SEARCH · Search NASA

Results for “Slab geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1995

Fission foil measurements of neutron and proton fluences in the A0015 experiment

Results are given from sets of fission foil detectors (FFD's) (Ta-181, Bi-209, Th-232, U-238) which were included in the A0015 experiment to measure combined proton/neutron fluences. Use has been made of recent FFD high energy proton calibrations for improved accuracy of response. Comparisons of track density measurements have been made with the predictions of environmental modeling based on simple 1-D (slab) geometry. At 1 g/cm(exp 2) (trailing edge) the calculations were approximately 25 percent lower than measurements; at 13 g/cm(exp 2) (Earthside) calculations were more than a factor of 2 lower. A future 3-D modeling of the experiment is needed for a more meaningful comparison. Approximate mission proton doses and neutron dose equivalents were found. At Earthside (13 g/cm(exp 2) the dose was 171 rad and dose equivalent was 82 rem. At the trailing edge (1 g/cm(exp 2) dose was 315 rad and dose equivalent was 33 rem. The proton doses are less than expected from TLD doses by 16 percent and 37 percent, respectively. These differences can be explained by uncertainties in the proton and neutron spectra and in the method used to separate proton and neutron contributions to the measurements.

Frank, A. L.↗

NASA NTRS1995

Dawn-dusk asymmetries in the low-latitude boundary layer arising from the Kelvin-Helmholtz instability: A particle simulation

Along the low-latitude boundary layer (LLBL), the Kelvin-Helmholtz (K-H) instability can provide a means for injection of solar wind plasma across closed field lines of the magnetosphere. A fully electromagnetic, two-dimensional (three-velocity) particle code is used to investigate dawn-dusk asymmetries that can arise from velocity differences due to gradient drifts and electric field gradients, and ion acceleration across the narrow field transition layers in the dawn and dusk flanks. The model includes the dawn and dusk sides of the LLBL simultaneously in a slab geometry, incorporating seperate populations of ions and electrons for the magnetosphere and the magnetosheath plasmas. We report several effects: (1) asymmetries in the observed morphology of the turbulent structures, with familiar fluidlike vortex formation on the duskside, but tongues of magnetosheath plasma penetrating into the magnetosphere on the dawnside; (2) the formation of discrete current layers, characterized by strong currents and sharp gradients in the magnetic field, and discrete charge layers, having net charges and constant, weaker currents; (3) increasing asymmetry in dawn/dusk behavior with a decrease of initial currents; (3) increasing asymmetry in dawn/dusk behavior with a decrease of initial boundary layer width; and (4) enhancement of the dawn-to-dusk electric field as magnetosheath particles and momenta are transported across the magnetopause.

Wilber, M.↗

NASA NTRS1995

Heating of coronal holes by the resonant absorption and dissipation of Alfven waves and its relation to solar wind acceleration

Coronal hole regions are well known sources of high-speed solar wind, however to account for the observed properties of the solar wind a source of momentum and heat must be included. Alfven waves were suggested as the possible source of heating that accelerates the solar wind. We investigate the propagation of the Alfven waves in coronal holes via numerical solution of the linearized 2-D resistive MHD equations in slab geometry. The Alfven waves are driven at the lower boundary of the coronal hole and propagate into the corona. The waves are reflected at the coronal hole boundary and part of the wave energy leaks out of the coronal hole. We compare the calculated wavelengths and the attenuation rate of the fast mode Alfven waves in the leaky waveguide formed by the coronal hole with the analytical ideal MHD solutions. The formation of resonance heating layers is found to occur when shear Alfven waves propagate in an inhomogeneous coronal hole. The heating is enhanced when fast mode waves couple to the shear Alfven waves. The narrow heating layers are formed near the location of the ideal resonance, which might occur near the coronal hole boundary for a nearly constant density coronal hole, surrounded by a higher density plasma. We investigate the dependence of the heating on the driver frequency, the Lundquist number, and on the heliocentric distance. and find that the low frequency Alfven waves can be an efficient source of heating at large distances from the Sun. We discuss the relation of our results to the observed properties of high-speed solar wind and coronal holes.

