Search NASA⌕ Search

SEARCH · Search NASA

Results for “Substitutional Doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Phonon Dispersion Relation of Bulk Boron-Doped Graphitic Carbon

In this work, bulk turbostratic graphitic carbon of varying levels of disorder and chemical compositions has been synthesized by a direct synthesis method in the temperature range of 750–1100 °C, with a focus on boron incorporation within the graphitic lattice. The atomistic and electronic/vibrational structures were characterized by X-ray diffraction, energy-dispersive X-ray spectroscopy, Auger electron spectroscopy, X-ray absorption spectroscopy, and Raman spectroscopy. The phonon dispersion relation of graphitic carbon was found to be uniquely sensitive to substitutional boron doping, which perturbs the phonon structure while leaving the lattice structure unchanged. The dispersion relation of the D peak measured by Raman spectroscopy can be used to uniquely identify bulk graphitic materials containing a large content of ordered trigonal planar g-BC 3 units, which are of high interest in applications ranging from hydrogen storage to lithium-ion batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enhanced Neutron and γ-Ray Detection via 6 Li Substitution in Undoped and Tl-Doped Zero-Dimensional Perovskite Cs 3 Cu 2 I 5 Scintillators

Radiation detectors are crucial in a wide variety of research and commercial applications, such as oil and gas exploration, medical imaging, nuclear nonproliferation, and homeland security. Neutron and gamma-ray detectors are fundamental components in portal monitors at ports and border crossings, bolstering national security against radiological threats. This study presents a dual-mode scintillator, undoped and Tl-doped 6 Li-Cs 3 Cu 2 I 5 , and demonstrates its potential as a promising material for simultaneous thermal neutron and gamma-ray detection. We explore the Bridgman growth of both undoped and thallium doped Li → Cu and Li → Cs substitutional systems with various Li doping levels and assess their impact on scintillation properties. Under 662 keV gamma-ray excitation, the undoped crystals had light yields up to 35,900 ph/MeV, with energy resolutions down to 4.5%. The Tl-doped crystals performed better than the undoped crystals with light yields peaking at 65,900 ph/MeV and energy resolutions as low as 3.5%. When exposed to a moderated 252 Cf excitation source, our crystals had light yields between 102,900 and 167,200 photons per thermal neutron capture, with a full energy thermal neutron peak reaching 3 MeV in gamma equivalent energy. Pulse shape discrimination studies reveal well-separated gamma and neutron events, resulting in Figure-Of-Merit (FOM) as high as 3.7. Furthermore, these findings highlight the potential of Li-doped Cs 3 Cu 2 I 5 as a viable candidate for next-generation dual-mode scintillators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Experimental confirmation of first-principles thermal conductivity in Zirconium-doped ThO 2

The degradation of thermal conductivity in advanced nuclear fuels due to the accumulation of fission products and irradiation-induced defects is inevitable, and must be considered as part of safety and efficiency analyses of nuclear reactors. Here, this study examines the thermal conductivity of a zirconium-doped ThO 2 crystal, synthesized via the hydrothermal method using a spatial domain thermoreflectance technique. Zirconium is one of the soluble fission products in oxide fuels that can effectively scatter heat-carrying phonons in the crystalline lattice of fuel. Thus, thermal property measurements of zirconium-doped ThO 2 single crystals provide insights into the effects of substitutional zirconium doping, isolated from extrinsic factors such as grain boundary scattering. The experimental results are compared with first-principles calculations of the lattice thermal conductivity of ThO 2 , employing an iterative solution of the Peierls-Boltzmann transport equation. Additionally, the non-perturbative Green's function methodology is utilized to compute phonon-point defect scattering rates, accounting for local distortions around point defects, including mass difference changes, interatomic force constants, and structural relaxation. The congruence between the predicted results from first-principles calculations and the measured temperature-dependent thermal conductivity validates the computational methodology. Furthermore, the methodologies employed in this study enable systematic investigations of thermal conductivity reduction by fission products, potentially leading to the development of more accurate fuel performance codes.

