Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solid angle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

SEARCH FOR SOURCES OF HIGH-ENERGY NEUTRONS WITH FOUR YEARS OF DATA FROM THE ICETOP DETECTOR

IceTop is an air-shower array located on the Antarctic ice sheet at the geographic South Pole. IceTop can detect an astrophysical flux of neutrons from Galactic sources as an excess of cosmic-ray air showers arriving from the source direction. Neutrons are undeflected by the Galactic magnetic field and can typically travel 10 ( E /PeV) pc before decay. Two searches are performed using 4 yr of the IceTop data set to look for a statistically significant excess of events with energies above 10 PeV (10{sup 16} eV) arriving within a small solid angle. The all-sky search method covers from −90° to approximately −50° in declination. No significant excess is found. A targeted search is also performed, looking for significant correlation with candidate sources in different target sets. This search uses a higher-energy cut (100 PeV) since most target objects lie beyond 1 kpc. The target sets include pulsars with confirmed TeV energy photon fluxes and high-mass X-ray binaries. No significant correlation is found for any target set. Flux upper limits are determined for both searches, which can constrain Galactic neutron sources and production scenarios.

79 ASTRONOMY AND ASTROPHYSICS↗

Calibration of the NEXT-White detector using 83m Kr decays

We report the NEXT-White (NEW) detector is currently the largest radio-pure high-pressure xenon gas time projection chamber with electroluminescent readout in the world. It has been operating at Laboratorio Subterraneo de Canfranc (LSC) since October 2016. This paper describes the calibrations performed using 83m Kr decays during a long run taken from March to November 2017 (Run II). Krypton calibrations are used to correct for the finite drift-electron lifetime as well as for the dependence of the measured energy on the event transverse position which is caused by variations in solid angle coverage both for direct and reflected light and edge effects. After producing calibration maps to correct for both effects we measure an excellent energy resolution for 41.5 keV point-like deposits of (4.553 +/- 0.010 (stat.) ± 0.324 (sys.)) % FWHM in the full chamber and (3.804 ± 0.013 (stat.) ± 0.112 (sys.)) % FWHM in a restricted fiducial volume. Laslty, using naive 1/$ \sqrt{E} $ scaling, these values translate into resolutions of (0.5916 ± 0.0014 (stat.) ± 0.0421 (sys.)) % FWHM and (0.4943 ± 0.0017 (stat.) +/- 0.0146 (sys.)) % FWHM at the Qᵦᵦ energy of xenon double beta decay (2458 keV), well within range of our target value of 1%.

47 OTHER INSTRUMENTATION↗

Emulation of anamorphic imaging on the SHARP extreme ultraviolet mask microscope

The SHARP high-numerical aperture actinic reticle review project is a synchrotron-based, extreme ultraviolet (EUV) microscope dedicated to photomask research. SHARP emulates the illumination and imaging conditions of current EUV lithography scanners and those several generations into the future. An anamorphic imaging optic with increased mask-side numerical aperture (NA) in the horizontal and increased demagnification in the vertical direction has been proposed in this paper to overcome limitations of current multilayer coatings and extend EUV lithography beyond 0.33 NA. Zoneplate lenses with an anamorphic 4×/8× NA of 0.55 are fabricated and installed in the SHARP microscope to emulate anamorphic imaging. SHARP’s Fourier synthesis illuminator with a range of angles exceeding the collected solid angle of the newly designed elliptical zoneplates can produce arbitrary angular source spectra matched to anamorphic imaging. A target with anamorphic dense features down to 50-nm critical dimension is fabricated using 40 nm of nickel as the absorber. In a demonstration experiment, anamorphic imaging at 0.55 4×/8× NA and 6 deg central ray angle (CRA) is compared with conventional imaging at 0.5 4× NA and 8 deg CRA. A significant contrast loss in horizontal features is observed in the conventional images. Finally, the anamorphic images show the same image quality in the horizontal and vertical directions.

36 MATERIALS SCIENCE↗

RECON 6: A real-time, wide-angle, solid-state reconnaissance camera system for high-speed, low-altitude aircraft

The maturity of self-scanned, solid-state, multielement photosensors makes the realization of "real time" reconnaissance photography viable and practical. A system built around these sensors which can be constructed to satisfy the requirements of the tactical reconnaissance scenario is described. The concept chosen is the push broom strip camera system -- RECON 6 -- which represents the least complex and most economical approach for an electronic camera capable of providing a high level of performance over a 140 deg wide, continuous swath at altitudes from 200 to 3,000 feet and at minimum loss in resolution at higher altitudes.