Ofman, L.↗

NASA NTRS1996

A Systematic Solution Approach for Neutron Transport Problems in Diffuse Regimes

A systematic solution approach for the neutron transport equation, based on a least-squares finite-element discretization, is presented. This approach includes the theory for the existence and uniqueness of the analytical as well as of the discrete solution, bounds for the discretization error, and guidance for the development of an efficient multigrid solver for the resulting discrete problem. To guarantee the accuracy of the discrete solution for diffusive regimes, a scaling transformation is applied to the transport operator prior to the discretization. The key result is the proof of the V-ellipticity and continuity of the scaled least-squares bilinear form with constants that are independent of the total cross section and the absorption cross section. For a variety of least-squares finite-element discretizations this leads to error bounds that remain valid in diffusive regimes. Moreover, for problems in slab geometry a full multigrid solver is presented with V(1, 1)-cycle convergence rates approximately equal to 0.1, independent of the size of the total cross section and the absorption cross section.

Manteuffel, T. A.↗

NASA NTRS1996

Multigrid and Krylov Subspace Methods for Transport Equations: Absorption Case

In this paper we look at Krylov subspace methods for solving the transport equations in a slab geometry. The spatial discretization scheme used is a finite element method called Modified Linear Discontinuous scheme (MLD). We investigate the convergence rates for a number of Krylov subspace methods for this problem and compare with the results of a spatial multigrid scheme.

Oliveira, S.↗

NASA NTRS1997

Properties of accretion disk coronae

The properties of accretion disk corona in a parameter regime suitable for Galactic black hole candidates are considered and the results of an analysis of these properties using a self-consistent Monte Carlo code are presented. Examples of the coronal temperature structure, the shape and angular dependency of the spectrum and the maximum temperature allowed for each optical depth of the corona are presented. It is shown that the observed spectrum of the Galactic black hole candidate Cygnus X-1 cannot be explained by accreting disk corona models with a slab geometry, where the accretion disk is sandwiched by the comptonizing medium.

Wilms, J.↗

NASA NTRS1997

Self-Consistent Thermal Accretion Disk Corona Models for Compact Objects. I: Properties of the Corona and the Spectrum of Escaping Radiation

We present the properties of accretion disk corona (ADC) models in which the radiation field, the temperature, and the total opacity of the corona are determined self-consistently. We use a nonlinear Monte Carlo code to perform the calculations. As an example, we discuss models in which the corona is situated above and below a cold accretion disk with a plane-parallel (slab) geometry, similar to the model of Haardt & Maraschi. By Comptonizing the soft radiation emitted by the accretion disk, the corona is responsible for producing the high-energy component of the escaping radiation. Our models include the reprocessing of radiation in the accretion disk. Here the photons either are Compton-reflected or photoabsorbed, giving rise to fluorescent line emission and thermal emission. The self- consistent coronal temperature is determined by balancing heating (due to viscous energy dissipation) with Compton cooling, determined using the fully relativistic, angle-dependent cross sections. The total opacity is found by balancing pair productions with annihilations. We find that, for a disk temperature kT(sub BB) approx. less than 200 eV, these coronae are unable to have a self-consistent temperature higher than approx. 140 keV if the total optical depth is approx. less than 0.2, regardless of the compactness parameter of the corona and the seed opacity. This limitation corresponds to the angle-averaged spectrum of escaping radiation having a photon index approx. greater than 1.8 within the 5-30 keV band. Finally, all models that have reprocessing features also predict a large thermal excess at lower energies. These constraints make explaining the X-ray spectra of persistent black hole candidates with ADC models very problematic.

