson’s r = –0.96, Spearman’s ρ = –0.83) with experimental de-inking efficiencies. We find that charged surfactants are more effective than nonionic surfactants for de-inking and propose three regimes of surfactant de-inking processes: good de-inking occurs in surfactants that promote PEU desorption with a low radius of gyration (R g ); moderate de-inking occurs when surfactants stabilize PEU but increase R g ; poor de-inking occurs in surfactants that aggregate on the binder and promote extensive anchoring to the surface. Overall, these molecular-level insights have the potential to guide the design of surfactant formulations for plastics recycling applications.

ink removal↗

MPMC and MCMD: Free High-Performance Simulation Software for Atomistic Systems

Advancements in parallel computing and hardware have allowed computational exploration of chemical systems of interest with unprecendented accuracy and efficiency. The typical development of molecular simulation software is initially inspired by a particular scientific inquiry. The softwares presented herein, MPMC (Massively Parallel Monte Carlo) and MCMD (Monte Carlo/Molecular Dynamics) were born out of a pursuit to simulate condensed phase physical and chemical interactions in porous materials. MPMC first began in 2005 and has been used for dozens of published results in the literature but has not yet been introduced in a standalone paper. MCMD is a more recent expansion and re-write with some published work, focused on adding molecular dynamics algorithms for transport and other time-dependent properties of chemical systems. Each software functions as a standalone with some unique and other overlapping features. Here, a driving aim of this work is to consider periodic, long-range polarization effects in classical simulation, and both codes are optimized to perform such calculations. Sample results will be presented which highlight methodically that inclusion of explicit polarization produces simulation results with predictive power which in general are in greater agreement with experiment than non-polarizable analogous simulations.

97 MATHEMATICS AND COMPUTING↗

Determining HPGe Total Detection Efficiency Using γ–γ Coincidence

Abstract Both the peak and total detection efficiencies are generally needed in order to calculate sample activity from a gamma spectroscopic measurement, except in the case of isotope specific calibration. This is particularly true when the sample is in close proximity to the detector and corrections for cascade summing effects are required to avoid significant inaccuracy in the result. These corrections use the total detection efficiency to correct for summing-in and summing-out events, and the extent of the correction depends on both the geometry and the gamma cascade for the isotope in question. Experimentally determining the total efficiency is a labor intensive endeavor requiring multiple measurements with a set of single-gamma-emitting standards. Modeling the total efficiency vs. energy may be less time consuming, but is also likely to produce less confidence in the final result. Pacific Northwest National Laboratory's Radiation Detection and Nuclear Sciences group has constructed a low background 14-crystal HPGe array for sample measurement; in all measurements, samples will be in close proximity to the germanium crystals. This close geometry and the sheer number efficiency calibrations required for the system have led us to investigate methods to simplify the efficiency calibration procedure. One method we are developing uses the Y-Y coincidence plane to isolate Compton scattering event populations, allowing experimental determination of total detection efficiency values from the measurement of a single mixed isotope standard. A description of the analysis and experimental results of this method are presented.

low background HPGe High Purity Germanium detector↗

Rietveld refinement and dielectric relaxation of a new rare earth based double perovskite oxide: BaPrCoNbO{sub 6}

A new rare earth based double perovskite oxide barium praseodymium cobalt niobate, BaPrCoNbO{sub 6} (BPCN) is synthesized by solid-state reaction technique. Rietveld analysis of X-ray diffraction (XRD) data shows that the compound crystallizes in a perovskite like tetragonal structure which belongs to the I4/mmm space group with lattice parameters a=b=5.6828(9) Å, c=8.063(2) Å. Structural analysis reveals 1:1 ordered arrangement for the Co{sup 2+} and Nb{sup 5+} cations over the six-coordinate B-sites of BPCN. The superlattice line (1 0 1) at 2θ=19.10° arising from the alternate ordering of Co{sup 2+} and Nb{sup 5+} sites is observed in the XRD pattern which confirms the presence of cation ordering in BPCN. Fourier transform infrared spectrum shows two phonon modes of the sample due to the antisymmetric NbO{sub 6} stretching vibration. The relaxation dynamics of the conductive process in BPCN is investigated in the temperature range 303 to 503 K and in the frequency range 100 Hz to 1 MHz using impedance spectroscopy. The relaxation mechanism of the sample in the framework of electric modulus formalism is modeled by Davidson–Cole model (DCM). The values of α (distribution of relaxation time) for the DCM varies from 0.1 to 0.3 which suggests the asymmetric distribution of relaxation time for BPCN. The activation energy of the sample, calculated from both conductivity and modulus spectra, are found to be almost the same ∼0.4 eV, which indicates that the conduction mechanism for BPCN is polaron hopping. The scaling behaviour of the imaginary part of electric modulus suggests that the relaxation follows the same mechanism at various temperatures. - Graphical abstract: Rietveld refinement plot for BPCN. Inset shows the schematic presentation of the BPCN tetragonal unit cell. The Co{sup 2+} atoms are located at the centers of the CoO{sub 6} (blue) octahedra. The Nb{sup 5+} atoms are located at the centers of the NbO{sub 6} (green) octahedra. Display Omitted - Highlights: • BaPrCoNbO{sub 6} is synthesized for the first time. • Rietveld refinement of XRD data confirms tetragonal phase. • XRD confirms the presence of cation ordering in BaPrCoNbO{sub 6}. • The activation energy is ∼0.4 eV. • The conduction mechanism for BPCN is due to polaron hopping.

