Effects of cadmium and copper treatments and water stress on the thermal emission from peas /Pisum sativum L./ - Controlled environment experiments
Explore the source record for details and available documents.
Horler, D. N.↗
SEARCH · Search NASA
Results for “Stress and Environment Effects”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Micromechanics analysis of space simulated thermal stresses in composites. I - Theory and unidirectional laminates. II - Multidirectional laminates and failure predictions
A micromechanics analysis is used to study the effects of constituent properties on thermally induced stresses in continuous fiber reinforced composites. A finite element formulation is described, and results are presented for unidirectional carbon/epoxy laminates. It is shown that significant stresses develop in composites exposed to thermal excursions typical of spacecraft operating environments and that the fiber thermoelastic properties have a minimal effect on the magnitude of these stresses. The finite element micromechanics analysis is then extended to the study of multidirectional laminates using a simple global/local formulation. Damage initiation predictions are compared with experimental data, and factors controlling the initiation of damage are identified. Ways of improving the durability of composites are discussed.
Bowles, David E.↗
A MULTI TARGETED DIETARY SUPPLEMENT AS A POTENTIAL COUNTERMEASURE FOR DEEP SPACE EXPLORATION
Future deep space exploration to the Moon and Mars and beyond are currently major goals of NASA. Space flight presents unique challenges to the human physiology from the combined effects of microgravity, social isolation, altered circadian rhythm and radiation. Oxidative stress has been implicated as a crucial factor in space environment induced injury. Elucidating these detrimental effects on the central nervous system and brain is a primary objective, as they may result in adverse changes in astronaut behavior, mood and performance of critical tasks. We were recently funded by HRP Human Factors Behavioral Performance (HFBP) Element to test the hypothesis that Galactic Cosmic Ray Simulation (GCRsim) Ionizing Radiation (IR), microgravity and social isolation combine synergistically to trigger an oxidative stress response that alters immune homeostasis, brain structure and function, and neurobehavioral and cognitive performance. This project will identify potential biomarkers for, and mechanisms underlying, structural and functional changes in the immune and nervous systems leading to behavioral/cognitive performance deficits, and its potential application to develop effective countermeasures to mitigate negative health effects of long duration space habitation. Countermeasures to offset neurological damaged and cognitive deficits are paramount for protecting astronauts during deep space transits, but many countermeasures have been found to be unsuitable in ground-based model studies. We have developed a multi targeted dietary supplement (MTDS) designed to simultaneously ameliorate oxidative stress, inflammatory processes, energetic shortfalls, and membrane and mitochondrial deterioration. Administration of this MTDS has improved cognition and longevity in age accelerated and normal aging mice. Specifically, the MTDS was found to prevent a decline in mitochondrial complex III activity and cell loss, as well as prevent an increase in protein carbonyls and mitochondrial 3-nitrotyrosine in the brain of these mice. Further, administration of the MTDS was also found to reduce bone marrow chromosomal aberrations, DNA damage, lymphocyte apoptosis after whole body exposure of 2 Gy γ radiation. Mice exposed to a high dose cranially (10 Gy) had decreased cognitive responses (seen as increased latency time to uncover buried food and decreased novel object recognition), increased plasma 8-OHdG levels, increased markers of cell stress in the brain, decreased hippocampal brain-derived neurotrophic factor (BDNF) protein and decreased plasma levels of cytokines, all of which were ameliorated with treatment of the MTDS. As we have shown the supplement is protective in models of cognitive damage similar space environment stressors, particularly increased oxidative stress, we propose it may be a suitable countermeasure for upcoming deep space exploration.
Stephanie Puukila↗
Landing in the future: Biological experiments on Earth and in space orbit
The development of an Earth biosatellite to duplicate the parameters of pressure, temperature, humidity and others in a space environment onboard Cosmos-1129 is discussed. Effects of a space environment on fruit flies, dogs, laboratory rats in procreation, behavior, stress, biorhythm, body composition, gravitation preference, and cell cultures are examined. The space environment for agricultural products is also studied. The effects of heavy nuclei of galactic space radiation on biological objects inside and outside the satellite is studied, and methods of electrostatic protection are developed.
