Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sedimentary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Erodibility of Microbial mats and the Implications for Preservation of Microbially Induced Sedimentary Structures (MISS)

Microbial induced sedimentary structures (MISS) are frequently discussed as potential astrobiological markers on Mars and other planetary bodies[1,2,3]. The presence of fossilized microbial mat structures from the Archaean demonstrates the ability of microbial mats to remain preserved for billions of years[3,4,5].To be preserved microbial mats must survive erosion to be buried in their depositional environment[5]. Erosion of mats is typically due to water, but mats also exist in aeolian environments where wind is a dominant a gent of erosion. The susceptibility of microbial mats to erosion due to aeolian a nd subaqueous sediment transport has important implications for understanding the distribution a nd preservation of potential biological materials on the surface of Mars, Titan, a nd the early Earth. Here we measure the erodibility of microbial m a t s by water a nd wind using field experiments on hyper-saline tidal flats at Padre Island, Texas. The sandy sedimentary environment of Padre Island is a promising astrobiological analogue for Mars and Titan.

K R Fisher↗

Reactive Transport and Mass Balance Modeling of the Stimson Sedimentary Formation and Altered Fracture Zones Constrain Diagenetic Conditions at Gale Crater, Mars

On a planet as cold and dry as present-day Mars, evidence of multiple aqueous episodes offers an intriguing view into very different past environments. Fluvial, lacustrine, and eolian depositional environments are being investigated by the Mars Science Laboratory Curiosityin Gale crater, Mars. Geochemical and mineralogical observations of these sedimentary rocks suggest diagenetic processes affected the sediments. Here, we analyze diagenesis of the Stimson formation eolian parent material, which caused loss of olivine and formation of magnetite. Additional, later alteration in fracture zones resulted in preferential dissolution of pyroxene and precipitation of secondary amorphous silica and Ca sulfate. The ability to compare the unaltered parent material with the reacted material allows constraints to be placed on the characteristics of the altering solutions. In this work we use a combination of a mass balance approach calculating the fraction of a mobile element lost or gained, τ, with fundamental geochemical kinetics and thermodynamics in the reactive transport code CrunchFlow to examine the characteristics of multiple stages of aqueous alteration at Gale crater, Mars. Our model results indicate that early diagenesis of the Stimson sedimentary formation is consistent with leaching of an eolian deposit by a near-neutral solution, and that formation of the altered fracture zones is consistent with a very acidic, high sulfate solution containing Ca, P and Si. These results indicate a range of past aqueous conditions occurring at Gale crater, Mars, with important implications for past Martian climate and environments.

Gale crater↗

Stratigraphic Change from Ca-Sulfate to Mg-Sulfate in the Sedimentary Bedrock of Gale Crater, Mars: Recent Results from Curiosity’s APXS

Curiosity’s APXS instrument has been quantifying sulfates over >30 km of traverse in Gale crater. The rover recently arrived at sedimentary strata where orbital data predicted hydrated Mg-sulfates that may record a change to a drier paleoenvironment. The sequence of strata is in the Marker Band Valley (MBV), the ~10-m-thick, metal-rich Marker Band (MB), and strata above the MB. Here, we report recent sulfate observations by the APXS and provide constraints on the occurrence of Mg-sulfate and the implications for paleoenvironment interpretations. In sedimentary strata below the MBV, Mg-sulfate enrichment (~5-10 wt%) is generally limited to larger diagenetic nodules (~1-3 cm). Ca is positively correlated with S at proportions consistent with Ca-sulfate addition to the bedrock matrix. S variation is thus controlled primarily by Ca-sulfate, which increases ~30% in transitional units below the MBV. The MBV contains the first evidence of Mg-sulfate enrichment in the bedrock matrix, confirmed by the detection of crystalline Mg-sulfate by CheMin. The MBV bedrock has the same overall bulk composition as the underlying Mt. Sharp gp. strata, but with an additional ~5-15 wt% Mg-sulfate. The MB has contrasting sulfate content: (1) targets with very high concentrations of MnO (1.5 wt%), FeO (47 wt%), and Zn (2.2 wt%) are depleted in S and (2) targets with lower metal content have evidence of Mg-sulfate addition. Strata above the MB have a bulk composition that is distinct from other rocks in Gale. For example, the bedrock has molar Fe/Mn (50-60) and Cr/Ti (0.4-0.7) similar to basaltic soil, but ~3X higher Zn and high Ge (50 ppm). Median SO3 above the MB (15 wt%) is higher than the MBV (14 wt%) as well as strata below the MBV (~8 wt%). S does not correlate with Ca or Mg above the MBV. MgO (~9 wt%) is higher than below the MBV (~5 wt%) and the SO3/MgO (1.7) is in the same range as the Mg-sulfate-bearing MBV, suggesting Mg-sulfate enrichment. APXS data indicate that the MBV and above the MB preserve a relatively sharp vertical transition (~5-10 m) from Ca-sulfate to Mg-sulfate in the rock matrix. The sharp contacts with the sulfate-depleted MB and the notable change in bulk composition above the MB may indicate a complex depositional and/or diagenetic history under conditions where enrichments in the highly soluble Mg-sulfates were ultimately preserved.

