Search NASA⌕ Search

SEARCH · Search NASA

Results for “Subchannel analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

52 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Subchannel codes: CTF and VIPRE-01

In this chapter, two state-of-the-art and well-used subchannel codes are presented: CTF and VIPRE-01. As part of the Consortium for Advanced Simulation of Light Water Reactors, CTF is being used for single- and two-phase flow analysis under light-water reactor normal and anticipated transient operating conditions. Accurate determination of flow distribution, pressure drop, and void content is crucial for predicting margins to thermal crisis and ensuring more efficient nuclear power plant performance. In preparation for the intended applications, CTF is extensively validated against data from experimental facilities. Meanwhile, the licensed commercial code VIPRE-01 is used to generate a baseline set of simulations for the targeted tests and the solution parameters are compared to CTF results. The closure models in CTF that are in the greatest need of improvement are highlighted and discussed.

Zhao, Xingang↗
DOE OSTI2020

Experimental investigation of turbulent wake flows in a helically wrapped rod bundle in presence of localized blockages

In nuclear sodium fast reactors, bundles of rods are tightly packed into a triangular lattice, enclosed in a hexagonal duct, and each pin is spirally wrapped with a thin wire. Flow blockages can potentially impact the local flow characteristics and heat transfer mechanisms in the bundle due to its small subchannel size. The effects of the blockage on the flow structures and heat transfer mechanisms are important aspects that require an accurate investigation. In this study, the flow-field characteristics in the vicinity of a blockage located in the exterior subchannel of rod bundles with helically wrapped wires were experimentally investigated. The velocity fields in the exterior subchannel were acquired by applying matched-index-of-refraction and time-resolved particle image velocimetry (TR-PIV) techniques for Reynolds numbers of Re 1 = 4000 and Re 2 = 17 000, i.e., equivalent to Rew 1 = 19 600 and Rew 2 = 83 200, respectively, based on the blockage width. The results from the TR-PIV measurements revealed an arch-shaped vortex with a large flow recirculation and a pair of counter-rotating vortices in the wake region downstream of the blockage, which is commonly observed in the wake flow of bluff bodies. The relative lateral distance and angle between the two vortices decreased when the Reynolds numbers increased. Profiles of maximum turbulence intensity along the shear layers illustrated the transition process including the growth, peak, and decay along the flow direction. From the spectral analysis of the turbulent velocities extracted at points along the shear layer, the Strouhal numbers ( St ) representing the vortex shedding frequency were found to be St = 0.25 and St = 0.56 for the left and right shear layers, respectively. Characteristics of shear layers generated by the blockage in the exterior subchannel were investigated via the two-point cross correlation of fluctuating velocities. The patiotemporal cross correlations of turbulent velocities, computed at points in the region where the left shear layer exhibited rolling effects and vortex breakdowns, were considerably wider and longer. The convection velocity U c was estimated to be ~0.82 U m to 0.93 U m . Proper orthogonal decomposition (POD) analysis was applied to the instantaneous velocity fields to extract the statistically dominant flow structures. It was found that POD modes 2–3 and 4–5 formed the pair modes when the corresponding POD temporal coefficients depicted sinusoidal shapes and exhibited nearly circular orbits in the phase space. Spectral analysis of the POD temporal coefficients confirmed the vortex shedding frequencies detected in the analysis of turbulent velocities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Development of Segregated Thermal-Hydraulics Solvers in MOOSE

