Search NASA⌕ Search

SEARCH · Search NASA

Results for “Supersonic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Numerical minimization of neoclassical poloidal viscosity for supersonic equilibria in tokamak geometry

Extensive experimental evidence has shown that the presence of poloidal flow in tokamaks can dramatically improve transport properties. However, theory indicates that poloidal flows are damped by poloidal viscosity, thus necessitating external drivers, such as neutral beam injection or radio frequency heating. In this work, ideal magnetohydrodynamic equilibria are calculated via the FORTRAN code FLOW [Guazzotto et al., Phys. Plasmas 11, 604 (2004)] and a postprocessor is used to estimate the neoclassical poloidal viscosity. The equilibrium inputs, which correspond to intuitive physical quantities, are then numerically optimized to reduce a viscosity figure of merit. We present supersonic equilibria in tokamak geometry with minimized neoclassical poloidal viscosities for various velocity free function inputs, plasma aspect ratios, and collisionality regimes. Benchmarks are made against an analytic theory as well as a classical expression of poloidal viscosity. Numerical confirmation of the analytic theory is obtained in the high aspect ratio and high collisionality limit. Good agreement is also seen near the plasma core and edge, with discrepancies arising in the intermediate region. Outside of these limits, rotation input function profiles are found that provide ∼order of magnitude improvements over the analytic theory, with additional progress being made toward predictions for tokamak-relevant equilibria.

Physics↗
DOE OSTI2023

Supersonically expanded sodium metal-dilute halogen gas interactions. The importance of reaction populated and energy storing reservoir states and population inversion created amplification in Na2

The reactions of Cl, Br, and I with Nan=2,3 produced in a supersonic expansion form Na2* and Na* excited states extending across the visible and ultraviolet regions. Emission in the region extending from 410 to 600 nm indicates selectively formed excited state Na2 emission features. Experimental evidence suggests that this emission is associated with Na3 + X reactions. Broadband (0.5 cm−1) laser measurements demonstrate gain (population inversion) for select features at∼524–528(1%), ∼492(0.3%), and ∼458.7–461(0.8%) nm. Single mode (0.007 cm−1) measurements extending from 528.03 to 527.63 nm demonstrate amplification involving five to six individual rovibronic levels with a maximum gain close to 3% recorded at 527.9 nm. The observed gain is associated with select transitions from levels of the Na2 11Πu state populated, via identified curve crossings, through collision induced transfer from long-lived Na2 21Σg+ and 11Πg reservoir states. Collision induced population buildup in the lowest vibrational levels of these reservoir states and collision induced transfer to the Na2 11Πu state create a population inversion in transitions to the X 1Σg+ state of Na2. The observed amplification is aided by rapid vibrational and rotational relaxation in both the Na2 ground and excited reservoir states producing amplifiers in the visible region like the HF amplifier in the infrared. This study suggests the importance of reaction populated and energy storing long-lived reservoir states in small sodium molecule combustion processes and indicates the potential for providing new short wavelength visible and ultraviolet amplifiers for future laser-based chemical propulsion concepts.

Chemistry↗
DOE OSTI2024

Multi frame radiography of supersonic water jets interacting with a foil target

Pulsed-power-driven underwater electrical explosion of cylindrical or conical wire arrays produces supersonic water jets that emerge from a bath, propagating through the air above it. Interaction of these jets with solid targets may represent a new platform for attaining materials at high pressure (>1010 Pa) conditions in a university-scale laboratory. However, measurements of the internal structure of such jets and how they interact with targets are difficult optically due to large densities and density contrasts involved. We utilized multi-frame x-ray radiographic imaging capabilities of the ID19 beamline at the European Synchrotron Radiation Facility to explore the water jet and its interaction with a 50 μm thick copper foil placed a few mm from the surface of water. The jet was generated with a ∼130 kA-amplitude current pulse of ∼450 ns rise time applied to a conical wire array. X-ray imaging revealed a droplet-type structure of the jet with an average density of <400 kg/m3 propagating with a velocity of ∼1400 m/s. Measurements of deformation and subsequent perforation of the target by the jet suggested pressures at the jet–target interface of ∼5 × 109 Pa. The results were compared to hydrodynamic simulations for better understanding of the jet parameters and their interaction with the foil target. These results can be used in future research to optimize the platform, and extend it to larger jet velocities in the case of higher driving currents supplied to the wire array.

Physics↗
DOE OSTI2020

Efficiency of using nitrogen trifluoride as an oxidiser in a supersonic continuous-wave chemical HF laser

We report the results of an experimental study of possible ways to increase the efficiency of using NF{sub 3} nitrogen trifluoride as an oxidiser in an atomic fluorine generator of a supersonic continuous-wave chemical HF laser with a flat nozzle block corresponding to the nozzle – nozzle reagent mixing scheme. As such ways, we consider increasing the residence time of reagents in the combustion chamber and rising temperature in the chemical reaction zone. Comparison of specific energy characteristics of an HF laser operating with the use of the studied (NF{sub 3}) and ‘basic’ (F{sub 2}) oxidisers shows that the replacement of molecular fluorine with nitrogen trifluoride during the burning with deuterium in the combustion chamber of an atomic fluorine generator with allowance for the proposed measures leads to a reduction in the specific laser energy output by no more than 23 % – 24 % at high burning completeness. (paper)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Comparative analysis of characteristics of a supersonic cw chemical HF laser on molecular fluorine and nitrogen trifluoride

