Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shockwaves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Observations near the magnetopause at the onset of the July 29, 1977, sudden storm commencement

Characteristics of an earthward movement of the magnetopause caused by the arrival of an interplanetary shockwave are derived from data acquired by the GEOS 1 spacecraft on July 29, 1977. Data were taken on electric field, plasma, magnetic field, energetic particles, and composition before, during, and after leaving the magnetopause. Correlative examinations were made with information gathered by the IMP 7, IMP 8, and ATS 6 satellites. The magnetopause was found to move earthward at 95 km/sec and had a thickness of 500 km. The existence of three different regions is postulated, one with field lines connected directly to the earth, the magnetosphere, a second, the magnetosheath, with no magnetic field line connection to the earth, and a thir; with one end of the field lines connected to the earth and the other to the interplanetary medium, called the transition region.

Knott, K.↗
NASA NTRS1985

Acousto-optic Extensometer for Bolts

Bolt torque or tension deduced from non contacting measurements. Pulsed Laser induces shockwave in bolthead while continuous-wave acousto-optic detector monitors distortion produced by shock. Shock travel time measured to determine bolt length. Solid-state position detector relatively inexpensive and keeps down cost of extensometer.

Maram, J.↗
NASA NTRS1983

The COREL and W12SC3 computer programs for supersonic wing design and analysis

Two computer codes useful in the supersonic aerodynamic design of wings, including the supersonic maneuver case are described. The nonlinear full potential equation COREL code performs an analysis of a spanwise section of the wing in the crossflow plane by assuming conical flow over the section. A subsequent approximate correction to the solution can be made in order to account for nonconical effects. In COREL, the flow-field is assumed to be irrotional (Mach numbers normal to shock waves less than about 1.3) and the full potential equation is solved to obtain detailed results for the leading edge expansion, supercritical crossflow, and any crossflow shockwaves. W12SC3 is a linear theory panel method which combines and extends elements of several of Woodward's codes, with emphasis on fighter applications. After a brief review of the aerodynamic theory used by each method, the use of the codes is illustrated with several examples, detailed input instructions and a sample case.

Mason, W. H.↗
NASA NTRS1984

Simulation of blunt-fin-induced shock wave and turbulent boundary-layer interaction

A supersonic flow over a blunt fin mounted on a flat plate is numerically simulated. The fin shock causes the boundary layer to separate and results in a complicated, three-dimensional shockwave and boundary-layer interaction. The computed result is in good agreement with the measured pressure on the fin and the flat plate. The main features, such as peak pressure on the fin leading edge and a double peak pressure on the plate, are closely predicted. The role of the horseshoe vortex is discussed. The vortex leads to the development of high-speed flow, and, hence, low-pressure regions on the fin and the plate. Different thicknesses of the incoming boundary layer have been studied. Varying the thicknesses by an order of magnitude shows that the size of the horseshoe vortex and therefore the spatial extent of the interaction are inviscid-dominated, and are weakly dependent on the Reynolds number. Colored graphics are used to show details of the interaction flow field.

Hung, C.-M.↗
NASA NTRS1984

Large-scale Bubble Structure of the Intersteller Medium (ISM) and Properties of the Local Spiral Arm (LSA)

Bubbles which are very common structure units in the Galaxy and galaxies were examined. Collection of radio, optical, infrared and X-ray observations of the Cyg superbubble (CSB) region of the sky show that the CSB is not a single bubble object. Between 50 to 75 percent of its X-ray emission is ascribed to discrete sources. The other 25 to 50% X-ray emission, probably originates from bubbles around 8 OB associations of the region. All bubbles located within the spiral structure of Galaxy, M31 and M33 have diameter 300 pc. The large distance of stellar association from the galactic plane (GP) combined with picture of the gas distribution within the LSA shows that a Reyleigh-Taylor instability in the LSA can develop and give use to the formation of compact stellar clusters, such as the Cyg OB2 association. Development stages of the Reyleigh-Taylor instability, some peculiarities of the dust distribution and departures of the local structure from the galactic grand design suggest the absence of a spiral shockwave in the LSA.