Labinger, R. L.↗

Sagittal collimating diaboloid: a new grazing-incidence mirror surface for higher-throughput resonant inelastic X-ray scattering spectrometers

A major challenge in soft X-ray spectroscopy is the efficient collection of the emitted X-rays by grazing-incidence mirrors. In this energy range, grazing-incidence mirrors are widely used as optics for the collection of light. The small angle of incidence necessarily limits the collection solid angle of soft X-ray spectrometers. We present a new mirror surface, a sagittal collimating diaboloid, that can both collect and focus light from a point source in an aberration-free manner. The usefulness of this optic in increasing throughput is demonstrated with a realistic example design of a moderate-sized (3 m) medium-resolution resonant inelastic X-ray scattering spectrometer.

36 MATERIALS SCIENCE↗

Detecting the full photoemission cone from laser-based ARPES experiments by leveraging deflector technology

Angle-resolved photoemission spectroscopy (ARPES) provides a direct access to the electronic band structure of solid and molecular systems. The momentum range accessible by this technique depends directly on the photon energy used, and low-photon-energy sources are insufficient to photoemit electrons over the full Brillouin zone of most quantum materials. In addition, while electrons are emitted over a 2π solid angle, conventional hemispherical analyzers only collect a small subset of those electrons. A previous work [Gauthier et al., Rev. Sci. Instrum. 92, 123907 (2021)] demonstrated that electrons emitted over a larger field-of-view can be acquired in one fixed configuration by accelerating them toward the analyzer with a bias voltage. Here, in this study, we extend this work by leveraging the deflector technology of novel ARPES hemispherical analyzers. We demonstrate the ability to detect all 2π photoemitted electrons in a fixed configuration for various materials, such as gold, cuprates, and transition-metal dichalcogenides. This approach is especially advantageous for time-resolved ARPES, as electron dynamics over a large momentum range can be accessed with identical measurement conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Compton scattering in jets: A mechanism for approximately 0.4 and less than or approximately 0.2 MeV line production

We show that gamma-ray line emission at approximately 0.4 and less than or approximately 0.2 MeV can be produced by Compton scattering of beamed radiation in the jets of Galactic black hole candidates. This mechanism has the novel feature of not invoking the presence of e(exp +)-e(exp -) pairs. To produce the two lines, we employ a symmetric double-sided jet with bulk flow velocity of about 0.5c and incident beam radiation with a hard energy spectrum. We show that the two lines can be seen at viewing-angle cosines relative to the jet ranging from 0.2 to 0.6. This comprises 40% of the total solid angle. In addition, the line radiation is approximately 10% polarized. Depending on the bulk flow and viewing angle, the model can produce lines at other energies as well. In particular, a broad feature near 1 MeV can be seen by viewing the jet close to its axis. Our model can also accommodate single-line spectra if the beamed gamma-ray emission or the jets themselves are asymmetric.

Skibo, J. G.↗

Search For Excited Cascade Hypersons (¿*-) Using the CLAS12 Spectrometer at Jefferson Laboratory

The number of experimentally observed doubly strange Cascade states to date is far fewer than has been predicted theoretically. The CLAS12 Very Strange physics program (E12- 11-005A) at the Thomas Jefferson National Accelerator Facility aims to study the electroproduction of these states using the newly upgraded CEBAF Large Acceptance Spectrometer for 12 GeV (CLAS12) in experimental Hall B. In this project, the reaction ep ! e0K+K+??? ! e0K+K+K?(?=?0) is studied using CLAS12 Run Group A (RG-A) data sets taken by impinging electron beams of 10:2 and 10:6 GeV energies on an LH2 target. Scattered electrons are detected with either the Forward Detector (FD), covering a polar angle range of 5? to 35? to study electroproduction, or with the Forward Tagger (FT), covering a polar angle range of 2:5? to 4:5?, to study quasi-real photoproduction. The CLAS12 detector with nearly a 4? solid angle coverage is used to detect scattered electrons and charged kaons in the ?final state. ?=?0 hyperons are reconstructed using the missing mass technique to explore intermediate doubly-strange hyperons (???) that decay to K? and ?=?0. No statistically significant ??? states other than the ???(1530) were found in the missing mass spectra based on the currently available statistics in the CLAS12-FD acceptance only. A maximum log-likelihood method is implemented to determine the statistical significance and the upper limits on the ???(1820) electroproduction cross section by constructing 95% confidence level boundaries on the ???(1820) yields. Additional research was conducted to investigate the upper limit electroproduction cross section of the reaction ep ! e0K+K+??? ! e0K+K+K?(?=?0) as a function of the electroproduced ??? mass and the differential cross section ( d?dMM(e0K+K+) ) as a function of missing mass MM(e0K+K+) for electroproduction and quasi-real photoproduction processes.