Dove, James B.↗

NASA NTRS1997

RXTE Observation of Cygnus X-1: Spectra and Timing

We present preliminary results from the analysis of an R.XTE observation of Cyg X-1 in the hard state. We show that the observed X-ray spectrum can be explained with a model for an accretion disk corona (ADC), in which a hot sphere is situated inside of a cold accretion disk (similar to an advection dominated model). ADC Models with a slab-geometry do not successfully fit the data. In addition to the spectral results we present the observed temporal properties of Cyg X-1, i.e. the coherence-function and the time-lags, and discuss the constraints the. temporal properties imply for the accretion geometry in Cyg X-1.

Wilms, J.↗

NASA NTRS1998

RXTE Observation of Cygnus X-1 Spectral Analysis

We present the results of the analysis of the broad-band spectrum of Cygnus X-1 from 3.0 to 200 keV, using data from a 10 ksec observation by the Rossi X-ray Timing Explorer. Although the spectrum can be well described phenomenologically by an exponentially cut-off power law (photon index Gamma = 1.45+0.01 -0.02 , e-folding energy e(sub f) = 162+9 -8 keV, plus a deviation from a power law that formally can be modeled as a thermal blackbody, with temperature kT(sub BB) = 1.2 +0.0 -0.1 keV), the inclusion of a reflection component does not improve the fit. As a physical description of this system, we apply the accretion disc corona (ADC) models. A slab-geometry ADC model is unable to describe the data. However, a spherical corona, with a total optical depth tau- = 1.6 + or - 0.1 and an average temperature kTc = 87 + or - 5 keV, surrounded by an exterior cold disc, does provide a good description of the data (X red (exp 2) = 1.55). These models deviate from the data bv up to 7% in the 5-10 keV range. However, considering how successfully the spherical corona reproduces the 10-200 keV data, such "photon-starved" coronal geometries seem very promising for explaining the accretion processes of Cygnus X-1.

Dove, J. B.↗

NASA NTRS1998

Short-Term Uplift Rates and the Mountain Building Process in Southern Alaska

We have used GPS at 10 stations in southern Alaska with three epochs of measurements to estimate short-term uplift rates. A number of great earthquakes as well as recent large earthquakes characterize the seismicity of the region this century. To reliably estimate uplift rates from GPS data, numerical models that included both the slip distribution in recent large earthquakes and the general slab geometry were constructed.

Sauber, Jeanne↗

NASA NTRS1996

Neutron fluences and dose equivalents measured with passive detectors on LDEF

Neutron fluences were measured on LDEF in the low energy (< 1 MeV) and high energy (> 1 MeV) ranges. The low energy detectors used the 6Li(n,alpha)T reaction with Gd foil absorbers to separate thermal (< 0.2 eV) and resonance (0.2 eV-1 MeV) neutron response. High energy detectors contained sets of fission foils (181Ta, 209Bi, 232Th, 238U) with different neutron energy thresholds. The measured neutron fluences together with predicted spectral shapes were used to estimate neutron dose equivalents. The detectors were located in the A0015 and P0006 experiments at the west and Earth sides of LDEF under shielding varying from 1 to 19 g/cm2. Dose equivalent rates varied from 0.8 to 3.3 microSv/d for the low energy neutrons and from 160 to 390 microSv/d for the high energy neutrons. This compares with TLD measured absorbed dose rates in the range of 1000-3000 microGy/d near these locations and demonstrates that high energy neutrons contribute a significant fraction of the total dose equivalent in LEO. Comparisons between measurements and calculations were made for high energy neutrons based on fission fragment tracks generated by fission foils at different shielding depths. A simple 1-D slab geometry was used in the calculations. Agreement between measurements and calculations depended on both shielding depth and threshold energy of the fission foils. Differences increased as both shielding and threshold energy increased. The modeled proton/neutron spectra appeared deficient at high energies. A 3-D model of the experiments is needed to help resolve the differences.