Bochkarev, N. G.↗
NASA NTRS1985

High pressure cosmochemistry applied to major planetary interiors: Experimental studies

The measurement of equilibria in binary fluid-solid systems in diamond anvil cells, represents a major advance of the art of high-pressure experimentation. Vibrational spectroscopy, direct visual observations, and X-ray diffraction crystallography of materials confined in externally heated cells are the primary experimental probes being used. Adiabats in these systems are being measured in order to constrain models of heat flow in these bodies and to detect phase transitions by thermal anomalies. Other studies are directed toward interpreting high pressure reactions in these systems that are suggested by shockwave measurements, and developing methods for reaching high temperatures and high pressures of planetary interest in diamond cells. The overall objective of this project is to determine the properties of the H2-He-H2O-HN3-CH4 system and related small-molecule systems that are needed to constrain theoretical models of the interiors of the major planets.

Nicol, M. F.↗
NASA NTRS1986

High pressure cosmochemistry applied to major planetary interiors: Experimental studies

The overall goal of this project is to determine properties of the H-He-C-N-O system, as represented by small molecules composed of these elements, that are needed to constrain theoretical models of the interiors of the major planets. Much of our work now concerns the H2O-NH3 system. This project is the first major effort to measure phase equilibria in binary fluid-solid systems in diamond anvil cells. Vibrational spectroscopy, direct visual observations, and X-ray crystallography of materials confined in externally heated cells are our primary experimental probes. We also are collaborating with the shockwave physics group at Lawrence Livermore Laboratory in studies of the equation of state of a synthetic Uranus fluid and molecular composition of this and other H-C-N-O materials under planetary conditions.

Nicol, M. F.↗
NASA NTRS1986

Heat transfer in the stagnation region of the junction of a circular cylinder perpendicular to a flat plate

The heat transfer rate in the stagnation region of the junction of a circular cylinder perpendicular to a flat plate was measured for a range of Reynolds numbers varying from 3.0 x 10 to the 4th to 7.0 x 10 to the 5th and a flow Mach number of 0.14. The measurements were performed in a shock-tube facility using a reflected shockwave technique and thin-film platinum heat gages. The heat flux was measured for both the plate and the circular cylinder. A substantial increase in the heat transfer rate in the junction region was observed. The influence of the cylinder over the flat plate extended beyond 3/4 cylinder diameter for low Reynolds numbers. For high Reynolds numbers the maximum increase in the heat transfer rate was observed to be approximately 100 percent, but for very low Reynolds numbers a maximum increase in the heat flux to the plate by a factor of 5 was observed. The variations in the heat transfer rate to the stagnation point of the cylinder was very small.

Hinckel, J. N.↗
NASA NTRS1989

Compression Pylon Reduces Interference Drag

New design reduces total drag by 4 percent. Pylon reduces fuselage/wing/pylon/nacelle-channel compressibility losses without creating additional drag associated with other areas of pylon. Minimum cross-sectional area of channel occurs at trailing edge of wing. Velocity of flow in channel always nearly subsonic, reducing compressibility losses associated with supersonic flow. Flow goes past trailing edge before returning to ambient conditions, resulting in no additional drag to aircraft. Designed to compress flow beneath wing by reducing velocity in this channel, thereby reducing shockwave losses and providing increase in wing lift.

Patterson, James C., Jr.↗
NASA NTRS1990

Project HyBuJET

A conceptual Hypersonic Business Jet (HyBuJet) was examined. The main areas of concentration include: aerodynamics, propulsion, stability and control, mission profile, and atmospheric heating. In order to optimize for cruise conditions, a waverider configuration was chosen for the high lift drag ratio and low wave drag. The leading edge and lower surface of a waverider was mapped out from a known flow field and optimized for cruising at Mach 6 and at high altitudes. The shockwave generated by a waverider remains attached along the entire leading edge, allowing for a larger compression along the lower surface. Three turbofan ramjets were chosen as the propulsion of the aircraft due to the combination of good subsonic performance along with high speed propulsive capabilities. A combination of liquid silicon convective cooling for the leading edges with a highly radiative outer skin material was chosen to reduce the atmospheric heating to acceptable level.