The simulation of fluid flows is an essential part of the design and analysis of nuclear systems. Algorithms able to simulate flows at different fidelity levels are available in the Multiphysics Object-Oriented Simulation Environment (MOOSE) and MOOSE-based applications such as Pronghorn \cite{novak2018pronghorn}, Pronghorn-Subchannel, RELAP-7, and SAM. Currently, significant effort is being invested in the development of coarse-mesh Computational Fluid Dynamics (CFD) capabilities within MOOSE and Pronghorn for the simulation of Generation IV nuclear reactors. Traditionally, the solution algorithms in MOOSE have relied on Newton or quasi-Newton methods (such as the preconditioned Jacobian-free Newton-Krylov method) where residuals and Jacobians (or approximations thereof) are constructed. Both Newton and quasi-Newton methods require the solution of a linear system at each nonlinear Newton iteration with the Jacobian as the system matrix. The Jacobian contains blocks originating from all variables in the problem (i.e., for thermal-hydraulics at least pressure, velocities, and temperature). Due to the formulation of the problem in a general multiphysics setting on unstructured mesh, creating a good preconditioner for the linear system can be challenging, thus many fluid applications have utilized direct solver-based methods such as LU factorization. However, with increasing system size and complexity in multi-dimensional problems, the direct solution of linear systems becomes computationally expensive both in execution time and and memory. For this reason, recent effort has focused on adapting segregated solution algorithms for CFD problems in MOOSE. These algorithms use fixed-point iteration between segregated systems whose assembly and preconditioning are easier those of the monolithic system. Initial results show that the segregated solution algorithm outperforms the monolithic approach in terms of memory usage and for large 3D problems in terms of CPU time as well.

42 ENGINEERING↗
DOE OSTI2024

Development of Segregated Thermal-Hydraulics Solvers in MOOSE

The simulation of fluid flows is an essential part of the design and analysis of nuclear systems. Algorithms able to simulate flows at different fidelity levels are available in the Multiphysics Object-Oriented Simulation Environment (MOOSE) and MOOSE-based applications such as Pronghorn \cite{novak2018pronghorn}, Pronghorn-Subchannel, RELAP-7, and SAM. Currently, significant effort is being invested in the development of coarse-mesh Computational Fluid Dynamics (CFD) capabilities within MOOSE and Pronghorn for the simulation of Generation IV nuclear reactors. Traditionally, the solution algorithms in MOOSE have relied on Newton or quasi-Newton methods (such as the preconditioned Jacobian-free Newton-Krylov method) where residuals and Jacobians (or approximations thereof) are constructed. Both Newton and quasi-Newton methods require the solution of a linear system at each nonlinear Newton iteration with the Jacobian as the system matrix. The Jacobian contains blocks originating from all variables in the problem (i.e., for thermal-hydraulics at least pressure, velocities, and temperature). Due to the formulation of the problem in a general multiphysics setting on unstructured mesh, creating a good preconditioner for the linear system can be challenging, thus many fluid applications have utilized direct solver-based methods such as LU factorization. However, with increasing system size and complexity in multi-dimensional problems, the direct solution of linear systems becomes computationally expensive both in execution time and and memory. For this reason, recent effort has focused on adapting segregated solution algorithms for CFD problems in MOOSE. These algorithms use fixed-point iteration between segregated systems whose assembly and preconditioning are easier those of the monolithic system. Initial results show that the segregated solution algorithm outperforms the monolithic approach in terms of memory usage and for large 3D problems in terms of CPU time as well.

42 ENGINEERING↗
DOE OSTI2020

DUCTED ASSEMBLY STEADY STATE HEAT TRANSFER SOFTWARE

The Ducted Assembly Steady State Heat transfer software (DASSH) performs full core, steady state, subchannel temperature calculations for hexagonal, ducted assemblies. DASSH is targeted for use in the early stages of the reactor design process when assembly characteristics may not be defined or are undergoing considerable changes. DASSH provides a relatively rapid assessment of the temperature and flow distribution to inform reactor design updates and analysis.

ATZ, MILOSIVO↗
DOE OSTI2021

Code and Solution Verification Assessment of the CTF Thermal Hydraulic Subchannel Code

CTF is a thermal-hydraulics subchannel code jointly developed by Oak Ridge National Laboratory and North Carolina State University. Over the past seven years, the Consortium for Advanced Simulation of Light Water Reactors (CASL) has made a significant investment in developing CTF so it can be used to model light water reactors, including nominal operating conditions, departure from nucleate boiling analysis, and transients ranging from loss of flow to reactivity insertion accidents. In addition to implementing new modeling capabilities and developing the user input and output interface, extensive work has been performed to improve the code’s quality assurance program, resulting in a development process that conforms with NQA-1 requirements. The CASL program follows the Predictive Capability Maturity Model (PCMM) approach for assessing code quality, which emphasizes performing code verification(ensuring the code converges to the correct answer) and solution verification (ensuring the code converges for the intended application). Code and solution verification are used to identify uncertainty errors introduced by numerical approximations in the code and are important for demonstrating that the model is coded without error, which is an important aspect of the Best Estimate plus Uncertainty method. This paper presents a comprehensive overview of the code and solution verification testing that has been performed on CTF. A top-down approach is taken in which the intended CTF applications are presented, followed by the code features required for their modeling. These features are then linked to the applicable code and solution verification tests that demonstrate proper functioning. Past testing efforts are summarized, and new tests are added to help close gaps in the presented test matrix. Rather than performing “one-off” exercises, these tests are added to the automated CTF regression test suite to ensure continual code quality.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS1984