We have experimentally studied the characteristics of a supersonic cw chemical HF laser with a flat nozzle array based on a nozzle – nozzle reagent mixing scheme operating with the use of F{sub 2} – D{sub 2} – He and NF{sub 3} – D{sub 2} – He fuel compositions in an atomic fluorine generator. The active medium flow field pattern, its gas-dynamic characteristics, and the laser radiation spectrum are considered. The comparison of these characteristics has made it possible to establish a strong impact on the flow field (lasing zone length) of the chemical composition of the combustion products from the atomic fluorine generator. The gas-dynamic parameters of the active medium formed by using a NF{sub 3} – D{sub 2} – He fuel have turned out to be less acceptable in terms of the gas flow pressure recovery than in the case of F{sub 2} – D{sub 2} – He fuel, while the radiation spectrum was more preferable from the viewpoint of passing through the atmosphere. (paper)

36 MATERIALS SCIENCE↗
DOE OSTI2024

Prediction of regional infrasound produced by supersonic sources using a ray-based Mach cone source

The geometry of the Mach cone produced by a supersonic source is analyzed and mapped into initial conditions used in acoustic ray tracing. The resulting source model is combined with spherical geometry ray tracing methods to enable propagation simulations for infrasonic signals produced by bolides, space debris, rockets, aircraft, and other fast-than-sound sources out to typical infrasonic observation distances of hundreds or thousands of kilometers. Idealized linear and parabolic trajectories typical of bolides and rockets, respectively, are used to demonstrate the calculation of regional infrasonic signals produced by such sources and characteristics of the radiated infrasonic waves are found to vary strongly with the geometry of the trajectory and atmospheric structure. Predicted regional infrasonic signals are compared with those observed from a November 2020 bolide that passed over Scandinavia using a combination of institutionally maintained infrasound stations and “citizen scientist” data from the Raspberry Shake data repository.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Prediction of regional infrasound produced by supersonic sources using a ray-based Mach cone source

The geometry of the Mach cone produced by a supersonic source is analyzed and mapped into initial conditions used in acoustic ray tracing. The resulting source model is combined with spherical geometry ray tracing methods to enable propagation simulations for infrasonic signals produced by bolides, space debris, rockets, aircraft, and other fast-than-sound sources out to typical infrasonic observation distances of hundreds or thousands of kilometers. Idealized linear and parabolic trajectories typical of bolides and rockets, respectively, are used to demonstrate the calculation of regional infrasonic signals produced by such sources and characteristics of the radiated infrasonic waves are found to vary strongly with the geometry of the trajectory and atmospheric structure. Predicted regional infrasonic signals are compared with those observed from a November 2020 bolide that passed over Scandinavia using a combination of institutionally maintained infrasound stations and “citizen scientist” data from the Raspberry Shake data repository.

42 ENGINEERING↗
DOE OSTI2024

Investigating Gas Dynamics and Reactions in Supersonic Jets

UF6 is highly reactive and readily hydrolyzes in contact with moisture to form uranyl fluoride (UO2 F2 ) and hydrofluoric acid (HF), however there is disagreement between experimental and computation investigations into the intermediates of the reaction. • As the hydrolysis reaction occurs at very fast time scales, it is difficult to investigate the intermediates and reaction kinetics experimentally. • Previous experiments at SRNL have had some success at halting and studying the UF6 hydrolysis reaction using cryogenic techniques, however isotopic substitution studies limit possible identity of intermediate compounds. • Primary goal of this project is to capture and study reaction intermediates produced during the gas phase hydrolysis of UF6 via supersonic expansion.

Waldron, Abigail M.↗
DOE OSTI2024

Towards a quantitative understanding of bonding in supersonic single particle impacts: A three-dimensional FIB-SEM exploration

Particle bonding is crucial to coating quality in cold spray, but it has been a challenge to accurately quantify bonding even in single particle impacts. This paper uses FIB-SEM to explicitly map the particle-substrate interface for Cu-on-Cu single microparticle impacts in a full 3D rendering that spans a wide range of impact velocities. This approach permits a detailed quantification of the total bonding area and all of its associated components. In addition to revealing why prior 2D characterization efforts have missed important details about impact bonding, these data quantitatively reveal the evolution of bonding from its onset at the “critical velocity” V cr (where bonding is generally poor, ∼6 %) to its peak at around 1.3‧V cr (where almost 90 % of the particle bonds). Further increase in the velocity to 1.5‧V cr and beyond finds the onset of hydrodynamic penetration and a decrease in bonding. These data then support the development of a simple analytical model based on oxide rarefication and extrusion of bare metal through gaps in the oxide layer as driving the development of bonding. As a result, the model reproduces the experiments and provides guidance on optimization of bonding as a function of material and process parameters.

Analytical methods↗
DOE OSTI2024

Supersonic hot jet ablative testing and analysis of boron nitride nanotube hybrid composites

Boron nitride nanotubes (BNNTs) are high-strength, high-modulus nanotubes with high thermal and oxidative stabilities. Two hybrid composites were prepared with satin weave carbon fiber (CF) and resole-type phenolic resin: one with surface layers of BNNTs and one with alternating interlayers of BNNTs. The samples were subjected to hot jet tests that simulate realistic high-pressure-temperature conditions to understand the behavior of BNNTs under high-pressure erosion. Adding BNNTs to CF/phenolic laminates enhanced the ablation resistance by reinforcing the char material and mitigated localized thermal damage. Hybrid laminates exhibited up to 14% lower weight loss, 55% increase in flexural modulus, higher thermal diffusivity, and improved char yield and microstructure compared to CF/phenolic samples. The surface layer hybrid had many surviving nanotubes reinforcing the char and crystalline oxide structures that could mitigate further oxygen diffusion. Further, various characterization methods were used to deduce possible mechanisms and their products, indicating that BNNTs could serve as growth templates for direct crystalline boron oxide formation. Overall, hybrid BNNT/CF/phenolic laminates displayed better ablation resistance and favorable microstructure evolution under high-pressure conditions.

42 ENGINEERING↗