Ramsay, Tom↗
NASA NTRS1991

Multiple shock-shock interference on a cylindrical leading edge

The details of an experimental study of shock wave interference heating on a cylindrical leading edge representative of the cowl of a rectangular hypersonic engine inlet are presented. This Mach 8 study has provided the first detailed pressure and heat transfer rate distributions on a cylinder resulting from a two-dimensional shockwave interference pattern created by two incident oblique shock waves intersecting the cylinder bow shock wave. The peak heat transfer rate was 38 times the undisturbed flow stagnation point level and occurred when the two oblique shock waves coalesced prior to intersecting the cylinder bow shock wave. Development of pressure deflection diagrams identified a new interference pattern consisting of concomitant supersonic jets separated from each other by a shear layer and submerged in the subsonic region between the bow shock wave and body.

Wieting, Allan R.↗
NASA NTRS1992

Three-dimensional simulation of a translating strut inlet

A three-dimensional Navier-Stokes code is used to numerically simulate the flow through a translating strut scramjet inlet. The inlet has variable geometry for efficient operation over a wide speed range. Overall flow-field features such as the corner flow, topwall separation, shockwave coalescence, cowl pressure increase, and flow distortion at the throat are investigated. Comparisons are made with experimental results to provide for the assessment of the present analysis. Effects of boundary-layer ingestion on the overall flow features are also investigated.

Singh, D. J.↗
NASA NTRS1993

Chondrule formation by clumpy accretion onto the solar nebula

Chondrule textures and compositions appear to require rapid heating of precursor grain aggregates to temperatures in the range 1500 K to 2100 K, cooling times on the order of hours, and episodic and variable intensity events in order to produce chondrule rims and chemically distinct groups. Nebula shock waves have been proposed by Hood and Horanyi as a physical mechanism that may be capable of meeting the meteoritical constraints. Motivated by astronomical observations of the close environments of young stars, we suggest that the source of the nebula shock waves may be clumpy accretion onto the solar nebula - that is, episodic impacts onto the nebula by discrete cloud clumps with masses of at least 10(exp 22) g. If the cloud clumps are massive enough (10(exp 26) g), the resulting shockwave may be able to propagate to the midplane and process precursor aggregates residing in a dust sub-disk.

Boss, A. P.↗
NASA NTRS1995

Euler/Navier-Stokes flow computations on flexible configurations for stability analysis

Longitudinal dynamic stability derivatives required for design of aircraft are computed by using the state-of-the-art numerical methods for wing-body configurations. The flow is modeled using the Euler/Navier-Stokes equations with turbulence models and solved using an efficient finite-difference scheme suitable for patched structured grids. Computations are made at a flow regime that is beyond the limits of the current linear methods mostly used for computing stability derivatives. Flow conditions include shockwaves and viscous dominated vortical flows. Effect of Mach number and angle-of-attack on stability derivatives are demonstrated for a typical wing-body configuration. For the same configuration the effects of wing flexibility on the magnitude and phase angles of stability derivatives are also demonstrated.

Guruswamy, G.↗
NASA NTRS2000

Singular Isothermal Disks and the Formation of Multiple Stars

A crucial missing ingredient in previous theoretical studies of fragmentation is the inclusion of dynamically important levels of magnetic fields. As a minimal model for a candidate presursor to the formation of binary and multiple stars, we therefore consider the equilibrium configuration of isopedically magnetized, scale-free, singular isothermal disks, without the assumption of axial symmetry. We find that lopsided (M = 1) configurations exist at any dimensionless rotation rate, including zero. Multiple-lobed (M = 2, 3, 4, ...) configurations bifurcate from an underlying axisymmetric sequence at progressively higher dimensionless rates of rotation, but such nonaxisymmetric sequences always terminate in shockwaves before they have a chance to fission into separate bodies. We advance the hypothesis that binary and multiple star-formation from smooth (i.e., not highly turbulent) starting states that are supercritical but in unstable mechanical balance requires the rapid (i.e., dynamical) loss of magnetic flux at some stage of the ensuing gravitational collapse.