Khanal, Achyut↗

Simulations of Hayabusa2 Atmospheric Entry and Comparisons with Data from the Imaging Campaign

Results from flow and radiation simulations for the Hayabusa2 Sample Return Capsule (SRC) along its best-estimated trajectory (BET) are presented. Flow fields are first computed at several points along the best-estimated trajectory for a freestream consisting of N2, O2, Ar, CO2, and H2O; the last three are trace species in Earth’s atmosphere. The thermal response of an assumed ablative material is estimated and flow fields are recomputed at each time point with modified surface temperature distributions. The spectral radiance, from the combination of an aeroheated capsule and the high-temperature shock layer around it, is computed on an imaging plane for a given view angle and slant range at each time point. The radiance is transported through the intervening atmosphere between the Hayabusa2 SRC and the observing aircraft and upon integration over solid angle representing the field of view of the instruments converted to a spectral irradiance. The spectral irradiance is convolved with the instrument function to obtain results that can be directly compared with measurement. Fair to good comparisons with measurements required shifting the time coordinate of measurements by 7.5 s. The disagreement between prediction and measurement is substantial after about 72.5 s along the BET. Additional computations seem to support the idea of flow transition over the capsule.

Atmospheric entry↗

Simulations of Hayabusa2 Atmospheric Entry and Comparisons with Data from the Imaging Campaign

Results from flow and radiation simulations for the Hayabusa2 Sample Return Capsule (SRC) along its best-estimated trajectory (BET) are presented. Flow fields are first computed at several points along the best-estimated trajectory for a freestream consisting of N2, O2, Ar, CO2, and H2O; the last three are trace species in Earth’s atmosphere. The thermal response of an assumed ablative material is estimated and flow fields are recomputed at each time point with modified surface temperature distributions. The spectral radiance, from the combination of an aeroheated capsule and the high-temperature shock layer around it, is computed on an imaging plane for a given view angle and slant range at each time point. The radiance is transported through the intervening atmosphere between the Hayabusa2 SRC and the observing aircraft and upon integration over solid angle representing the field of view of the instruments converted to a spectral irradiance. The spectral irradiance is convolved with the instrument function to obtain results that can be directly compared with measurement. Fair to good comparisons with measurements required shifting the time coordinate of measurements by 7.5 s. The disagreement between prediction and measurement is substantial after about 72.5 s along the BET. Additional computations seem to support the idea of flow transition over the capsule.

Atmospheric entry↗

An ultra-high gain and efficient amplifier based on Raman amplification in plasma

Raman amplification arising from the excitation of a density echelon in plasma could lead to amplifiers that significantly exceed current power limits of conventional laser media. Here we show that 1–100 J pump pulses can amplify picojoule seed pulses to nearly joule level. The extremely high gain also leads to significant amplification of backscattered radiation from “noise”, arising from stochastic plasma fluctuations that competes with externally injected seed pulses, which are amplified to similar levels at the highest pump energies. The pump energy is scattered into the seed at an oblique angle with 14 J sr -1 , and net gains of more than eight orders of magnitude. The maximum gain coefficient, of 180 cm -1 , exceeds high-power solid-state amplifying media by orders of magnitude. The observation of a minimum of 640 J sr -1 directly backscattered from noise, corresponding to ≈10% of the pump energy in the observation solid angle, implies potential overall efficiencies greater than 10%.