36 - MATERIALS SCIENCE↗
DOE OSTI2022

Effect of Cationic (Na + ) and Anionic (F – ) Co-Doping on the Structural and Electrochemical Properties of LiNi 1/3 Mn 1/3 Co 1/3 O 2 Cathode Material for Lithium-Ion Batteries

Elemental doping for substituting lithium or oxygen sites has become a simple and effective technique to improve the electrochemical performance of layered cathode materials. Compared with single-element doping, this work presents an unprecedented contribution to the study of the effect of Na + /F – co-doping on the structure and electrochemical performance of LiNi 1/3 Mn 1/3 Co 1/3 O 2 . The co-doped Li 1-z Na z Ni 1/3 Mn 1/3 Co 1/3 O 2-z F z (z = 0.025) and pristine LiNi 1/3 Co 1/3 Mn 1/3 O 2 materials were synthesized via the sol–gel method using EDTA as a chelating agent. Structural analyses, carried out by X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy, revealed that the Na + and F – dopants were successfully incorporated into the Li and O sites, respectively. The co-doping resulted in larger Li-slab spacing, a lower degree of cation mixing, and the stabilization of the surface structure, which substantially enhanced the cycling stability and rate capability of the cathode material. The Na/F co-doped LiNi 1/3 Mn 1/3 Co 1/3 O 2 electrode delivered an initial specific capacity of 142 mAh g –1 at a 1C rate (178 mAh g –1 at 0.1C), and it maintained 50% of its initial capacity after 1000 charge–discharge cycles at a 1C rate.

25 ENERGY STORAGE↗
DOE OSTI2020

Heavy boron doping in superconducting carbon materials

Here we examine physical properties of heavily boron-doped sp 3 -hybridized carbon allotropes: cubic diamond, hexagonal diamond, and body centered tetragonal C 4 . The structural similarity between cubic diamond and hexagonal diamond leads to similar responses to substitutional boron doping. On the other hand, body centered tetragonal C 4 exhibits distinct structural and electronic properties because of its characteristic structure. Our study also shows that the superconducting transition temperatures up to 60 K are possible in heavily doped carbon materials despite their various atomistic structures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enhancing MnBi 2 Te 4 Stability by Doping

MnBi 2 Te 4 (MBT) is an intrinsically magnetic topological material that possesses unique properties due to the quantum Hall effect. However, the low Mn–Bi mixed antisite formation energy is detrimental to these properties as it alters the long-range magnetic ordering in the Mn layer. Therefore, it is crucial to destabilize the antisite defects in MBT while preserving the favorable electronic properties. Here, to this end, we utilized a screening approach to understand the role of dopants in the Mn and Bi sites. We find that Sc, Y, and La dopings prefer substitutions on the Bi site and significantly increase the Mn–Bi antisite defect formation energy. We find that the contribution from the empty s and d states of Sc, Y, and La around the Fermi level is insignificant. However, at the high concentration limit, the Bi–Te octahedra are significantly modified with doping, leading to important changes in the band structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Coupled Chemical and Mechanical Control of Phase Stability in Lanthanide-Substituted BiVO 4

Doping is widely used to enhance the photoelectrochemical performance of BiVO 4 , yet solubility limits and polymorphic stability constrain compositional tuning. Here, in this study, the role of trivalent cation substitution (Ln = La, Nd, Dy, Ho, Y) on pressure-induced phase transformations in Bi 1–x Ln x VO 4 (x ≤ 0.5) is described. Powder X-ray and neutron diffraction reveal that increasing Ln content stabilizes the tetragonal zircon-type polymorph under ambient conditions, while applied pressures of up to ∼5 GPa promote conversion to the monoclinic fergusonite-type polymorph. In-situ neutron diffraction on Bi 0.8 La 0.2 VO 4 shows a reversible monoclinic to tetragonal transition near 2–3 GPa with a bulk modulus of 147 GPa. The extent of conversion depends strongly on dopant identity, concentration, and synthetic route, with mixed-phase solid-state samples converting more efficiently than phase-pure coprecipitated materials. These results demonstrate pressure as a viable pathway to access metastable, doped BiVO 4 compositions beyond conventional solubility limits.