Performance analysis of an adaptive multiple access scheme for the message service of a land mobile satellite experiment (MSAT-X)

This paper describes an Adaptive Mobile Access Protocol (AMAP) for the message service of MSAT-X., a proposed experimental mobile satellite communication network. Message lengths generated by the mobiles are assumed to be uniformly distributed. The mobiles are dispersed over a wide geographical area and the channel data rate is limited. AMAP is a reservation based multiple access scheme. The available bandwidth is divided into subchannels, which are divided into reservation and message channels. The ALOHA multiple access scheme is employed in the reservation channels, while the message channels are demand assigned. AMAP adaptively reallocates the reservation and message channels to optimize the total average message delay.

Yan, T.-Y.↗
DOE OSTI2022

Comparisons of Nodal diffusion and whole-core transport methods for multiple cycles of a small Light water reacto

As part of a cooperative research and development agreement between the US department of Energy's Oak Ridge National Laboratory and Holtec International subsidiary SMR LLC, core simulator models of the SMR-160, a light water-cooled and -moderated, natural circulation, small modular reactor, were developed and compared. The model results indicate pin-by-pin power histories, critical boron concentration, and other key performance indicators useful for developing multi-cycle core loading patterns. One model uses industry standard nodal methods with a simple thermal-hydraulics solution, and the other uses an advanced deterministic neutronics solver with a coupled subchannel calculation. The goals of the comparison are to provide the reactor designer with a detailed and coupled core physics reference solution, inform the reactor designer of nodal model best practices based on the code-to-code comparison, and set up a workflow for performing subsequent detailed core simulator calculations. The results of this work will be used in the development of coupled neutronic, thermal hydraulic, and fuel performance models for advanced analysis of the SMR-160. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Development of a high-fidelity multi-physics coupling between MCNP6.2 and CTF4.0 for VVER applications

Ensuring system safety in the design, licensing, and operation phases is a priority in the nuclear industry. Performing extensive, full-scale reactor safety experiments is often prohibitive due to the large associated costs. Computational simulations offer an alternative safety analysis method, typically with significant cost reductions. Recent high-level developments in technology and increased availability of computational resources have allowed the development of high-fidelity, high-resolution multi-physics coupled codes. Such developments may be used to generate reference models for deterministic core calculations. Under this framework, the high-fidelity continuous energy Monte Carlo-based neutron transport code MCNP6.2 was coupled externally with the state-of-the-art thermal-hydraulics subchannel code, CTF4.0 for VVER (Water-Water Energetic Reactor) applications. A VVER-1000 fuel assembly model was used to demonstrate the capability of the coupled code. The converged coupled solution is compared to initial results, consisting of the first MCNP evaluation and first CTF evaluation after initialization. The VVER-1000 type assembly results are compared to other evaluations of the same assembly model. The findings indicate good agreement with expectations and reference cases, where available. The initial results of the coupled MCNP6.2/CTF4.0 calculations at the assembly level for steady-state calculations are presented in this study, which may support future work toward high-fidelity coupled full-core modeling capabilities. The multi-physics model may be further improved, enhanced, and expanded for both cycle depletion and transient applications. Such a multi-physics system will also be applicable to the VVER-1200 and other triangular lattice designs and support their deployment and operation safely and economically. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS1979

Studies of oceanic tectonics based on GEOS-3 satellite altimetry

Using statistical analysis, geoidal admittance (the relationship between the ocean geoid and seafloor topography) obtained from GEOS-3 altimetry was compared to various model admittances. Analysis of several altimetry tracks in the Pacific Ocean demonstrated a low coherence between altimetry and seafloor topography except where the track crosses active or recent tectonic features. However, global statistical studies using the much larger data base of all available gravimetry showed a positive correlation of oceanic gravity with topography. The oceanic lithosphere was modeled by simultaneously inverting surface wave dispersion, topography, and gravity data. Efforts to incorporate geoid data into the inversion showed that the base of the subchannel can be better resolved with geoid rather than gravity data. Thermomechanical models of seafloor spreading taking into account differing plate velocities, heat source distributions, and rock rheologies were discussed.