Pokrovskiy, A.↗
Spacelab life sciences 1 - Reprints of background life sciences publications
Results from investigations conducted in preparation for the first Spacelab life-sciences mission are summarized in selected previously published papers. Topics discussed are the role of calcium in osteoporosis, orthostaic hypotension, cardiovascular adjustments to gravitational stress, cell biology, exposure to stressful environments, heart-lung interactions in aerospace medicine, effects of weightlessness on human fluid and electrolyte physiology, macular bioaccelerometers on earth and in space, and metabolism of nonessential N-15-labeled amino acids and the measurement of human whole-body protein synthesis rates.
White, Ronald↗
Cool Vest
ILC, Dover Division's lightweight cooling garment, called Cool Vest was designed to eliminate the harmful effects of heat stress; increases tolerance time in hot environments by almost 300 percent. Made of urethane-coated nylon used in Apollo, it works to keep the body cool, circulating chilled water throughout the lining by means of a small battery-powered pump. A pocket houses the pump, battery and the coolant which can be ice or a frozen gel, a valve control allows temperature regulation. One version is self-contained and portable for unrestrained movement, another has an umbilical line attached to an external source of coolant, such as standard tap water, when extended mobility is not required. It is reported from customers that the Cool Vest pays for itself in increased productivity in very high temperatures.
Source record↗
Identification and Evaluation of Integration and Cross Cutting Issues Across HRP Risks
The HRP Integrated Research Plan contains the research plans for the 32 risks requiring research to characterize and mitigate. These risks to human health and performance in spaceflight are identified by evidence and each one focuses on a single aspect of human physiology or performance. They are further categorized by aspects of the spaceflight environment, such as altered gravity or space radiation, that that play a major role in their likelihood and consequence. From its inception the "integrate" in the Research Plan has denoted the integrated nature of risks to human health and performance, the connectedness of physiological systems within the human body regardless of the spaceflight environment, and the integrated response of the human body to the spaceflight environment. Common characteristics of the spaceflight environment include altered gravity, atmospheres and light/dark cycles, space radiation, isolation, noise, and periods of high or low workload. Long term exposure to this unique environment produces a suite of physiological effects such as stress; vision, neurocognitive and anthropometric changes; circadian misalignment; fluid shifts, deconditioning; immune dysregulation; and altered nutritional requirements. Matrix diagraming was used to systematically identify, analyze and rate the many-to-many relationships between environmental characteristics and the suite of physiological effects. It was also to identify patterns in the relationships of common physiological effects to each other. Analyses of patterns or relationships in these diagrams help to identify issues that cut across multiple risks. Cross cutting issues benefit from a multidisciplinary approach that synthesizes concepts or data from two or more disciplines to identify and characterize risk factors or develop countermeasures relevant to multiple risks. They also help to illuminate possible problem areas that may arise when a countermeasure impacts risks other than those which it was developed to mitigate, or identify groupings of physiological changes that are likely to occur that may impact the overall risk posture.
Steinberg, S. L.↗
2014 SRP Integration Transcript
HRP's mission is to reduce the risks to human health and performance during long-duration spaceflight. The HRP Integrated Research Plan (IRP) contains the research plans for the 32 risks that require research to characterize and mitigate. From its inception the "integrate" aspect of the IRP has denoted the integrated nature of risks to human health and performance. Even though each risk in the IRP has its own research plan and is tracked separately, the interrelated nature of health and performance requires that they be addressed in an integrative or holistic fashion so that the connectedness of physiological systems within the human body and the integrated response to spaceflight can be addressed. Common characteristics of the spaceflight environment include altered gravity, atmospheres, and light/dark cycles; space radiation; isolation; noise; and periods of high or low workload. Long-term exposure to this unique environment produces a suite of physiological effects such as stress; vision, neurocognitive, and anthropometric changes; circadian misalignment; fluid shifts; cardiovascular deconditioning; immune dysregulation; and altered nutritional requirements. Expanding cross-disciplinary integrative approaches that synthesize concepts or data from two or more disciplines would improve the identification and characterization risk factors, and enable the development of countermeasures relevant to multiple risks. Cross-disciplinary approaches might also help to illuminate problem areas that may arise when a countermeasure adversely impacts risks other than those which it was developed to mitigate, or to identify groupings of physiological changes that are likely to occur that may impact the overall risk posture. In 2014 HRP embarked on a pilot study that combined four SRPs (and 12 HRP risks) - Behavioral Health, Sensorimotor, Cardiovascular, and Bone/Muscle - specifically to discuss cross-disciplinary integration. The points outlined below were suggested to seed the discussion, within the bounding constraint that research plans must be feasible and relevant to the HRP mission. While these were suggested starting points, the overall guiding principle was to allow free discussion from panel members on any aspect of integrated research that they felt was important, Existing cross-disciplinary integration as documented in the IRP (HRR), Existing or needed integration already identified by HRP, but not yet well defined within the IRP, Areas of integration that are missing.