Sypkes, Kathryn I. [University of Sydney, NSW (Aus↗
DOE OSTI2023

Materials Design Directions for Solar Thermochemical Water Splitting

The sustainable, economical production of molecular hydrogen is a crucial component of a net zero-greenhouse-gas-emissions future. Solar thermochemical water splitting (STWS) offers a renewable route to hydrogen with the potential to help decarbonize several industries, including transportation, manufacturing, mining, metals processing, and electricity generation, as well as provide sustainable hydrogen as a chemical feedstock. STWS uses high temperatures generated from concentrated sunlight or other sustainable means for high-temperature heat to produce hydrogen and oxygen from steam. For example, in its simplest form of a two-step thermochemical cycle, a redox-active metal oxide is heated to ≈1700-2000 K, driving off molecular oxygen while producing oxygen vacancies in the material. The reduced metal oxide then cools (ideally with the extracted heat recuperated for re-use) and, in a separate step, comes into contact with steam, which reacts with oxygen vacancies to produce molecular hydrogen while recovering the original state of the metal oxide. Despite its promising use of the entire solar spectrum to split water thermochemically, the current estimated cost of hydrogen produced via STWS is ≈4-6× the U.S. Department of Energy (DOE) Hydrogen Shot target value of $1/kg. One contributing approach to bridging this cost gap is the design of new materials with improved thermodynamic properties to enable higher efficiencies. The state-of-the-art (SOA) redox-active metal oxide for STWS is ceria (CeO 2 ), due to its close to optimal, although too high, oxygen vacancy formation enthalpy and large configurational and electronic entropy of reduction. However, ceria requires high operating temperatures and its efficiency is insufficient. Therefore, efforts to increase the efficiency of STWS cycles have focused on further optimizing oxygen vacancy formation enthalpies and augmenting the reduction entropy via substitution or doping and materials discovery schemes. Examples of the latter include the perovskites BaCe 0.25 Mn 0.75 O 3 and (Ca,Ce)(Ti,Mn)O 3 . These efforts and others have revealed intuitive chemical principles for the efficient and systematic design of more effective materials, such as the strong correlation between the enthalpies of crystal bond dissociation and solid-state cation reduction with the enthalpy of oxygen vacancy formation, as well as configurational entropy augmentation via the coexistence of two or more redox-active cation sublattices. The purpose of this chapter is to prepare the reader with an up-to-date account of STWS redox-active materials, both the SOA and promising newcomers, as well as to provide chemically intuitive strategies for improving their cycle efficiencies through materials design – in conjunction with ongoing efforts in reactor engineering and gas separations – to reach the cost points for commercial viability. First, we will introduce the thermodynamics of STWS using a two-step, metal-oxide, thermochemical cycle with economics in mind. We also will compare the pros and cons of processes that do or do not involve phase changes. Second, we will describe the qualities that make ceria the SOA STWS redox-active material, as well as its limitations. Third, we will survey some of the most promising candidates to date in the search for materials to supplant ceria, emphasizing the post-ternary, metal-oxide-perovskite alloys. Lastly, we will enumerate and discuss the following materials design directions for STWS redox-active materials: crystal reduction potentials as a proxy for oxygen vacancy formation enthalpies, engineering the electronic and configurational entropy of reduction via f-shells and simultaneous redox, and vetting materials stability via temperature-dependent phase diagrams and melting-point prediction.