Jeffrey Allan Berger↗

Remote sensing of some sedimentary rocks.

Sedimentary rocks including varying sized clastics and carbonates were overflown by aircraft between 1966 and 1971 producing data in the ultraviolet to microwave regions of the electromagnetic spectrum. This paper reports that multispectral analysis increases the ease and rapidity of discrimination of rock types having subtle differences in physical characteristics, but fails to enhance and may degrade distinctions where physical characteristics are significantly different. Brief resumes of color and color IR photographic data are presented. Thermal infrared is found to be useful in the mapping of rock units, but limitations such as moisture variation, soil cover, and vegetation may exceed in one formation the distinction between differing lithologies. A brief review of previously published SLAR data is included for completeness. Remote sensing techniques should reduce field geological effort by as much as 50%.

Brennan, P. A.↗

Capability of ERTS-1 imagery to investigate geological and structural features in a sedimentary basin (Bassin Parisien, France)

A preliminary study of the MSS imagery of a sedimentary basin whose structure is regular is reported. Crops and natural vegetation are distributed all over the site located under temperate climate. Ground data available concern plant species geology and tectonic and are correlated with results from ERTS 1 imagery. This comparison shows a good correlation. The main geological units are detected or enhanced by way of agricultural land use and/or natural vegetation. Alluvial deposits are outlined by vegetation grass land and poplar trees. Some spatial relationship of geostructures, suspected until now, are identified or extended in associating results from different spectral bands.

Cavelier, C.↗

An analysis of fracture trace patterns in areas of flat-lying sedimentary rocks for the detection of buried geologic structure

Two study areas in a cratonic platform underlain by flat-lying sedimentary rocks were analyzed to determine if a quantitative relationship exists between fracture trace patterns and their frequency distributions and subsurface structural closures which might contain petroleum. Fracture trace lengths and frequency (number of fracture traces per unit area) were analyzed by trend surface analysis and length frequency distributions also were compared to a standard Gaussian distribution. Composite rose diagrams of fracture traces were analyzed using a multivariate analysis method which grouped or clustered the rose diagrams and their respective areas on the basis of the behavior of the rays of the rose diagram. Analysis indicates that the lengths of fracture traces are log-normally distributed according to the mapping technique used. Fracture trace frequency appeared higher on the flanks of active structures and lower around passive reef structures. Fracture trace log-mean lengths were shorter over several types of structures, perhaps due to increased fracturing and subsequent erosion. Analysis of rose diagrams using a multivariate technique indicated lithology as the primary control for the lower grouping levels. Groupings at higher levels indicated that areas overlying active structures may be isolated from their neighbors by this technique while passive structures showed no differences which could be isolated.

Podwysocki, M. H.↗

Beryllium-10 in Australasian tektites - Evidence for a sedimentary precursor

Each of seven Australasian tektites contains about 100 micron atoms of beryllium-10 (half-life, 1.53 million years) per gram. Cosmic-ray bombardment of the australites cannot have produced the measured amounts of beryllium-10 either at the earth's surface or in space. The beryllium-10 contents of these australites are consistent with a sedimentary precursor that adsorbed from precipitation beryllium-10 produced in the atmosphere. The sediments must have spent several thousand years at the earth's surface within a few million years of the tektite-producing event.

Pal, D. K.↗

Sedimentary processes and crustal cycling on Venus

Sediment exists on the Venus surface. It is observed in Venera images between outcrops and boulders of sedimentary rocks. Sediment is produced by pyroclastic volcanism and chemical weathering. Chemical weathering is driven by an enhanced activity of water and an elevated surface temperature. Sediment is transported by wind action and lithified by cementration and diagenesis. Cementation may be by carbonate or silica cement; diagenesis may be products of chemical weathering acting as cement, or by compaction and recrystallization of sediment into a texture with interlocking grains. Sediment may be transported from the top of sialic continents (such as Ishtar) to the modal plains where it is deposited, lithified, and integrated into thy local crust. As new layers are added, the bottom of the crust melts and is, in part, returned to the mantle. A steady-state chemical exchange might exist by this mechanism of crustal cycling that links atmosphere, continents, modal plains, and mantle.

Warner, J. L.↗

Rare earth elements in the sedimentary cycle - A pilot study of the first leg

The effects of source rock composition and climate on the natural abundances of rare elements (REE) in the first leg of the sedimentary cycle are evaluated using a study with Holocene fluvia sands. The medium grained sand fraction of samples collected from first order streams exclusively draining granitic plutons in Montana (semi-arid), Georgia (humid), and South Carolina (humid) are analyzed. It is found that the REE distribution patterns (but not the total absolute abundances) of the daughter sands are very similar, despite compositional differences between parent plutons. Averages of the three areas are determined to have a La/Lu ratio of about 103, showing a depletion of heavy REE with respect to an average granite (La/Lu = 79) or the composition of North American Shales (La/Lu = 55). However, the Eu/Sm ratio in sands from these areas is about 0.22, which is very close to this ratio in North American Shales (0.21), although the overall REE distribution of these sands is not similar to that of the North American Shales in any way. It is concluded that the major rock type, but neither its minor subdivisions nor the climate, controls the REE distribution patterns in first cycle daughter sands, although the total and the parent rock-normalized abundances of REE in sands from humid areas are much lower than those in sands from arid areas.