42 ENGINEERING↗

Monte Carlo Calculations of Neutron Number Spectra and Buildup Factors in Infinite Conical Configurations

A Monte Carlo code simulating neutron transport in infinite cones of water and water-equivalent hydrogen was prepared for an IBM 704 computer. The code was essentially a modification of the point-source, infinite-medium code used in NASA TN D-850. Studies were made of differential neutron number spectra and associated buildup factors for infinite cones having apex half-angles of 15 degrees, 30 degrees, 45 degrees, and 60 degrees. The buildup factors obtained were compared with those for the appropriate infinite medium, which allowed an examination of the effect of solid angle subtended by material on the transport of 6-Mev source neutrons emanating from the cone apex. The variation of number buildup factor with distance for the various cones shows that neutron scattering out of the cones is predominant in the first 30 t o 40 centimeters of material, and that transport beyond this distance is of a similar nature in all the cones.

CONE↗

Application of multi-angle scattering maps to stepped surfaces

This study examines channeling, multiple scattering, and neutralization/re-ionization of ions scattered along the stepped Al(332) plane. Our experimental approach involves probing the surface with 1–2 keV He + and Ne + beams, and then systematically mapping the scattered ion fluxes over a large solid angle. This provides comprehensive ion channeling information over all directions, rather than along a few low-index azimuths, as is common practice in ion scattering spectroscopy. We first probe the surface with 2 keV He + at near-normal incidence, and then map the backscattered particle flux (both ions and neutrals) via time of flight (TOF) spectrometry. The features contained in these maps can be correlated with axial and inter-planar channeling effects, and are reproduced well via binary collision simulations. Sensitivity to the stepped surface topography is heightened considerably for oblique ion incidence in the forward-scattering direction. In this geometry, we used 2 keV Ne + to probe the surface and mapped the corresponding scattered fluxes of both single and multiply-charged ions. In both cases, the scattering intensity depends strongly on the precise trajectory taken along the surface, and is particularly sensitive to how extensively the incident ions interact with the step edges. We interpret the information contained in these maps by considering several mechanisms for charge transfer and double ion production. The formation of Ne ++ appears to be correlated with a previously observed inelastic mechanism that occurs when the collision apsis, R min , is less than 0.65 Å. In conclusion, this contributes to an energy loss of 48 ± 8 eV for Ne + undergoing single scattering; the R min threshold for this inelastic step coincides with the emergence of a distinct Ne ++ peak. Using the information gained from the maps, we propose methods for extending this approach to chemisorbed layers.

47 OTHER INSTRUMENTATION↗

A robust derivation of the tight relationship of radio core dominance to inclination angle in high redshift 3CRR sources

It is believed that, in radio-loud active galactic nuclei (AGNs), the core radio flux density can be normalized to the flux density of the extended lobe emission to infer the orientation of a radio source. However, very little is known about the reliability and precision of this method, and we are unaware of any robust conversion recipe to infer the inclination from the core dominance. Investigating whether or not the radio core dominance parameter R separates the quasars from the radio galaxies in the z ⩾ 1 3CRR catalog, we found excellent agreement of R with optical type, infrared flux ratios, and optical polarization. This indicates that probably both R and optical classification are very good orientation indicators, and the unified model is strongly predictive for these objects. The relative number densities indicate half-opening angles close to 60°, as expected from large surveys. The separations of optical types according to radio core dominance as well as near-infrared/MIR ratios, which are essentially perfect, mean that there can be only a small dispersion of torus half-opening angles. Also, even though torus dust is thought to be clumpy, there is an almost zero probability to see a type-1 source at high inclination. Finally, using only the Copernican Principle, i.e., the assumption that solid angle is filled uniformly with source axis orientations, we estimated a semi-empirical relation between core dominance and AGN inclination. This makes it possible to use R to infer the inclination of a source to an accuracy of ∼10° or less, at least for this type of object.

79 ASTRONOMY AND ASTROPHYSICS↗

Systematic two-dimensional cascade tests of NACA 65-series compressor blades at low speeds

A two-dimensional low-speed porous-wall cascade tunnel investigation has been conducted to establish the performance of the NACA 65-series compressor blade sections over the useful range of inlet angle, solidity, and section camber. Design points for optimum high-speed operation are presented. The loading limitation is determined for some conditions. Trends of section operating range with increasing section camber are determined for the four inlet angles tested.

COMPRESSORS - AXIAL-FLOW↗