Steinberg, Susan↗
Evaluation of the cyclic behavior of aircraft turbine disk alloys, part 2
Several nickel-base aircraft turbine disk superalloys were evaluated at 650 C for resistance to fatigue crack initiation and propagation under cyclic and cyclic/dwell conditions. Controlled strain low cycle fatigue (LCF) and controlled load crack propagation tests were performed and results utilized to provide a direct comparison among the alloys. Tests were performed on selected alloys to evaluate the effects of hold times, mean stresses, stress-dwell cycle types, inert environment, and contractor test methods. At the lower total strain ranges of interest, the alloys exhibited generally increasing initiation life with increasing tensile strength for both cyclic (0.33 Hz) and cyclic/dwell (900-sec hold per cycle) conditions. Rank order of the alloys by LCF initiation life changed substantially at higher strain ranges, approaching the rank order expected from monotonic tensile ductilities. The effect of the 900 sec (15 min) hold time fatigue life varied significantly from alloy to alloy. Generally, the higher-strength, finer-grained alloys exhibited more significant reductions in fatigue life due to the dwell. The effects of mean strain were found to be negligible and the effects of mean stress were pronounced. At high strain ranges the mean stress was near zero and did not contribute to reduction in life. At low strain ranges, however, mean stresses were large and significant reductions in LCF lives occurred.
Cowles, B. A.↗
Numerical modeling of physical vapor transport under microgravity conditions: Effect of thermal creep and stress
One of the most promising applications of microgravity (micro-g) environments is the manufacture of exotic and high-quality crystals in closed cylindrical ampoules using physical vapor transport (PVT) processes. The quality enhancements are believed to be due to the absence of buoyant convection in the weightless environment - resulting in diffusion-limited transport of the vapor. In a typical experiment, solid-phase sample material is initially contained at one end of the ampoule. The sample is made to sublime into the vapor phase and deposit onto the opposite end by maintaining the source at an elevated temperature with respect to the deposit. Identification of the physical factors governing both the rates and uniformity of crystal growth, and the optimization of the micro-g technology, will require an accurate modeling of the vapor transport within the ampoule. Previous micro-g modeling efforts have approached the problem from a 'classical' convective/diffusion formulation, in which convection is driven by the action of buoyancy on thermal and solutal density differences. The general conclusion of these works have been that in low gravity environments the effect of buoyancy on vapor transport is negligible, and vapor transport occurs in a diffusion-limited mode. However, it has been recently recognized than in the non-isothermal (and often low total pressure) conditions encountered in ampoules, the commonly-assumed no-slip boundary condition to the differential equations governing fluid motion can be grossly unrepresentative of the actual situation. Specifically, the temperature gradients can give rise to thermal creep flows at the ampoule side walls. In addition, temperature gradients in the vapor itself can, through the action of thermal stress, lead to bulk fluid convection.
Mackowski, Daniel W.↗
The effect of composition on the mechanism of stress-corrosion cracking of titanium alloys in nitrogen tetroxide, and aqueous and hot- salt environments Annual summary report, 1 May 1967 - 30 Apr. 1968
Stress corrosion data for titanium alloys in aqueous, hot salt, and nitrogen dioxide environments
Boyd, J. D.↗
The effect of composition on the mechanism of stress-corrosion cracking of titanium alloys in N2O4, and aqueous and hot-salt environments
Stress corrosion cracking susceptibility of titanium alloys in nitrogen tetroxide and aqueous and hot salt environments
Boyd, J. D.↗
Hydrogen environment embrittlement
Hydrogen embrittlement is classified into three types: internal reversible hydrogen embrittlement, hydrogen reaction embrittlement, and hydrogen environment embrittlement. Characteristics of and materials embrittled by these types of hydrogen embrittlement are discussed. Hydrogen environment embrittlement is reviewed in detail. Factors involved in standardizing test methods for detecting the occurrence of and evaluating the severity of hydrogen environment embrittlement are considered. The effect of test technique, hydrogen pressure, purity, strain rate, stress concentration factor, and test temperature are discussed. Additional research is required to determine whether hydrogen environment embrittlement and internal reversible hydrogen embrittlement are similar or distinct types of embrittlement.