08 HYDROGEN↗
DOE OSTI2026

Atomic-scale vacancy engineering unlocks basal-plane catalytic activity in metallic WSe 2 for reversible oxygen electrocatalysis

Two-dimensional metallic transition metal dichalcogenides offer high electrical conductivity and large surface areas for electrocatalysis, yet their inherent basal planes are catalytically inert. Here, we present an atomic-scale vacancy engineering strategy to activate the basal surfaces of metallic WSe 2 for reversible oxygen electrocatalysis. This approach, based on intentionally designed substitutional metal doping, promotes the spontaneous formation of selenium vacancies while preserving the metallic 1 T′ phase, thereby creating highly reactive and oxygen-affinitive sites. Density functional theory calculations reveal that these vacancy-mediated metal complexes dramatically lower the energy barriers for initial oxygen adsorption, enabling dissociative oxygen adsorption. Operando and ex-situ spectroscopic analyses confirm that vacancy-mediated metal complexes transform into dynamic Se/W-oxide intermediates under operating conditions. Se/W-oxides on the surface experimentally and theoretically prove electrocatalytic activity and reversibility. Applying this strategy in lithium–oxygen batteries, the basal-plane activated WSe 2 shows high discharge capacities (9868 mA h g −1 , corresponding to 3947 mA h g$^{-1}_{cathode}$), impressive cycle retention over 550 cycles at 1000 mA h g −1 , and outstanding rate–capability over a wide current–density range (100–3000 mA g −1 ) during 256 cycles.

2D materials↗
DOE OSTI2020

Multimodal Analysis of Reaction Pathways of Cathode Materials for Lithium Ion Batteries

Conversion mechanism in lithium ion batteries provides higher capacity than intercalation mechanism since multiple numbers of electrons and lithium ions are associated. However, poor cycling stability, large voltage hysteresis, and low energy efficiency have been great challenges of conversion reaction. To address those issues, conversion-type electrode materials have been reformed via doping or substituting other elements. For example, iron fluorides (FeF 2 , FeF 3 ) have modified as iron oxyfluorides (FeF 1-x O x ), showing enhanced long-term stability. Furthermore, co-substituted (both anion and cation substituted) Fe 0.9 Co 0.1 OF (FeCoOF) was demonstrated excellent cycling stability. (capacity of 350 mAh g -1 at a current of 500 mA g -1 for 1000 cycles). Substituting anion and cation in iron fluoride has been suggested as an effective method to achieve better reversibility but understanding of lithiation reactions in co-substituted FeCoOF is not clear. This work takes advantage of ex-situ/ in-situ synchrotron X-ray based techniques and transmission electron microscopy to elucidate structural changes with lithium ion, which may provide fundamental insights into modifying conversion-type materials. Figure 1 presents discharge-charge curves and pair distribution function patterns acquired at each potential. As lithium ions were inserted, structural changes were noticed both at short-range and long-range. However, long-range ordering was nearly maintained even at 1 V, indicating absence of conversion reaction. Figure 2 shows lithiation induced structural evolution of a single FeCoOF nanorod observed in real time. As lithiation proceeds, the width of nanorods shows a stepwise increase, particularly A in figure 2d, which may indicate multiple steps of lithiation occur. Considering that conversion reaction takes place around 2 V in FeF 3 , co-substitution Co and O into iron fluoride may change thermodynamic features of lithiation reactions by lowering the initiation potential for conversion reaction. Instead, phase transformations occur at long-range order, which may help maintaining structural integrity during operation, eventually, achieving cycling stability.

25 ENERGY STORAGE↗
DOE OSTI2020

Electrochemical Oxidation of Metal–Catechol Complexes as a New Synthesis Route to the High-Quality Ternary Photoelectrodes: A Case Study of Fe 2 TiO 5 Photoanodes

A new electrochemical, solution-based synthesis method to prepare uniform multinary oxide photoelectrodes was developed. This method involves solubilizing multiple metal ions as metal-catechol complexes in a pH condition where they are otherwise insoluble. When some of the catechol ligands are electrochemically oxidized, the remaining metal complexes become insoluble and are deposited as metal-catechol films on the working electrode. The resulting films are then annealed to form crystalline multinary oxide electrodes. Since catechol can serve as a complexing agent for a variety of metal ions, the newly developed method can be used to prepare a variety of multinary oxide films. In the present study, we used this method to prepare n-type Fe 2 TiO 5 photoanodes and investigated their photoelectrochemical properties for use in a photoelectrochemical water splitting cell. We also performed a computational investigation with two goals. The first goal was to investigate small electron polaron formation in Fe 2 TiO 5 . Charge transport in most oxide photoelectrodes involves small polaron hopping, but small polaron formation in Fe 2 TiO 5 has not been examined prior to this work. The second goal was to investigate the effect of substitutional Sn doping at the Fe site on the electronic band structure and the carrier concentration of Fe 2 TiO 5 . Here, the combined experimental and theoretical results presented in this study greatly improve our understanding of Fe 2 TiO 5 for use as a photoanode.