Poehls, K. A.↗
DOE OSTI2022

ECAR-6415 Rev 0 CFD Analysis of the Primary Coolant Apparatus Test Core with Wire Spacers for Heterogeneous Power Distributions

Primary Coolant Apparatus Test (PCAT) is a thermal-hydraulic test loop for Microreactor Applications Research Validation and Evaluation (MARVEL) reactor. The heater elements were manufactured within a straightness tolerance for the designated gap thickness of 1.0 mm, but several elements have been distorted out of tolerance during the welding process. The distortion of heater rods can lead to flow maldistribution and excessive hotspot where the gap between two heater rods is too tight. In order to secure the heater-to-heater gap in an acceptable range, wire spacers are adopted for the PCAT. The wire spacers affect the thermal-hydraulic performance of the PCAT because they enhance the flow mixing among the flow subchannels in the core region. The objectives of this ECAR is to evaluate the effects of the wire spacers on the thermal-hydraulic performance of the PCAT core region by assuming several heterogeneous power distributions.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
DOE OSTI2022

Phase 1 Specifications and preliminary sensitivity analyses of the OECD-NRC liquid metal fast reactor core thermal-hydraulics benchmark

The developments in wire-wrapped fuel bundle thermal-hydraulics research have become increasingly diverse and this makes comparisons across studies difficult. This paper describes an ongoing benchmark that will address this issue by directly comparing computational results with experimental data from two unique wire-wrapped thermal-hydraulic facilities. Preliminary subchannel sensitivity / uncertainty analyses show largely expected behavior for the presented cases, where rod diameter and friction factor show the greatest sensitivities to geometrical perturbations. Guidelines for computational fluid dynamics evaluations have been prepared and highlight the need for consolidated modeling strategies. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

NRC Multiphysics Analysis Capability Deployment (FY2021 - Part 2)

This report details the progress and activities of Idaho National Laboratory (INL) on the Nuclear Regulatory Commission (NRC) project “Development and Modeling Support for Advanced Non-Light Water Reactors.” Task 4b was completed for this report. INL developed a sample problem showing how to use Serpent 2 to calculate macroscopic cross sections for use in Griffin for a typical sodium fast reactor Unprotected Loss of Flow (ULOF) transient. The complicating factor is the relatively large axial gradient of the coolant (and hence fuel) temperature and its evolution during the transient. A 3D Griffin model of the Advanced Burner Test Reactor (ABTR) is coupled to the System Analysis Module (SAM) to perform the ULOF transient. The model includes various explicit feedback mechanisms for fast reactors, including Doppler, radial expansion from the displacement of the support plate, and axial expansion from the displacement of the fuel pins. The results for the ULOF transient are consistent with published values. We observed small effects in the transient results that arise from the superhomogenization equivalence correction of uniform and nonuniform temperature data sets, but they diminish as more dominant reactivity mechanisms are added to the model. Potential improvements to the neutronics model include: adding the differential control rod and sodium feedback mechanisms, implementing cross section re-homogenization based on the partial volume of the various materials, and enhancing the kinetics parameters. Furthermore, the fluids model only includes four subchannels to represent the entire active core due to performance limitations in SAM when attempting to model one subchannel per assembly.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