Gray, H. R.↗
Strength and fracture of glass in the lunar environment
Due to the lack of water on the moon, the effects of hydrolytic depolymerization - stress corrosion cracking - will be nonexistent in glasses produced and used on the moon. This would seem to make lunar glass very attractive for use in a wide variety of space engineering applications. We have applied the equation that describes stress corrosion cracking to lunar glass to show that, indeed, decreasing water vapor pressure results in an increase in strength. Experimental results on simulated lunar glass confirm this. The stress corrosion equation predicts an extremely high strength for glasses produced on the moon. This equation, however, cannot be applied to glasses under anhydrous conditions. In an environment completely devoid of water, the strength of glass will be determined by the fracture of the glass at the tip of a flaw, without the corrosive effects of water. Under this condition, in accordance with fracture theory, the strength of the glass will primarily be a function of the flaw size. Our experimental results show that the presence of surface flaws is more detrimental to the strength of simulated lunar glass than the effect of hydrolytic depolymerization.
Allen, Daniel D.↗
Fracture behavior in silicon
The fracture mechanics of crystalline Si are reviewed, together with known techniques for minimizing the occurences of fracture and/or their effects. The fracture toughness (Kic) of Si varies only 10 percent from cell-to-cell and standard values have been established for different types of crystalline Si cells. A critical flaw size of 10-100 microns has been identified, and also pertains to polycrystalline materials. Chemical polishing is known to double the value of Kic, while edge rounding has no effect. Internal stresses, particularly those caused during ribbon growth, do not exceed 10 percent of Kic. External stresses are imposed by the module hardware and the ambient environment. Multiple contacts reduce the effects of cell fracture and series-parallel wiring in modules in arrays ameliorates the effects of single-cell failures. During manufacturing, maintenance of quality control and removal of sheets displaying aberrations can, depending on the costs and the implementation of the array reliability features, result in arrays delivering any desired level of reliability.
Leipold, M. H.↗
Hot environment effects on alloy mechanical properties
Prolonged high temperature performance of structural alloys requires joint attention to both corrosion and mechanical properties, and to their possible interactions. In this interpretive review paper, we provide a systematic compaction of theories and key observations on corrosion-mechanical properties interactions, from early single crystal work in the 1930s to recent studies on superalloys in nonoxidizing, oxidizing and hot corrosive environments. Particular attention is paid to environmental effects on creep, stress rupture and fatigue properties.
Davidson, J. M.↗
Creep fatigue life prediction for engine hot section materials (isotropic)
This Final Report covers the activities completed under the optional program of the NASA HOST Contract, NAS3-23288. The initial effort of the optional program was report-in NASA CR189221, which consisted of high temperature strain controlled fatigue tests to study the effects of thermomechanical fatigue, multiaxial loading, reactive environments, and imposed stresses. The baseline alloy used in the tests included B1900+Hf (with or without coating) and wrought INCO 718. Tests conducted on B1900+Hf included environmental tests using various atmospheres (75 psig oxygen, purified argon, or block exposures) and specimen tests of wrought INCO 718 included tensile, creep, stress rupture, TMF, multiaxial, and mean stress tests. Results of these testings were used to calibrate a CDA model for INCO 718 alloy and to develop modifications or corrections to the CDA model to handle additional failure mechanisms. The Socie parameter was found to provide the best correlation for INCO multiaxial loading. Microstructural evaluations consisting of optical, Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM) techniques, and surface replication techniques to determine crack initiation lives provided data which were used to develop life prediction models.
Nelson, R. S.↗
Effects of centrifugation on gonadal and adrenocortical steroids in rats
Many endocrine systems are sensitive to external changes in the environment. Both the pituitary adrenal and pituitary gonadal systems are affected by stress including centrifugation stress. The effect of centrifugation on the pituitary gonadal and pituitary adrenocortical systems was examined by measuring the gonadal and adrenal steroids in the plasma and brain following different duration and intensity of centrifugation stress in rats. Two studies were completed and the results are presented. The second study was carried out to describe the developmental changes of brain, plasma and testicular testosterone and dihydrotestosterone in Sprague Dawley rats so that the effect of centrifugation stress on the pituitary gonadal syatem could be better evaluated in future studies.
Kakihana, R.↗