14 SOLAR ENERGY↗
DOE OSTI2022

In Situ Studies of the Swelling by an Electrolyte in Electrochemical Doping of Ethylene Glycol-Substituted Polythiophene

Organic mixed ionic electronic conductors (OMIECs) have the potential to enable diverse new technologies, ranging from biosensors to flexible energy storage devices and neuromorphic computing platforms. However, a study of these materials in their operating state, which convolves both passive and potential-driven solvent, cation, and anion ingress, is extremely difficult, inhibiting rational material design. In this report, we present a novel approach to the in situ studies of the electrochemical switching of a prototypical OMIEC based on oligoethylene glycol (oEG) substitution of semicrystalline regioregular polythiophene via grazing-incidence X-ray scattering. Here by studying the crystal lattice both dry and in contact with the electrolyte while maintaining potential control, we can directly observe the evolution of the crystalline domains and their relationship to film performance in an electrochemically gated transistor. Despite the oEG side-chain enabling bulk electrolyte uptake, we find that the crystalline regions are relatively hydrophobic, exhibiting little (less than one water per thiophene) swelling of the undoped polymer, suggesting that the amorphous regions dominate the reported passive swelling behavior. With applied potential, we observe that the π–π separation in the crystals contracts while the lamella spacing increases in a balanced fashion, resulting in a negligible change in the crystal volume. The potential-induced changes in the crystal structure do not clearly correlate to the electrical performance of the film as an organic electrochemical transistor, suggesting that the transistor performance is strongly influenced by the amorphous regions of the film.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quantum critical fluctuations in an Fe-based superconductor

Abstract Quantum critical fluctuations may prove to play an instrumental role in the formation of unconventional superconductivity. Here, we show that the characteristic scaling of a marginal Fermi liquid is present in inelastic light scattering data of an Fe-based superconductor tuned through a quantum critical point (QCP) by chemical substitution or doping. From the doping dependence of the imaginary time dynamics we are able to distinguish regions dominated by quantum critical behavior from those having classical critical responses. This dichotomy reveals a connection between the marginal Fermi liquid behavior and quantum criticality. In particular, the overlap between regions of high superconducting transition temperatures and quantum critical scaling suggests a contribution from quantum fluctuations to the formation of superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Modified Calcium Manganites for Thermochemical Energy Storage Applications

CaAl 0.2 Mn 0.8 O 3-δ (CAM28) and CaTi 0.2 Mn 0.8 O 3-δ (CTM28) are perovskite metal oxides developed for high-temperature thermochemical energy storage (TCES) applications, e.g., in support of air Brayton power generation. Previous reports for these compounds focus on the equilibrium non-stoichiometry (δ) as a function of temperature and oxygen partial pressure (pO 2 ) and the endotherm (or exotherm) accompanying changes in δ resulting from thermal reduction (or re-oxidation). Herein, we report results for elemental substitution and doping (Al, Co, Fe, La, Sr, Ti, Y, Zn, and Zr) of calcium manganites (CM) that establish the preference for CAM28 and CTM28. Techniques employed include conventional (screening and equilibrium) and ballistically heated multi-cycle thermogravimetric analysis (TGA), conventional and high temperature ( in-situ ) X-ray diffraction (XRD), and differential scanning calorimetry (DSC). Forward-looking results for A-site Y-doped materials, e.g., Ca 0.9 Y 0.1 MnO 3-δ (CYM910), establish a route to increasing the reduction enthalpy relative to CAM28 and CTM28, albeit at the expense of increased reduction temperatures and raw materials costs. A thermodynamic model presented for CAM28, but extendable to related materials, provides values for the reaction enthalpy and extent of reduction as a function of temperature and oxygen partial pressure for use in design efforts. Taken as a whole, the results support the choice of Al-doped CaMnO 3-δ as a low-cost material for TCES in a high temperature air Brayton application, but point the way to achieving higher stored energy densities that could lead to overall cost savings.