36 MATERIALS SCIENCE↗

In-depth quantitative analysis of the microstructures produced by Surface Mechanical Attrition Treatment (SMAT)

Electron BackScattered Diffraction (EBSD) maps are used to characterize quantitatively the graded microstructure formed by Surface Mechanical Attrition Treatment (SMAT) and applied here to the 316L stainless steel. In particular, the analysis of GNDs – coupled with relevant and reliable criteria – was used to depict the thickness of each zone identified in the SMAT-affected layers: (i) the “ultrafine grain” (UFG) zone present at the extreme top surface, (ii), the “transition zone” where grains were fragmented under the heavy plastic deformation and, finally, (iii) the “deformed zone” where initial grains are simply deformed. The interest of this procedure is illustrated through the comparative analysis of the effect of some SMAT processing parameters (amplitude of vibration and treatment duration). The UFG and transition zones are more significantly modified than the overall affected thickness under our tested conditions. - Highlights: • EBSD maps are used to characterize quantitatively the microstructure of SMAT treated samples. • Calculation of the GND density to quantify strain gradients • A new method to depict the different zone thicknesses in the SMAT affected layer • Effects of SMAT processing parameters on the surface microstructure evolution.

36 MATERIALS SCIENCE↗

Differential Membrane Binding Mechanics of Synaptotagmin Isoforms Observed in Atomic Detail

Synaptotagmin (Syt) is a membrane-associated protein involved in vesicle fusion through the SNARE complex that is found throughout the human body in 17 different isoforms. These isoforms have two membrane-binding C2 domains, which sense Ca 2+ and thereby promote anionic membrane binding and lead to vesicle fusion. Through molecular dynamics simulations using the HMMM acclerated bilayer model, we have investigated how small protein sequence changes in the Ca 2+ binding loops of the C2 domains may give rise to the experimentally determined difference in binding kinetics between Syt-1 and Syt-7 isoforms. Syt-7 C2 domains are found to form more close contacts with anionic phospholipid head groups, particularly in Loop 1, where an additional positive charge in Syt-7 draws the loop closer to the membrane and causes the anchoring residue F167 to insert deeper into the bilayer than the corresponding methionine in Syt-1 (M173). By carrying out additional replica exchange umbrella sampling calculations, we demonstrate that these additional contacts increase the energetic cost of unbinding the Syt-7 C2 domains from the bilayer, causing them to unbind more slowly than their counterparts in Syt-1.

59 BASIC BIOLOGICAL SCIENCES↗

Growth and characterization of ZnSe nanoparticles

ZnSe nanoparticles were prepared using a chemical bath deposition technique. X-ray diffraction study shows that the ZnSe crystallizes in the cubic phase. The crystallite size of the ZnSe samples calculated using the Scherrer’s formula was found to be slightly smaller than the Bohr exciton radius of bulk ZnSe. SEM studies show the growth of a mixture of nanorods and spherical nanoparticles. EDAX analysis confirms that the synthesized ZnSe nanoparticles are of good stiochiometry. Optical studies show the blue shift in the absorption edge for ZnSe nanoparticles caused by quantum confinement.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study of ZnO and Mg doped ZnO nanoparticles by sol-gel process

Nano-crystalline undoped and Mg doped ZnO (Mg-ZnO) nanoparticles with compositional formula Mg{sub x}Zn{sub 1-x}O (x=0,1,3,5,7,10 and 12 %) were synthesized using sol-gel process. The XRD diffraction peaks match with the pattern of the standard hexagonal structure of ZnO that reveals the formation of hexagonal wurtzite structure in all samples. SEM images demonstrates clearly the formation of spherical ZnO nanoparticles, and change of the morphology of the nanoparticles with the concentration of the magnesium, which is in close agreement with that estimated by Scherer formula based on the XRD pattern. To investigate the doping effect on optical properties, the UV–VIS absorption spectra was obtained and the band gap of the samples calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mobility of edge dislocations in stressed iron crystals during irradiation