LDEF Project↗

NASA NTRS2010

MCNP Simulations of Measurement of Insulation Compaction in the Cryogenic Rocket Fuel Tanks at Kennedy Space Center by Fast/Thermal Neutron Techniques

MCNP simulations have been run to evaluate the feasibility of using a combination of fast and thermal neutrons as a nondestructive method to measure of the compaction of the perlite insulation in the liquid hydrogen and oxygen cryogenic storage tanks at John F. Kennedy Space Center (KSC). Perlite is a feldspathic volcanic rock made up of the major elements Si, AI, Na, K and 0 along with some water. When heated it expands from four to twenty times its original volume which makes it very useful for thermal insulation. The cryogenic tanks at Kennedy Space Center are spherical with outer diameters of 69-70 feet and lined with a layer of expanded perlite with thicknesses on the order of 120 cm. There is evidence that some of the perlite has compacted over time since the tanks were built 1965, affecting the thermal properties and possibly also the structural integrity of the tanks. With commercially available portable neutron generators it is possible to produce simultaneously fluxes of neutrons in two energy ranges: fast (14 Me V) and thermal (25 me V). The two energy ranges produce complementary information. Fast neutrons produce gamma rays by inelastic scattering, which is sensitive to Fe and O. Thermal neutrons produce gamma rays by prompt gamma neutron activation (PGNA) and this is sensitive to Si, Al, Na, K and H. The compaction of the perlite can be measured by the change in gamma ray signal strength which is proportional to the atomic number densities of the constituent elements. The MCNP simulations were made to determine the magnitude of this change. The tank wall was approximated by a I-dimensional slab geometry with an 11/16" outer carbon steel wall, an inner stainless wall and 120 cm thick perlite zone. Runs were made for cases with expanded perlite, compacted perlite or with various void fractions. Runs were also made to simulate the effect of adding a moderator. Tallies were made for decay-time analysis from t=0 to 10 ms; total detected gamma-rays; detected gamma-rays from thermal neutron reactions d. detected gamma-rays from non-thermal neutron reactions and total detected gamma-rays as a function of depth into the annulus volume. These indicated a number of possible independent metrics of perlite compaction. For example the count rate for perlite elements increased from 3600 to 8500 cps for an increase in perlite density from 6 lbs/lcf to 16.5 lbs/cf. Thus the MCNP simulations have confirmed the feasibility of using neutron methods to map the compaction of perlite in the walls of the cryogenic tanks.

Livingston, R. A.↗

NASA NTRS2014

Measuring the Coronal Properties of IC 4329A with NuSTAR

We present an analysis of an approximately 160 ks NuSTAR observation of the nearby bright Seyfert galaxy IC 4329A. The highquality broadband spectrum enables us to separate the effects of distant reflection from the direct coronal continuum, and to therefore accurately measure the high-energy cutoff to be E(sub cut) = 178 (+74 / −40) keV. The coronal emission arises from accretion disk photons Compton up-scattered by a thermal plasma, with the spectral index and cutoff being due to a combination of the finite plasma temperature and optical depth. Applying standard Comptonization models, we measure both physical properties independently using the best signal to noise obtained to date in an active galactic nucleus over the 3 - 79 keV band. We derive kT(sub e) = 37(+7 /−6) keV with tau = 1.25(+0.20 / −0.10) assuming a slab geometry for the plasma, and kT(sub e) = 33(+6 / −6) keV with tau = 3.41(+0.58 / −0.38) for a spherical geometry, with both having an equivalent goodness-of-fit.

X-rays: binaries↗

NASA NTRS2014

Measuring the Coronal Properties of IC 4329A with NuSTAR

finite plasma temperature↗

NASA NTRS2016

Influence of Molecular Simulation Model Accuracy on the Interfacial Properties of an Ionic Liquid: Overview of Recommended Practices