Miller, James E.↗
DOE OSTI2020

22 K superconductivity in Ba Fe 2 As 2 exposed to F 2

Several previous reports on undoped AEFe 2 As 2 (AE = alkaline earth metal) point to drops in resistivity indicative of possible superconductivity and some degree of Meissner effect in the magnetic susceptibility. Also, based on both resistivity and magnetic susceptibility measurements, controlled exposure to water vapor has been shown to induce superconductivity in AEFe 2 As 2 . In our study, BaFe 2 As 2 single crystals grown using the self-flux method showed a full resistive drop around 22 K and magnetic shielding, when exposed to fluorine gas postgrowth. Our measurements indicate electron (donor) doping via atomic substitution of F for As is concurrent with the observed superconductivity, which sheds light on the likely effect of exposure to water vapor in previous work. Like doping experiments (such as substitution of Co for Fe, P for As, or K for Ba) in AEFe 2 As 2 to date, the present work is consistent with suppression of the spin density wave transition coincident with the appearance of T c . In addition to answering the puzzle of superconductivity in undoped or water vapor exposed AEF 2 As 2 , our results also represent a fast (20 min exposure to 5% F in He) and reliable method suitable for inducing superconductivity in thin films of AEFe 2 As 2 . As a result, some supportive work on BaFe 2 As 2 exposed to Cl 2 is also presented.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Hole doping and electronic correlations in Cr substituted BaFe$_{2}$As$_{2}$

For a significant composition range, the suppression of the spin density wave transition temperature (T SDW ) in Cr- and Mn-substituted BaFe 2 As 2 (CrBFA and MnBFA, respectively) coincides as a function of Cr/Mn content, despite the distinct electronic effects of these substitutions. Additionally, for any Cr/Mn content superconductivity (SC) is absent and this topic is particularly less explored in the case of CrBFA. Here, in this work, we employ angle-resolved photoemission spectroscopy (ARPES) and combined density functional theory plus dynamical mean field theory (DFT+DMFT) to address the evolution of the Fermi surface (FS) and electronic correlations in CrBFA. Our findings reveal that incorporating Cr leads to an effective hole doping of the states near the FS, which is well described within the virtual crystal approximation (VCA). Moreover, analysis of the ARPES spectra of the bands with main d yz -orbital character reveals a fractional scaling of the imaginary part of self-energy as a function of the binding energy, a signature property of Hund's correlations. Our DFT+DMFT calculations support these experimental findings. We conclude that CrBFA is a correlated electron system for which the changes in the FS as a function of Cr are unrelated to the suppression of T SDW . In addition, we suggest that the absence of SC is primarily due to the competition between Cr local moments and the Fe-derived itinerant spin fluctuations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Solvent-induced electrochemistry at an electrically asymmetric carbon Janus particle

Chemical doping through heteroatom substitution is often used to control the Fermi level of semiconductor materials. Doping also occurs when surface adsorbed molecules modify the Fermi level of low dimensional materials such as carbon nanotubes. A gradient in dopant concentration, and hence the chemical potential, across such a material generates usable electrical current. This opens up the possibility of creating asymmetric catalytic particles capable of generating voltage from a surrounding solvent that imposes such a gradient, enabling electrochemical transformations. In this work, we report that symmetry-broken carbon particles comprised of high surface area single-walled carbon nanotube networks can effectively convert exothermic solvent adsorption into usable electrical potential, turning over electrochemical redox processes in situ with no external power supply. The results from ferrocene oxidation and the selective electro-oxidation of alcohols underscore the potential of solvent powered electrocatalytic particles to extend electrochemical transformation to various environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