CFD analysis of a solid pin-fueled small modular fluoride salt-cooled reactor

A computational fluid dynamics (CFD) study is performed for the pre-conceptual solid pin-fueled small modular fluoride salt-cooled reactor developed by the Oak Ridge National Laboratory (ORNL). The solid and fluid regions in a 1/12th section of a fuel assembly are modeled. The solid region includes fuel and non-fuel pins, with heat generation in the active region of the fuel pins. Two different power profiles, uniform and center-peaked, are considered. The FLiBe coolant flows from the bottom to the top of the core, parallel to the bank of fuel and non-fuel pins. The k-ω shear-stress transport (SST) model is chosen as the baseline turbulence model. The effects of grid refinement, inlet turbulence specification, and turbulence models on the temperature and pressure drop predictions are studied. Turbulence model sensitivity is investigated by comparing the results from the k-ω SST model with other two-equation models (k-ω baseline or BSL and k-ε realizable) as well as with anisotropic Reynolds stress transport models (linear pressure-strain and stress-BSL). Here the results show that the choice of turbulence model has a significant impact on the pin temperature and bundle pressure drop predictions. The results from the baseline turbulence model show good agreement between the fuel pin temperatures and bundle pressure drop values predicted using a subchannel model previously developed by the authors of the present study.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Analysis of Approximations in Modeling of BWR Bundle Void Distributions

In boiling water reactors, complex heterogeneous bundle designs, control blades adjacent to the corner of bundles, and the presence of boiling can lead to complex internal void distributions. A few approximations exist to model these void distributions. They could be modeled using a 1D axial solver in which each axial node is assumed to be at an average void, or each pin cell could be modeled with its own void concentration. In the latter case, the void could be discretized in pin-centered or coolant-centered channels. The goal of this project was to quantify the effect of using the different approximations for modeling internal void distributions on neutronics calculations. Using 3D void distributions calculated with CTF, Monte Carlo Neutral Particle (MCNP) transport code models were created for GE-9 and GE-14 lattices. For each model, the internal void distribution from CTF at a given axial node was selected, and a lattice calculation was carried out with MCNP. Comparisons between models using a lattice-averaged void, or using a void distribution in coolant-centered channels, showed large differences in reactivity which in some cases were well above 1,000 pcm, and it also showed differences in normalized fission rates greater than 20%. It was also found that using a lattice average void can lead to a significant difference in the estimation of the worth of a control blade. The differences found when comparing results from models using pin-centered and coolant-centered channels were up to 200 pcm in reactivity and up to 1.4% in the normalized fission rates. In addition to these two sets of comparisons, MCNP models were set up so that each subchannel had a saturated liquid component around the fuel pins and a saturated vapor component in the center to approximate annular flow. In comparison to the models using coolant-centered subchannels, up to 1–3% differences in normalized fission rates could be found.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2026

Requirements Description of DASSH-F

This report reviews the modeling and simulation capabilities of Argonne National Laboratory’s DASSH code that is used in present reactor analysis activities. These capabilities will be used to establish the set of verification tasks necessary to verify DASSH for use on commercial projects. A similar approach was taken for the PERSENT, REBUS and DIF3D software packages. The DASSH program is a thermal analysis code designed to rapidly allow a reactor design engineer to obtain flow rates requirements that satisfy peak temperature constraints in the domain. DASSH is a follow-on development to the SE2-ANL software and SUPERENERGY-2 software that it is based upon. DASSH was designed to account for both neutron and gamma heating and is inherently connected to the GAMSOR part of the ARC suite of fast reactor analysis software. SE2-ANL is a developed piece of software from the 1980s while DASSH is a modern implementation with notable improvements in geometry handling. The most important upgrade of DASSH relative to SE2-ANL is that it can analyze multiple time points in a single run where SE2-ANL can only treat a single time point. This allows the user to understand the impact of and search the flow distribution for the entire operational period of a reactor design considering pressure drop, peak coolant and fuel temperatures, and thermal striping. DASSH has three input paths that have to be verified. The first input path builds the geometry and power distribution based upon the DIF3D model but ignores the gamma heating aspects of the problem. The second input path also builds the geometry from the DIF3D model but it takes the neutron and gamma heating distributions from GAMSOR. The third input path is to take the geometry and power distribution directly from user input (i.e. not coupled to DIF3D or GAMSOR). DASSH also has many built in correlations for material properties along with a user defined specification of the fuel, structure, and coolant properties. There are correlations for flow split, mixing, pressure drop, and heat transfer coefficients (subchannel rather than a direct methodology). In total, verification of DASSH will require an extensive testing to cover all possible user features of the software.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