Galli, Daniele↗
NASA NTRS2000

Singular Isothermal Disks: Nonaxiymmetric Bifurcations and Equilibria - Paper 2

We review the difficulties of the classical fission and fragmentation hypotheses for the formation of binary and multiple stars. A crucial missing ingredient in previous theoretical studies is the inclusion of dynamically important levels of magnetic fields. As a minimal model for a candidate presursor to the formation of binary and multiple stars, we therefore formulate and solve the problem of the equilibria of isopedically magnetized, singular isothermal disks, without the assumption of axial symmetry. Considerable analytical progress can be made if we restrict our attention to models that are scale-free, i.e., that have surface densities that vary inversely with distance omega from the rotation axis of the system. In agreement with earlier analysis by Syer and Tremaine, we find that lopsided (M = 1) configurations exist at any dimensionless rotation rate, including zero. Multiple-lobed (M = 2, 3, 4, ...) configurations bifurcate from an underlying axisymmetric sequence at progressively higher dimensionless rates of rotation, but such nonaxisymmetric sequences always terminate in shockwaves before they have a chance to fission into M = 2, 3, 4, ... separate bodies. On the basis of our experience in this paper, we advance the hypothesis that binary and multiple star-formation from smooth (i.e., not highly turbulent) starting states that are supercritical but in unstable mechanical balance requires the rapid (i.e., dynamical) loss of magnetic flux at some stage of the ensuing gravitational collapse.

Galli, Danielle↗
NASA NTRS2001

Impact and Collisional Processes in the Solar System

In the past year, we have successfully developed the techniques necessary to conduct impact experiments on ice at very low temperatures. We employ the method of embedding gauges within a target to measure the shock wave and material properties. This means that our data are not model dependent; we directly measure the essential parameters needed for numerical simulations of impact cratering. Since then we have developed a new method for temperature control of icy targets that ensures temperature equilibrium throughout a porous target. Graduate student, Sarah Stewart-Mukhopadhyay, is leading the work on ices and porous materials as the main thrust of her thesis research. Our previous work has focused on icy materials with no porosity, and we propose to extend our research to include porous ice and porous ice-silicate mixtures. There is little shockwave data for porous ice, and none of the data was acquired under conditions applicable to the outer solar system. The solid ice Hugoniot is only defined for initial temperatures above -20 C. Our program uniquely measures the properties of ice at temperatures directly applicable to the solar system. Previous experiments were conducted at ambient temperatures soon after removing the target from a cold environment, usually just below freezing, or in a room just below freezing. Since ice has an extremely complicated phase diagram, it is important to conduct experiments at lower temperatures to determine the true outcome of impacts in the outer solar system. This research is complementary to other programs on icy materials. Our work focuses on the inherent material properties by measuring the shock wave directly; this complements the macroscopic observations and immediately provides the parameters necessary to extend this research to the gravity regime. Our numerical simulations of impacts in porous ice under very low gravity conditions, such as found on comets, show that the final crater size and shape is very dependent on the dynamic strength of the material.

Ahrens, Thomas J.↗
NASA NTRS2002

Prediction of Shock Wave Structure in Weakly Ionized Gas Flow by Solving MGD Equation

This paper reports the recent research results of shockwave structure predictions using a new developed code. The modified Rankine-Hugoniot relations across a standing normal shock wave are discussed and adopted to obtain jump conditions. Coupling a electrostatic body force to the Burnett equations, the weakly ionized flow field across the shock wave was solved. Results indicated that the Modified Rankine-Hugoniot equations for shock wave are valid for a wide range of ionization fraction. However, this model breaks down with small free stream Mach number and with large ionization fraction. The jump conditions also depend on the value of free stream pressure, temperature and density. The computed shock wave structure with ionization provides results, which indicated that shock wave strength may be reduced by existence of weakly ionized gas.

Deng, Z. T.↗