Basu, A.↗

Report of the Workshop on Geologic Applications of Remote Sensing to the Study of Sedimentary Basins

The Workshop on Geologic Applications of Remote Sensing to the Study of Sedimentary Basins, held January 10 to 11, 1985 in Lakewood, Colorado, involved 43 geologists from industry, government, and academia. Disciplines represented ranged from vertebrate paleontology to geophysical modeling of continents. Deliberations focused on geologic problems related to the formation, stratigraphy, structure, and evolution of foreland basins in general, and to the Wind River/Bighorn Basin area of Wyoming in particular. Geological problems in the Wind River/Bighorn basin area that should be studied using state-of-the-art remote sensing methods were identified. These include: (1) establishing the stratigraphic sequence and mapping, correlating, and analyzing lithofacies of basin-filling strata in order to refine the chronology of basin sedimentation, and (2) mapping volcanic units, fracture patterns in basement rocks, and Tertiary-Holocene landforms in searches for surface manifestations of concealed structures in order to refine models of basin tectonics. Conventional geologic, topographic, geophysical, and borehole data should be utilized in these studies. Remote sensing methods developed in the Wind River/Bighorn Basin area should be applied in other basins.

Lang, H. R.↗

Use of laboratory simulated pyrolysis in tracing the history of sedimentary organic matter

Results from laboratory simulated pyrolyses experiments show that in addition to depth of burial, preservation of kerogen, and hence any morphologic structure in it, is also dependent on the mineral matrix with which it is associated. In the presence of clay minerals, and especially under dry conditions, extractable lipids released during kerogen decomposition are more rapidly destroyed than in the presence of calcite or chert matrices. The result is production of gas, polar bitumen and pyrobitumen and destruction of biomarkers. During such an early reorganization of the kerogen, the biomarker constituents can be destroyed, or unrecognizably altered. The above process of organic residues maturation appears to be inhibited in the presence of water and is significantly reduced where kerogen is hosted in limestones, dolomites or cherts. These minerals have been characteristically found to be the most reliable in yielding morphological fossils and small quantities of extractable bitumen in Archean and Proterozoic rocks. To understand the validity of chemical and morphological fossils, in the early geologic record, it will be necessary to understand the process of kerogen in sedimentary rocks. To test the role of various minerals on the preservation process, kerogen extracted from a variety of rocks has been heated together with montmorillonite, illite and calcite. The kinetics of the process has been monitored and the products quantitatively identified.

Kaplan, I. R.↗

Archean sedimentary styles and early crustal evolution

The distinctions between and implications of early and late Archean sedimentary styles are presented. Early Archean greenstone belts, such as the Barberton of South Africa and those in the eastern Pilbar Block of Australia are characterized by fresh or slightly reworked pyroclastic debris, orthochemical sediments such as carbonates, evaporites, and silica, and biogenic deposits including cherts and stromatolitic units. Terrigenous deposits are rare, and it is suggested that early Archean sediments were deposited on shallow simatic platforms, with little or no components derived from sialic sources. In contrast, late Archean greenstone belts in the Canadian Shield and the Yilgarn Block of Australia contain coarse terrigenous clastic rocks including conglomerate, sandstone, and shale derived largely from sialic basement. Deposition appears to have taken place in deepwater, tectonically unstable environments. These observations are interpreted to indicate that the early Archean greenstone belts formed as anorogenic, shallow water, simatic platforms, with little or no underlying or adjacent continental crust, an environment similar to modern oceanic islands formed over hot spots.

Lowe, D. R.↗

Lithologic discrimination of volcanic and sedimentary rocks by spectral examination of Landsat TM data from the Puma, Central Andes Mountains

The Central Andes are widely used as a modern example of noncollisional mountain-building processes. The Puna is a high plateau in the Chilean and Argentine Central Andes extending southward from the altiplano of Bolivia and Peru. Young tectonic and volcanic features are well exposed on the surface of the arid Puna, making them prime targets for the application of high-resolution space imagery such as Shuttle Imaging Radar B and Landsat Thematic Mapper (TM). Two TM scene quadrants from this area are analyzed using interactive color image processing, examination, and automated classification algorithms. The large volumes of these high-resolution datasets require significantly different techniques than have been used previously for the interpretation of Landsat MSS data. Preliminary results include the determination of the radiance spectra of several volcanic and sedimentary rock units and the use of the spectra for automated classification. Structural interpretations have revealed several previously unknown folds in late Tertiary strata, and key zones have been targeted to be investigated in the field. The synoptic view of space imagery is already filling a critical gap between low-resolution geophysical data and traditional geologic field mapping in the reconnaissance study of poorly mapped mountain frontiers such as the Puna.

Fielding, E. J.↗