The behavior of a/2(111)(110) edge dislocations in iron in shear loading and irradiation conditions was studied by means of molecular dynamics simulation. Edge dislocations were exposed to shock waves formed by atomic displacement cascades of different energies. It was shown that starting from a certain threshold amplitude shock waves cause displacement of edge dislocations in the loaded samples. Calculations showed that the larger the shear load and the amplitude of the shock wave, the greater the displacement of dislocations in the crystallite.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulation of the Nondestructive Assay of 237 Np Using Active Neutron Multiplicity Counting

In this work, the epithermal neutron multiplicity counter (ENMC) and an organic scintillator mul- tiplicity counter (OSMC) are compared in the assay of 237 Np, a potentially weapons-usable isotope, using active neutron multiplicity counting. In active neutron multiplicity counting, the neutron doubles and triples multiplicity rates are used to analytically calculate sample mass. To distinguish the masses of two different samples, the measured triples and doubles rates of each sample must be separated by one standard deviation. Here, the time it takes each system to separate the measured triples multiplicity rates was compared using 20 metal samples of 237 Np with masses logarithmi- cally distributed between 10 and 1000 g. The results show that the OSMC can distinguish the smallest masses (10.0 and 12.7 g) beyond one standard deviation in 20 minutes, and the ENMC requires more than 400 times the measurement time to obtain the same precision. Similarly, the OSMC is at least 4.5 times faster than the ENMC in separating the doubles multiplicity rates.

42 ENGINEERING↗

Benchmark of the Chlorine Worth Study Experiments in Support of Chlorine Nuclear Data Validation for Nuclear Criticality Safety

The Chlorine Worth Study (CWS) was a critical experiment to address an urgent need for thermal chlorine nuclear data validation in plutonium systems. This urgent need is tied directly to plutonium recycle and recovery operations in the plutonium facility at Los Alamos National Laboratory, where exceptionally conservative criticality safety limits are used because no credit is taken for the neutron capture by chlorine. The experiment used weapons-grade plutonium metal plates clad in stainless steel, known as the PANN (plutonium aluminum no nickel) ZPPR (zero power physics reactor) plates. The plutonium was reflected and moderated by high-density polyethylene and included combinations of polyvinyl chloride (PVC) and chlorinated polyvinyl chloride (CPVC) as absorbers. The experiment and benchmark included three configurations mimicking 30 g 239 Pu/L plutonium, 300 g 239 Pu/L plutonium, and 600 g 239 Pu/L plutonium in an aqueous chloride solution. Uncertainties in the benchmark included five broad categories: (1) criticality measurement, (2) mass and density, (3) dimensions, (4) material compositions, and (5) positioning. The largest contribution to the overall uncertainties for all three cases came from the material compositions, in particular the PVC and CPVC absorber compositions. A detailed model was created to be a near match (that is within expectations of transport code users) and a simplified model was created to minimize offset dimensions and expedite modeling for code validation. Sample calculations were completed in MCNP6.3 with ENDF/B-VIII.0 and ENDF/B-VII.1 nuclear data. For the detailed and simplified models, the average difference between the computed and experimental k eff was 951 pcm. CWS will serve as the key validation experiment for nuclear criticality safety in support of aqueous chloride operations. The sensitivity to the chlorine capture cross section is orders of magnitude greater than other existing benchmarks. The current limits, as defined by nuclear criticality safety, are 520 g Pu per batch, i.e. the minimum critical mass of the Pu solution infinitely reflected by water [Criticality Handbook: Volume II, (1969)]. This extremely conservative critical mass limit does not credit any neutron capture by chlorine (in particular neutron capture by 35 Cl) and greatly impedes the throughput required for current and future operations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

First principles Peierls-Boltzmann phonon thermal transport: A topical review

The advent of coupled thermal transport calculations with interatomic forces derived from density functional theory has ushered in a new era of fundamental microscopic insight into lattice thermal conductivity. Subsequently, significant new understanding of phonon transport behavior has been developed with these methods, and because they are parameter free and successfully benchmarked against a variety of systems, they also provide reliable predictions of thermal transport in systems for which little is known. This topical review will describe the foundation from which first principles Peierls-Boltzmann transport equation methods have been developed, and briefly describe important necessary ingredients for accurate calculations. Sample highlights of reported work will be presented to illustrate the capabilities and challenges of these techniques, and to demonstrate the suite of tools available, with an emphasis on thermal transport in micro- and nano-scale systems. In conclusion, future challenges and opportunities will be discussed, drawing attention to prospects for methods development and applications.

74 ATOMIC AND MOLECULAR PHYSICS↗