Increasing the energy storage capability of ionic liquid supercapacitors will require better understanding of ion-electrode interactions. We have probed the influence of these interactions on the structure and differential capacitance of of an ionic liquid ([EMIM][BF4]) at an ideal graphite interface as a function of model accuracy. Of note, differential capacitance is determined through newly derived and validated fluctuation formulas. In terms of model accuracy, we test electrostatic techniques, electrode charging techniques, and electrolyte interatomic potentials. For electrostatic summations, we employ high cost, high fidelity techniques as well as less expensive, approximate techniques for summation in slab geometry. For electrode charging, uniform, constant-charge and environmentally responsive, constant-potential conditions are employed. For the ionic liquid, constant charge and atomically polarizable models are employed. We comment on the role of model accuracy on the structure and energetics of the electric double layer as well as on the magnitude and shape of differential capacitance.

simulations↗

NASA NTRS1986

Mantle circulation and the lateral migration of subducted slabs

The geometry of transverse migration of subducted lithospheric slabs is examined, and the way in which this influences the flow in the mantle is studied. The migration of subducted slabs generally appears to be retrograde (at rates of 10-25 mm/yr), so that the descent of material is actually steeper than the slab dip. Retrograde slab migration is probably caused by the tendence of negatively buoyant slabs to sink in the surrounding mantle. The properties of the flow driven by such retrograde slab migration are explored in simple two-dimensional models. The results are used as a guide to infer the contribution of retrograde slab motion to the more complex mantle flow and to examine some consequences of the additional component of mantle flow. It is shown that slab migration is an important factor that causes mantle flow to be geometrically complex and time dependent.

Garfunkel, Z.↗

NASA NTRS2023

Uncovering the Geometry of the Hot X-Ray Corona in the Seyfert Galaxy NGC 4151 with IXPE

We present an X-ray spectropolarimetric analysis of the bright Seyfert galaxy NGC 4151. The source has been observed with the Imaging X-ray Polarimetry Explorer (IXPE) for 700 ks, complemented with simultaneous XMM–Newton (50 ks) and NuSTAR (100 ks) pointings. A polarization degree Π = 4.9 ± 1.1 per cent and angle Ψ = 86° ± 7° east of north (68 per cent confidence level) are measured in the 2–8 keV energy range. The spectropolarimetric analysis shows that the polarization could be entirely due to reflection. Given the low reflection flux in the IXPE band, this requires, however, a reflection with a very large (>38 per cent) polarization degree. Assuming more reasonable values, a polarization degree of the hot corona ranging from ∼4 to ∼8 per cent is found. The observed polarization degree excludes a ‘spherical’ lamppost geometry for the corona, suggesting instead a slab-like geometry, possibly a wedge, as determined via Monte Carlo simulations. This is further confirmed by the X-ray polarization angle, which coincides with the direction of the extended radio emission in this source, supposed to match the disc axis. NGC 4151 is the first active galactic nucleus with an X-ray polarization measure for the corona, illustrating the capabilities of X-ray polarimetry and IXPE in unveiling its geometry.

NGC 4151↗

NASA NTRS2011

On-Line Tool for the Assessment of Radiation in Space - Deep Space Mission Enhancements

The On-Line Tool for the Assessment of Radiation in Space (OLTARIS, https://oltaris.nasa.gov) is a web-based set of tools and models that allows engineers and scientists to assess the effects of space radiation on spacecraft, habitats, rovers, and spacesuits. The site is intended to be a design tool for those studying the effects of space radiation for current and future missions as well as a research tool for those developing advanced material and shielding concepts. The tools and models are built around the HZETRN radiation transport code and are primarily focused on human- and electronic-related responses. The focus of this paper is to highlight new capabilities that have been added to support deep space (outside Low Earth Orbit) missions. Specifically, the electron, proton, and heavy ion design environments for the Europa mission have been incorporated along with an efficient coupled electron-photon transport capability to enable the analysis of complicated geometries and slabs exposed to these environments. In addition, a neutron albedo lunar surface environment was also added, that will be of value for the analysis of surface habitats. These updates will be discussed in terms of their implementation and on how OLTARIS can be used by instrument vendors, mission designers, and researchers to analyze their specific requirements.12

Sandridge, Chris a.↗